Demand Flow Regulator

Data Cal 2000 Docking Station, includes Station, Power Cord, Serial Cable, PC Software CD, 58L Cylinder H2S/CO/LEL/O2, and Demand Flow Regulator

*Please note we can only ship RKI products to customers within the United States

81-DC2000-02 Data Cal 2000 Docking Station Includes Station, Power Cord, Serial Cable, PC Software CD, and Demand Flow Regulator by RKI Instruments

The RKI Data Cal 2000 Docking and Calibration Station is a comprehensive instrument management system which provides charging, downloading, calibration, bump testing, and configuration for our Model GX-2009, GX-2003 and GX-2001 gas detection instruments. The system has configuration capabilities for alarm setting, datalog and calibration interval, user and location ID, and many other instrument parameters. Factory and user default settings are available for upload to instruments. The Data Cal 2000 is supplied with PC software, power and serial cords, and operating instructions. The Data Cal 2000 power requirements are 115VAC, 50/60Hz. PC or laptop to be supplied by customer.

Features:

• Automated instrument management for the GX-2001, GX-2003, and GX-2009
• Simultaneously service up to 10 instruments
• Calibrations, bump tests, and data downloads automatically performed and archived
• Manage instruments and archive records by serial #, user ID, or station ID
• Services are automatic, on-demand, or custom intervals
• Each docking module equipped with built-in flow control and status indicators
• Approaching and past due service prompts
• Alkaline recognition
• Single exhaust line for all instruments
• 5 inlet ports for separate gas mixtures
• Automatic quick charge in 90 minutes or less
• Create and save a list of common gas mixtures
• Automatic tracking of cylinder expiration
• Save factory and user default configurations for uploading to instruments
• Password protect configuration controls
• Records are easily exportable as CSV data
• Software is Windows 98, NT, 2000, and XP compatible
• Operates on any Pentium II or higher PC

*Please note we can only ship RKI products to customers within the United States

81-SDME2-02 SDM-E2 Stand Alone Calibration Station for Eagle 2, with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, & Demand Flow Regulator by RKI Instruments

Stand Alone Calibration Station

The SDM-E2 is a versatile maintenance tool for the Eagle 2 portable gas monitor. This docking station can be used as a stand-alone device for charging, calibration and bump testing, with all records automatically stored for future upload to a PC via USB flash drive (PC software and flash drive included).

Multi Module System

The SDM-E2 can also be connected to a PC for automated calibration bump testing and archiving of datalog data from Eagle 2 instruments. Up to ten SDM-E2 docking stations can be connected simultaneously using USB cables. The SDM-E2 is also equipped with two gas ports to connect up to two calibration gas mixtures to the multi module system.

Stand Alone Station Features

• Stand-alone station (no connection to PC Required)
• Charging (NiMH batteries)
• Calibration
• Bump Test
• Save bump test and calibration records
• Bump test and calibration records copy to USB jump drive
• 2 Calibration gas ports
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure Eagle 2 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDME2-03 SDM-E2 Stand Alone Calibration Station for Eagle 2, with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, Demand Flow Regulator & 58AL Cyl 25 ppm H2S/50 ppm CO/50% LEL CH4/12% O2 in N2 by RKI Instruments

Stand Alone Calibration Station

The SDM-E2 is a versatile maintenance tool for the Eagle 2 portable gas monitor. This docking station can be used as a stand-alone device for charging, calibration and bump testing, with all records automatically stored for future upload to a PC via USB flash drive (PC software and flash drive included).

Multi Module System

The SDM-E2 can also be connected to a PC for automated calibration bump testing and archiving of datalog data from Eagle 2 instruments. Up to ten SDM-E2 docking stations can be connected simultaneously using USB cables. The SDM-E2 is also equipped with two gas ports to connect up to two calibration gas mixtures to the multi module system.

Stand Alone Station Features

• Stand-alone station (no connection to PC Required)
• Charging (NiMH batteries)
• Calibration
• Bump Test
• Save bump test and calibration records
• Bump test and calibration records copy to USB jump drive
• 2 Calibration gas ports
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure Eagle 2 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDME2-09-P2 DM-E2 Stand Alone Calibration Station for Eagle 2, with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, Demand Flow Regulator, 58AL Cyl 25 ppm H2S/50 ppm CO/50% LEL CH4/100 ppm isoButylene/12% O2 in N2 by RKI Instruments

Stand Alone Calibration Station

The SDM-E2 is a versatile maintenance tool for the Eagle 2 portable gas monitor. This docking station can be used as a stand-alone device for charging, calibration and bump testing, with all records automatically stored for future upload to a PC via USB flash drive (PC software and flash drive included).

Multi Module System

The SDM-E2 can also be connected to a PC for automated calibration bump testing and archiving of datalog data from Eagle 2 instruments. Up to ten SDM-E2 docking stations can be connected simultaneously using USB cables. The SDM-E2 is also equipped with two gas ports to connect up to two calibration gas mixtures to the multi module system.

Stand Alone Station Features

• Stand-alone station (no connection to PC Required)
• Charging (NiMH batteries)
• Calibration
• Bump Test
• Save bump test and calibration records
• Bump test and calibration records copy to USB jump drive
• 2 Calibration gas ports
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure Eagle 2 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDM2012-05 SDM-2012 Single Point Calibration Station for GX-2012 with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, Two Demand Flow Regulators, 58AL Cylinder H2S (25 ppm)/CO/CH4/O2 & 58L Steel Cylinder Methane 100% Volume by RKI Instruments

RKI's new SDM-2012 calibration station for the GX-2012 is now available with advanced features for charging, calibration, & bump testing. Once you power up the GX-2012 inside the SDM-2012 calibration module, the GX-2012's display will indicate whether it's transmitting data, bump testing, calibrating, as well as the results of the bump test or calibration.

Stand Alone Station

The SDM-2012 is a versatile maintenance tool that automates the service of a GX-2012 portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing, with all records stored automatically for future upload to a PC via USB flash drive (PC software and flash drive included).

Multi Module System

The SDM-2012 can also be connected to a PC for automated calibration bump testing and archiving of datalog data from GX-2012 instruments. Up to ten SDM-2012 can be connected simultaneously using USB cables and the SDM-2012 includes connections for one or two calibration gas cylinders.

Stand Alone Station Features

• Stand-alone station (no PC Required)
• Charging (Li-Ion Battery Pack)
• Calibration
• Bump Test
• Save Bump Test and Calibration records
• Bump test and calibration records copy to USB jump drive
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure GX-2012 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDME2-08-P1 SDM-E2 Stand Alone Calibration Station for Eagle 2, with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, Two Demand Flow Regulators, 58AL Cyl 25 ppm H2S/50 ppm CO/50% LEL CH4/12% O2 in N2, & 103L cyl 10 ppm Isobutylene in Air by RKI Instruments

Stand Alone Calibration Station

The SDM-E2 is a versatile maintenance tool for the Eagle 2 portable gas monitor. This docking station can be used as a stand-alone device for charging, calibration and bump testing, with all records automatically stored for future upload to a PC via USB flash drive (PC software and flash drive included).

Multi Module System

The SDM-E2 can also be connected to a PC for automated calibration bump testing and archiving of datalog data from Eagle 2 instruments. Up to ten SDM-E2 docking stations can be connected simultaneously using USB cables. The SDM-E2 is also equipped with two gas ports to connect up to two calibration gas mixtures to the multi module system.

Stand Alone Station Features

• Stand-alone station (no connection to PC Required)
• Charging (NiMH batteries)
• Calibration
• Bump Test
• Save bump test and calibration records
• Bump test and calibration records copy to USB jump drive
• 2 Calibration gas ports
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure Eagle 2 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDME2-08-P2 SDM-E2 Stand Alone Calibration Station for Eagle 2, with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, Two Demand Flow Regulators, 58AL Cyl 25 ppm H2S/50 ppm CO/50% LEL CH4/12% O2 in N2, & 103L cyl 100 ppm Isobutylene in Air by RKI Instruments

Stand Alone Calibration Station

The SDM-E2 is a versatile maintenance tool for the Eagle 2 portable gas monitor. This docking station can be used as a stand-alone device for charging, calibration and bump testing, with all records automatically stored for future upload to a PC via USB flash drive (PC software and flash drive included).

Multi Module System

The SDM-E2 can also be connected to a PC for automated calibration bump testing and archiving of datalog data from Eagle 2 instruments. Up to ten SDM-E2 docking stations can be connected simultaneously using USB cables. The SDM-E2 is also equipped with two gas ports to connect up to two calibration gas mixtures to the multi module system.

Stand Alone Station Features

• Stand-alone station (no connection to PC Required)
• Charging (NiMH batteries)
• Calibration
• Bump Test
• Save bump test and calibration records
• Bump test and calibration records copy to USB jump drive
• 2 Calibration gas ports
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure Eagle 2 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDM2012-07 SDM-2012 Single Point Calibration Station for Gas Tracer with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, Two Demand Flow Regulators, 103L Cyl CO/CH4/O2, 103L Cyl 1,000 ppm CH4/Air & 103L Cyl Zero Air by RKI Instruments

RKI's new SDM-2012 calibration station for the GX-2012 is now available with advanced features for charging, calibration, & bump testing. Once you power up the GX-2012 inside the SDM-2012 calibration module, the GX-2012's display will indicate whether it's transmitting data, bump testing, calibrating, as well as the results of the bump test or calibration.

Stand Alone Station

The SDM-2012 is a versatile maintenance tool that automates the service of a GX-2012 portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing, with all records stored automatically for future upload to a PC via USB flash drive (PC software and flash drive included).

Multi Module System

The SDM-2012 can also be connected to a PC for automated calibration bump testing and archiving of datalog data from GX-2012 instruments. Up to ten SDM-2012 can be connected simultaneously using USB cables and the SDM-2012 includes connections for one or two calibration gas cylinders.

Stand Alone Station Features

• Stand-alone station (no PC Required)
• Charging (Li-Ion Battery Pack)
• Calibration
• Bump Test
• Save Bump Test and Calibration records
• Bump test and calibration records copy to USB jump drive
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure GX-2012 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States