$25 - $50, AquaPhoenix

5152 Test Strips: Quat, 0-50-100-200-400-1000 ppm by AquaPhoenix

100 strips per container.

CC-0004-CO Corrosion Coupons: Copper, Alloy CDA122 by AquaPhoenix

3" long × 1/2" wide × 1/16" thick. 3/16" hole 1/4" from end.

2745250 Test Strips: Hardness, Total as CaCO3, 0-425 ppm by AquaPhoenix

Water hardness is caused almost entirely by calcium and magnesium ions. Other di- and trivalent metals have a similar effect, but usually are not present in high enough concentration in potable waters to cause problems. Hardness increases soap consumption in laundries and causes scale in boilers. Contains 50 tests.

• Easy to use, disposable, and inexpensive
• A great way to obtain quick, quantitative answers in the field or in the lab

*mg/L unless otherwise noted, ppb = μg/L, ppm = mg/L.; gpg = grains per gallon; 1 gpg = 17.1 mg/L or 17.1 ppm. 1EPA-accepted for wastewater. Check with your regulatory agency.

PT4000-P Potassium Thiocyanate, 0.1N, 500mL by AquaPhoenix

Specifications

• Packaging Type: Poly
• Size: 500 mL

CA3002-P Citric Acid Solution, 500mL by AquaPhoenix

• For Chlorine Dioxide Test Kit

Specifications

• Packaging Type: Poly
• Size: 500mL

SH6400-P Sodium Hydroxide, 50% w/w, 500mL by AquaPhoenix

• Sodium Hydroxide Solution/UN1824

Specifications

• Concentration: 50% w/v
• Packaging Type: Poly
• Size: 500 mL

SH6175-P Sodium Hydroxide, 0.05N, 500mL by AquaPhoenix

• Traceable to NIST

Specifications

• Concentration: 0.05N
• Packaging Type: Poly
• Size: 500 mL

SN3340-Q Silver Nitrate, 0.0141N, 1L by AquaPhoenix

• APHA for Chloride, 4500-B
• Traceable to NIST

Specifications

• Concentration: 0.0141N
• Packaging Type: Poly
• Size: 1.00 L

ST5025-Q Starch Indicator Solution, 2% w/v, 1L by AquaPhoenix

• APHA for DO, 4500-C, D

Specifications

• Concentration: 2% w/v
• Packaging Type: Poly
• Size: 1.00 L

DW4000-Q Deionized Water, ACS Grade, 1L by AquaPhoenix

• Type II equivalent

Specifications

• Packaging Type: Poly
• Size: 1.00 L

SH6310-Q Sodium Hydroxide, 6.0N, 1L by AquaPhoenix

• Traceable to NIST
• Sodium Hydroxide Solution/UN1824

Specifications

• Concentration: 6.0N
• Packaging Type: Poly
• Size: 1.00 L

ED2001-Q EDTA Titrant, 0.01M, 1L by AquaPhoenix

• APHA for Hardness, 2340-C
• Traceable to NIST
• 1 mL = 20ppm as CaCO3 / 50mL

Specifications

• Packaging Type: Poly
• Size: 1.00 L

FE3025-P Ferric Chloride, 0.025% w/v, 500mL by AquaPhoenix

• APHA for BOD, 5210-B

Specifications

• Packaging Type: Glass
• Size: 500 mL
• Concentration: 0.025% w/v

CS1500-P Conductivity Standard, 1500 μS/cm, 500mL by AquaPhoenix

• Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 500 mL

PH6700-P Phosphoric Acid, 10% v/v, 500mL by AquaPhoenix

• APHA for Chlorine, 4500-C Phosphoric
• Acid/UN1805

Specifications

• Packaging Type: Poly
• Size: 500 mL
• Concentration: 10% v/v

IP1005-P Isopropanol (Isopropyl Alcohol), ACS, 500mL by AquaPhoenix

• CAS No. 67-63-0
• CH3CH(OH)CH3 FW=60.10
• Isopropanol/UN 1219

Specifications

• Grade: ACS
• Packaging Type: Poly
• Size: 500 mL

BU1245-P Buffer, pH 12.45, 500mL by AquaPhoenix

• ± 0.01 at 25°C

pH Buffer should be used regularly, typically every day the meter is used to calibrate your pH meters. Pour buffer into a clean separate container and never return used or unused buffer back into the container. Always keep tightly capped and adhere to the expiration date which is printed on the label.

Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 500 mL
• pH Value: 12.45

481028 Test Strips: Chlorine Dioxide, 0 - 1.6 ppm by AquaPhoenix

Convenient and simple way of testing chlorine dioxide levels in sanitized water.
0-1.6ppm, 50 strips

Increments of 0.1, 0.2, 0.4, 0.6, 0.8, 1, 1.2, 1.4, 1.6

HA6310-P Hydrochloric Acid, 10% v/v (1:9), 500mL by AquaPhoenix

• Hydrochloric Acid Solution/UN1789

Specifications

• Packaging Type: Poly
• Size: 500 mL
• Concentration: 10% v/v

BU5918-Q Buffer, pH 9.18, 1L by AquaPhoenix

• ± 0.02 at 25°C

pH Buffer should be used regularly, typically every day the meter is used to calibrate your pH meters. Pour buffer into a clean separate container and never return used or unused buffer back into the container. Always keep tightly capped and adhere to the expiration date which is printed on the label.

Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 1.00 L
• pH Value: 9.18