$100 - $150

*Please note we can only ship RKI products to customers within the United States

6-Way Tilt/Swivel Bracket

90496-04 Adjustable Angle Bimetal Thermometer, 3" Dial, 24" L/50-550F/10-290C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

08113-29 Flexible Thermocouple Probe, PTFE Insulated Wire, 23G, Ungrounded, Stripped Leads, Type T; 36" L by Digi-Sense

Fiberglass wire is not recommended for use in moist or wet environments.

Exposed-junction probes are not recommended for use with aqueous solutions.

Do not subject type J exposed-junction probes to moisture as they will rust

• Response Time: 1 seconds or greater
• All insulated-wire probes include straight insulated cable with no handle and stripped leads.
• Custom designs or changes to this product are available upon request

93830-05 Magne-Couple Type K Industrial Probe, with 3" Pigtail by Digi-Sense

Magne-Couple is a thermocouple designed for temporary surface monitoring of any ferrous surface. It attach's to the surface by utilizing a powerful Alnico Magnet with a holding force of 16 lbs, and is capable of withstanding up to 1000 degrees F without degradation. The magnet forces the spring loaded sensing tip into contact with the surface being monitored.

08009-51 ASTM Like Liquid-In-Glass Thermometer, 89C / Solidification Point, 76mm Immersion, -20 to 10C, Organic Liquid Fill by Digi-Sense

These thermometers are precision manufactured to conform to ASTM E-1 specifications except for not being mercury filled. Designed for use in quality control laboratories or when mercury filled thermometers can not be used but where ASTM standards are still needed. ASTM established thermometer standards suited for special applications, and assigned an ASTM number according to each specification.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered.

• Designed for specific ASTM (American Society for Testing and Materials) test methods
• Nonmercury blue spirit liquid

GLUT-WT Glutatect WT Test Kit, 20-100 ppm by AquaPhoenix

• 20-100 ppm, 30 ampoules

The Glutatect WT Test Kit measures glutaraldehyde utilizing a 5 minute test procedure and measures 20 to 100 ppm glutaraldehyde "activities."

6400 Petrifilm, Aerobic Count Plates, 100 plates by AquaPhoenix

3M™ Petrifilm™ Aerobic Count Plates (U.S. AOAC®) are sample-ready to use and help determine total aerobic bacteria populations in testing processes. The indicator dye and built in grid allows for fast accurate identificaiton of colonies, within 48 hours. A survey of 274 plants who converted to 3M™ Petrifilm™ Plates from traditional agar methods found an average labor savings of 45% and an average increased technician efficiency of 80%. Our full line of easy-to-use 3M™ Petrifilm™ Plates can provide you with many benefits over traditional methods. In addition, 3M™ Petrifilm™ Aerobic Count Plates can be used to aerobically or anaerobically enumerate lactic acid bacteria in food and environmental samples.

18526-60 Economic Cryogenic Probe, 100 Ohm, 3" L, Stripped, .188 Dia, 5ft FEP by Digi-Sense

Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Temperature ranges from -321°F - +300°F (-196°C to - +150°C)
• Time Constant: 3 seconds or greater
• Maximum error for probe assembly is ±1.1°C + 0.35% of reading below 300°F,. Alpha coefficient is 0.003850 U/U/°C (DIN IEC 751). Resistance at ice point (0°C) is 100 omega.
• Custom designs or changes to this product are available upon request

PH4500BL pH 4.0 Calibration Solution 500ml. carton of 6 by Bluelab

Calibration and conductivity standard solutions... a must in every grower's toolbox.

The Bluelab® calibration and conductivity standard solutions are essential for use with all Bluelab® products.

Bluelab® solutions are manufactured specifically for Bluelab® products and are referenced to high laboratory standards to ensure your Bluelab® products last longer and maintain accuracy.

08009-28 ASTM Like Liquid-In-Glass Thermometer; 49C / Stormer Viscosity, 65mm Immersion, 20 to 70C, Organic Liquid Fill by Digi-Sense

These thermometers are precision manufactured to conform to ASTM E-1 specifications except for not being mercury filled. Designed for use in quality control laboratories or when mercury filled thermometers can not be used but where ASTM standards are still needed. ASTM established thermometer standards suited for special applications, and assigned an ASTM number according to each specification.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered.

• Designed for specific ASTM (American Society for Testing and Materials) test methods
• Nonmercury blue spirit liquid

08009-43 ASTM Like Liquid-In-Glass Thermometer, 84C / Fuel Rating Orifice Tank, 249mm Immersion, 24 to 80C, Organic Liquid Fill by Digi-Sense

These thermometers are precision manufactured to conform to ASTM E-1 specifications except for not being mercury filled. Designed for use in quality control laboratories or when mercury filled thermometers can not be used but where ASTM standards are still needed. ASTM established thermometer standards suited for special applications, and assigned an ASTM number according to each specification.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered.

• Designed for specific ASTM (American Society for Testing and Materials) test methods
• Nonmercury blue spirit liquid

18525-41 Type T Thermocouple Probe Insulated Wire Probe with Sealed Tip with Mini-Connector, 20ft L 24 Awg by Digi-Sense

Do not subject type J exposed-junction probes to moisture as they will rust

• Each Probe is hermetically sealed and tested to 25psi
• Can be used for applications requiring an isolated junction.
• Response Time: 0.75 seconds or greater
• All insulated-wire probes include straight insulated cable with no handle and feature ANSI color-coded mini connectors: type J - black, type K - yellow, and type T - blue.
• Custom designs or changes to this product are available upon request

PS20 20" PVC Shutter by Schaefer

Schaefer PVC shutters are maintenance free, resistant to rust and corrosion and have an efficient, aerodynamic design. Louvers are curved for a tight seal when closed and corners are fused together for exceptional strength and durability. Optional integrated shutter motors available.

The 115 volt, 1/2 amp gear motor and arm assembly opens shutter when energized and closes shutter when de-energized. Nylon bearings will not corrode and never needs lubrication.

VK12 Standard Pole Mount