Oakton

WD-35635-15 T-100IR Portable Infrared Turbidity Meter Kit by Oakton

The Oakton T-100 series portable turbidity meters feature five calibration points—0 NTU, 20 NTU, 100 NTU, 400 NTU, and 800 NTU. The 0 NTU uses laboratory distilled or deionized water, while the other four calibration points are configured using high molecule polymer standard solutions included in the kits. The meters also include normal and continuous measurement modes, parameter setup, data recall, real-time clock, calibration date check, automatic power off, and low voltage indication. The continuous measure mode allows you to automatically generate average, maximum and minimum measured values in a data storage interface, suitable for sample solutions with rapid settling and continuous measurement changes.

The large TFT color screen displays a blue background for measurement mode, green background for calibration mode, and features operation guides for easy calibration and measurement. Up to 200 sets of data can be stored on the meter. A USB interface cable can transfer this data to your computer for future analysis.

• Auto-ranging from 0 to 1000 NTU (FNU)
• Stores up to 200 sets of data
• Suitable for field use—meets IP67 water-resistant requirements
• Infrared light source delivers high accuracy across entire range
• Meets performance criteria as specified by ISO 7027 (DIN EN 27027) method

Includes

Six 25 x 60 mm sample test cuvettes, five 60-mL polymer standard calibration solutions (0.0, 20, 100, 400, and 800 NTU), 10 mL of silicone oil, microfiber wiping cloth, PCLink software on USB flash drive, hard carrying case, rechargeable Lithium battery and USB cable with power adapter.

WD-35625-40 Food Safety Infrared IR Thermometer by Digi-Sense

A combination contact/noncontact thermometer for all food applications

Check critical food temperatures and monitor HACCP food safety zones with this combination contact/noncontact thermometer. LED s rapidly indicate if food temperature is in the bacterial growth safety zone. Green lights indicate safe temperatures below 40°F (4°C) and above 140°F (60°C). Red light indicates the HACCP danger zone between 40 to 140°F (4 to 60°C). The contact probe swings out for internal temperature checks, then folds in for storage. IR mode provides quick, noncontact surface measurements and stores maximum reading. Target illumination indicates target measurement area and is ideal for close working distances of 2 to 12 . Countdown timer with alarm monitors cooking and cooling intervals and HACCP exposure times set countdown timer to a maximum of 8 hours.

• Go/no-go LEDs provide quick check of HACCP food zones
• Sealed IP54 housing make for easy cleaning

WD-35634-60 PCTSTestr™ 5 Waterproof Pocket Tester by Oakton

Save money by replacing sensor, not the tester

Measuring water quality can be challenging. You need an instrument that is reliable over and over again. With the Oakton Waterproof Testr 5 Series pocket testers, you not only experience consistent reliability, but you also get a pocketful of useful features and benefits. You can also stretch your budget by only replacing the single-junction sensor and keeping the tester.

• Easy to set up and use
• Intuitive interface has self-diagnostic error messages, and stable reading and battery-life indicators
• Unique colored backlight indicates operating mode
• Simple to calibrate with automatic standard recognition USA or NIST
• Rugged IP67-rated housing is waterproof, dustproof, and floats in water with sensor cap on
• Leakproof cap with fill line functions as a sample, calibration, and hydrating cup
• Uses common AAA batteries

WD-35608-51 Conductivity/TDS Cell, Epoxy Body, Platinum Sensor, 3 ft Cable, K= 10 by Oakton

Feature built-in temperature compensation

• Ultem Cells with K = 1.0 have removable a probe guard for easy cleaning

Choose from three different cell constants:

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS)
• K = 0.1 for low conductivity measurements (near or below 20 µS)

Each conductivity/TDS cell has a temperature range of 0 to 100°C.

WD-35634-54 ORPTestr® 5 Waterproof Pocket Tester by Oakton

Save money by replacing sensor, not the tester

Measuring water quality can be challenging. You need an instrument that is reliable over and over again. With the Oakton Waterproof Testr 5 Series pocket testers, you not only experience consistent reliability, but you also get a pocketful of useful features and benefits. You can also stretch your budget by only replacing the single-junction sensor and keeping the tester.

• Easy to set up and use
• Intuitive interface has self-diagnostic error messages, and stable reading and battery-life indicators
• Unique colored backlight indicates operating mode
• Simple to calibrate with automatic standard recognition USA or NIST
• Rugged IP67-rated housing is waterproof, dustproof, and floats in water with sensor cap on
• Leakproof cap with fill line functions as a sample, calibration, and hydrating cup
• Uses common AAA batteries

WD-35820-21 Industrial Conductivity Cell, 10 ft Cable, 3/4 MNPT Threaded Housing, Epoxy Body, Graphite Sensor, K= 0.1 (Use with CON 100, CON 200, CON 1000, and RES 1000 controllers) by Oakton

Feature built-in temperature compensation

• Designed for continuous in-line monitoring
• Feature stripped ends for easy wiring

Choose from three different cell constants:

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS)
• K = 0.1 for low conductivity measurements (near or below 20 µS)
• K = 0.01 for resistivity measurements (at or below 2 µS)

Install these rugged cells in a pipeline, or submerse in a tank.

Dimensions: 142 mm L x 12 mm dia. Shpg wt 0.5 lb.

WD-35613-54 ppH 5+ Meter Kit with "All-in-one" pH Electrode, pH Buffer Solutions, Sample Bottles, Rubber Boot, Batteries, and Carrying Case by Oakton

High ±0.01 pH accuracy at economical prices

The microprocessor-based pH 5+ meter is OAKTON s most economical portable pH meter, yet it gives you the same high accuracy and reliability of our other portable meters! Use this meter to take routine pH and temperature measurements. Meter includes a protective rubber boot that also acts as a meter stand.

• Includes pH 5+ Portable pH Meter with an "All-in-one" pH electrode, pH buffer solutions, sample bottles, rubber boot, batteries, and carrying case
• Reads pH and temperature
• Automatic Temperature Compensation (ATC)
• All push button operation
• Three-point pH calibration
• Auto buffer recognition
• Hold function; Auto-off
• Use with most pH electrodes with BNC connectors

WD-00653-18 1413 µS Conductivity/TDS Calibration Solution 500 mL (1-pint) Bottle by Oakton

Choose from economical 1-pint solution bottles or individually sealed Singles calibration pouches.

All OAKTON Conductivity/TDS calibration solutions are cross checked using different test methods, premixed, and ready to use.

OAKTON conductivity/TDS solution bottles are labeled with the name and CAS number for all ingredients to conform with Right-to-Know requirements, and includes an MSDS. Solutions come in one pint bottles. Dimensions: 7.75"H x 2.25" dia. Shpg wt: 1.1 lbs.

OAKTON Conductivity Singles pouches are convenient, air-tight pouches with high-precision calibration standards. Ideal for field use-take them to your test site for on-the-spot calibration. Pouches are labeled with equivalent values for ppm in KCl, NaCl and 442 and Conductivity values at 25°C and CAS numbers for Right-to-Know requirements. Each box contains twenty 20 mL pouches. Dimensions: 4.5"L x 5"W x 4.5"H (box). Shpg wt 1 lb per box.

• NIST traceable materials
• ±1% accuracy at 25°C

WD-27504-10 Cole-Parmer® Combination Ion-Selective Electrode (ISE), Copper (Cu+2) by Oakton

Whether your application involves end point determinations in potentiometric titrations or continuous monitoring of specific ions, we can help you find the right electrode for the job. These fast and accurate electrodes do not require an external reference - they're easier to use than separate sensing and reference half-cell electrodes. All Cole-Parmer electrodes are double-junction combination ion-selective electrodes and are convenient to use in places where two electrodes won't fit. All electrodes include a 30-mL bottle of reference solution, a reference filling pipette, 1-m cable, BNC connector, and an instruction manual. Solid-state electrodes also have twelve polishing strips.

Economy Epoxy Electrodes have a durable epoxy body and are well-suited for portable field applications. Outer reference chamber is silver-free and resists contamination. These electrodes are refillable.

Laboratory Glass Electrodes are double-junction in design, with a glass body that provides high-quality measurements for your laboratory applications. Improved glass seal enhances performance and reliability. Sealed inner junctions and refillable outer junctions accommodate special reference fill solutions - ideal for low-concentration measurements. Use electrodes with a meter that has a resolution of 0.1 mV for the most accurate results. Many meters in our "pH/Ion Meters" section have 0.1 mV resolution; several also give direct readings in ppm. For monitoring ions not listed below, call our Application Specialists for more electrode application information.

• Cost-effective choices that are easy to use
• Easily fit into small spaces - no additional reference electrode is needed
• Copper (Cu⁺²) ISE with epoxy body

WD-27502-03 Cole-Parmer® Ion-Selective Electrode (ISE), Ammonium, Double-Junction, BNC by Oakton

Whether your application involves end point determinations in potentiometric titrations or continuous monitoring of specific ions, we can help you find the right electrode for the job. These fast and accurate electrodes do not require an external reference - they're easier to use than separate sensing and reference half-cell electrodes. All Cole-Parmer electrodes are double-junction combination ion-selective electrodes and are convenient to use in places where two electrodes won't fit. All electrodes include a 30-mL bottle of reference solution, a reference filling pipette, 1-m cable, BNC connector, and an instruction manual. Solid-state electrodes also have twelve polishing strips.

Economy Epoxy Electrodes have a durable epoxy body and are well-suited for portable field applications. Outer reference chamber is silver-free and resists contamination. These electrodes are refillable.

Laboratory Glass Electrodes are double-junction in design, with a glass body that provides high-quality measurements for your laboratory applications. Improved glass seal enhances performance and reliability. Sealed inner junctions and refillable outer junctions accommodate special reference fill solutions - ideal for low-concentration measurements. Use electrodes with a meter that has a resolution of 0.1 mV for the most accurate results. Many meters in our "pH/Ion Meters" section have 0.1 mV resolution; several also give direct readings in ppm. For monitoring ions not listed below, call our Application Specialists for more electrode application information.

• Cost-effective choices that are easy to use
• Easily fit into small spaces - no additional reference electrode is needed
• Ammonium (NH₄⁺) ISE with glass body

WD-35614-30 pH 150 Portable Waterproof pH Meter and Electrode by Oakton

The pH 150 meter offers a rugged, waterproof housing with built-in stand at an economical price. The large, three-line LCD lets you simply view the pH or mV measurement simultaneously with temperature and calibration % slope. Auto buffer recognition identifies the correct pH buffer for rapid, reliable calibration.

Calibrate meter with up to six points from USA, NIST, and DIN pH buffer sets. Automatic temperature compensation (ATC) ensures measurement accuracy even in fluctuating temperatures. Select temperature readout from C/F to suit your application.

Meter features include ready (stability) indicator, smart averaging, hold function, calibration alarm (visible), battery life indicator, and electrode status. Data storage allows manual storage and recall of 150 data sets, as well as the log of the last calibration data.

• Intuitive, user-friendly icons--electrode status displays pH slope
• Grip-Clip holder quickly and easily secures the electrode to your beaker
• Expanded data logging for up to 150 data sets
• mV offset for calibration of ORP standards, zeroing mV, and pH diagnostics
• 700 hour battery-life, or optional AC power adapter
• Built-in stand and wall mount option allow for easy benchtop measurement

WD-35805-24 Submersible pH Electrode, Double-junction, Gel-Filled, ABS Plastic-body with 10 ft Cable (Use with all OAKTON pH meters except pH Wand and pH/CON 10) by Oakton

Use with any meter with a BNC connector

Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

All electrodes have a BNC connector, and are 12 mm dia with a 3 ft cable (except submersible electrode, which is 25 mm dia with a 10 ft cable). We offer many other pH and ORP electrodes for specialty applications.

• Each 12 mm electrode includes a FREE electrode saver bottle to extend electrode life
• Use ORP electrodes with meters that read mV to take REDOX readings

WD-35805-27 Gold Disk Sensor, Double-junction, Epoxy-body, Gel-filled ORP Electrode (Use with all OAKTON pH meters except pH Wand and pH/CON 10) by Oakton

Use with any meter with a BNC connector

Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

All electrodes have a BNC connector, and are 12 mm dia with a 3 ft cable (except submersible electrode, which is 25 mm dia with a 10 ft cable). We offer many other pH and ORP electrodes for specialty applications.

• Each 12 mm electrode includes a FREE electrode saver bottle to extend electrode life
• Use ORP electrodes with meters that read mV to take REDOX readings

WD-35635-20 Replacement Turbidity Calibration Solution Kit: 20, 100, 400, and 800 NTU Standards by Oakton

• Includes one each of 60-mL HPDE bottle of four NTU standards

WD-27003-04 Cole-Parmer® Self-cleaning pH Electrode, CPVC Housing, 1 k Ohms RTD by Oakton

• Flat surface prevents buildups, while fluid flow cleans surface for longer life
• Use with most meters and controllers - BNC connector and ATC element work with a variety of units
• Double junction for difficult applications

WD-35613-24 pH 6+ Meter Kit, 0 to 100°C Temperature Range, 0.00 to 14.00 pH Range, and ±1999 mV Range by Oakton

Reads pH, mV (for ORP/Redox measurements) and temperature

Achieve professional results at an economical price! The microprocessor-based pH 6+ meter gives you high accuracy and reliability. Use this meter to take pH, mV and temperature measurements. The millivolt readout lets you take ORP readings. Meter includes a protective rubber boot that also acts as a meter stand.

• Automatic Temperature Compensation (ATC)
• All push button operation
• Three-point pH calibration and mV offset calibration
• Auto buffer recognition
• Hold function; Auto-off
• Use with most pH and ORP electrodes with BNC connectors

WD-35419-31 PH 550 Replacement pH Electrode with Temperature Sensor by Oakton

Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.