$100 - $150

WD-35805-01 Double-junction, Epoxy-body, Gel-filled pH Electrode (Use with all OAKTON pH meters except pH Wand and pH/CON 10) by Oakton

Use with any meter with a BNC connector

Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

All electrodes have a BNC connector, and are 12 mm dia with a 3 ft cable (except submersible electrode, which is 25 mm dia with a 10 ft cable). We offer many other pH and ORP electrodes for specialty applications.

• Each 12 mm electrode includes a FREE electrode saver bottle to extend electrode life
• Use ORP electrodes with meters that read mV to take REDOX readings

H-10-113-20 MEK Colorimetric Gas Detection Tube, 0.02 - 0.6 % (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

GHS1211 Corrosive Hazard Class Pictogram Label (1"), 1120/Pad by GHS Safety

Provide your employees with a quick and easy way to identify Personal Protective Equipment & Hazard Class requirements. GHS labels are manufactured on a high gloss paper stock with pressure sensitive adhesive for ease of application and longer durability. Designed to be used with you in house labeling system where color printing isn't an option.

Make clean, professional looking labels in minutes. Labels are printed in sheets and padded with a cardboard backer for ease of use. Each sheet is perforated to allow removal when completed.

Labels are sold in pads. 1" diameter labels come 1,120 labels per pad. 1/2" diameter labels come 1,820 per pad.

03313-86 Traceable® Jumbo Display Thermohygrometer with Calibration by Digi-Sense

This thermohygrometer is perfect for both indoor and outdoor applications. Large, 1 1/8"' H display can be read as far as 35 feet away! Unit features ABS plastic housing. Wall-mount the thermohygrometer or use the flip-open stand.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Features

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data, submersible temperature sensor on a 10-ft cable and one AAA battery.

SCT-108.007.01 SCT-TANK-1 SCT Dosing Tank (LDPE) - 100 Litre by ScichemTech

SCT dosing tanks are with red screw fitting lid with a raised section to mount dosing pumps, mixers, level sensors etc. Made of high quality LDPE (low density polyethylene) cylindrical in shape

0560 6054 605-H2 Humidity Stick with Wet Bulb by Testo

The thermohygrmeter you can bend. Small, compact and accurate. The long-term stable sensor guarantees correct measurement results even after years.

• Dewpoint calculation from -20 to +50 °Ctd
• Long-term stable Testo humidity sensor
• Ideal for measurements in ducts
• Display can be angled for easy readout of measurement values
• Air moisture, air temperature and dew point

SB-7250-P-PK Bottle, Nalgene Sample Bottle 250 mL, 12/pk by AquaPhoenix

Nalgene® Wide-Mouth HDPE bottles are durable, translucent and leakproof. These general-purpose bottles are ideal for collecting samples in the lab or field. Available in 250 or 500 mL.

MC110 pH Monitor by Milwaukee

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point.

All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.

Professional pH monitor especially designed for use with aquariums.

• User selectable Hi/Low Set Point
• Manual 2 points calibration
• Visual LED alarm
• Supplied with 12 VDC adapter, mounting kit, and 20ml pH 7.01 calibration solution
• Double junction pH electrode with 2m cable (BNC connector)

*Please note we can only ship RKI products to customers within the United States