Bw Clip )2

Part Number: GABXT

BW Technologies Replacement Alligator Clip

The BW Technologies Replacement Alligator Clip is a cost effective accessory that can be used on a multitude of BW Technologies products. The stainless steel clip is durable and heavy duty. It also comes with a screw to help secure the clip onto the device. The clip helps to maintain the hands free nature of the portable detection unit and can be used to secure the instrument to a belt, pocket, or hardhat.

Part Number: XTAG1

• Rugged, ultra-compact (4.2 x 2.4 x 1.4 in / 10.7 x 6.0 x 3.6 cm) and lightweight (5.6 oz. / 160 g)
• Simple one-button operation
• Standard datalogger (16 hours) and eventlogger (10 events)
• Durable, stainless steel alligator clip
• Integral concussion-proof boot for the most rugged environments
• Continuous LCD shows simultaneous gas concentrations for H2S,CO, O2, and combustibles (0-100% LEL or 0-5.0% Methane)
• Powered by a lithium polymer battery (run-time typically 14 hours;recharge in less than 3 hours)
• Provides 95 dB alarm tone and bright wide-angled alarm bars
• Equipped with internal vibrating alarm for high noise areas
• Backlight: in alarm (auto) and on demand reactivation
• Four alarm levels: Instant Low and High Alarm for all gases;TWA (time weighted average) and STEL (short term exposure limit) for H2S, CO; OL (over limit alarm)
• Simple automatic calibration procedure
• Fully compatible with BW's MicroDock II automatic test and calibration system
• Records TWA, STEL and maximum exposures to gas and displays readings on command
• User selectable options include: confi dence beep, latching alarm, calibration due date, bump due date, "SAFE" display function, multi-language, span concentration values, combustible sensor measurement selection (0-100%LEL or 0-5.0% v/v methane) and stealth mode
• Full function self-test of: sensor, battery, circuitry and audible/visual/vibration alarms
• Delivered ready for use with sensors, lithium polymer battey, stainless steel alligator belt clip, calibration hose/cap and instructions

BW Technologies Arm Band

The BW Technologies Arm Band allows users to clip their portable gas detection unit securely to the band and wear the device on their arm. By wearing the device on the arm, the gas detector is comfortably secured near the breathing areas. The comfortable nylon strap is secured with durable plastic clips to ensure a snug fit. The strap is a convenient and safe way to maintain the positioning of the device while preserving its hands free nature.

Part Number: GAARM1

BW Technologies Chest Harness

BW Technologies has a wide range of accessories designed to improve the usability of their product lines. The BW Technologies Chest Harness does just that. Simply secure the harness to your body and insert the monitor into the harness. The monitor will fit securely in place on your chest and near your breathing zones. The chest harness is comfortable and tough enough to withstand modern work environments. With the chest harness, the device can continue to be hands free.

Part Number: GACH2

BW Technologies Short Strap

The BW Technologies Short Strap works to attach your portable gas detection instrument to your body or clothing. The durable and tough double loop design allows users to clip the device onto a number of buttons and fasteners. Used another way, the device can be tied to the strap and worn on your arm. This cost effective security solution improves the portability of the detector and helps to ensure that the detector may be placed effectively near the user's breathing zones.

Part Number: GALY1

BW Technologies Neck Strap with Safety Release

The durable and tough BW Technologies Neck Strap comes with an added safety feature. When on site, the neck strap works to maintain the hands free nature of your portable device. Simply slip the device onto the strip and wear near your mouth or nose. In the event that the neck strap becomes caught in other equipment or is dangerously constricted, the safety release breaks away from the strap. The strap is adjustable and made with a durable industrial strength black cord.

Part Number: GANS1

BW Technologies Extension Strap

The BW Technologies Extension Strap easily clips to your gas detection equipment to give it greater mobility. The strap extends up to 4 feet. The durable plastic clip easily attaches to the gas detection instrument, and the tough nylon strap is outfitted with a wide comfort strip for easy carrying. The hardware on the strap is made of a tough plastic bend that can withstand workplace abuse and lifting.

Part Number: GAES1

SR-M-MC Replacement MICROceL Carbon Monoxide (CO) Sensor

• GasAlertMicroClip
• GasAlertMicroClip XT
• GasAlertMicroClip XL
• GasAlertMax XT
• GasAlertMax XT II

BW Technologies Carrying Holster for Detector and Sampling Probe

To outfit its vast collection of gas detection instruments, BW Technologies manufactures a range of accessories and replacement parts. For BW Technologies detection devices, the company produces a durable carrying holster that houses both the detector and sampling probe. The device easily fastens onto a utility belt with a nylon and plastic safety clip. The holster material is durable, flexible, and lightweight. It is also easily portable, and the convenient design allows users to easily position the holster in the most comfortable and convenient location.

Part Number: GAHXT

World's most versatile and economical multi-gas monitor

• Integrated sampling pump
• SmartSample technology and powerful diaphragm pump provide reliable block detection and consistent, uniform flow
• Easy-to-read, multi-language LCD displays all four gas concentrations (H2S, CO, O2 and combustibles) simultaneously
• Visual, vibrating and audible alarm indicators
• Low, High, TWA (time weighted average) and STEL (short-term exposure limit) alarms
• LCD icons help with fast and easy notification of detector operation
• Built-in concussion-proof boot
• Simple auto-calibration procedure
• Rechargeable batteries provide enough power for a 13-hour shift
• Best in class block detection with semi-conductor pressure sensor
• Easy, one-button interface for simple operation
• Flexible user options minimize training
• Tamper-proof field operation
• Multi-language support in English, French, German, Spanish and Portuguese
• Compatible with MicroDock II automated test and calibration system
• Confined space includes Concusision-proof boot with aliigator clip, carrying holster, 1 ft. sampling probe, 10 Ft. hose and quick disconnect, 3 ft. calibration hose with quick connect, IR connectivity kit with Fleet Manager II software, 0.5 LPM Regulator, Location for 34 Liter calibration gas cylinder and detector