Test Products International, Test and Measurement

59-048-1M RG59/U, BNC Male to BNC Male, 48 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

IP060 Switchable Passive Oscilloscope Probe, 60MHz, 1.5M Cable Length by Test Products International

Selecting the correct oscilloscope probe ensures accuracy and can improve the performance of your test instrument. TPI offers a wide range of high quality oscilloscope probes designed to meet the most demanding applications.

The IP series monolithic probes have switchable attenuation and are available in 60 and 250MHz. These probes are ideal for technicians that need a basic oscilloscope probe.

The slimline design P and SP series probes are available in fixed or switchable attenuation. These series of probes are perfect for the technician needing additional features such as replaceable cable and interchangeable probe tip. The compensation adjustment for these probes is located in the BNC to eliminate noise pickup.

TPI also offers three models of high voltage differential probes all with high common mode rejection, wide bandwidth, and fast rise times. Differential probes enable the viewing of signals not referenced to earth ground and provide better performance than a matched pair of single ended oscilloscope probes when measuring these types of signals.

Several important factors must be taken into account when selecting the proper probe.

• The probe should have sufficient bandwidth and rise time for the test instrument and application. Choose a probe with at least an equal bandwidth as the scope it will be used with. For best performance a probe with twice the bandwidth as the scope should be selected
• For oscilloscope probes, the input capacitance of your oscilloscope should be within the compensation range specification of the probe. In addition, if your oscilloscope has readout function, select a probe with this capability
• For differential probes, make sure the maximum differential voltage is adequate for your application and the common mode rejection specification meets the requirements of the tests being performed.

Features

• Attenuation: Ratio of the output signal to the input signal. Attenuation should remain constant decreasing by 3dB only as the frequency increases to the maximum bandwidth.
• Bandwidth: The maximum -3dB frequency that can be expected.
• Cable Length: Length of the cable from the end of the probe to the end of the connector. It is important to use a probe with just enough cable length for your needs. Long cables increase the capacitance and propagation delay of the probe.
• Compensation Range: The range a probe can be compensated to match the input capacitance of the test equipment it is being used with.
• IEC 1010: Probes with the IEC 1010 category rating have been designed for safety.
• Input Impedance: The total resistance and capacitance as measured at the tip of the probe. This specification is used to define the loading effect of a probe. At frequencies under 1MHz the input resistance of the probe will have the most influence. At higher frequencies the input capacitance will have the most influence.
• Max Input Voltage: The maximum voltage the probe can be used at.
• Max Differential Voltage: The maximum differential voltage that can be measured by a differential probe
• Readout: Probes with this capability are compatible with readout function oscilloscopes that automatically detect and display the attenuation factor of the probe.
• Rise Time: The time required for the leading edge of a pulse to rise from 10% to 90% of its final value.
• CMRR: Common Mode Rejection Ratio. A measure of a differential probes ability to reject any signals common to both test points in a differential measurement

Applications

• Use TPI Probes with Bench Top, Portable, Analog, and Oscilloscopes
• Logic signal and waveform tests
• Measure voice / data signals
• Analyze power quality
• Test motor control circuits

Markets

• Electronic
• Communication
• Commercial
• Industrial

Package Includes: Nano-Clip only

620 Dual Input Differential Manometer by Test Products International

Dual Differential Input Manometer with ±80 inH2O range and 0.01 in H2O resolution. Auto power off, Backlight display, Zero function, Trim mode to stabilize readings.

The TPI 600 series is a hand held range of pressure meters and can be summarized as follows.

• TPI 610 Single Input - 4 Function - single unit of pressure
• TPI 615 Single Input - 7 Function - 7 units of pressure
• TPI 620 Dual Input differential 4 Function single unit of pressure
• TPI 625 Dual Input differential 7 Function 7 units of pressure

All these models measure over the range of -40.0 to +120.0 mbar. Each unit has increased resolution of 0.01 mbar and automatically auto-ranges at + 19.00 mbar to 0.1 mbar resolution. Each model is supplied complete with carry pouch, battery and instruction manual.

Features:

• Differential input with ± 80" H2O range
• Display - 4 digit with backlight
• Smooth - Stabilizes display when measuring fluctuating pressures
• Auto Off: Conserve battery power

Standard Accessories (Included):

• 9V Alkaline battery (A009A)
• Soft Pouch (A600)
• Silicone Tube with 1/4" barbed 1/8" NPT fitting

739A Gas Leak Detector by Test Products International

Designed to provide personal protection from potential hazardous conditions and help find the source of combustible gases fast!

Features

• Internal Pump
• Water/Dust Filter
• Push Button Operation
• Field Calibration
• Date/Time Display
• Calibration Alert
• Operation Memory
• Calibration Memory
• Infrared Download
• Audible/Visual Alarms
• Backlit LCD
• Programmable Auto Shut Off

Applications

• Gas Leak Survey/Investigations
• Confined Space Monitoring
• Gas Emergency Investigations
• Vessel Testing

Partial List of Users:

• Utilities
• Maintenance
• Fire Departments
• Safety Inspectors
• Home Inspectors
• Water/Sewer

Departments

• Heating Contractors
• Utility Contractors
• Industrial Plants
• Propane Marketers

706 High CO Analyzer by Test Products International

Measure up to 99,999 ppm with the TPI 706 tests forklift exhaust gases for the presence and location of carbon monoxide leaks. This instrument fits comfortably in your hand and operates with just the push of a button.

The 706 is an advanced state-of-the-art carbon monoxide (CO) gas analyzer designed to provide part per million readings from 0- 10,000 ppm. The 706 is capable of performing ambient as well as flue gas checks with its hot air probe and internal pump.

The 706 is utilizes an advanced long life electrochemical sensor that can be field calibrated and has a low replacement cost.

Features include IR printer port to print hard copy of data, 10 storage locations, Flow block indication, peak reading for test period as well as date and time.

Features

• Pump driven for fast response
• Store function to save up to 50 readings
• Will not shut off if 15 ppm CO is present for increased safety
• Push on fittings for fast and easy use
• Optional A740 IR printer available for hard copies of test results
• Large easy to read backlit display

Applications

• Check forklift exhaust gases for the presence and location of carbon monoxide

Quick And Simple Set Up

All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selection during start up enable tests to be performed quickly without requiring extra set-up time after initial startup. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need toperform fuel selection every time the analyzer is turned on.

• Range: 0 ~ 9,999ppm <10,000ppm: 1.000 ~ 9.999%
• 1 ppm sensitivity
• Pump driven
• Auto zero

9070 Smart Vibration Meter by Test Products International

Vibration analysis at the touch of a button. Analyze and Interprets readings; incredible performance at an unbelievably low price. Overall machine and bearing conditions: vibration values are displayed with color coded alarm levels for ISO values and Bearing Damage (BDU).

Benefits:

• ISO Built-in Alarms
• Easily identify bearing problems with BDU Reading
• Easily identify problems with built in band filters: 1X (unbalance), 2X (misalignment), 3X (looseness)
• 800 line FFT (spectrum)
• Ruggedized IP67 case
• 3-year Limited Warranty

Features:

• Full Color OLED Display
• Built-in accelerometer with stinger. Optional long stinger and magnetic mount available

Applications:

• Commercial / Industrial HVAC
• Food Processing
• Manufacturers
• Mining
• Packaging
• Petrochemical
• Pulp and Paper
• Power Plants
• Utilities
• Automotive

HXG-3 Combustible Gas Leak Detector by Test Products International

The HXG-3 offers 10ppm sensitivity to detect combustible gasses. Easily operated with new patent pending electronic tick control, leaks are pinpointed using the audio and visual indicators. Two line backlit LCD displays gas leaks in ppm and %LEL simultaneously.

Pinpoint Leaks

Leaks can easily be pinpointed by using an audible tick rate. The sensor is located at the end of a flexible gooseneck to easily reach areas where leaks may be suspected.

Data Save

A Data Save feature allows you to save data during any investigation.

Features

• Combustible Gas Leak Detector capable of displaying ppm or %LEL (Lower Explosive Limit).
• UL 913 intrinsic safety rating
• 10 ppm sensitivity (methane)
• Instant response
• Electronic tick rate control
• Settable alarm
• Visual and audible leak indication
• 16'' gooseneck
• Hard carrying case
• Displays LEL and PPM
• Infrared Downloading
• Long-life, Low-Cost Sensor
• Simple Calibration

Applications

• Confined Space Monitoring
• Vessel Testing
• Manhole Entry
• Vault Entry
• Leak Detection
• Leak Pinpointing
• Pipeline Purging

Partial List of Industries:

• Natural Gas Companies
• Propane Suppliers
• Electric Companies
• Safety Engineers
• Fire and Police
• Emergency Vehicles
• Appliance Repair
• Plant Maintenance
• Plumbing Contractors
• Marine Operations
• Heating and Air Conditioning
• Municipalities
• Mobile Home Parks
• Apartment Buildings

326 Calibratable Water Resistant Digital Pocket Thermometer with Needle Tip by Test Products International

TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All "C" Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F!

Features

• Field calibrateable to ±2°F
• Easy-to-read LCD
• Data Hold for hard to reach areas
• Penetration tip
• Auto off
• 3.1 mm stem for fast response
• 4.9 inch stem for insertion in liquids and semi-solids
• IP Rating IP67
• 3-year limited warranty

Application

• Ambient air
• Calibrate thermostats
• Vents
• Compressor heads
• Registers
• Grill and surface temperatures
• Serving temperatures

716 Flue Gas Analyzer by Test Products International

The TPI Model 716 Flue Gas Analyzer is a state of the art, easy to use analyzer designed not only to display and calculate the required readings from a flue but also to cover most of the other measurements associated with combustion.

Features

Using TPI analyzers to determine combustion efficiency at the time of equipment set up minimizes call backs and can be used to verify to the home owner the value of service work by showing the increase in equipment efficiency after work is performed. Efficiency calculation can also be used to generate business by demonstrating the need to improve the efficiency of equipment or to show the benefit of purchasing new equipment with higher efficiency.

• Built-in differential manometer with 0.001 H2O resolution
• Calculates combustion efficiency
• Data Logging with time and date stamp
• Will not shut off if 15 ppm CO is present for increased safety
• Communicate to a PC via the USB interface
• Optional A740 IR printer available for hard copies of test results
• Built-in differential thermometer
• Push on fittings for fast and easy use
• Optional Bluetooth interface

Applications

• Tuning of residential and furnaces and domestic boilers
• Ambient and stack testing for CO
• CO safety measurements in and around combustion sources
• Temperature checking, including superheat and hydronic differential temperatures
• Dual input differential manometer with 3 selectable units of measure: kPa, mBar, inH20

Quick And Simple Set Up

All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selectionduring start up enable tests to be performed quickly without requiring extra set-up time after initial startup. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need toperform fuel selection every time the analyzer is turned on.

The TPI 716 Flue Gas Analyzer comes complete with the following standard accessories:

• TPI 716 Analyzer
• Combustible Gase Leak Probe (A806)
• Rubber Boot (A765) 1 each installed on analyzer
• Soft Carrying Case (A768) - 1 each
• Flue Sampling Probe (A770) - 1 each
• In-Line Filter / Water Trap installed on Flue probe (A795) - 1 each
• Disc water filter installed in water trap (A794W) - 1 each
• Spare In-Line Filter - 1 each (A794F is a package of 5 filters)
• Temperature Probe (GK11M) - 1 each
• Battery Charger (A766) - 1 each
• Mini Pump Protection Filter Assembly (A763) - 1 each
• Exhaust Spigot Removable (A764) - 1 each
• Pressure Tubing (A774) - 1 each 6 piece
• Static Pressure Tips (A776) - 2 each
• 1/4" barbed to 1/8" NPT fitting (A603) - 2 each
• Gas Valve Adapter (A611) - 1 each
• Adapter Tubing (A791) - 1 each 4" piece
• Instruction Manual

The TPI 716 Flue Gas Analyzer has the following options available:

• A807 PC Software and cable for communication to a PC.
• A740 infrared printer (Included with 716A740)

58-120-1M RG58/U, BNC Male to BNC Male, 10 Feet by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

58-300-1M RG58/U, BNC Male to BNC Male, 25 Feet by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

HXG-2 Combustible Gas Leak Detector by Test Products International

As lightweight and portable as it is sensitive, the HXG2 helps you pinpoint the smallest leaks quickly and accurately. Its calibrated alarm will indicate dangerous concentrations of combustible gases. Use with Hetkit and AGA approved protocol to test for cracked heat exchanges

Features

• Combustible Gas Leak Detector capable of displaying ppm or %LEL (Lower Explosive Limit).
• UL 913 intrinsic safety rating
• Calibrated to NIS traceable standards
• Instant response
• 10 ppm sensitivity
• Adjustable tic rate
• Settable alarm
• Visual and audible leak indication
• 16'' gooseneck
• Soft Carrying Pouch

100 EZ One Button Operation DMM by Test Products International

The new TPI 100 automatically switches between AC and DC Voltage as well as resistance measurements. No more guessing what range to switch your meter to. The TPI 100 does it automatically.

Features:

• Automatically switches between ACV, DCV, and ohms (resistance). Benefit: Simple to use. Meter selects function and range, just connect the leads to the device under test.
• Single button operation. Benefit: Easy to use. Enables users with limited knowledge to perform tests safely.
• 0 to 600 volts AC and DC Benefit: Enough range to safely perform measurements
• 10 MΩ internal impedance. Benefit: High impedance prevents inaccurate reading caused by circuit loading.
• Auto power off. Benefit: Increases battery life by turning off the multimeter when not in use.
• 4,000 count display
• Up to 40MΩ
• cULus 61010-1
• CAT II - 1000V, CAT III - 600V
• Includes Test Lead Set, Batteries and Protective Rubber Boot
• 3 Year Limited Warranty

Applications:

• Measure line and control circuit voltages
• Measure resistance of motor windings, transformers, and solenoids
• Make general AC and DC voltage and resistance measurements
• Measure the resistance of elements and electric heater cores
• Test continuity of wiring
• Verify voltage at breakers and outlets
• Use as a back-up meter in your tool box

The 100 comes complete with the following accessories:

• 100 Instrument
• Rubber Boot
• Test Lead Set
• 1.5V Battery
• Instruction Manual

1008A Indoor Air Quality Meter by Test Products International

Measure and display carbon dioxide (CO2) and temperature. The TPI 1008A Indoor Air Quality (IAQ) Meter is a state of the art, easy to use tester designed to provide you with the necessary measurements to monitor and make adjustments to air handling devices.

The 1008A IAQ meter uses state of the art sensors to measure carbon dioxide (CO2), and temperature. The instrument is ruggedly constructed and comes with a 3 Year unit and 2 Year sensor Guarantee.

Features

• Measure carbon dioxide (CO2) and temperature simultaneously
• Record and display min, max & average
• Store up to 50 readings in memory in 1, 2, 3, 5, 10, 20, 30, 40, 50, 60 min intervals
• Print via I/R to optional printer (Model A740)

Applications

• Check ambient CO2 levels in work and living spaces
• Ambient air temperature

Standard Accessories

• TPI 1008 Instrument
• Protective Rubber Boot
• Soft Carrying Case (A921)
• USB Cable & Software (A803)
• Instruction Manual

Optional Accessories

• Power adapter / Battery eliminator (A804)
• Magnetic strap kit to hang meter (A127)
• Boot hook to hang meter (A103)
• Replacement Software only (A802)
• Replacement USB cable only (A801)

1010A Indoor Air Quality Meter by Test Products International

Measure ambient CO2, temperature, relative humidity, dew point, wet bulb, CO, and calculate percentage outside air. The TPI 1010A Indoor Air Quality (IAQ) Meter is a state of the art, easy to use tester designed to provide you with the necessary measurements to monitor and make adjustments to air handling devices.

The 1010A IAQ meter uses state of the art sensors to measure humidity, carbon dioxide (CO2), and temperature. The instrument is ruggedly constructed and comes with a 3 Year unit and 2 Year sensor Guarantee.

Features

• Calculate percent outside air to maintain acceptable CO2 levels in buildings and work spaces
• Measure and display Carbon Dioxide (CO2) and Carbon Monoxide
• Measure ambient air temperature
• Measure relative humidity, dew point and wet bulb
• Log up to 10,000 readings in 1 second to 1 hour intervals
• Download to a computer using the A368 USB cable
• Print via I/R to optional printer (Model A740)

Applications

• Check ambient CO and CO2 levels in work and living spaces
• Monitor results of air control systems
• Ambient air temperature and humidity
• Test dew point and wet bulb humidity

Standard Accessories

• TPI 1010A Instrument
• Protective Rubber Boot (A800)
• Soft Carrying Case (A921)
• USB Cable & Software (A803)
• Instruction Manual

Optional Accessories

• Power adapter / Battery eliminator (A804)
• Magnetic strap kit to hang meter (A127)
• Boot hook to hang meter (A103)
• Replacement Software only (A802)
• Replacement USB cable only (A801)

1020 Handheld Particle Counter by Test Products International

From filter testing to IAQ monitoring the 1020 single channel particle counter is used to determine airborne particle concentrations. The 3,000,000 particles per cubic foot concentration range and selectable particle size offers the versatility required for a wide range of applications.

The TPI 1020 is designed to be a small, easy to use and completely portable hand-held particle counter that can provide fast and accurate measurement of particulate contamination in particles per cubic foot (or liter). The TPI 1020 has 5 selectable size ranges of 0.3, 0.5, 1, 2, and 5 micron.

The TPI 1020 contains a laser diode based sensor, Lithium Ion battery pack, vacuum pump, microprocessor electronics, LCD display and user input keys all in one small package. The accuracy of the TPI 1020 is certified according to ASTM and JIS standards and comparable to larger more expensive bench top particle counters. The fast 3-second response of the TPI 1020 makes it especially useful for troubleshooting contamination problems and tracing contamination leaks to the source.

The laser diode based sensor inside the TPI 1020 utilizes a specially designed elliptical mirror for high light collection efficiency and improved signal to noise. Precision optics collimate the laser beam into a thin, very intense beam resulting in increased signal and a high concentration limit of 3,000,000 particles per cubic foot. This high concentration limit allows the TPI 1020 to be used for indoor and outdoor aerosol particulate measurement.

Small Size. Big Performance:

The handheld TPI 1020 is a portable particle counter that counts particles down to 0.3 microns-giving you portability and reliability at the lowest price in the industry

Completely Self-Contained-Selectable Particle Sizes:

Don't let the size fool you-the TPI 1020 is completely self-contained with its own internal battery and sample pump, and is programmable, allowing you to choose your particle size of interest from five sizes: 0.3, 0.5, 1.0, 2.0, or 5.0 microns

Fast Sampling:

Unlike other counters that can take up to a minute to deliver results, the TPI 1020 starts delivering volumetric concentration results in about 3 seconds! This facilitates quick multi-site sampling, tracing particle sources and site particle trending.

Simple Operation:

Only two front-panel buttons control the size channels and sample cycle. Power is controlled by the Start / Stop button.

Battery or AC Powered:

The self-contained battery pack powers the unit for 30 hours of typical intermittent operation, and for up to 12 hours of continuous use. The included AC charger / adapter operates the counter, even when the battery pack is discharged, and recharges the depleted battery in 2.5 hours.

Applications:

• Airborne contamination monitoring & testing
• Clean rooms
• Emissions sourcing
• Filter testing
• IAQ monitoring & testing

120 Compact, Manual Ranging, Basic DCV 0.5% Accuracy DMM by Test Products International

When using the Model 120, press the DATA-H button at any time on any function or range to freeze the reading on the LCD display. This function is very useful when measuring in locations where the display is difficult to read.

Features:

• Safety: Meets CE and IEC 1010 requirements. UL Listed.
• Large LCD: Easy to read at all angles and the majority of lighting levels.
• Data Hold: Freeze readings on the display.
• Rubber Boot: Added protection when the instrument is dropped. (120NB does not include boot.)
• Versatile: Use accessories like a carbon monoxide attachment to expand the capabilities of the 120.
• 2,000 count display
• 0 to 600 volts AC and DC
• 0 to 2,000 ohms
• Audible continuity
• 10 MOHM internal impedance
• 0.5 % DCV basic accuracy
• cULus 61010-1
• CAT II - 1000V, CAT III - 600V

HVAC/R Applications:

• Line voltage
• Control circuit voltage
• Heating element resistance (continuity)
• Compressor winding resistance
• Contactor and relay coil resistance
• Continuity of wiring

Electrical Applications:

• Measure line voltage
• Continuity of circuit breakers
• Voltage of direct drive DC motors.

The 120 comes complete with the following accessories:

• 120 Instrument
• Rubber Boot
• Test Lead Set
• 9V Battery
• Instruction Manual

TPI-1200 BNC Attenuator Kit by Test Products International

Includes

• 805-53-000 BNC Shunt
• 120082 Individual BNC Attenuator, 3 dB 1.0 Watt
• 120083 Individual BNC Attenuator, 6 dB 1.0 Watt
• 120085 Individual BNC Attenuator, 20 dB 0.5 Watt
• 105-52-000 BNC Termination

120082 Individual BNC Attenuator, 3 dB 1.0 Watt by Test Products International

Features

• Increase the input range of an oscilloscope.
• Reduce the output level of fixed amplitude signal sources.
• Connect low impedance sources to instruments with high-impedance inputs.