Oakton

WD-35613-22 pH 6+ Meter with Probe, 0 to 100°C Temperature Range, 0.00 to 14.00 pH Range, and ±1999 mV Range by Oakton

Reads pH, mV (for ORP/Redox measurements) and temperature

Achieve professional results at an economical price! The microprocessor-based pH 6+ meter gives you high accuracy and reliability. Use this meter to take pH, mV and temperature measurements. The millivolt readout lets you take ORP readings. Meter includes a protective rubber boot that also acts as a meter stand.

• Automatic Temperature Compensation (ATC)
• All push button operation
• Three-point pH calibration and mV offset calibration
• Auto buffer recognition
• Hold function; Auto-off
• Use with most pH and ORP electrodes with BNC connectors

WD-35604-04 CON 6+ Handheld Conductivity Meter Kit, -10 to 110°C Temperature Range and 0 to 20.00, 0 to 200.0, 0 to 2000 µS by Oakton

Features five measuring ranges up to 200.0 mS

These meters feature easy, push-button operation, a convenient HOLD function, and Auto-off function that shuts meter off after 20 minutes of non-use.

Meters offer two modes of five-point calibration. For quick and easy calibrations, use automatic mode with preset calibration points at the most popular values. For more flexibility, calibrate in the manual mode and set your calibration point at any value.

Set-up functions let you customize automatic temperature compensation and cell constant. The protective rubber boot helps shield your meter from drops and dings, and features a built-in stand.

CON 6+ features automatic or manual ranging across five ranges for a wide variety of applications ranging from pure water to boiler blow down water.

• High accuracy in changing temperature conditions
• Temperature readout and automatic temperature compensation (ATC)
• Calibrate the CON 6 at one point and all five ranges are covered

WD-35604-00 CON 6+ Handheld Conductivity Meter with Probe, -10 to 110°C Temperature Range and 0 to 20.00, 0 to 200.0, 0 to 2000 µS Conductivity Range WD-35604-00 by Oakton

Features five measuring ranges up to 200.0 mS

These meters feature easy, push-button operation, a convenient HOLD function, and Auto-off function that shuts meter off after 20 minutes of non-use.

Meters offer two modes of five-point calibration. For quick and easy calibrations, use automatic mode with preset calibration points at the most popular values. For more flexibility, calibrate in the manual mode and set your calibration point at any value.

Set-up functions let you customize automatic temperature compensation and cell constant. The protective rubber boot helps shield your meter from drops and dings, and features a built-in stand.

CON 6+ features automatic or manual ranging across five ranges for a wide variety of applications ranging from pure water to boiler blow down water.

• High accuracy in changing temperature conditions
• Temperature readout and automatic temperature compensation (ATC)
• Calibrate the CON 6 at one point and all five ranges are covered

WD-35462-11 EcoTestr™ CTS Pocket Conductivity, Salinity, and TDS Meter by Oakton

Two Reasons Why Accurate Water Analysis Just Got Easier!

Measure water quality quick and easy without breaking the bank when you select one of these newly redesigned Oakton EcoTestrs. The pH2+ meter accurately measures pH and temperature simultaneously, while the CTS meter is now a reliable 3-in-1 tool that measures conductivity, TDS, and salinity.

• Larger display with a better viewing angle
• Expanded 4-digit dual-line display shows parameters and temperature readings simultaneously
• Automatic temperature compensation ensures accurate reading in varying environments
• Easy-to-navigate interface for quick setup and calibration
• Redesigned leakproof cap functions as a sample cup and as a stabilizing base to stand the meter upright
• Rugged IP67-rated housing is dustproof and waterproof and it floats
• Lanyard attachment makes field measurements more convenient
• Battery level indicator flashes when battery is low
• Batteries are included ready to go right out of the box!

WD-35607-90 CON 150 Portable Waterproof Conductivity Meter Kit by Oakton

The CON 150 meter offers a rugged, waterproof housing with built-in stand at an economical price. The large, three-line LCD lets you view the conductivity or TDS measurement simultaneously with temperature. Convenient auto-ranging and auto-cal functions for one calibration point per measurement range. Select a two-cell probe with a 0.1, 1.0, or 10 cell constant and automatic temperature compensation (ATC). ATC ensures measurement accuracy even in fluctuating temperatures. Select temperature readout from C/F to suit your application.

Meter features include ready (stability) indicator, smart averaging, hold function, calibration alarm (visible), battery life indicator, and probe status. Data storage allows manual storage and recall of 150 data sets, as well as the log of the last calibration data.

• Intuitive, user-friendly icons probe status displays cell constant
• Grip-Clip holder quickly and easily secures the probe to your beaker or container
• Expanded data logging for up to 150 data sets
• 700 hours battery life or optional universal power adapter
• Built-in stand and wall-mount option allow for easy laboratory measurement or storage

WD-35802-00 Ammonia NH3 Single-junction Ion-Selective Electrode (ISE) by Oakton

Double junction makes these electrodes ideal even for rugged applications

Use these economical Ion Selective Electrodes (ISEs) with the ION 510 meter, pH 2500 Ion benchtop meter, or the Ion Acorn meters. They also are suitable for use with any other ion meter, or with any meter with 0.1 mV resolution. All ISEs feature a BNC connector and 3-ft cable.

ISE solution kits contain the solutions and accessories needed for calibration, sample preparation and measurement of ion concentration and activity. All solutions are supplied with MSDS (Material Safety Data Sheet) and have a value of 1000 ppm.

• Each features a BNC connector and 3-ft cable

WD-35614-32 pH 150 Portable Waterproof pH Meter by Oakton

The pH 150 meter offers a rugged, waterproof housing with built-in stand at an economical price. The large, three-line LCD lets you simply view the pH or mV measurement simultaneously with temperature and calibration % slope. Auto buffer recognition identifies the correct pH buffer for rapid, reliable calibration.

Calibrate meter with up to six points from USA, NIST, and DIN pH buffer sets. Automatic temperature compensation (ATC) ensures measurement accuracy even in fluctuating temperatures. Select temperature readout from C/F to suit your application.

Meter features include ready (stability) indicator, smart averaging, hold function, calibration alarm (visible), battery life indicator, and electrode status. Data storage allows manual storage and recall of 150 data sets, as well as the log of the last calibration data.

• Intuitive, user-friendly icons--electrode status displays pH slope
• Grip-Clip holder quickly and easily secures the electrode to your beaker
• Expanded data logging for up to 150 data sets
• mV offset for calibration of ORP standards, zeroing mV, and pH diagnostics
• 700 hour battery-life, or optional AC power adapter
• Built-in stand and wall mount option allow for easy benchtop measurement

WD-35808-71 Single-junction, Epoxy-body, Gel-filled pH Electrode by Oakton

Built-in temperature sensor lets you take ATC readings with a single probe

All-in-One Waterproof electrodes feature a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

Each electrode is 12 mm dia with a 3 ft cable.

• Includes a FREE electrode saver bottle to extend electrode life
• Feature a BNC connector for pH and a waterproof 6-pin connector for temperature

WD-35419-23 Ion 700 Meter with "All-in-one" SJ Epoxy pH Electrode/ATC Probe and Stand, 110/220 VAC 50/60 Hz by Oakton

Large display allows you to see measurement values at a glance

Ion 700 meter measures pH, mV, relative mV, and temperature while adding ion measurement capabilities. Ion concentration is directly read in ppm for easy use. Verify electrode operation while taking measurements with the dual ppm and mV display. Up to three ion-concentration standards (choose from 0.1, 1.0, 10.0, 100.0, or 1000.0 ppm) may be calibrated.

The easy-to-use, microprocessor-based meter features HOLD, ATC, recorder output, and electrode diagnostics. Automatic temperature compensation (ATC) maintains reading accuracy even with fluctuating temperatures. Five-point pH calibration, with automatic buffer recognition for both USA (pH 1.68, 4.01, 7.00, 10.01, 12.45) and NIST (pH 1.68, 4.01, 6.86, 9.18, 12.45) pH buffers, makes for easy calibration no matter which requirement you need to meet. The convenient pull-out quick reference card keeps procedures handy at all times. The large, dual-display LCD provides excellent visibility even from a distance. Meter accepts pH, ORP, or ion-selective electrodes with BNC connectors.

• Custom 3-1/4" x 2-7/16" LCD display
• Small size conserves valuable benchspace
• Store and recall up to 100 data sets

WD-35643-05 DO 100 Portable DO Meter Kit with DO Probe and Case by Oakton

The new addition to the Environmental Express Oakton product line features updates to measuring water quality easier and faster. The larger display is 2.75 in. by 2.0 in. for better viewing angle, and has indicators for battery life, stability, and calibration. It shows both the parameter and temperature measurements at the same time.

The meter is a perfect combination of the most advanced electronics technology, sensor technology, and software design all while being the most cost-effective portable electrochemical meter. The microprocessor-based meter features automatic calibration, automatic temperature, salinity compensation, function set-up, self-diagnostics, automatic power-off, and low voltage display.

DO 100 portable meter comes with a polarographic electrode and a special DO calibration sleeve, taking only three to five minutes to polarize. The electrode also comes with three combined membrane caps so the membrane can be easily replaced.

• Digital filter improves measurement speed and accuracy
• Clear large-screen LCD with white backlight
• Stable reading and automatic lock-up modes available
• IP57 waterproof and dust-resistant rated – great for use under harsh environments
• Includes polarographic DO electrode with built-in temperature sensor

Includes

Meter includes three AA batteries

DO 100 portable meter, polarographic DO electrode, 30 mL DO inner solution, cathode polishing paper, DO electrode membrane cap, carrying case

WD-17106-20 InnoCal NIST-Traceable Calibration; pH Meter, Handheld/Benchtop by Oakton

Regulatory and quality agencies like FDA and EPA have strict guidelines for the determination and control of pH. Maintain your compliance with the help of InnoCal. We can calibrate new instrument purchases from Cole-Parmer, recalibrate your existing instruments, and provide maintenance and repair services.

InnoCal's metrologists can service most any brand of pH, conductivity, or dissolved oxygen meter including Oakton Instruments, accumet, Fisher Brand, Mettler-Toledo, YSI, WTW, Horiba, Hanna Instruments, Thermo Scientific Orion, VWR SympHony, and others.

Calibrations are performed on any handheld or benchtop pH meter with a BNC connection. The calibration contains five test points for pH (2, 4, 7, 10, 12) and five test points in millivolts across the range. If included, the automatic temperature compensation (ATC) probe will also be tested.

• Five electrical pH and mV test points

WD-35634-30 pHTestr 30 Portable Waterproof pH Tester by Oakton

Dual Display of pH and Temperature

High ±0.01 pH accuracy in a waterproof pocket-sized instrument! This unique Testr display pH and °C readings on a single large display. It also features a Double-junction electrode ideal for dirty water and solutions with heavy metals or other contaminants. Its waterproof, dustproof housing protects Testr from rugged field or plant environments.

• High ±0.01 pH accuracy
• Simultaneous pH and temperature (°C) display
• Suitable for most ASTM and EPA test procedures
• Double-junction electrode ideal for dirty water, heavy sulfides, tris buffers and organics
• Increased reference gel volume offers significantly longer electrode life
• Certifiable to IP67 standards waterproof and dustproof housing floats
• Replaceable sensor lets you reuse same meter body, saving you money
• Automatic temperature compensation
• Three point push-button calibration

WD-35635-00 T-100 Turbidity Meter with Kit by Oakton

Waterproof and dustproof with IP67 rated housing that floats!

Designed for portability and durability the waterproof T-100 turbidity meter is ideal for monitoring turbidity in chemical, food and industrial applications. The microprocessor-based T-100 turbidity meter uses an infrared LED light source and delivers unprecedented repeatability and accuracy while offering resolution as low as 0.01 NTU. This lightweight meter is a valuable analytical tool for field-testing and quality control.

Calibration standards are now provided in freeze-resistant 60-mL HDPE bottles for better shipping and longer shelf-life.

• Includes primary calibration standards (4), cuvettes w/ light shield caps (7), collection bottle, lint-free cloth, silicone oil, batteries, hard carrying case, and manual
• Four point push-button calibration for full-range accuracy
• Auto-ranging from 0 to 1000 NTU

WD-35613-25 pH 100 Portable pH meter with pH and Temperature Probes by Oakton

The new addition to the Environmental Express Oakton product line features updates to measuring water quality easier and faster. The larger display is 2.75 in. by 2.0 in. for better viewing angle, and has indicators for battery life, stability, and calibration. It also shows both the parameter and temperature measurements at the same time. The pH 100 meter measures pH, mV, ORP, and temperature.

The built-in microprocessor chip enables advanced functions, such as auto calibration, auto temperature compensation, parameter setting, self-diagnosis, auto power-off, and low-battery reminders. The meter uses advanced digital processing technology, intelligently improving the response time and accuracy of your measurements. Stable reading and auto lock display modes are available.

• Measured parameter and temperature shown on display at same time
• Utilizes same electrodes as Oakton 6+ series
• Stability, calibration, and low-battery indicators
• Waterproof and dust-resistant IP57 rating – great for use under harsh environments

INCLUDES

Meter includes three AA batteries.

pH 100 portable pH meter, plastic combination pH electrode, and temperature probe

WD-35634-35 PCTSTestr™ 50 Waterproof Pocket pH/Cond/TDS/Salinity Tester, Premium 50 Series by Oakton

New design stands up to the challenges of measuring water quality even stands upright

The Oakton pH pocket testers stand up to everyday use, harsh environments, and the test of time. The testers can even stand upright when the cap is used as the stabilizing base. When you select one of these pH testers, you get a pocketful of useful features and benefits.

• Double-junction pH electrode sensor is dependable, long lasting, and easy to maintain ideal for use with sulfides, heavy metals, organics, Tris buffer, or protein solids
• Easy-to-replace sensor module lets you use the tester body over and over again
• Intuitive interface has self-diagnostic error messages, and battery-life and stable reading indicators
• Simple operation at your fingertips with MENU button, 1-button calibration, and HOLD button to freeze readings for recording
• Valox® body resists most chemicals and is rugged, dustproof, waterproof, and IP67 rated
• Leakproof cap functions as a sample cup, sensor hydrating cup, and stabilizing base to stand the meter upright
• Uses common AAA batteries, and auto shutoff extends battery life

WD-35643-14 DO 6+ Dissolved Oxygen Meter Kit, 0.0 to 50.0°C Tempature Range and 0.0 to 50.0 ppt, 0 to 20 mg/L Dissolved Oxygen Range by Oakton

High accuracy combined with economical pricing

These meters provide a great value. The ranges work to test water quality in wastewater, surface water, ground water, or drinking water. A clear LCD display shows results in ppm or mg/L with enunciators to aid in use and troubleshooting. Six simple buttons allow for freezing readings, toggling between display units and temperature results, setup, calibration, and automatic barometric and salinity compensation after manual parameter inputs. Additional benefits of the simple design allow you to view electrode slope, zero offset, and millivolt values for electrode diagnostics.

• Includes galvanic DO probe, membrane caps, electrolyte solution, sample bottles, protective rubber boot/stand, batteries,and hard plastic carrying case
• Low-maintenance, Galvanic probe requires no warm-up time

WD-35634-14 pHTester 10 BNC Portable Waterproof pH Tester by Oakton

Use with any pH electrode with a BNC connector

Simply choose the electrode best suited for your application, connect the pHTestr BNC 10, calibrate, and measure. Change electrodes to suit your application without having to purchase another meter. Large display and tactile keypad allow for easy calibration along with USA and NIST auto-buffer recognition. Hold function freezes reading on the display for easy recording. Additional features include Valox® sensor housing, self-diagnostic error messages, a battery-life indicator, and an auto-off function to maximize battery life.

• Versatility of a handheld meter at a pocket price
• IP67-rated protects meter from water, dust, and shock while offering chemical resistance
• Meter floats accidental drops into water will not result in lost or damaged meters

WD-17002-06 InnoCal NIST-Traceable Calibration, Thermistor Thermometer System Meter+Probe by Oakton

Regardless of the type of thermometry probe your application requires, InnoCal can ensure the accuracy of your meter, probe, or system!

All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025 and MIL-STD-45662A. See the sample certificate under the "More Info" section to see how InnoCal's certificates provide more information in a concise manner than the rest of the industry.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory which is technically proficient and committed to quality and customer-focused continuous improvement. Our scope of A2LA accreditation can be found under the "More Info" section.

Calibrations on temperature systems (meter and probe) are performed using direct comparison in high-stability liquid using high-precision and SPRT's and displays. Measurements can be performed at four points between -196 and 1300°C. Points are generally selected at standard ITS-90 points across the range of the probe but customer-specified points can be accommodated. Calibrating the probe and meter together produces the highest accuracies.

• NIST-traceable calibration allows you to confirm that the specific asset you purchase does in fact meet the manufacturer's published specification EPA, USDA, ISO and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications
• Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays
• For Thermistors only
• Calibration report is for both the meter and probe
• Calibration of the meter and probe is preferred over calibrating the meter and probe separately