Test Products International, Test and Measurement

1020 Handheld Particle Counter by Test Products International

From filter testing to IAQ monitoring the 1020 single channel particle counter is used to determine airborne particle concentrations. The 3,000,000 particles per cubic foot concentration range and selectable particle size offers the versatility required for a wide range of applications.

The TPI 1020 is designed to be a small, easy to use and completely portable hand-held particle counter that can provide fast and accurate measurement of particulate contamination in particles per cubic foot (or liter). The TPI 1020 has 5 selectable size ranges of 0.3, 0.5, 1, 2, and 5 micron.

The TPI 1020 contains a laser diode based sensor, Lithium Ion battery pack, vacuum pump, microprocessor electronics, LCD display and user input keys all in one small package. The accuracy of the TPI 1020 is certified according to ASTM and JIS standards and comparable to larger more expensive bench top particle counters. The fast 3-second response of the TPI 1020 makes it especially useful for troubleshooting contamination problems and tracing contamination leaks to the source.

The laser diode based sensor inside the TPI 1020 utilizes a specially designed elliptical mirror for high light collection efficiency and improved signal to noise. Precision optics collimate the laser beam into a thin, very intense beam resulting in increased signal and a high concentration limit of 3,000,000 particles per cubic foot. This high concentration limit allows the TPI 1020 to be used for indoor and outdoor aerosol particulate measurement.

Small Size. Big Performance:

The handheld TPI 1020 is a portable particle counter that counts particles down to 0.3 microns-giving you portability and reliability at the lowest price in the industry

Completely Self-Contained-Selectable Particle Sizes:

Don't let the size fool you-the TPI 1020 is completely self-contained with its own internal battery and sample pump, and is programmable, allowing you to choose your particle size of interest from five sizes: 0.3, 0.5, 1.0, 2.0, or 5.0 microns

Fast Sampling:

Unlike other counters that can take up to a minute to deliver results, the TPI 1020 starts delivering volumetric concentration results in about 3 seconds! This facilitates quick multi-site sampling, tracing particle sources and site particle trending.

Simple Operation:

Only two front-panel buttons control the size channels and sample cycle. Power is controlled by the Start / Stop button.

Battery or AC Powered:

The self-contained battery pack powers the unit for 30 hours of typical intermittent operation, and for up to 12 hours of continuous use. The included AC charger / adapter operates the counter, even when the battery pack is discharged, and recharges the depleted battery in 2.5 hours.

Applications:

• Airborne contamination monitoring & testing
• Clean rooms
• Emissions sourcing
• Filter testing
• IAQ monitoring & testing

120 Compact, Manual Ranging, Basic DCV 0.5% Accuracy DMM by Test Products International

When using the Model 120, press the DATA-H button at any time on any function or range to freeze the reading on the LCD display. This function is very useful when measuring in locations where the display is difficult to read.

Features:

• Safety: Meets CE and IEC 1010 requirements. UL Listed.
• Large LCD: Easy to read at all angles and the majority of lighting levels.
• Data Hold: Freeze readings on the display.
• Rubber Boot: Added protection when the instrument is dropped. (120NB does not include boot.)
• Versatile: Use accessories like a carbon monoxide attachment to expand the capabilities of the 120.
• 2,000 count display
• 0 to 600 volts AC and DC
• 0 to 2,000 ohms
• Audible continuity
• 10 MOHM internal impedance
• 0.5 % DCV basic accuracy
• cULus 61010-1
• CAT II - 1000V, CAT III - 600V

HVAC/R Applications:

• Line voltage
• Control circuit voltage
• Heating element resistance (continuity)
• Compressor winding resistance
• Contactor and relay coil resistance
• Continuity of wiring

Electrical Applications:

• Measure line voltage
• Continuity of circuit breakers
• Voltage of direct drive DC motors.

The 120 comes complete with the following accessories:

• 120 Instrument
• Rubber Boot
• Test Lead Set
• 9V Battery
• Instruction Manual

TPI-1200 BNC Attenuator Kit by Test Products International

Includes

• 805-53-000 BNC Shunt
• 120082 Individual BNC Attenuator, 3 dB 1.0 Watt
• 120083 Individual BNC Attenuator, 6 dB 1.0 Watt
• 120085 Individual BNC Attenuator, 20 dB 0.5 Watt
• 105-52-000 BNC Termination

120082 Individual BNC Attenuator, 3 dB 1.0 Watt by Test Products International

Features

• Increase the input range of an oscilloscope.
• Reduce the output level of fixed amplitude signal sources.
• Connect low impedance sources to instruments with high-impedance inputs.

120083 Individual BNC Attenuator, 6 dB 1.0 Watt by Test Products International

Features

• Increase the input range of an oscilloscope.
• Reduce the output level of fixed amplitude signal sources.
• Connect low impedance sources to instruments with high-impedance inputs.

120084 Individual BNC Attenuator, 10 dB 0.5 Watt by Test Products International

Features

• Increase the input range of an oscilloscope.
• Reduce the output level of fixed amplitude signal sources.
• Connect low impedance sources to instruments with high-impedance inputs.

120085 Individual BNC Attenuator, 20 dB 0.5 Watt by Test Products International

Features

• Increase the input range of an oscilloscope.
• Reduce the output level of fixed amplitude signal sources.
• Connect low impedance sources to instruments with high-impedance inputs.

120085 BNC Attenuator Kit by Test Products International

Features

• Increase the input range of an oscilloscope.
• Reduce the output level of fixed amplitude signal sources.
• Connect low impedance sources to instruments with high-impedance inputs.

Includes

• 120082 Individual BNC Attenuator, 3 dB 1.0 Watt
• 120083 Individual BNC Attenuator, 6 dB 1.0 Watt
• 120084 Individual BNC Attenuator, 10 dB 0.5 Watt
• 120085 Individual BNC Attenuator, 20 dB 0.5 Watt

122 Compact DMM with Adapter Range for Optional Accessories, 0.5% DCV Basic Accuracy by Test Products International

When using the Model 122, press the DATA-H button at any time on any function or range to freeze the reading on the LCD display. This function is very useful when measuring in locations where the display is difficult to read.

Features:

• Safety: Meets CE and IEC 1010 requirements. UL Listed.
• Large LCD: Easy to read at all angles and the majority of lighting levels.
• Data Hold: Freeze readings on the display.
• Rubber Boot: Added protection when the instrument is dropped. (120NB does not include boot.)
• Versatile: Use accessories like a carbon monoxide attachment to expand the capabilities of the 122.
• 2,000 mvDC (2 DCV) adapter range
• 2,000 count display
• 0 to 600 volts AC and DC
• 0 to 2,000 ohms
• Audible continuity
• 10 MOHM internal impedance
• 0.5 % DCV basic accuracy
• cULus 61010-1
• CAT II - 1000V, CAT III - 600V

HVAC/R Applications:

• Line voltage
• Control circuit voltage
• Heating element resistance (continuity)
• Compressor winding resistance
• Contactor and relay coil resistance
• Continuity of wiring

Electrical Applications:

• Measure line voltage
• Continuity of circuit breakers
• Voltage of direct drive DC motors.

The 120 comes complete with the following accessories:

• 122 Instrument
• Rubber Boot
• Test Lead Set
• 9V Battery
• Instruction Manual

126 Compact Autoranging DMM with 0.3% DCV Basic Accuracy and 400mA AC/DC Range by Test Products International

The 126 is a hand-held autoranging DMM. The 126 measures ACV, DCV, ACA, DCA, Resistance, Diodes and Continuity.

Features:

• REC: Records Min/Max readings during specified measurement intervals.
• AC/DC:Toggles between AC/DC volts and Amps.
• Data Hold: Holds the reading on the display for easy viewing.
• Auto Off: Preserves battery life. LCD shows oFF when in this mode. Automatically powers down after 30 minutes of inactivity.
• Agency Approval: Meets CE and IEC 1010 requirements.
• 4,000 count display
• 0.3% DCV basic accuracy
• 0 to 600 ACV; max resolution 1mV
• 0 to 40MΩ; max resolution 0.1Ω
• Audible continuity
• 0 to 400 mA amps AC/DC; max resolution 0.01mA
• Autoranging
• Min/Max
• Data Hold
• cULus 61010-1
• CAT II - 1000V, CAT III - 600V

Applications:

• Thermocouples in furnaces or gas applications
• Thermocouples in furnaces of gas applications. DC Controlled circuits
• Heat anticipator current in thermostats
• Line voltage
• Control circuit voltage
• Flame safeguard control current
• Heating element resistance (continuity)
• Compressor winding resistance
• Contactor and relay coil resistance
• Continuity of wiring
• Temperature with optional temperature adapter

The 126 comes complete with the following accessories:

• 126 Instrument
• Rubber Boot
• Test Lead Set
• Battery
• Instruction Manual