Demand Flow Regulator

1450-401R DS400 Docking Station Includes Demand Flow Regulator by GfG

Easy operation

The operation of the DS400 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS400 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS400 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS400 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS400 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS400 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS400 is the right choice.

The DS400 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS400 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS400 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS400 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

The DS400 software includes a module to quickly print official calibration or bump test certificates. Simply download the records from the DS400 and start the "Certificate Generator" it takes only seconds!

Features

• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Cascade multiple docking stations
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

1450-402R DS400 Docking Station - Instrument & Pump Includes Demand Flow Regulator by GfG

Easy operation

The operation of the DS400 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS400 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS400 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS400 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS400 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS400 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS400 is the right choice.

The DS400 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS400 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS400 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS400 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

The DS400 software includes a module to quickly print official calibration or bump test certificates. Simply download the records from the DS400 and start the "Certificate Generator" it takes only seconds!

Features

• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Cascade multiple docking stations
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

*Please note we can only ship RKI products to customers within the United States

81-DC2000-02 Data Cal 2000 Docking Station Includes Station, Power Cord, Serial Cable, PC Software CD, and Demand Flow Regulator by RKI Instruments

The RKI Data Cal 2000 Docking and Calibration Station is a comprehensive instrument management system which provides charging, downloading, calibration, bump testing, and configuration for our Model GX-2009, GX-2003 and GX-2001 gas detection instruments. The system has configuration capabilities for alarm setting, datalog and calibration interval, user and location ID, and many other instrument parameters. Factory and user default settings are available for upload to instruments. The Data Cal 2000 is supplied with PC software, power and serial cords, and operating instructions. The Data Cal 2000 power requirements are 115VAC, 50/60Hz. PC or laptop to be supplied by customer.

Features:

• Automated instrument management for the GX-2001, GX-2003, and GX-2009
• Simultaneously service up to 10 instruments
• Calibrations, bump tests, and data downloads automatically performed and archived
• Manage instruments and archive records by serial #, user ID, or station ID
• Services are automatic, on-demand, or custom intervals
• Each docking module equipped with built-in flow control and status indicators
• Approaching and past due service prompts
• Alkaline recognition
• Single exhaust line for all instruments
• 5 inlet ports for separate gas mixtures
• Automatic quick charge in 90 minutes or less
• Create and save a list of common gas mixtures
• Automatic tracking of cylinder expiration
• Save factory and user default configurations for uploading to instruments
• Password protect configuration controls
• Records are easily exportable as CSV data
• Software is Windows 98, NT, 2000, and XP compatible
• Operates on any Pentium II or higher PC

*Please note we can only ship RKI products to customers within the United States

81-SDME2-02 SDM-E2 Stand Alone Calibration Station for Eagle 2, with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, & Demand Flow Regulator by RKI Instruments

Stand Alone Calibration Station

Multi Module System

Stand Alone Station Features

• Stand-alone station (no connection to PC Required)
• Charging (NiMH batteries)
• Calibration
• Bump Test
• Save bump test and calibration records
• Bump test and calibration records copy to USB jump drive
• 2 Calibration gas ports
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure Eagle 2 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDM3R202 SDM-3R Calibration Station with 2 Solenoids, Demand Flow Regulators (2 each), AC Adapter, Flash Drive, USB Cable, and Tubing by RKI Instruments

Stand Alone Use

The SDM-3R is a versatile maintenance tool that automates the service of a GX-3R (Pro) portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing, with all records stored automatically for future upload to a PC via USB flash drive (PC software and flash drive included).

PC-Controlled Use

Automate how you manage and service GX-3R (Pro) instruments by connecting the SDM-3R to a computer with a USB cable. With the SDM Docking Station controller software, you can simultaneously calibrate, bump test, alarm check, archive data, or charge up to ten instruments. You can also download the datalogging history from each instrument into one easy to manage location. SDM-3R stations can be manifolded together to reduce the number of demand flow regulators gas cylinders required.

Features of Stand Alone Use (no PC required)

• Compatible with both GX-3R and GX-3R Pro
• Automatically charge, bump test, and/or calibrate
• Auto on/off of gas detector
• 3 separate gas inputs
• Multiple modules (10 max) can use one set of calibration equipment
• Save Bump Test, Calibration, and Alarm Check records to USB flash drive, computer, or network
• Includes PC software for viewing/archiving bump test, calibration records, and event data

Features of PC-Controlled Use

• Multiple modules connected to a PC (10 max)
• Automatic calibration/bump test option
• Configure GX-3R (Pro) parameters
• Archive Bump Test, Calibration, and Alarm Check
• Archive data to network location
• Software controlled data retrieval
• Windows 7, 8, and 10 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDM3R302 SDM-3R Calibration Station with 3 Solenoids, Demand Flow Regulators (3 each), AC Adapter, Flash Drive, USB Cable, and Tubing by RKI Instruments

Stand Alone Use

The SDM-3R is a versatile maintenance tool that automates the service of a GX-3R (Pro) portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing, with all records stored automatically for future upload to a PC via USB flash drive (PC software and flash drive included).

PC-Controlled Use

Automate how you manage and service GX-3R (Pro) instruments by connecting the SDM-3R to a computer with a USB cable. With the SDM Docking Station controller software, you can simultaneously calibrate, bump test, alarm check, archive data, or charge up to ten instruments. You can also download the datalogging history from each instrument into one easy to manage location. SDM-3R stations can be manifolded together to reduce the number of demand flow regulators gas cylinders required.

Features of Stand Alone Use (no PC required)

• Compatible with both GX-3R and GX-3R Pro
• Automatically charge, bump test, and/or calibrate
• Auto on/off of gas detector
• 3 separate gas inputs
• Multiple modules (10 max) can use one set of calibration equipment
• Save Bump Test, Calibration, and Alarm Check records to USB flash drive, computer, or network
• Includes PC software for viewing/archiving bump test, calibration records, and event data

Features of PC-Controlled Use

• Multiple modules connected to a PC (10 max)
• Automatic calibration/bump test option
• Configure GX-3R (Pro) parameters
• Archive Bump Test, Calibration, and Alarm Check
• Archive data to network location
• Software controlled data retrieval
• Windows 7, 8, and 10 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDM3R109 SDM-3R Calibration Station with 1 Solenoid, Demand Flow Regulator, 116AL cyl H2S/CO/CH4/O2, Cylinder Holder, AC Adapter, Flash Drive, USB Cable, and Tubing by RKI Instruments

Stand Alone Use

The SDM-3R is a versatile maintenance tool that automates the service of a GX-3R (Pro) portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing, with all records stored automatically for future upload to a PC via USB flash drive (PC software and flash drive included).

PC-Controlled Use

Automate how you manage and service GX-3R (Pro) instruments by connecting the SDM-3R to a computer with a USB cable. With the SDM Docking Station controller software, you can simultaneously calibrate, bump test, alarm check, archive data, or charge up to ten instruments. You can also download the datalogging history from each instrument into one easy to manage location. SDM-3R stations can be manifolded together to reduce the number of demand flow regulators gas cylinders required.

Features of Stand Alone Use (no PC required)

• Compatible with both GX-3R and GX-3R Pro
• Automatically charge, bump test, and/or calibrate
• Auto on/off of gas detector
• 3 separate gas inputs
• Multiple modules (10 max) can use one set of calibration equipment
• Save Bump Test, Calibration, and Alarm Check records to USB flash drive, computer, or network
• Includes PC software for viewing/archiving bump test, calibration records, and event data

Features of PC-Controlled Use

• Multiple modules connected to a PC (10 max)
• Automatic calibration/bump test option
• Configure GX-3R (Pro) parameters
• Archive Bump Test, Calibration, and Alarm Check
• Archive data to network location
• Software controlled data retrieval
• Windows 7, 8, and 10 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDM3R203 SDM-3R Calibration Station with 2 Solenoids, Demand Flow Regulator, 58AL Cylinder H2S/CO/CH4/O2, Cylinder Holder, AC Adapter, Flash Drive, USB Cable, and Tubing by RKI Instruments

Stand Alone Use

The SDM-3R is a versatile maintenance tool that automates the service of a GX-3R (Pro) portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing, with all records stored automatically for future upload to a PC via USB flash drive (PC software and flash drive included).

PC-Controlled Use

Automate how you manage and service GX-3R (Pro) instruments by connecting the SDM-3R to a computer with a USB cable. With the SDM Docking Station controller software, you can simultaneously calibrate, bump test, alarm check, archive data, or charge up to ten instruments. You can also download the datalogging history from each instrument into one easy to manage location. SDM-3R stations can be manifolded together to reduce the number of demand flow regulators gas cylinders required.

Features of Stand Alone Use (no PC required)

• Compatible with both GX-3R and GX-3R Pro
• Automatically charge, bump test, and/or calibrate
• Auto on/off of gas detector
• 3 separate gas inputs
• Multiple modules (10 max) can use one set of calibration equipment
• Save Bump Test, Calibration, and Alarm Check records to USB flash drive, computer, or network
• Includes PC software for viewing/archiving bump test, calibration records, and event data

Features of PC-Controlled Use

• Multiple modules connected to a PC (10 max)
• Automatic calibration/bump test option
• Configure GX-3R (Pro) parameters
• Archive Bump Test, Calibration, and Alarm Check
• Archive data to network location
• Software controlled data retrieval
• Windows 7, 8, and 10 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDM3R204 SDM-3R Calibration Station with 2 Solenoids, Demand Flow Regulator, 34AL Cylinder H2S/CO/CH4/O2, Cylinder Holder, AC Adapter, Flash Drive, USB Cable, and Tubing by RKI Instruments

Stand Alone Use

The SDM-3R is a versatile maintenance tool that automates the service of a GX-3R (Pro) portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing, with all records stored automatically for future upload to a PC via USB flash drive (PC software and flash drive included).

PC-Controlled Use

Automate how you manage and service GX-3R (Pro) instruments by connecting the SDM-3R to a computer with a USB cable. With the SDM Docking Station controller software, you can simultaneously calibrate, bump test, alarm check, archive data, or charge up to ten instruments. You can also download the datalogging history from each instrument into one easy to manage location. SDM-3R stations can be manifolded together to reduce the number of demand flow regulators gas cylinders required.

Features of Stand Alone Use (no PC required)

• Compatible with both GX-3R and GX-3R Pro
• Automatically charge, bump test, and/or calibrate
• Auto on/off of gas detector
• 3 separate gas inputs
• Multiple modules (10 max) can use one set of calibration equipment
• Save Bump Test, Calibration, and Alarm Check records to USB flash drive, computer, or network
• Includes PC software for viewing/archiving bump test, calibration records, and event data

Features of PC-Controlled Use

• Multiple modules connected to a PC (10 max)
• Automatic calibration/bump test option
• Configure GX-3R (Pro) parameters
• Archive Bump Test, Calibration, and Alarm Check
• Archive data to network location
• Software controlled data retrieval
• Windows 7, 8, and 10 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDM3R303 SDM-3R Calibration Station with 3 Solenoids, Demand Flow Regulator, 58AL Cylinder H2S/CO/CH4/O2, Cylinder Holder, AC Adapter, Flash Drive, USB Cable, and Tubing by RKI Instruments

Stand Alone Use

The SDM-3R is a versatile maintenance tool that automates the service of a GX-3R (Pro) portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing, with all records stored automatically for future upload to a PC via USB flash drive (PC software and flash drive included).

PC-Controlled Use

Automate how you manage and service GX-3R (Pro) instruments by connecting the SDM-3R to a computer with a USB cable. With the SDM Docking Station controller software, you can simultaneously calibrate, bump test, alarm check, archive data, or charge up to ten instruments. You can also download the datalogging history from each instrument into one easy to manage location. SDM-3R stations can be manifolded together to reduce the number of demand flow regulators gas cylinders required.

Features of Stand Alone Use (no PC required)

• Compatible with both GX-3R and GX-3R Pro
• Automatically charge, bump test, and/or calibrate
• Auto on/off of gas detector
• 3 separate gas inputs
• Multiple modules (10 max) can use one set of calibration equipment
• Save Bump Test, Calibration, and Alarm Check records to USB flash drive, computer, or network
• Includes PC software for viewing/archiving bump test, calibration records, and event data

Features of PC-Controlled Use

• Multiple modules connected to a PC (10 max)
• Automatic calibration/bump test option
• Configure GX-3R (Pro) parameters
• Archive Bump Test, Calibration, and Alarm Check
• Archive data to network location
• Software controlled data retrieval
• Windows 7, 8, and 10 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDM3R304 SDM-3R Calibration Station with 3 Solenoids, Demand Flow Regulator, 34AL Cylinder H2S/CO/CH4/O2, Cylinder Holder, AC Adapter, Flash Drive, USB Cable, and Tubing by RKI Instruments

Stand Alone Use

The SDM-3R is a versatile maintenance tool that automates the service of a GX-3R (Pro) portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing, with all records stored automatically for future upload to a PC via USB flash drive (PC software and flash drive included).

PC-Controlled Use

Automate how you manage and service GX-3R (Pro) instruments by connecting the SDM-3R to a computer with a USB cable. With the SDM Docking Station controller software, you can simultaneously calibrate, bump test, alarm check, archive data, or charge up to ten instruments. You can also download the datalogging history from each instrument into one easy to manage location. SDM-3R stations can be manifolded together to reduce the number of demand flow regulators gas cylinders required.

Features of Stand Alone Use (no PC required)

• Compatible with both GX-3R and GX-3R Pro
• Automatically charge, bump test, and/or calibrate
• Auto on/off of gas detector
• 3 separate gas inputs
• Multiple modules (10 max) can use one set of calibration equipment
• Save Bump Test, Calibration, and Alarm Check records to USB flash drive, computer, or network
• Includes PC software for viewing/archiving bump test, calibration records, and event data

Features of PC-Controlled Use

• Multiple modules connected to a PC (10 max)
• Automatic calibration/bump test option
• Configure GX-3R (Pro) parameters
• Archive Bump Test, Calibration, and Alarm Check
• Archive data to network location
• Software controlled data retrieval
• Windows 7, 8, and 10 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDME2-03 SDM-E2 Stand Alone Calibration Station for Eagle 2, with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, Demand Flow Regulator & 58AL Cyl 25 ppm H2S/50 ppm CO/50% LEL CH4/12% O2 in N2 by RKI Instruments

Stand Alone Calibration Station

Multi Module System

Stand Alone Station Features

• Stand-alone station (no connection to PC Required)
• Charging (NiMH batteries)
• Calibration
• Bump Test
• Save bump test and calibration records
• Bump test and calibration records copy to USB jump drive
• 2 Calibration gas ports
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure Eagle 2 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDME2-09-P2 DM-E2 Stand Alone Calibration Station for Eagle 2, with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, Demand Flow Regulator, 58AL Cyl 25 ppm H2S/50 ppm CO/50% LEL CH4/100 ppm isoButylene/12% O2 in N2 by RKI Instruments

Stand Alone Calibration Station

Multi Module System

Stand Alone Station Features

• Stand-alone station (no connection to PC Required)
• Charging (NiMH batteries)
• Calibration
• Bump Test
• Save bump test and calibration records
• Bump test and calibration records copy to USB jump drive
• 2 Calibration gas ports
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure Eagle 2 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDM6000-03 SDM-6000 Calibration Station for GX-6000, includes Particle Filter, Connection Brackets, Exhaust Tubing, USB Cable for PC, SD Card, USB SD Card Reader, Ethernet Cable, Single Unit AC Adapter, Demand Flow Regulator, and Calibration Gas Tubing by RKI Instruments

Stand Alone Station

Modular Design

Up to 10 calibration stations can also be connected to one PC for automated charging, calibration, bump testing and archiving of data. Even if instruments are turned off, automated routines will power up the instruments and run as scheduled. All data collected from the PC Controlled software can also be centralized in one network location accessible by anyone with the PC Controlled software with access to the network location.

Stand Alone Station Features

• Stand-alone station (no PC Required)
• Charge, calibrate, bump test, and alarm test
• Included software collects calibration, bump test, alarm history, and exposure date from instruments
• Automatically power instruments on / off for scheduled calibration
• Accepts GX-6000 with or without rubber boot

Modular Design

• Simultaneously bump / calibrate, charge, and collect data up to 10 instruments
• No tubing, adaptors or wires needed to connect
• One power source for all stations
• Configure GX-6000 parameters
• Centralize instrument data from multiple stations and locations to one network location
• Ethernet port for LAN connectivity
• Schedule automatic calibration / bump test
• Optional valve expansion module for up to six gas cylinders
• Optional battery operated printer

*Please note we can only ship RKI products to customers within the United States

81-SDM2012-05 SDM-2012 Single Point Calibration Station for GX-2012 with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, Two Demand Flow Regulators, 58AL Cylinder H2S (25 ppm)/CO/CH4/O2 & 58L Steel Cylinder Methane 100% Volume by RKI Instruments

RKI's new SDM-2012 calibration station for the GX-2012 is now available with advanced features for charging, calibration, & bump testing. Once you power up the GX-2012 inside the SDM-2012 calibration module, the GX-2012's display will indicate whether it's transmitting data, bump testing, calibrating, as well as the results of the bump test or calibration.

Stand Alone Station

Multi Module System

Stand Alone Station Features

• Stand-alone station (no PC Required)
• Charging (Li-Ion Battery Pack)
• Calibration
• Bump Test
• Save Bump Test and Calibration records
• Bump test and calibration records copy to USB jump drive
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure GX-2012 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDM6000-04 SDM-6000 Calibration Station for GX-6000, includes Particle Filter, Connection Brackets, Exhaust Tubing, USB Cable for PC, SD Card, USB SD Card Reader, Ethernet Cable, Single Unit AC Adapter, Demand Flow Regulator, Calibration Gas Tubing, 58AL Cylinder H2S / CO / CH4 / O2, and Cylinder Holder by RKI Instruments

Stand Alone Station

Modular Design

Up to 10 calibration stations can also be connected to one PC for automated charging, calibration, bump testing and archiving of data. Even if instruments are turned off, automated routines will power up the instruments and run as scheduled. All data collected from the PC Controlled software can also be centralized in one network location accessible by anyone with the PC Controlled software with access to the network location.

Stand Alone Station Features

• Stand-alone station (no PC Required)
• Charge, calibrate, bump test, and alarm test
• Included software collects calibration, bump test, alarm history, and exposure date from instruments
• Automatically power instruments on / off for scheduled calibration
• Accepts GX-6000 with or without rubber boot

Modular Design

• Simultaneously bump / calibrate, charge, and collect data up to 10 instruments
• No tubing, adaptors or wires needed to connect
• One power source for all stations
• Configure GX-6000 parameters
• Centralize instrument data from multiple stations and locations to one network location
• Ethernet port for LAN connectivity
• Schedule automatic calibration / bump test
• Optional valve expansion module for up to six gas cylinders
• Optional battery operated printer

*Please note we can only ship RKI products to customers within the United States

81-SDM6000-05 SDM-6000 Calibration Station for GX-6000, includes Particle Filter, Connection Brackets, Exhaust Tubing, USB Cable for PC, SD Card, USB SD Card Reader, Ethernet Cable, Single Unit AC Adapter, Demand Flow Regulator, Calibration Gas Tubing, 58AL Cylinder Isobutylene / H2S / CO / CH4 / O2, and Cylinder Holder by RKI Instruments

Stand Alone Station

Modular Design

Up to 10 calibration stations can also be connected to one PC for automated charging, calibration, bump testing and archiving of data. Even if instruments are turned off, automated routines will power up the instruments and run as scheduled. All data collected from the PC Controlled software can also be centralized in one network location accessible by anyone with the PC Controlled software with access to the network location.

Stand Alone Station Features

• Stand-alone station (no PC Required)
• Charge, calibrate, bump test, and alarm test
• Included software collects calibration, bump test, alarm history, and exposure date from instruments
• Automatically power instruments on / off for scheduled calibration
• Accepts GX-6000 with or without rubber boot

Modular Design

• Simultaneously bump / calibrate, charge, and collect data up to 10 instruments
• No tubing, adaptors or wires needed to connect
• One power source for all stations
• Configure GX-6000 parameters
• Centralize instrument data from multiple stations and locations to one network location
• Ethernet port for LAN connectivity
• Schedule automatic calibration / bump test
• Optional valve expansion module for up to six gas cylinders
• Optional battery operated printer

*Please note we can only ship RKI products to customers within the United States

81-SDM6000-06 SDM-6000 Calibration Station for GX-6000, includes Particle Filter, Connection Brackets, Exhaust Tubing, USB Cable for PC, SD Card, USB SD Card Reader, Ethernet Cable, Single Unit AC Adapter, Demand Flow Regulator, Calibration Gas Tubing, 34AL Cylinder Isobutylene / Air, and Cylinder Holder by RKI Instruments

Stand Alone Station

Modular Design

Up to 10 calibration stations can also be connected to one PC for automated charging, calibration, bump testing and archiving of data. Even if instruments are turned off, automated routines will power up the instruments and run as scheduled. All data collected from the PC Controlled software can also be centralized in one network location accessible by anyone with the PC Controlled software with access to the network location.

Stand Alone Station Features

• Stand-alone station (no PC Required)
• Charge, calibrate, bump test, and alarm test
• Included software collects calibration, bump test, alarm history, and exposure date from instruments
• Automatically power instruments on / off for scheduled calibration
• Accepts GX-6000 with or without rubber boot

Modular Design

• Simultaneously bump / calibrate, charge, and collect data up to 10 instruments
• No tubing, adaptors or wires needed to connect
• One power source for all stations
• Configure GX-6000 parameters
• Centralize instrument data from multiple stations and locations to one network location
• Ethernet port for LAN connectivity
• Schedule automatic calibration / bump test
• Optional valve expansion module for up to six gas cylinders
• Optional battery operated printer

*Please note we can only ship RKI products to customers within the United States

81-SDM6000-07 SDM-6000 Calibration Station for GX-6000, includes Particle Filter, Connection Brackets, Exhaust Tubing, USB Cable for PC, SD Card, USB SD Card Reader, Ethernet Cable, Single Unit AC Adapter, Demand Flow Regulator, Calibration Gas Tubing, 34AL Cylinder H2S / CO / CH4 / O2, and Cylinder Holder by RKI Instruments

Stand Alone Station

Modular Design

Up to 10 calibration stations can also be connected to one PC for automated charging, calibration, bump testing and archiving of data. Even if instruments are turned off, automated routines will power up the instruments and run as scheduled. All data collected from the PC Controlled software can also be centralized in one network location accessible by anyone with the PC Controlled software with access to the network location.

Stand Alone Station Features

• Stand-alone station (no PC Required)
• Charge, calibrate, bump test, and alarm test
• Included software collects calibration, bump test, alarm history, and exposure date from instruments
• Automatically power instruments on / off for scheduled calibration
• Accepts GX-6000 with or without rubber boot

Modular Design

• Simultaneously bump / calibrate, charge, and collect data up to 10 instruments
• No tubing, adaptors or wires needed to connect
• One power source for all stations
• Configure GX-6000 parameters
• Centralize instrument data from multiple stations and locations to one network location
• Ethernet port for LAN connectivity
• Schedule automatic calibration / bump test
• Optional valve expansion module for up to six gas cylinders
• Optional battery operated printer

*Please note we can only ship RKI products to customers within the United States

81-SDME2-08-P1 SDM-E2 Stand Alone Calibration Station for Eagle 2, with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, Two Demand Flow Regulators, 58AL Cyl 25 ppm H2S/50 ppm CO/50% LEL CH4/12% O2 in N2, & 103L cyl 10 ppm Isobutylene in Air by RKI Instruments

Stand Alone Calibration Station

Multi Module System

Stand Alone Station Features

• Stand-alone station (no connection to PC Required)
• Charging (NiMH batteries)
• Calibration
• Bump Test
• Save bump test and calibration records
• Bump test and calibration records copy to USB jump drive
• 2 Calibration gas ports
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure Eagle 2 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDME2-08-P2 SDM-E2 Stand Alone Calibration Station for Eagle 2, with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, Two Demand Flow Regulators, 58AL Cyl 25 ppm H2S/50 ppm CO/50% LEL CH4/12% O2 in N2, & 103L cyl 100 ppm Isobutylene in Air by RKI Instruments

Stand Alone Calibration Station

Multi Module System

Stand Alone Station Features

• Stand-alone station (no connection to PC Required)
• Charging (NiMH batteries)
• Calibration
• Bump Test
• Save bump test and calibration records
• Bump test and calibration records copy to USB jump drive
• 2 Calibration gas ports
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure Eagle 2 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDM6000-08 SDM-6000 Calibration Station for GX-6000, includes Particle Filter, Connection Brackets, Exhaust Tubing, USB Cable for PC, SD Card, USB SD Card Reader, Ethernet Cable, Single Unit AC Adapter, 2 Demand Flow Regulators, Calibration Gas Tubing, 34AL Cylinder H2S / CO / CH4 / O2, 34AL HCN / N2, and 2 Cylinder Holders by RKI Instruments

Stand Alone Station

Modular Design

Up to 10 calibration stations can also be connected to one PC for automated charging, calibration, bump testing and archiving of data. Even if instruments are turned off, automated routines will power up the instruments and run as scheduled. All data collected from the PC Controlled software can also be centralized in one network location accessible by anyone with the PC Controlled software with access to the network location.

Stand Alone Station Features

• Stand-alone station (no PC Required)
• Charge, calibrate, bump test, and alarm test
• Included software collects calibration, bump test, alarm history, and exposure date from instruments
• Automatically power instruments on / off for scheduled calibration
• Accepts GX-6000 with or without rubber boot

Modular Design

• Simultaneously bump / calibrate, charge, and collect data up to 10 instruments
• No tubing, adaptors or wires needed to connect
• One power source for all stations
• Configure GX-6000 parameters
• Centralize instrument data from multiple stations and locations to one network location
• Ethernet port for LAN connectivity
• Schedule automatic calibration / bump test
• Optional valve expansion module for up to six gas cylinders
• Optional battery operated printer

*Please note we can only ship RKI products to customers within the United States