Air Flow/Velocity, Testo

0560 4101 410-1 Pocket Pro Air Velocity & Temperature Meter by Testo

testo 410-1 measures air speed and temperature. It is ideal for quick spot checks at air outlets on account of its integrated measurement with the 40mm vane. Timed mean calculation is possible. In addition to air speed and temperature, testo 410-2 also measures air moisture. Testo's very own, patented humidity sensor guarantees accurate readings. In this way, air conditions can be reliably checked.

• Flow velocity measuring instrument with temperature measurement
• Integrated measurement with 40 mm vane
• Timed mean value calculation
• Hold function and max./min. values
• Windchill calculation for outside areas (perceived temperature)
• Display illumination
• Protective cap for safe storage
• Including wrist strap, belt holder and calibration protocol

0554 4203 Air Flow Capture Hood, 36" x 36" for Testo 420 by Testo

Optional 36" x 36" capture hood for use with the testo 420 air flow capture hood, for measurements at air inlets and outlets. Includes an integrated flow straightener for high-precision measurement results, with 35" x 35" inner dimensions.

0563 0003 Smart Probes VAC Set Wireless Smart Probe Kit by Testo

The testo VAC Smart Probe Set provides a combination of four instruments needed to test and balance a multioutlet ventilation system. Two types of anememoters give you the capacity to measure in-duct air flow and the flow from each vent. Using an IR temperature probe for surface temperatures will show you motor and electrical equipment conditions and an easy check of each outlet. The thermohygrometer will provide an assessment of the humidity and dewpoint concerns throughout the system. Users can remotely read the measurements from multiple probes by using the testo Smart Probes App. The kit comes with a handy case at a great value.

The testo Smart Probes App is a powerful and easy-touse tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results. Automatic calculations make it a snap! All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The App creates custom reports which can be saved and/or shared by email. All your data can be stored and retrieved saving you hours of time consuming paperwork!

• Measures air velocity, temperature, relative humidity, wet bulb / dewpoint, and calculate volume flow
• Kit includes instruments to measure, balance, troubleshoot, and optimize ventilation systems performance
• RH & air flow measurements in-duct and at registers viewed simultaneously in the testo Smart Probes App (605i, 405i, 410i)
• App calculates system enthalpy with air flow & RH probes
• Photograph objects with smart device, capturing measurement marker and temperature values for reference and reporting (805i)
• Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
• Tough, accurate, and easy-to-use
• For all HVAC/R technicians and contractors

400563 4200 420 Flow Hood Kit and Meter by Testo

The new testo 420 flow hood system is a lightweight, accurate and convenient solution for balancing volume flow at registers and returns. At turbulent outlets, the patented flow straighteners significantly improve measurement accuracy & stability, save time and eliminate the uncertainty of measuring turbulent outlet ducts. Positioning is especially easy with its ergonomic handles, and low weight of less than 6.4 lbs. The optional tripod stand provides convenient handling when testing in large buildings, or at greater heights. The testo 420 flow hood has a wide variety of optional interchangeable flow skirts in different sizes and configurations. The lightweight testo 420 is easy to setup and disassemble and comes in a convenient rollaround case.

The detachable 420 Multi-function flow instrument provides accurate and convenient measurements using the 420 flow hood, Pitot tubes, or the testo flow matrix. Bluetooth connectivity allows for a wide variety of test functions and reporting options using your smart phone or device. The powerful testo 420 App makes testing and reporting versatile, customizable, and convenient. The detachable 420 Multi-function flow instrument is a powerful and precise differential pressure instrument with available calculating and reporting functions built-in. When installed on the testo 420 flow hood, this multi-function flow instrument can be tilted or positioned for convenient viewing and handling.

View measured data from a remote location wirelessly on a smartphone or tablet (up to 65ft.).

• Patented flow straighteners greatly improve accuracy and stability of measurements at turbulent outlets
• Weighs less than 6.4 lbs. (2.9 kg.)
• Detachable 420 Multi-function flow instrument that can be used with the 420 flow hood, pitot tubes, or flow matrix
• Quick, easy remote monitoring and reporting with Bluetooth and free App
• Data logging using on-board 2 GB memory
• Logged data can be transfered to PC using mini-USB cable

Includes:

• Testo 420 flow hood base
• 24"x24" flow hood
• USB cable
• Batteries
• Soft case
• NIST certificate

0699 7077/2 Air Flow Matrix Kit with Testo 420 Meter by Testo

Includes:

• Air flow / velocity matrix, and 420 Multifunction Flow Instrument
• 6ft telescopic extension pole with ball swivel head
• 6ft silicon-free connection hoses, and attachment straps

0563 4200 420 Flow Hood with Soft Case by Testo

The new testo 420 flow hood system is a lightweight, accurate and convenient solution for balancing volume flow at registers and returns. At turbulent outlets, the patented flow straighteners significantly improve measurement accuracy & stability, save time and eliminate the uncertainty of measuring turbulent outlet ducts. Positioning is especially easy with its ergonomic handles, and low weight of less than 6.4 lbs. The optional tripod stand provides convenient handling when testing in large buildings, or at greater heights. The testo 420 flow hood has a wide variety of optional interchangeable flow skirts in different sizes and configurations. The lightweight testo 420 is easy to setup and disassemble and comes in a convenient rollaround case.

The detachable 420 Multi-function flow instrument provides accurate and convenient measurements using the 420 flow hood, Pitot tubes, or the testo flow matrix. Bluetooth connectivity allows for a wide variety of test functions and reporting options using your smart phone or device. The powerful testo 420 App makes testing and reporting versatile, customizable, and convenient. The detachable 420 Multi-function flow instrument is a powerful and precise differential pressure instrument with available calculating and reporting functions built-in. When installed on the testo 420 flow hood, this multi-function flow instrument can be tilted or positioned for convenient viewing and handling.

View measured data from a remote location wirelessly on a smartphone or tablet (up to 65ft.).

• Patented flow straighteners greatly improve accuracy and stability of measurements at turbulent outlets
• Weighs less than 6.4 lbs. (2.9 kg.)
• Detachable 420 Multi-function flow instrument that can be used with the 420 flow hood, pitot tubes, or flow matrix
• Quick, easy remote monitoring and reporting with Bluetooth and free App
• Data logging using on-board 2 GB memory
• Logged data can be transfered to PC using mini-USB cable

Includes:

• Testo 420 flow hood base
• 24"x24" flow hood
• USB cable
• Batteries
• Soft case

Dimensions: 405 x 170 x 85 mm

0516 0260 Smart Probe Case - VAC by Testo

Rugged on the outside, soft on the inside: the testo Smart Case "VAC" with a hard outer shell and integrated foam insert with compartments for a precise fit. You can use it to safely store and transport your Smart Probes testo 805i, testo 410i, testo 510i, testo 405i, testo 605i and testo 905i measuring instruments.

• Practical storage case for Smart Probes testo 805i, testo 410i, testo 510i, testo 405i, testo 605i and testo 905i (available separately)
• Outer: impact-resistant, flexible hard shell with zip
• Inner: protective foam insert with precise-fit compartments for each measuring instrument
• Compact dimensions: 270 x 190 x 60 mm

0516 1201 Carrying Case Compact Class by Testo

Service case for measuring instrument and probes, suitable for measuring instruments testo 416 / testo 425 / testo 512 / testo 110 / testo 112 / testo 720 / testo 922 / testo 925 / testo 926

Dimensions: 454 x 316 x 111 mm

0554 4172 Testovent 417 Flow Straightener by Testo

Testo is the only manufacturer providing a solution the problem of measuring equally easily and accurately at swirl outlets. The innovative volume flow straightener testovent 417 supports you perfectly in flow velocity measurement at swirl outlets. The volume flow straightener allows redirection of the swirling flow to an almost uniform flow which can then be reliably recorded with a vane anemometer or vane probes. Measurements at swirl outlets without the volume flow straightener lead to lower or higher measurement results, depending on the flow direction in which the swirl impacts onto the vane.

The volume flow straightener is used in combination with the optional measurement funnel testovent 417 and the optional vane anemometer testo 417 or the vane probes (Ø 100mm) of testo 435, testo 440 and testo 480.

• More accurate volume flow measurement independent of the swirl direction
• Reliable measurement results on swirl outlets
• Flow straightener retrofittable for existing Testo funnels sets

0554 4173 Testovent 417 Flow Straigthener Set by Testo

The air flow at swirl outlets is subject to major turbulence. As a result, it is very difficult to measure the volume flow correctly at these outlets using only a vane anemometer and funnels for the measurement. Higher or lower measurement results are generated depending on the flow direction in which the swirl hits the vane. This means that the ventilation system cannot be optimally adjusted.

Testo is the only manufacturer to offer a solution which enables you to take simple, precise measurements at swirl outlets. In conjunction with a funnel, the patented volume flow straightener testovent 417 offers you ideal assistance in measuring the volume flow at swirl outlets. The volume flow straightener makes it possible to change the turbulent flow to an almost uniform flow, which can then be reliably recorded using an optional vane anemometer.

In this set you get the testovent 417 volume flow straightener plus two funnels for ventilation grilles and plate outlets (testovent 417 funnel set). The funnels and the flow straightener can be conveniently transported in the practical case.

To measure the volume flow, you will also need a compatible vane anemometer, which you can order separately for example, the testo 417 vane anemometer or the vane probes (Ø 100 mm) for the testo 435 and testo 480.

• Convenient, quick volume flow measurement
• Accurate measurement even in turbulent flows
• Patented volume flow straightener
• Included in the set: volume flow straightener, two funnels and a practical case

0554 4200 Air Flow Capture Hood, 14" x 14" for Testo 420 by Testo

Optional 14" x 14" capture hood for use with the testo 420 air flow capture hood, for measurements at air inlets and outlets. Includes an integrated flow straightener for high-precision measurement results, with 13" x 13" inner dimensions.

0554 4201 Air Flow Capture Hood, 12" x 48" for Testo 420 by Testo

Optional 12" x 48" capture hood for use with the testo 420 air flow capture hood, for measurements at air inlets and outlets. Includes an integrated flow straightener for high-precision measurement results, with 11" x 47" inner dimensions.

0554 4202 Air Flow Capture Hood, 24" x 48" for Testo 420 by Testo

Optional 24" x 48" capture hood for use with the testo 420 air flow capture hood, for measurements at air inlets and outlets. Includes an integrated flow straightener for high-precision measurement results, with 23" x 47" inner dimensions.

0554 4209 Extendable Tripod with Wheels, 13.1' for Testo 420 by Testo

Sturdy, wheeled tripod for large jobs, or sites with high installed outlets.

Wheeled tripod (extendable up to 13.1 feet) for use with the testo 420 air flow capture hood ideal for measuring at ceiling outlets. The wheels are easily detachable.

0560 1405 01 405i Hot-wire Anemometer Wireless Smart Probe by Testo

The testo 405i Smart Probe hot-wire anemometer is a wireless instrument for measuring air flow velocity, temperature, and volume flow. It is equipped with a telescopic shaft which extends to 15" for easy in-duct testing. You can reliably determine timed and multipoint flow traverses. Users can read the measurements using the testo Smart Probes App installed on their smart device. The app lets users configure duct dimensions to calculate volume flow measurements. Use the testo 405i along with the testo 605i thermo-hygrometer to determine cooling and heating performance. The testo 405i works on smart devices with either Android or Apple operating systems.

The testo Smart Probes App is a powerful and easy-touse tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results. Automatic calculations make it a snap! All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The App creates custom reports which can be saved and/or shared by email. All your data can be stored and retrieved saving you hours of time consuming paperwork!

• Measures air velocity, volume flow, and temperature
• Measures in-duct air flow and automatically calculates volume flow (enter duct dimensions simply)
• Small dia. (<0.5") and 15" telescopic shaft length is ideal for in-duct flow averaging and timed traverse
• Perform air duct leakage tests
• Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
• Tough, accurate, and easy-to-use
• For all HVAC/R technicians and contractors

0560 1410 01 410i Vane Anemometer Wireless Smart Probe by Testo

The testo 410i Smart Probe is a compact wireless vane anemometer for measuring air velocity, and temperature and deriving volume flow. It is used at air outlets, and for monitoring the air flow of ventilation systems. Users can read the measurements using the testo Smart Probes App installed on their smart device. It is easy to configure volume flow measurements and to reliably run timed multipoint averaging traverses. It is especially useful for balancing multi-outlet ventilation systems by using several instruments. The testo 410i works on smart devices with either Android or Apple operating systems.

The testo Smart Probes App is a powerful and easy-touse tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results. Automatic calculations make it a snap! All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The App creates custom reports which can be saved and/or shared by email. All your data can be stored and retrieved saving you hours of time consuming paperwork!

• Measures air velocity, volume flow, and temperature
• No air density correction required due to design
• Measures air flow at registers and automatically calculates volume flow (enter duct dimensions simply)
• Measure volume flow at several outlets simultaneously (using mutiple Smart Probes) to adjust system balance
• Timed/multipoint averaging to get accurate air flow profiles
• Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
• Tough, accurate, and easy-to-use
• For all HVAC/R technicians and contractors

0560 4053 405-V1 Thermo-Anemometer (metric only) by Testo

testo 405 is a thermal anemometer with a telescopic handle (max. extension length: 300 mm). It facilitates the measurement of air flow, volume flow and temperature.

• Volume flow calculation up to 99,990 m3/h
• Temperature measurement
• Ideal for measurements in ducts
• Easy-to-read readings thanks to swivel display
• Telescopic handle to 300 mm
• Sensor protected by rotatable protection cap, 300 mm long telescopic handle

0560 4102 410-2 Pocket Pro Air Velocity, Temperature & RH Meter by Testo

testo 410-2 is designed for the measurement of air flow velocity, temperature and humidity. Testo's own patented humidity sensor guarantees reliable measurement results. Thanks to the integrated measurement with the 40 mm vane, it is ideally suited for fast spot checks at air vents. A timed mean value calculation is possible. The measuring instrument is very handy, small and easy to operate.

• Flow velocity measuring instrument with temperature measurement
• Integrated measurement with 40 mm vane
• Timed mean value calculation
• Hold function and max./min. values
• Windchill calculation for outside areas (perceived temperature)
• Display illumination
• Protective cap for safe storage
• Including wrist strap and belt holder
• Air humidity measurement with long-term stable Testo humidity sensor
• Incl. dewpoint calculation and wet bulb
• Incl. calibration protocol

0560 4160 410-2 Pocket Pro Air Velocity, Temp & RH Meter by Testo

The compact testo 416 anemometer with permanently attached vane probe with telescopic handle (max. 890mm). Volume flow is shown directly in the display. Accurate volume flow calculation due to easy input of duct area. Timed and multi-point mean calculation provide information on mean volume flow. Min/max values can also be shown in the display. The Hold function enables you to freeze the current reading in the display.

• Direct display of volume flow
• Multi-point or timed mean calculation
• Max/min values
• Hold button to freeze readings
• Display light
• Auto-Off function
• TopSafe, the indestructible protective case (optional)
• TopSafe, instrument protection against dirt and knocks (optional)