Testo, Testo

0563 1080 108 Type K Waterproof Food Thermometer by Testo

In the food industry, temperature measurements are part of the daily routine. The quality of the products can only be tested and guaranteed by precise measurements. And this is also the only way to fulfil HACCP regulations.The testo 108 carries out spot-check measurements in seconds. Whether in the transport and storage of foods, in restaurants, in large kitchens or in chain restaurants.

Thanks to the softcase (protective cover). It is insensitive to moisture and water, and is safe from damage due to impact or dirt. Wherever temperature needs to be recorded, this instrument measures everything which is necessary.

• Easy operation and handling
• Instrument and probe waterproof (IP67)
• Conform to HACCP and EN 13485
• Universally applicable

0563 2051 205 Instrument Kit by Testo

The testo 205 is a robust food penetration measuring instrument for temperature and pH values, with automatic temperature compensation. The robust penetration measurement tip is exchangeable and insenstitive to dirt thanks to the hole diaphragm.

The instrument is especially well suited to pH measurements in semi-solid media such as meat. The storage cap filled with electrolyte gel is used for storing the probe between measurements.

Kit includes:

• One-hand pH/°C measuring instrument
• Penetration probe
• Storage cap
• Belt/wall holder

• pH tip embedded in breakage-proof plastic
• Combined penetration tip with temperature probe
• Maintenance-free gel electrolyte
• Measurement tip exchangeable by user
• Automatic final value recognition (auto-hold)
• 2-line, illuminated display
• 1, 2 or 3 point calibration possible

0563 2052 205 Starter Kit by Testo

The testo 205 is a robust food penetration measuring instrument for temperature and pH values, with automatic temperature compensation. The robust penetration measurement tip is exchangeable and insenstitive to dirt thanks to the hole diaphragm.

The instrument is especially well suited to pH measurements in semi-solid media such as meat. The storage cap filled with electrolyte gel is used for storing the probe between measurements.

Kit includes:

• One-hand pH/°C measuring instrument
• Penetration probe
• Storage cap
• Gel and calibration bottles 250 ml pH 4+7
• Belt/wall holder
• Aluminium case

• pH tip embedded in breakage-proof plastic
• Combined penetration tip with temperature probe
• Maintenance-free gel electrolyte
• Measurement tip exchangeable by user
• Automatic final value recognition (auto-hold)
• 2-line, illuminated display
• 1, 2 or 3 point calibration possible

0563 2061 206 pH1 Instrument Kit by Testo

The testo 206 series is ideally suited for applications in liquid and semi-solid media. The instruments stand out thanks to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free and insensitive to dirt.

The automatic final value recognition supports the user during measurement. The protective cover TopSafe provides the instruments with the protection class IP68, it is dishwasher-safe, hygienic and protects the measuring instrument from dirt, water and impact.

The testo 206-pH1 is specially designed for fast pH checks in liquids.

The testo 206-pH2 is ideally suited for pH measurement in semi-solid and protein-rich foods such as jellies, creams, cheese, fruit etc.

The testo 206-pH3 is equipped with a BNC socket which allows the connection of any pH probes to the instrument, depending on the application. This makes the instrument universally applicable.

Kit includes:

• One-hand pH/°C measuring instrument
• Protection class IP68, incl. storage cap with gel
• TopSafe
• Belt/wall holder

• Ideally suited to applications in liquid and semi-solid media (e.g. in the food sector)
• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover (TopSafe, protection class IP65)
• Automatic final value recognition (Auto-hold)
• Two-line display
• 1, 2, or 3-point calibration possible

0563 2062 206 pH2 Instrument Kit by Testo

The testo 206 series is ideally suited for applications in liquid and semi-solid media. The instruments stand out thanks to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free and insensitive to dirt.

The automatic final value recognition supports the user during measurement. The protective cover TopSafe provides the instruments with the protection class IP68, it is dishwasher-safe, hygienic and protects the measuring instrument from dirt, water and impact.

The testo 206-pH1 is specially designed for fast pH checks in liquids.

The testo 206-pH2 is ideally suited for pH measurement in semi-solid and protein-rich foods such as jellies, creams, cheese, fruit etc.

The testo 206-pH3 is equipped with a BNC socket which allows the connection of any pH probes to the instrument, depending on the application. This makes the instrument universally applicable.

Kit includes:

• One-hand pH/°C measuring instrument
• pH2 probe head for semi-solid substances, incl. storage cap with gel
• TopSafe
• Belt/wall holder

• Ideally suited to applications in liquid and semi-solid media (e.g. in the food sector)
• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover (TopSafe, protection class IP65)
• Automatic final value recognition (Auto-hold)
• Two-line display
• 1, 2, or 3-point calibration possible

0563 2063 206 pH3 Instrument Kit by Testo

The testo 206 series is ideally suited for applications in liquid and semi-solid media. The instruments stand out thanks to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free and insensitive to dirt.

The automatic final value recognition supports the user during measurement. The protective cover TopSafe provides the instruments with the protection class IP68, it is dishwasher-safe, hygienic and protects the measuring instrument from dirt, water and impact.

The testo 206-pH1 is specially designed for fast pH checks in liquids.

The testo 206-pH2 is ideally suited for pH measurement in semi-solid and protein-rich foods such as jellies, creams, cheese, fruit etc.

The testo 206-pH3 is equipped with a BNC socket which allows the connection of any pH probes to the instrument, depending on the application. This makes the instrument universally applicable.

Kit includes:

• One-hand pH/°C measuring instrument
• pH3 probe head with BNC interface
• TopSafe
• Belt/wall holder

• Ideally suited to applications in liquid and semi-solid media (e.g. in the food sector)
• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover (TopSafe, protection class IP65)
• Automatic final value recognition (Auto-hold)
• Two-line display
• 1, 2, or 3-point calibration possible

0563 2065 206 pH1 Starter Kit by Testo

The testo 206 series is ideally suited for applications in liquid and semi-solid media. The instruments stand out thanks to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free and insensitive to dirt.

The automatic final value recognition supports the user during measurement. The protective cover TopSafe provides the instruments with the protection class IP68, it is dishwasher-safe, hygienic and protects the measuring instrument from dirt, water and impact.

The testo 206-pH1 is specially designed for fast pH checks in liquids.

The testo 206-pH2 is ideally suited for pH measurement in semi-solid and protein-rich foods such as jellies, creams, cheese, fruit etc.

The testo 206-pH3 is equipped with a BNC socket which allows the connection of any pH probes to the instrument, depending on the application. This makes the instrument universally applicable.

Kit includes:

• One-hand pH/°C measuring instrument
• pH1 probe head for liquids, incl. storage cap with gel, calibration dosing bottles 250 ml pH 4 and 7
• TopSafe
• Belt/wall holder
• Aluminium case

• Ideally suited to applications in liquid and semi-solid media (e.g. in the food sector)
• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover (TopSafe, protection class IP65)
• Automatic final value recognition (Auto-hold)
• Two-line display
• 1, 2, or 3-point calibration possible

0563 2066 206 pH2 Starter Kit by Testo

The testo 206 series is ideally suited for applications in liquid and semi-solid media. The instruments stand out thanks to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free and insensitive to dirt.

The automatic final value recognition supports the user during measurement. The protective cover TopSafe provides the instruments with the protection class IP68, it is dishwasher-safe, hygienic and protects the measuring instrument from dirt, water and impact.

The testo 206-pH1 is specially designed for fast pH checks in liquids.

The testo 206-pH2 is ideally suited for pH measurement in semi-solid and protein-rich foods such as jellies, creams, cheese, fruit etc.

The testo 206-pH3 is equipped with a BNC socket which allows the connection of any pH probes to the instrument, depending on the application. This makes the instrument universally applicable.

Kit includes:

• One-hand pH/°C measuring instrument
• pH2 probe head for semisolid substances, incl. storage cap with gel
• TopSafe
• Belt/wall holder
• Aluminium case

• Ideally suited to applications in liquid and semi-solid media (e.g. in the food sector)
• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover (TopSafe, protection class IP65)
• Automatic final value recognition (Auto-hold)
• Two-line display
• 1, 2, or 3-point calibration possible

0563 2305 230 pH Meter Set by Testo

The testo 230 combines a complete pH measuring instrument and a full-value temperature measuring instrument in one compact splashproof housing. It reliably records pH values, reduction voltages and temperature in watery solutions as well as in semi-solid to solid media.

The instrument has an automatic temperature compensation, and can be calibrated with standard as well as DIN buffers in the pH area. Thanks to the possibility of connecting different pH probes, the testo 230 is universally applicable, not only for applications in the pharmaceutical industry, but also in the food sector and the field of HVAC.

Kit includes:

• Analysis instrument
• 2 electrode clips and battery
• Testo buffer set pH 4 7.50ml each
• Universal plastic electrode with temperature sensor plastic set case
• Batteries

• Measurement of pH and temperature in one instrument
• Display of calibration data and error reports
• Robust and splashproof according to protection class IP54
• Easily legible, 2-line display
• 1, 2, or 3-point calibration possible

0563 2700 270 Cooking Oil Tester with Reference Oil and Case by Testo

The testo 230 combines a complete pH measuring instrument and a full-value temperature measuring instrument in one compact splashproof housing. It reliably records pH values, reduction voltages and temperature in watery solutions as well as in semi-solid to solid media.

The instrument has an automatic temperature compensation, and can be calibrated with standard as well as DIN buffers in the pH area. Thanks to the possibility of connecting different pH probes, the testo 230 is universally applicable, not only for applications in the pharmaceutical industry, but also in the food sector and the field of HVAC.

• Measurement of pH and temperature in one instrument
• Display of calibration data and error reports
• Robust and splashproof according to protection class IP54
• Easily legible, 2-line display
• 1, 2, or 3-point calibration possible

0563 3100 310 Residential Analyzer Kit by Testo

The testo 310 has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. The instrument stands out thanks to its easy handling and simple menu structurey. You can read off the measurement values confidently and conveniently from the well-lit display, even in bad light conditions. The fuels are stored not just as numbers, but are each described. At the top edge of the clear display, the symbols for the different measurement menus are always in view. The display and the dirt-insensitive keypad are clearly structured. Operation is very easy even if you only have one hand free.

Kit Includes:

• testo 310 analyzer
• probe & hose
• silicon tubing
• extra particulate filters (5)
• pressure plugs (5)
• AC power supply/recharger (USB)
• calibraton certificate
• hard case

• Robust and light instrument for daily use
• 30 seconds sensor zeroing
• O2 and CO measurement
• Integrated magnets for easy fixing to burner

Applications:

• Flue gas measurement
• Draught measurement
• Ambient CO measurement
• Pressure measurement

0563 3163 Refrigerant Leak Detector by Testo

testo 316-3 is a reliable leackage detector for refrigerants which should be part of every professional's refrigeration technology equipment. It detects even the samllest leaks thanks to ist high level of sensitivity of 4 g/a, and fulfils the requirements of the F-gas regulation as well as the standards SAE J1627 and EN 14624:2012. The instrument is ready for use immediately after switching on, without the need for selecting a characteristic curve. Thanks to the automatic zeroing, the testo 316-3 detects leaks even in rooms which have already been contaminated.

LED indicator of leakage with simultaneous audible alarm

• High sensitivity 4 g/a allows the detection of the smallest leaks
• Detects all common refrigerants 3. Easiest possible operation thanks to a single button
• Easiest possible operation thanks to a single button
• Immediate readiness with no pre-settings

0563 3371 70 330-1G Long Life Kit #1 - Residential Analyzer Kit (with case) by Testo

Thanks to the new instrument functions, the Testo flue gas analyzers of the new testo 330-LL series now offer you even more professional and reliable support.

Kit Includes:

• 0632 3306 00 - 330-1G LL Combustion Analyzer
• 0600 9763 - 12" flue gas probe, 1/4" dia., w/ 7' hose
• 0554 1096 - Power supply / recharger (North American cord)
• 0554 3385 - Particle filters - pack of 10
• 0516 3330 - Standard case

• Graphic processing of measurement data
• Instrument diagnosis function uses easy "traffic light" presentation to enable comprehensive instrument diagnosis
• Pressure measurement up to 300 mbar
• User-defined fuels
• TÜV-tested according to 1. BImSchV / EN 50379 Part 2 for O2, °C, hPa and CO with H2-compensation
• Powerful memory management: 500,000 readings
• IrDa/ Bluetooth interface for data transfer to Pocket-PC / laptop / printer
• USB interface for data readout to a PC software
• ZIV (Central Guild Association) driver for all standard industry software packages

0563 3372 71 330-2G Long Life Kit #1 - O2 & CO (w/dilution) - Commercial / Industrial Combustion Kit by Testo

Thanks to the new instrument functions, the Testo flue gas analyzers of the new testo 330-LL series now offer you even more professional and reliable support.

Kit Includes:

• 0632 3307 51 - 330-2G LL Combustion Analyzer w/ auto CO dilution
• 0600 9763 - 12" flue gas probe (932º max) , 1/4" dia., w/ 7' hose
• 0515 0107 - Li-Ion battery (extra)
• 0554 1096 - Power supply / recharger (North American cord)
• 0554 3385 - Particle filters - pack of 10
• 0516 3330 - Standard case

• Graphic processing of measurement data
• Instrument diagnosis function uses easy traffic light presentation to enable comprehensive instrument diagnosis
• Pressure measurement up to 300 mbar
• User-defined fuels
• TÜV-tested according to 1. BImSchV / EN 50379 Part 2 for O2, °C, hPa and CO with H2-compensation
• Powerful memory management: 500,000 readings
• IrDa/ Bluetooth interface for data transfer to Pocket-PC / laptop / printer
• USB interface for data readout to a PC software
• ZIV (Central Guild Association) driver for all standard industry software packages
• In CO measurement, from 8.000 ppm, automatic dilution is carried out up to min. 30,000 ppm CO
• Integrated gas and draught zeroing without probe removal: The probe can remain in the flue during zeroing

0563 4354 435-4 Multifunction Meter with memory, software & integral differential pressure by Testo

The ambient air conditions measuring instrument, for asssessing Indoor Air Quality and tuning and testing VAC systems, stands out on account of its efficient measurement process. The user-friendly measuring instrument has the right measurement engineering for every application and different flow speeds; for example, thermal probes, vane or Pitot tube measurement. Probe-controlled menus and selectable user profiles, e.g. for duct measurement or long-term measurement, ensure the user-friendliest operation possible. The new IAQ probe measures Indoor Air Quality by measuring the CO2 level, air moisture and air temperature. In addition, lux and comfort level probes can be connected to measure draught air. Clear analysis and archiving ensure convenient documentation. Temperature and humidity measurement is built-in in the new thermal probe. The special flow protocol professionally documents duct measurements. It is also possible to connect additional temperature and humidity probes. Readings from up to 3 temperature or humidity probes can be displayed in the measuring instrument; data transmission is by radio, i.e. wireless.

• Instrument memory for 10,000 readings
• PC software for analysis, filing and documentation of measurement data
• IAQ probe, lux probe and comfort level probe
• Thermal probes, vane measurement and built-in differential pressure probe probe for Pitot tube measurement
• Radio probe for temperature and humidity
• Protection class IP54

0563 4760 476 Handheld Stroboscope by Testo

The testo 476 Pocket StrobeTM hand-held stroboscope measures and checks rotation and vibration movements. It facilitates the measurement of very small objects or in hard-to-access places. And all without interrupting the production process. testo 476 is therefore ideal for measuring rpm and inspecting high-frequency moving parts.

• High setting accuracy and stability thanks to dynamic setting dial
• High light intensity due to energy optimised switching electronics and powerful xenon flashlamp
• Powerful rechargeable battery pack for min. 2 hours' continuous operation without mains connection over the whole frequency range
• Trigger input for synchronizing flash sequence (long-term observation)
• Even higher light intensity with improved high-performance xenon flash lamp
• Tripod connection in housing
• Memory function (last reading is stored when switched off)
• Mains operation with simultaneous battery charging possible

0563 5506 550-2 Refrigeration System Analyzer (RSA) Deluxe Kit by Testo

testo 550: just switch on, measure, and read off Large figures allow the values to be read off the display quickly and easily. Two temperature-compensated pressure sensors measure high and low pressure quickly and precisely, and automatically calculate the temperatures. A glance at the instrument display is enough, and you see the measurement result. Two temperature inputs guarantee you the simultaneous calculation and display of superheating and subcooling. The temperature can additionally also be displayed. By simply pressing a button, you can switch between the measurement tasks at your will

Kits includes:

• 550 Refrigeration System Analyzer
• 0613 5505 - 2 Clamp probes (NTC)
• 0516 5505 - Hard carry case

• The digital manifold testo 550, ideal for all measurement work on refirgeration systems and heat pumps
• Robustness and extremely convenient operation
• Measurement of low and high pressure as well as calculation of temperatures
• Simultaneous calculation Of superheating and subcooling in real time
• 39 refrigerants already stored in instrument

0563 5572 557-2 Refrigeration System Analyzer (RSA) Kit by Testo

testo 557 is the ideal partner for all technicians who wish to carry out commissioning, service and maintenance on refrigeration systems and heat pumps quickly and efficiently.

The testo 557 is a digital manifold for commissioning, maintenance and service work on refrigeration systems and heat pumps. It replaces mechanical manifolds, thermometers and pressure/temperature tables. The 4-way valve block allows fast and efficient work, and the integrated vacuum measurement supports the evacuation of a system.

Kits includes:

• 0560 5570 - 557 Refrigeration System Analyzer
• 0613 5505 - 2 Clamp probes (NTC)
• 0516 5505 - Hard carry case

• up to 2 NTC probes can be connected
• High-quality sensors measure high and low pressure
• Calculation of superheating/subcooling in real time
• Temperature-compensated tightness testing
• Heat pump mode
• 40 refrigerants stored

0563 6251 625 Hygrometer with Integral Humidity Probe Head by Testo

The compact instrument with built-in humidity probe head for measuring air moisture and temperature. The large 2 line display shows humidity, wet bulb temperature or dewpoint as well as temperature. When measuring at hard-to-access points, the humidity probe head can be easily removed and attached to the handle via the probe cable (accessory). Alternatively, the readings can be transmitted wirelessly over wide distances from the probe to the measuring instrument. To do this, the humidity probe head is attached to the radio handle (accessory) and the radio module (accessory) is added to testo 625.

• Displays temperature and relative humidity / wet bulb temperature / dewpoint
• Max./min. values
• Hold button to freeze readings
• Display light
• Auto Off function
• TopSafe, the indestructible protection case (optional)
• Patented humidity sensor
• 2 year guaranteed long-term stability
• TopSafe, instrument protection against dirt and knocks (optional)

0563 7352 735-2 Compact Pro Thermometer with Memory & Software by Testo

The robust and compact measuring instrument with a probe socket for highly accurate Pt100 probes and two sockets for fast-action thermocouple probes. Readings from up to three additional temperature probes can be displayed in the testo 735-2 measuring instrument's clear display; data transmission is by radio, i.e. wireless. The measurement values can be simultaneously transferred to a PC and stored there. In this way, a total of 6 channels is recorded by the measuring instrument. A system accuracy of 0.05 °C with a resolution of 0.001 °C is reached using the plug-in highly accurate Pt100 immersion/penetration probe. The measuring instrument is therefore ideally suited for use as a working standard. Temperature characteristics are recorded in the instrument and then analysed in graphics and tables on your PC/Notebook. Data is printed on site on the Testo fast printer using infrared. Selectable user profiles, i.e. allocation of specific function buttons to an application facilitate intuitive and fast operation. Individual protocols or measurement series can be stored according to site. Up to 99 sites can be stored in the instrument. The storage cycle is user-defined between 0.5 seconds and 24 hours.

• System accuracy up to 0.05 °C
• Instrument memory for up to 10,000 readings
• PC software for filing, analysing and documenting measurement data (included)
• Displays, saves and prints Delta T, min, max and mean values
• Audible alarm if limit values are exceeded
• Protection class IP65
• Instrument memory for 10,000 readings (testo 735-2)
• PC software for filing and documenting measurement data (testo 735-2)
• Freely selectable storage cycle from 1 second to 24 hours
• Accuracy over the entire measurement range thanks to system adjustment
• The measurement values can be displayed in the instrument and simultaneously transferred to a PC and stored (testo 735-2)

0563 8051 805 Mini IR Thermometer with TopSafe by Testo

The compact 80 mm infrared thermometer fits into any pocket and is always within reach e.g. for measurements in Incoming goods and for checking the cold shelves in supermarkets. Also ideal for rapid measurements in the food industry and in the home.

Set includes:

• Mini infrared thermometer
• TopSafe
• Battery

• High accuracy in a critical area for food
• Packaging remains undamaged
• TopSafe is dishwasher-proof
• Display of minimum and maximum values
• Scan mode for permanent measurement
• Robust, waterproof protection case (IP65), optional
• Practical and compact, pocket-size
• High accuracy in the critical range for food
• Water-proof and robust on account of dishwasher-safe protection sleeve TopSafe (IP65)
• Minimum and maximum value display
• Scan mode for long-term measurements

0563 8155 815 Sound Level Meter by Testo

The ideal instrument for daily use. Whether it is for air conditioning or heating, disco noise, machine noise or noise in combustion systems, testo 815 is the ideal partner.

• Easy to adjust (adjustment screwdriver included)
• Frequency weighting to Characteristic A and C
• Maximum and minimum value memory
• Built-in tripod knuckle screw (1/4 inch)
• Switchable time weighting Fast / Slow
• testo 815:
• Frequency weighting
• Current value
• Time weighting
• Section measurement range

0563 8165 816 Sound Level Meter by Testo

Compared to testo 815, the larger model has additional features which make it ideal for assessors, workplace measurements and for measuring industrial and environmental noise.

• Easy to adjust (adjustment screwdriver included)
• Frequency weighting to characteristic A and C
• Maximum and minimum memory
• Built-in tripod knuckle screw (1/4 inch)
• Switchable time weighting Fast / Slow
• Automatic range switchover
• Backlit display
• Mains unit connection
• BarGraph display
• AC output to connection from recorders and amplifiers
• DC output with 10 mV/dB to connect recorders or dataloggers
• testo 816:
• Time weighting
• Section measurement range
• Frequency weighting
• Current reading
• Automatic range switchover
• Backlit display
• Mains unit connection
• Barograph display
• AC output for connecting recorders and amplifiers
• DC output with 10 mV/dB for connecting recorders or data loggers