$25 - $50, Testo, Test and Measurement

0560 1110 Standard Mini Penetration Thermometer by Testo

The quick-action immersion/penetration thermometer is ideal for measuring the temperature in air, soft or powdery substances and liquids.

• Large, easy-to-read display
• Battery level display
• Switchover from °C to °F at the touch of a button
• Measurements from -50 to +150 °C

Includes:

Mini penetration thermometer, including protective tube with integrated clip, batteries and calibration protocol.

0572 2020 Saveris 2 Power Supply, 5V DC / 900mA by Testo

USB Power Supply for testo Saveris 2 and testo 160 Wi-Fi dataloggers. When the power supply is connected, the battery power is turned off; no need to remove batteries. Batteries can stay installed, for battery backup, in the event of a loss of power.

Input: 100-240 VAC, 50-60 Hz
Output: 5V DC / 900 mA
USB-A to Micro-B Cable, 4.9 ft. (1.5 m)

• 4.92 ft. / 1.5 m USB-A to Micro-B cable
• Power supply with a set of international plugs
• Power supply not to be connected to PC
• Micro-B USB plug connects to Wi-Fi data logger

USB Power Supply for testo Saveris 2 and testo 160 Wi-Fi data loggers. When the power supply is connected, the battery power is turned off; no need to remove batteries. Batteries can stay installed, for battery backup, in the event of a loss of power.

Delivery Scope

USB Power Supply for testo Saveris 2 and testo 160 Wi-Fi data loggers, including USB cable, and 1 set of changeable international plugs

0590 0001 Magnetic Hanger by Testo

Use the magnetic suspension system for quick attachment of digital multimeters to metal surfaces, for example on heating systems or switching cabinets. Simply thread the suspension system through on the rear of the measuring instrument. Thanks to the magnet, digital multimeter and suspension system adhere to the equipment - which means you have both hands free for your measurement.

• Fast attachment of digital multimeters, e.g. onto switching cabinets
• Both hands free for measurement thanks to the magnetic suspension system

Includes:

Magnetic suspension system.

0590 0002 Thermocouple Adapter Type K for 760-2/-3 by Testo

Using the digital multimeter, it is also possible to measure temperatures in addition to electrical parameters. This adapter is used to attach type K thermocouple temperature probes to your digital multimeter.

Simply insert the adapter into the digital multimeter and attach a type K thermocouple temperature probe onto the adapter. Please note that temperatures can only be measured in the range between -20 and +500°C.

The adapter enables accurate temperature measurement, because it has ambient temperature compensation.

• For attaching type K thermocouple temperature probes
• Measuring range -20 to +500°C

Includes:

Adapter for type K thermocouples, including lithium battery CR 2032.

0590 0005 Fuse Set 5x 10A/600V by Testo

Use the spare fuses when the fuse in your measuring instrument is faulty. These spare fuses have an overload protection of 10 A / 600 V.

• 10 A / 600 V overload protection
• Delivery quantity: 5 items

Includes:

Spare 10 A/600 V fuses, 5 items.

0590 0006 Fuse Set 5x 630mA/1000V by Testo

Use the spare fuses when the fuse in your measuring instrument is faulty. These spare fuses have an overload protection of 630 mA / 1000 V.

• 630 mA / 1000 V overload protection
• Delivery quantity: 5 items

Includes:

Spare 630 mA/1000 V fuses, 5 items.

0590 0007 Fuse Set 5x 630mA/600V by Testo

Use the spare fuses when the fuse in your measuring instrument is faulty. These spare fuses have an overload protection of 630 mA / 600 V.

• 630 mA / 600 V overload protection
• Delivery quantity: 5 items

Includes:

Spare 630 mA/600 V fuses, 5 items.

0590 0008 Set Saftey Alligator Clips by Testo

If you want to carry out easy measurements on systems, these safety crocodile clips are just right for you! The large dimensions mean they are easy to grip and therefore make it easier to clamp cables.

For mounting, the safety crocodile clips made of hard plastic are simply attached to the Testo standard measuring cables (order-number 0590 0011; 0590 0012; 0590 0013; 0590 0014) or other makes of measuring cables.

• CAT III 600 V measurement category
• Maximum current: 10 A
• For attachment onto Testo standard measuring cables (order-number 0590 0011; 0590 0012; 0590 0013; 0590 0014) or other makes of measuring cables
• Delivery quantity: 1 set of safety crocodile clips

Includes:

1 set of safety crocodile clips, CAT III 600 V measurement category, maximum current 10 A.

0590 0009 Set Alligator Clips by Testo

Crocodile clips are practical when measuring electrical parameters, because you can clamp the cable with them. For mounting, the crocodile clips are simply attached to the Testo standard measuring cables (order-number 0590 0010) or other makes of measuring cables.

• CAT IV 600 V / CAT III 1000 V measurement category
• Maximum current: 10 A
• For attachment onto Testo standard measuring cables (order-number 0590 0010) or other makes of measuring cables
• Delivery quantity: 1 set of crocodile clips

Includes:

1 set of crocodile clips, CAT IV 600 V / CAT III 1000 V measurement category, maximum current 10 A.

0590 0010 Set 2mm Test Leads (90° plug) by Testo

These high-quality standard measuring cables with an angled plug and an 0.7 inch long tip can be attached to Testo clamp meters, Testo digital multimeters or other makes of multimeter. The rubber-coated grips of the standard measuring cables offer a secure hold and so ensure easy measurement of electrical parameters.

• CAT II 1000 V measurement category
• Tip Ø: 0.07 in.; tip length: 0.7 in.
• 1 set of measuring cables with angled plug

Includes:

1 set of standard measuring cables (angled plug), tip &Oslah;: 0.07 in.; tip length: 0.7 in.

0590 0013 Set Lead Extensions (straight plug) by Testo

The cables supplied with the measuring instrument are not always the best solution. Depending on the application, a measuring cable extension is the best choice. Because you can make a direct connection between the measuring instrument and for instance a banana jack, without needing to use cumbersome crocodile clips. The same applies for example to test sockets, which are often present on boards. The measuring cable extension can also be used for crocodile clips, such as the Testo safety crocodile clips (0590 0008), which means there are universal application options.

• CAT IV 600 V / CAT III 1000 V measurement category
• Maximum current: 10 A
• 1 set of measuring cable extensions with straight plug
• For attachment onto standard measuring cables

Includes:

1 set of measuring cable extensions (straight plug) , length: 1115 mm.

0590 0015 Set Replacement Tips testo 755 by Testo

These replacement measuring tips can quickly replace existing measuring tips. Simply remove the faulty measuring tips from the plug-in connection and attach the replacement measuring tips.

The grips of the replacement measuring tips offer a secure hold and so ensure easy measurement of electrical parameters.

• CAT IV 600 V / CAT III 1000 V measurement category
• 1 set of replacement measuring tips

Includes:

1 set of replacement measuring tips for current/voltage testers.

0590 0016 Carrying Case testo 760 by Testo

You can securely store your measuring instrument and accessories in the robust transport bag with a hard outer shell. The two internal mesh compartments ensure the stored items are properly held in place.

• Outside: impact-resistant transport bag with zip fastener
• Inside: two mesh compartments
• Dimensions: 215 x 150 x 70 mm

Includes:

Transport bag (without measuring instrument and accessories).

0590 0017 Carrying Case testo 770 by Testo

You can securely store your measuring instrument and accessories in the robust transport bag with a hard outer shell. The two internal mesh compartments ensure the stored items are properly held in place.

• Outside: impact-resistant transport bag with zip fastener
• Inside: two mesh compartments
• Dimensions: 270 x 150 x 75 mm

Includes:

Transport bag (without measuring instrument and accessories).

0590 0018 Carrying Case testo 750/testo 755 by Testo

You can securely store your measuring instrument and accessories in the robust transport bag with a hard outer shell. The two internal mesh compartments ensure the stored items are properly held in place.

• Outside: impact-resistant transport bag with zip fastener
• Inside: two mesh compartments
• Dimensions: 285 x 110 x 50 mm

Includes:

Transport bag (without measuring instruments and accessories).

0590 0021 Thermocouple Adapter Type K (770-2/-3) by Testo

Using the clamp meter, it is also possible to measure temperatures in addition to electrical parameters. This adapter is used to attach type K thermocouple temperature probes to your clamp meter.

Simply insert the adapter into the clamp meter and attach a type K thermocouple temperature probe onto the adapter. Please note that temperatures can only be measured in the range between -20 and +500°C.

The adapter enables accurate temperature measurement, because it has ambient temperature compensation.

• For attaching type K thermocouple temperature probes
• Measuring range -20 to +500°C

Includes:

Adapter for type K thermocouples, including lithium battery CR 2032.

Measuring Range: -50 to +400 °C