Testo, Test and Measurement

0590 0013 Set Lead Extensions (straight plug) by Testo

The cables supplied with the measuring instrument are not always the best solution. Depending on the application, a measuring cable extension is the best choice. Because you can make a direct connection between the measuring instrument and for instance a banana jack, without needing to use cumbersome crocodile clips. The same applies for example to test sockets, which are often present on boards. The measuring cable extension can also be used for crocodile clips, such as the Testo safety crocodile clips (0590 0008), which means there are universal application options.

• CAT IV 600 V / CAT III 1000 V measurement category
• Maximum current: 10 A
• 1 set of measuring cable extensions with straight plug
• For attachment onto standard measuring cables

Includes:

1 set of measuring cable extensions (straight plug) , length: 1115 mm.

0590 0015 Set Replacement Tips testo 755 by Testo

These replacement measuring tips can quickly replace existing measuring tips. Simply remove the faulty measuring tips from the plug-in connection and attach the replacement measuring tips.

The grips of the replacement measuring tips offer a secure hold and so ensure easy measurement of electrical parameters.

• CAT IV 600 V / CAT III 1000 V measurement category
• 1 set of replacement measuring tips

Includes:

1 set of replacement measuring tips for current/voltage testers.

0590 0016 Carrying Case testo 760 by Testo

You can securely store your measuring instrument and accessories in the robust transport bag with a hard outer shell. The two internal mesh compartments ensure the stored items are properly held in place.

• Outside: impact-resistant transport bag with zip fastener
• Inside: two mesh compartments
• Dimensions: 215 x 150 x 70 mm

Includes:

Transport bag (without measuring instrument and accessories).

0590 0017 Carrying Case testo 770 by Testo

You can securely store your measuring instrument and accessories in the robust transport bag with a hard outer shell. The two internal mesh compartments ensure the stored items are properly held in place.

• Outside: impact-resistant transport bag with zip fastener
• Inside: two mesh compartments
• Dimensions: 270 x 150 x 75 mm

Includes:

Transport bag (without measuring instrument and accessories).

0590 0018 Carrying Case testo 750/testo 755 by Testo

You can securely store your measuring instrument and accessories in the robust transport bag with a hard outer shell. The two internal mesh compartments ensure the stored items are properly held in place.

• Outside: impact-resistant transport bag with zip fastener
• Inside: two mesh compartments
• Dimensions: 285 x 110 x 50 mm

Includes:

Transport bag (without measuring instruments and accessories).

0590 0021 Thermocouple Adapter Type K (770-2/-3) by Testo

Using the clamp meter, it is also possible to measure temperatures in addition to electrical parameters. This adapter is used to attach type K thermocouple temperature probes to your clamp meter.

Simply insert the adapter into the clamp meter and attach a type K thermocouple temperature probe onto the adapter. Please note that temperatures can only be measured in the range between -20 and +500°C.

The adapter enables accurate temperature measurement, because it has ambient temperature compensation.

• For attaching type K thermocouple temperature probes
• Measuring range -20 to +500°C

Includes:

Adapter for type K thermocouples, including lithium battery CR 2032.

0590 7450 745 Non-Contact Voltage Tester by Testo

The testo 745 non-contact voltage (NCV) tester quickly checks for the presence of voltage in AC powered systems. It can be safely used up to 1000 V AC. When AC voltage is detected, the testo 745 gives indication by flashing RED LEDs and buzzing audible tones.

You can easily determine the hot and neutral legs of an outlet without lengthy and risky removal of the outlet. The testo 745 NCV has a built-in Low Pass Filter which greatly reduces high frequency interference which causes false indications. The built-in LED flashlight is bright and focused to make testing simple in dark spaces. It also includes a low battery indication and is waterproof and dustproof rated per IP 67. The testo 745 is rated to CAT III 1000 V and CAT IV 600 V.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• Two sensitivity levels with audible and visual indication
• Flashing LED indicates sensitivity range down to 12 V AC or standard range above 50 V AC
• Differentiates hot from neutral in AC outlets
• Low Pass Filter reduces false indications
• Waterproof and dustproof to IP 67
• Bright LED flashlight illuminates test area

0590 7501 750-1 Voltage, Continuity, Phase Sequence Tester by Testo

The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

The testo 750-2 includes a single probe voltage testing, built-in flashlight, and GFCI test function. The 750-2/-3 can perform GFCI Circuit tests on AC outlets. When performing a GFCI circuit test, a 35 mA load is applied to the circuit.

The testo 750 vibrates ensuring that the GFCI circuit test is active. In addition to the above features, the testo 750-3 includes a 3-digit LCD showing the actual voltage measurements.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• GFCI Test Function
• Patented all-around viewable LED voltage bar indication
• 0 to 690 V AC/DC voltage measurement
• Polarity detection for VDC measurements
• Phase sequence test for determining motor rotation
• Two handed operation with anti-slip rings for safer voltage measurements
• Built-in flashlight for testing in dark places
• Continuity test with audible and visual indications
• Dust and water protection to IP 64

0590 7502 750-2 Voltage, Continuity, Phase Sequence Tester with GFCI Test & Flashlight by Testo

The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

The testo 750-2 includes a single probe voltage testing, built-in flashlight, and GFCI test function. The 750-2/-3 can perform GFCI Circuit tests on AC outlets. When performing a GFCI circuit test, a 35 mA load is applied to the circuit.

The testo 750 vibrates ensuring that the GFCI circuit test is active. In addition to the above features, the testo 750-3 includes a 3-digit LCD showing the actual voltage measurements.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• GFCI Test Function
• Patented all-around viewable LED voltage bar indication
• 0 to 690 V AC/DC voltage measurement
• Polarity detection for VDC measurements
• Phase sequence test for determining motor rotation
• Two handed operation with anti-slip rings for safer voltage measurements
• Built-in flashlight for testing in dark places
• Continuity test with audible and visual indications
• Dust and water protection to IP 64

0590 7503 750-3 Voltage, Continuity, Phase Sequence Tester with GFCI Test, 3 Digit LCD, & Flashlight by Testo

The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

The testo 750-2 includes a single probe voltage testing, built-in flashlight, and GFCI test function. The 750-2/-3 can perform GFCI Circuit tests on AC outlets. When performing a GFCI circuit test, a 35 mA load is applied to the circuit.

The testo 750 vibrates ensuring that the GFCI circuit test is active. In addition to the above features, the testo 750-3 includes a 3-digit LCD showing the actual voltage measurements.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• GFCI Test Function
• Patented all-around viewable LED voltage bar indication
• 0 to 690 V AC/DC voltage measurement
• Polarity detection for VDC measurements
• Phase sequence test for determining motor rotation
• Two handed operation with anti-slip rings for safer voltage measurements
• Built-in flashlight for testing in dark places
• Continuity test with audible and visual indications
• Dust and water protection to IP 64

0590 7551 755-1 Current/Voltage Tester by Testo

The testo 755 current/voltage testers are fast and easy to use, especially when you are testing many circuits. The convenient open-jaw current tester automatically turns on when voltage exceeds 6V. It then auto-selects the correct parameters and range for your test. These rugged testers are suitable for virtually all your daily electrical measuring tasks. The instruments include important functions such as current, voltage, resistance & continuity. The integrated flashlight enables users to work in poorly lit areas.

The overall design is for convenient testing including interchangable measuring tips which can be easily updated and maintained. A convenient lead holder is integrated into the housing for safe and easy storage. The testo 755-2 includes important additional features: phase rotation, voltage range up to 1000V, and the unique feature which allows the user to check for voltage using only a single lead.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• Meter automatically detects testing in-process and selects correct meter configuration which saves time and optimizes accuracy
• Polarity detection for DC circuits
• 3-phase sequence check with motor rotation indication
• Single lead voltage test with audible indication
• Interchangeable measuring tips
• Built-in flashlight illuminates your measurements
• APO (Automatic Power Off) below 6 VAC

0590 7552 755-2 Current/Voltage Tester with Phase Rotation and Single Probe Voltage Detection by Testo

The testo 755 current/voltage testers are fast and easy to use, especially when you are testing many circuits. The convenient open-jaw current tester automatically turns on when voltage exceeds 6V. It then auto-selects the correct parameters and range for your test. These rugged testers are suitable for virtually all your daily electrical measuring tasks. The instruments include important functions such as current, voltage, resistance & continuity. The integrated flashlight enables users to work in poorly lit areas.

The overall design is for convenient testing including interchangable measuring tips which can be easily updated and maintained. A convenient lead holder is integrated into the housing for safe and easy storage. The testo 755-2 includes important additional features: phase rotation, voltage range up to 1000V, and the unique feature which allows the user to check for voltage using only a single lead.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• Meter automatically detects testing in-process and selects correct meter configuration which saves time and optimizes accuracy
• Polarity detection for DC circuits
• 3-phase sequence check with motor rotation indication
• Single lead voltage test with audible indication
• Interchangeable measuring tips
• Built-in flashlight illuminates your measurements
• APO (Automatic Power Off) below 6 VAC

0590 7601 760-1 Digital Multimeter with Capacitance & Auto Setup by Testo

Testo's exclusive auto-test setup enables the user to simply turn on the unit, connect the leads, and begin measuring. The testo 760 Digital Multimeter detects the lead connection and prevents switching from V to A or A to V if leads are not in proper socket. This prevents accidentally blowing the meter's fuse because of incorrect connections. The function and range settings are always correct because the measurement parameters are detected and set automatically. Three easy-to-read buttons replace the traditional rotary switch when selecting manual test functions.

Additional benefits:

• APO (Auto Power Off) saves battery life
• Overmold housing makes it rugged
• Large, backlit, dual readout display with analog bar graph is easy-to-read
• Lead holder conveniently molded into housing for easy storing

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• Auto test-setup based upon lead connection prevents blown fuses in the meter
• Meter prevents switching from V to A or A to V if leads are not in the proper socket
• Meter automatically detects testing in-process and selects correct meter configuration to save time and optimize accuracy
• 3 buttons that illuminate for easy and clear selection of test functions
• Low Pass Filter and Duty Cycle standard
• Measure up to 400 A with optional clamp probe adapter
• Heavy Duty - Drop and water resistant for tough conditions

0590 7602 760-2 Digital Multimeter with TRMS, Capacitance, LPF, Auto Setup, Duty Cycle & Temperature by Testo

Testo's exclusive auto-test setup enables the user to simply turn on the unit, connect the leads, and begin measuring. The testo 760 Digital Multimeter detects the lead connection and prevents switching from V to A or A to V if leads are not in proper socket. This prevents accidentally blowing the meter's fuse because of incorrect connections. The function and range settings are always correct because the measurement parameters are detected and set automatically. Three easy-to-read buttons replace the traditional rotary switch when selecting manual test functions.

Additional benefits:

• APO (Auto Power Off) saves battery life
• Overmold housing makes it rugged
• Large, backlit, dual readout display with analog bar graph is easy-to-read
• Lead holder conveniently molded into housing for easy storing

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• Auto test-setup based upon lead connection prevents blown fuses in the meter
• Meter prevents switching from V to A or A to V if leads are not in the proper socket
• Meter automatically detects testing in-process and selects correct meter configuration to save time and optimize accuracy
• 3 buttons that illuminate for easy and clear selection of test functions
• Low Pass Filter and Duty Cycle standard
• Measure up to 400 A with optional clamp probe adapter
• Heavy Duty - Drop and water resistant for tough conditions

0590 7603 760-3 1000V Digital Multimeter with TRMS, Capacitance, LPF, Auto Setup, Duty Cycle & Temperature by Testo

Testo's exclusive auto-test setup enables the user to simply turn on the unit, connect the leads, and begin measuring. The testo 760 Digital Multimeter detects the lead connection and prevents switching from V to A or A to V if leads are not in proper socket. This prevents accidentally blowing the meter's fuse because of incorrect connections. The function and range settings are always correct because the measurement parameters are detected and set automatically. Three easy-to-read buttons replace the traditional rotary switch when selecting manual test functions.

Additional benefits:

• APO (Auto Power Off) saves battery life
• Overmold housing makes it rugged
• Large, backlit, dual readout display with analog bar graph is easy-to-read
• Lead holder conveniently molded into housing for easy storing

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• Auto test-setup based upon lead connection prevents blown fuses in the meter
• Meter prevents switching from V to A or A to V if leads are not in the proper socket
• Meter automatically detects testing in-process and selects correct meter configuration to save time and optimize accuracy
• 3 buttons that illuminate for easy and clear selection of test functions
• Low Pass Filter and Duty Cycle standard
• Measure up to 400 A with optional clamp probe adapter
• Heavy Duty - Drop and water resistant for tough conditions

0590 7701 770-1 TRMS Clamp Meter by Testo

The testo 770 Hook-clamp Digital Multimeter (DMM) is ideally suited for electrical work in HVAC applications. Testo's unique hooking clamp can be used to separate then grab wires. The easy hook-off retractable post releases the wires when testing is complete. You can safely work in tight spaces without using your hands. The 770 series identifies the testing in-process and automatically selects the correct meter configuration which saves you time and increases your accuracy.

The 770 series of instruments are rich in the features HVAC techs need and want including TRMS, starting current, and frequency measurement. The 770-2, which includes A can also measure temperature using the included Type K thermocouple adapter. The 770-3 (temperature adapter optional) additionally includes real-time power measurements (Watts), and Bluetooth. The 770-3 links to the Testo Smart Probes App and can be used for remote viewing, monitoring trending over time, and creating reports. The powerful app allows you to create custom reports that include photos, data, and graphs that can be saved or sent via email.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• Unique hook-on function separates and grabs wires without using your hands, retractable post releases wires easily
• Automatically detects AC/DC for Volts or Amps, and selects the correct range
• Bluetooth connection to testo Smart Probe App (770-3 only)
• Real-time power measurement (Watts)
• Standard features: Inrush (starting) current capture; Min/Max/Hold
• Additional features (770-2/-3 only): μA for flame rod; High capacitance; Frequency measurement for variable drives

0590 7702 770-2 TRMS Clamp Meter & Adapter for Type K Thermocouple by Testo

The testo 770 Hook-clamp Digital Multimeter (DMM) is ideally suited for electrical work in HVAC applications. Testo's unique hooking clamp can be used to separate then grab wires. The easy hook-off retractable post releases the wires when testing is complete. You can safely work in tight spaces without using your hands. The 770 series identifies the testing in-process and automatically selects the correct meter configuration which saves you time and increases your accuracy.

The 770 series of instruments are rich in the features HVAC techs need and want including TRMS, starting current, and frequency measurement. The 770-2, which includes A can also measure temperature using the included Type K thermocouple adapter. The 770-3 (temperature adapter optional) additionally includes real-time power measurements (Watts), and Bluetooth. The 770-3 links to the Testo Smart Probes App and can be used for remote viewing, monitoring trending over time, and creating reports. The powerful app allows you to create custom reports that include photos, data, and graphs that can be saved or sent via email.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• Unique hook-on function separates and grabs wires without using your hands, retractable post releases wires easily
• Automatically detects AC/DC for Volts or Amps, and selects the correct range
• Bluetooth connection to testo Smart Probe App (770-3 only)
• Real-time power measurement (Watts)
• Standard features: Inrush (starting) current capture; Min/Max/Hold
• Additional features (770-2/-3 only): μA for flame rod; High capacitance; Frequency measurement for variable drives

0590 7703 770-3 TRMS Clamp Meter with Power & Bluetooth by Testo

The testo 770 Hook-clamp Digital Multimeter (DMM) is ideally suited for electrical work in HVAC applications. Testo's unique hooking clamp can be used to separate then grab wires. The easy hook-off retractable post releases the wires when testing is complete. You can safely work in tight spaces without using your hands. The 770 series identifies the testing in-process and automatically selects the correct meter configuration which saves you time and increases your accuracy.

The 770 series of instruments are rich in the features HVAC techs need and want including TRMS, starting current, and frequency measurement. The 770-2, which includes A can also measure temperature using the included Type K thermocouple adapter. The 770-3 (temperature adapter optional) additionally includes real-time power measurements (Watts), and Bluetooth. The 770-3 links to the Testo Smart Probes App and can be used for remote viewing, monitoring trending over time, and creating reports. The powerful app allows you to create custom reports that include photos, data, and graphs that can be saved or sent via email.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• Unique hook-on function separates and grabs wires without using your hands, retractable post releases wires easily
• Automatically detects AC/DC for Volts or Amps, and selects the correct range
• Bluetooth connection to testo Smart Probe App (770-3 only)
• Real-time power measurement (Watts)
• Standard features: Inrush (starting) current capture; Min/Max/Hold
• Additional features (770-2/-3 only): μA for flame rod; High capacitance; Frequency measurement for variable drives

Measuring Range: -200 to +900°C