$1000 - $2000, Test and Measurement

SCT-108.003.15 SCT BEN-DO-1 Benchtop DO/Temperature Meter by ScichemTech

SCT benchtop DO temperature meter with automatic salinity compensation and automatic air pressure compensation.

Equipped with intelligent stirrer, flexible electrode holder and operation instruction.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• DO electrode
• DO electrode inner solution
• Membrane cap (for DO electrode use)
• Cathode polishing paper
• 9V power adapter (for meter use)
• 6V power adapter (for stirrer use)
• RS-232 communication cable
• Communication software CD
• Stirring bead
• AA battery
• Operation manual
• Packing list

Features:

• SCT benchtop meter is designed to measure dissolved oxygen and temperature.
• SCT DO measurement has ATC, automatic salinity compensation and automatic air pressure compensation.
• The new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make do measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.
• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Electrode adopts combination diaphragm cap, assembling sensitive membrane with diaphragm cap, which very convenient to replace the sensitive membrane. The user only needs to screw the new membrane cap on the electrode.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.16 SCT BEN-SOD-1 Benchtop Sodium Ion Meter by ScichemTech

SCT benchtop sodium ion meter is suitable for measuring low sodium ion concentration in the water.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• Stir bead
• Sodium ion electrode
• Reference electrode
• Temperature electrode
• pNA 1.00 standard solution
• 10^-1 mol/l CSCL reference solution
• 9V power adapter
• 16V power adapter
• AA battery
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose Etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Sodium electrode range.
• Sodium ion electrode, reference electrode and temperature electrode.
• Can switch 4 kinds of concentration unit: px, mol/l, mg/l and ppm
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets : ISO9001 & CE standards.

SCT-108.003.17 SCT-BEN-CAL-01 Benchtop Calcium Ion Concentration Meter by ScichemTech

SCT benchtop calcium ion meter widely used in detecting the concentration of calcium ions in water.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• Stir bead
• Calcium ion combination electrode
• Calcium electrode inner solution
• Calcium electrode measuring head
• Tool for filling calcium electrode inner solution
• Temperature electrode
• PCA 1.00 standard solution
• 9v power adapter
• 6v power adapter
• Battery
• RS-232 communication cable
• MP518 communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features upto automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Calcium electrode range.
• Calcium ion combination electrode and temperature electrode.
• Can switch 4 kinds of concentration unit: px, mol/l, mg/l and ppm
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards

SCT-108.003.18 SCT-BEN-FLU-1 Benchtop Fluoride Ion Concentration Meter by ScichemTech

SCT benchtop fluoride ion meter suitable for detecting fluoride ion in the water samples.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• Stir bead
• Fluoride ion electrode
• Reference electrode
• Temperature electrode
• PF1.00 standard solution
• 9V power adapter
• 6V power adapter
• Battery
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• There are three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Electrode range.
• Fluoride ion electrode, reference electrode and temperature electrode.
• Can switch 4 kinds of concentration unit: px, mol/l, mg/l and ppm
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.004.01 SCT SEDIMENT-1 Portable Manual Silt Density Index Meter by ScichemTech

Includes:

• ASTM instructions for measuring silt density index
• Filter Holder
• Pressure Gauge
• Pressure Regulator
• Ball Valve
• Graduated Cylinder
• Thermometer
• Tubing
• Filter Tweezers

Features:

• SCT SDI METER is completely assembled in a portable COMPACT case ready for on-site testing
• Includes ASTM instructions for measuring silt density index
• Feed pressure required: Min 40 psi
• Assembled with Filter Holder, Pressure Gauge, Pressure Regulator Ball Valve, Graduated Cylinder, Thermometer, Tubing, Filter Tweezers.
• Filters not included

SCT-108.005.26 SCT-CL-MAXI Chlorine Controller by ScichemTech

Includes:

• Chlorine sensor
• Fixation clamps
• Instruction manual

Features:

• SCT-CL (Chlorine) MAXI CONTROLLERS are designed with creativeness to get the elegance and produced with proper quality, and meets the specifications for the Water related applications with high level performance
• SCT-CL (Chlorine) MAXI controllers are an industrial instrument used for online analysis and monitoring.
• SCT-CL (Chlorine) MAXI CONTROLLERS are made in a attractive pleasant colour with a Large and Clear blue white LCD Display
• SCT-CL (Chlorine) MAXI CONTROLLERS has Microprocessor based controllers, which gives stable and accurate readings.
• SCT-CL (Chlorine) MAXI CONTROLLERS has Low power consumption and produces less internal heat.
• SCT-CL (Chlorine) MAXI CONTROLLER S has an isolated 4-20 mA current output
• SCT-CL (Chlorine) MAXI CONTROLLERS has a RS 485 communication interface
• SCT-CL (Chlorine) MAXI CONTROLLERS has an automated sensor cleaning control output.
• SCT-CL (Chlorine) MAXI CONTROLLERS has diaphragm polagraphic electrodes. The electrode consists of cathode, anode, electrolyte and a layer of gas permeability diaphragm on the cathode. The measured residual chlorine diffuse to the cathode through diaphragm. The proper polarization voltage between the cathode and the anode, which can deoxidize the residual chlorine on the cathode. These chemical actions proportional to the residual chlorine which is in the measured medium. which gives reliable measurements.
• SCT-CL-(Chlorine) MAXI CONTROLLERS are panel mount type of controllers.
• SCT-CL-(Chlorine) MAXI CONTROLLERS proved to work continuously in any harsh environmental conditions for the In line measurement and control of accurate CHLORINE value.
• SCT-CL-(Chlorine) MAXI CONTROLLERS has a major advantage that, no reagents are used. It has the direct measurement and readings

SCT-108.005.31 SCT-DO-MAXI Dissolved Oxygen Controller by ScichemTech

Includes:

• DO sensor
• Fixation clamps
• Instruction manual

Features:

• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are designed with creativeness to get the elegance and produced with proper quality, and meets the specifications for the Water related applications with high level performance
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are an industrial instrument used for online analysis and monitoring.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are made in a attractive pleasant colour with a Large and Clear blue white LCD Display
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are Microprocessor based controllers, which gives stable and accurate readings.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS uses Low power consumption and produce less internal heat.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are has the polagraphic type DO electrode. This oxygen electrode is a diaphragm polarographic (clark) electrode. The conductibility electrolyte makes the polarization between cathode and anode. Between the cathode and the anode, the proper polarization voltage can deoxidize the O2 at the Cathode electrode. Cathode reaction: O2+ 2H2O +4e -- 4OH-, Anode reaction : 4AG +4Cl- -- 4AgCl + 4e. These chemical reactions produce the current which is proportional to the O2 in the test solution.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS has an isolated 4-20 mA current output
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are panel mount type of controllers.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS proved to work continuously in any harsh environmental conditions for the In line measurement and control of accurate CHLORINE value.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS has a major advantage that, no reagents are used. it has the direct measurement and readings

715 High CO Combustion Analyzer with Built-in Differential Thermometer, Differential Manometer, and NO Measurement & NOX Calculation by Test Products International

The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO₂ (nitrogen dioxide) and NOX (combination of NO and NO₂) to prevent cross sensitivity errors.

Use TPI analyzers to test flue gases in gas and oil fired equipment including high efficiency furnaces and condensing boilers. Measure CO, O₂, and stack temperature.

Determine combustion efficiency, CO₂, and CO air free. Some models include built-in differential manometer, combustible gas detection, PC communication, data logging, and can measure NO / NOX.

Use the optional A784 flow regulator to reduce the flow rate of the gas being sampled to measurable levels on high pressure systems such as gas compression engines. The A784 is included in the 715K3 kit.

Features

Using TPI analyzers to determine combustion efficiency at the time of equipment set up minimizes call backs and can be used to verify to the home owner the value of service work by showing the increase in equipment efficiency after work is performed. Efficiency calculation can also be used to generate business by demonstrating the need to improve the efficiency of equipment or to show the benefit of purchasing new equipment with higher efficiency.

Quick And Simple Set Up

All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selection during start up enable tests to be performed quickly without requiring extra set-up time after initial startup. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need toperform fuel selection every time the analyzer is turned on.

• Measure up to 9.999% CO
• Built-in differential thermometer
• Measure NO (Nitric Oxide), Calculate NOx
• Store function to save up to 10 readings
• Calculates combustion efficiency
• Pump driven for fast response
• Push on fittings for fast and easy use
• Large easy to read backlit display
• Will not shut off if 15 ppm CO is present for increased safety
• Four selectable fuels: Natural Gas, LPG, Light Oil, Heavy Oil
• Optional A740 IR printer available for hard copies of test results

Applications

• Tune combustion engines
• Test CO levels in industrial boilers
• Measure NO and calculate NOX

716A740 716 Flue Gas Analyzer Kit by Test Products International

Features

• Built-in differential manometer with 0.001 H2O resolution
• Calculates combustion efficiency
• Data Logging with time and date stamp
• Will not shut off if 15 ppm CO is present for increased safety
• Communicate to a PC via the USB interface
• Optional A740 IR printer available for hard copies of test results
• Built-in differential thermometer
• Push on fittings for fast and easy use
• Optional Bluetooth interface

A740 Features

• Easy to use
• Battery operated
• Self test facility
• Adjustable contrast
• Manual paper feed
• Maximum transmitting distance 16"(45cm)

Includes

• 716 Flue Gas Analyzer
• A740 IR Printer

735A Gas Leak Detector by Test Products International

Designed to quickly and accurately measure natural and propane gas leaks, as well as carbon monoxide concentrations.

Features

• Internal Pump
• Water/Dust Filter
• Push Button Operation
• Field Calibration
• Date/Time Display
• Calibration Alert
• Operation Memory
• Calibration Memory
• Infrared Download
• Audible/Visual Alarms
• Backlit LCD
• Programmable Auto Shut Off

Applications

• Gas Leak Survey/Investigations
• Confined Space Monitoring
• Gas Emergency Investigations
• Vessel Testing

Standard Accessories

• Carrying Pouch (A780)
• Instruction Manual
• Battery and Sensor (Installed and Calibrated)

737K1 Purge Probe Kit by Test Products International

Meets the requirements for latest NFPA 54 fuel gas purging requirements for large gas systems.

Measure combustible leaks, LEL and %volume

Provides personal protection from potential hazardous conditions and help find the source of combustible gases fast!

Features

• Internal Pump
• Water/Dust Filter
• Push Button Operation
• Field Calibration
• Date/Time Display
• Calibration Alert
• Operation Memory
• Calibration Memory
• Infrared Download
• Audible/Visual Alarms
• Backlit LCD
• Programmable Auto Shut Off

Applications

• Gas Leak Survey/Investigations
• Confined Space Monitoring
• Gas Emergency Investigations
• Vessel Testing

The 737K1 Purge Probe Kit includes the following:

• 737
• Carry pouch
• Instruction manual
• A758 purge probe
• Batteries
• Extra water/dirt filter trap

6381 Differential Pressure Transmitter with optional T/RH- standard housing metal by Testo

The differential pressure transmitter testo 6381 was developed specially for monitoring differential pressure in the measuring range from 10 Pa to 1000 hPa. In cleanroom technology, the maintenance of positive pressure prevents the entry of contaminated air. In addition to this, the flow velocity or the volume flow can be calculated from the measurement of the differential pressure in a Pitot tube. Thanks to an optional probe from the probe series 6610, the additional recording of humidity and temperature with one instrument is also possible.

The testo 6381 is particularly outstanding thanks to the automatioc zero-point adjustment which ensures high accuracy and long-term stability.

The integrated self-monitoring and early warning function also guarantees the operator high system availability.

• Measurement of differential pressure, flow velocity, volume flow; optional: humidity and temperature
• Automatic zero-point adjustment guarantees high, temperature-independent accuracy and long-term stability
• Low measurement range up to 10 Pa ensures very high precision at lowest pressures
• Ethernet, relay and analog outputs allow optimum integration into individual automation systems
• The P2A software for parameterization, adjustment and analysis saves time and costs in commissioning and maintenance
• Configurable alarm management with adjustable response delay and alarm acknowledgement

6383 Differential Pressure Panel Transmitter with optional T/RH - standard panel housing metal by Testo

The differential pressure transmitter testo 6383 was developed specially for monitoring low differential pressures in the measuring range from 10 Pa to 10 hPa. In cleanroom technology, the maintenance of positive pressure prevents the entry of contaminated air in critical zones. Thanks to an optional internal or external probe from the probe series 6610, the additional recording of humidity and temperature with one instrument is also possible.

The testo 6383 is particularly outstanding thanks to the automatic zero-point adjustment which ensures high accuracy and long-term stability.

The integrated self-monitoring and early warning function also guarantees the operator high system availability.

• Measurement of differential pressure; optional: humidity and temperature
• Flat housing allows flush surface integration in the cleanroom wall
• Ethernet, relay and analog outputs allow optimum integration into individual automation systems
• Self-monitoring of the transmitter and early warning function guarantee high system availability
• The P2A software for parameterization, adjustment and analysis saves time and costs in commissioning and maintenance
• Configurable alarm management with adjustable response delay and alarm acknowledgement

6681 Temperature & Humidity Transmitter by Testo

Industrial humidity measurement demands absolute professionalism. Not only in running the system, but also in the measuring technology used. The industrial humidity transmitter testo 6681, combined with the probe series testo 661x fulfils these high demands. The testo 6681 has a number of additional features, above and beyond the properties and benefits of a conventional transmitter, which will delight practitioners. This and other reasons make the

testo 6681 the first choice in drying technology, trace humidity and compressed air process technology, as well as in demanding air conditioning technology, e.g. in cleanrooms.

• Optimum adjustment concept thanks to adjustment of the entire signal chain incl. analog adjustment
• Profibus, Ethernet, relay and analog outputs allow optimum integration into individual automation systems
• Self-monitoring and early warning guarantee high system availability
• Calculation and presentation of all relevant humidity parameters
• P2A software for parameterization, adjustment and analysis saves time and costs in commissioning and maintenance
• Display with multi-language display
• Robust, easy-to-clean metal housing