$1000 - $2000, Test and Measurement, ScichemTech

SCT-108.002.11 SCT DEON pH/ORP/Conductivity/TDS/Salinity/Resistivity/DO/Temp Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combination electrode
• Plastic ORP combination electrode
• Plastic conductivity electrode
• DO electrode
z
• pH standard buffer solution
• 1413us/cm conductivity standard solution
• Membrane cap
• DO electrode inner solution
• Cathode polishing paper
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for pH, ORP, conductivity and dissolved oxygen measurements.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, self-diagnose information, automatic power-off and low voltage display.
• Multi-parameter meter, equipped with pH electrode, ORP electrode, conductivity electrode and dissolved oxygen electrode, automatic identification of electrode by meter.
• Automatic identification of 12 pH standard calibration solutions, three options of standard buffer solutions: Europe and America series & nist series
• Able to set pH measurement modes of high purity water and pure water with ammonia.
• Automatic identification of 7 conductivity standard calibration solutions, two options of standard calibration solutions: Europe and America series
• Adopt advanced conductivity measurement technology, use conductivity electrode of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.003.06 SCT BEN-pH-6 pH/Conductivity Benchtop Meter by ScichemTech

SCT benchtop pH/Conductivity meter is the most widely used pH and conductivity double parameter measurement meters.

Resolution pH 0.01/Conductivity 0.1.

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• Plastic conductivity electrode
• pH standard buffer solution 4.00, 7.00, 10.01 (50 ml)
• 1413 us/cm conductivity standard solution 50 ml
• 9v power adapter
• RS-232 communication cable
• Communication software disk
• Operation manual
• Packing list

Features:

• SCT benchtop meter is designed to measure conductivity, pH and ORP.
• The most widely used pH + conductivity double-parameter measurement meter.
• Meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize pH buffer solution. User can choose anyone from three series of standard buffer solutions: Europe & USA series, & NIST series
• Adopt advanced and original conductivity measurement technology, use 1pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Option to switch conductivity, TDS, salinity and resistivity.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.07 SCT BEN-pH-7 Precision GLP pH/Conductivity Meter by ScichemTech

SCT benchtop precision GLP pH/Conductivity meter is suitable for precision measurement research and quality control, resolution pH 0.001 and conductivity 0.5.

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• Glass pH combination electrode
• Temperature electrode
• Conductivity electrode
• pH standard buffer solution 4.00, 7.00, 10.01 (50 ml) 1413us/cm
• Conductivity standard solution 50ml
• 9V power adapter
• RS-232 communication cable
• Communication software disk
• Operation manual and packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 12 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series
• High purified water and ammonia added purified water pH measuring mode can be set up.
• With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
• Automatically recognize 8 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series
• Adopt advanced and original conductivity measurement technology, use 1pc of conductivity electrode (K=1) it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Automatically select conductivity measurement range, when measuring high pure water, equipment automatically enter into temperature compensation of nonlinear model.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.08 SCT BEN-ISE-1 Benchtop pH/ISE Meter by ScichemTech

SCT benchtop pH/ISE meter is the high precision pH + ISE double parameter measurement meter which is suitable for precision measurement research and quality control.

10 kinds of common ions can be selected in the ion concentration measuring mode user also can self defend other ions.

Can switch 4 kinds of concentration unit px, mol/l, mg/l and ppm.

Instrument resolution pH 0.001, ISE 0.01

Includes:

• Flexible electrode holder
• Intelligent stirrer
• pH/ATC three-in-one combination electrode
• Glass pH combination electrode
• Temperature electrode double salt bridge reference electrode
• pH standard buffer solution 50 ml
• 9V power adapter
• 6V power adapter
• Stirring bead
• Battery
• RS-232 communication cable
• Communication software disk
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 13 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series
• High purified water and ammonia added purified water pH measuring mode can be set up.
• With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
• There are 10 kinds of common ions can be selected in the ion concentration measuring mode, user also can self-define other ions.
• Can switch 4 kinds of concentration unit: px, mol/l, mg/l and ppm.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.09 SCT BEN-pH-8 Benchtop pH/DO Meter by ScichemTech

Sct benchtop pH/DO meter is the high precision pH/do double parameter measurement meter which is suitable for precision measurement.

DO measurement as ATC/automatic salinity compensation and automatic air pressure compensation.

Polaro graphic type oxygen electro, the polarization time is short, fast response and accurate measurement.

Instrument resolution pH 0.001.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• pH/ATC three-in-one combination electrode
• Glass pH combination electrode
• Temperature electrode
• DO electrode
• pH standard buffer solution 4.00, 7.00, 10.01 (50ml)
• 9V power adapter
• 6V power adapter membrane cap
• DO electrode inner solution
• Cathode polishing paper
• Stirring bead
• Battery
• RS-232 communication cable
• Communication software disk
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 12 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series.
• High purified water and ammonia added purified water pH measuring mode can be set up.
• With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
• Equips new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make DO measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.
• Polarogram type DO electrode has special electrode calibration cap. Only needs 3 to 5 minutes for electrode polarization. Electrode adopts combination diaphragm cap which very convenient to use. Each do electrode equips with three spare diaphragms caps.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.14 SCT BEN-CON-4 Precision Conductivity/DO Benchtop Meter by ScichemTech

SCT precision conductivity DO meter for high precision measurement of the conductivity and dissolved oxygen in laboratory.

Suitable for bio-technology, aqua culture, power plant and environmental protection industries.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• Conductivity electrode
• DO electrode
• 1413us/cm conductivity standard solution
• 9V power adapter
• 6V power adapter
• Membrane cap
• DO electrode inner solution
• Cathode polish paper
• B628 stirring bead
• Battery
• RS232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 7 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• The new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make DO measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.
• Polarogram type DO electrode has special electrode calibration cap. Only needs 3 to 5 minutes for electrode polarization. Electrode adopts combination diaphragm cap which very convenient to use. Each DO electrode equips with three spare diaphragms caps.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.15 SCT BEN-DO-1 Benchtop DO/Temperature Meter by ScichemTech

SCT benchtop DO temperature meter with automatic salinity compensation and automatic air pressure compensation.

Equipped with intelligent stirrer, flexible electrode holder and operation instruction.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• DO electrode
• DO electrode inner solution
• Membrane cap (for DO electrode use)
• Cathode polishing paper
• 9V power adapter (for meter use)
• 6V power adapter (for stirrer use)
• RS-232 communication cable
• Communication software CD
• Stirring bead
• AA battery
• Operation manual
• Packing list

Features:

• SCT benchtop meter is designed to measure dissolved oxygen and temperature.
• SCT DO measurement has ATC, automatic salinity compensation and automatic air pressure compensation.
• The new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make do measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.
• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Electrode adopts combination diaphragm cap, assembling sensitive membrane with diaphragm cap, which very convenient to replace the sensitive membrane. The user only needs to screw the new membrane cap on the electrode.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.16 SCT BEN-SOD-1 Benchtop Sodium Ion Meter by ScichemTech

SCT benchtop sodium ion meter is suitable for measuring low sodium ion concentration in the water.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• Stir bead
• Sodium ion electrode
• Reference electrode
• Temperature electrode
• pNA 1.00 standard solution
• 10^-1 mol/l CSCL reference solution
• 9V power adapter
• 16V power adapter
• AA battery
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose Etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Sodium electrode range.
• Sodium ion electrode, reference electrode and temperature electrode.
• Can switch 4 kinds of concentration unit: px, mol/l, mg/l and ppm
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets : ISO9001 & CE standards.

SCT-108.003.17 SCT-BEN-CAL-01 Benchtop Calcium Ion Concentration Meter by ScichemTech

SCT benchtop calcium ion meter widely used in detecting the concentration of calcium ions in water.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• Stir bead
• Calcium ion combination electrode
• Calcium electrode inner solution
• Calcium electrode measuring head
• Tool for filling calcium electrode inner solution
• Temperature electrode
• PCA 1.00 standard solution
• 9v power adapter
• 6v power adapter
• Battery
• RS-232 communication cable
• MP518 communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features upto automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Calcium electrode range.
• Calcium ion combination electrode and temperature electrode.
• Can switch 4 kinds of concentration unit: px, mol/l, mg/l and ppm
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards

SCT-108.003.18 SCT-BEN-FLU-1 Benchtop Fluoride Ion Concentration Meter by ScichemTech

SCT benchtop fluoride ion meter suitable for detecting fluoride ion in the water samples.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• Stir bead
• Fluoride ion electrode
• Reference electrode
• Temperature electrode
• PF1.00 standard solution
• 9V power adapter
• 6V power adapter
• Battery
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• There are three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Electrode range.
• Fluoride ion electrode, reference electrode and temperature electrode.
• Can switch 4 kinds of concentration unit: px, mol/l, mg/l and ppm
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.004.01 SCT SEDIMENT-1 Portable Manual Silt Density Index Meter by ScichemTech

Includes:

• ASTM instructions for measuring silt density index
• Filter Holder
• Pressure Gauge
• Pressure Regulator
• Ball Valve
• Graduated Cylinder
• Thermometer
• Tubing
• Filter Tweezers

Features:

• SCT SDI METER is completely assembled in a portable COMPACT case ready for on-site testing
• Includes ASTM instructions for measuring silt density index
• Feed pressure required: Min 40 psi
• Assembled with Filter Holder, Pressure Gauge, Pressure Regulator Ball Valve, Graduated Cylinder, Thermometer, Tubing, Filter Tweezers.
• Filters not included

SCT-108.005.26 SCT-CL-MAXI Chlorine Controller by ScichemTech

Includes:

• Chlorine sensor
• Fixation clamps
• Instruction manual

Features:

• SCT-CL (Chlorine) MAXI CONTROLLERS are designed with creativeness to get the elegance and produced with proper quality, and meets the specifications for the Water related applications with high level performance
• SCT-CL (Chlorine) MAXI controllers are an industrial instrument used for online analysis and monitoring.
• SCT-CL (Chlorine) MAXI CONTROLLERS are made in a attractive pleasant colour with a Large and Clear blue white LCD Display
• SCT-CL (Chlorine) MAXI CONTROLLERS has Microprocessor based controllers, which gives stable and accurate readings.
• SCT-CL (Chlorine) MAXI CONTROLLERS has Low power consumption and produces less internal heat.
• SCT-CL (Chlorine) MAXI CONTROLLER S has an isolated 4-20 mA current output
• SCT-CL (Chlorine) MAXI CONTROLLERS has a RS 485 communication interface
• SCT-CL (Chlorine) MAXI CONTROLLERS has an automated sensor cleaning control output.
• SCT-CL (Chlorine) MAXI CONTROLLERS has diaphragm polagraphic electrodes. The electrode consists of cathode, anode, electrolyte and a layer of gas permeability diaphragm on the cathode. The measured residual chlorine diffuse to the cathode through diaphragm. The proper polarization voltage between the cathode and the anode, which can deoxidize the residual chlorine on the cathode. These chemical actions proportional to the residual chlorine which is in the measured medium. which gives reliable measurements.
• SCT-CL-(Chlorine) MAXI CONTROLLERS are panel mount type of controllers.
• SCT-CL-(Chlorine) MAXI CONTROLLERS proved to work continuously in any harsh environmental conditions for the In line measurement and control of accurate CHLORINE value.
• SCT-CL-(Chlorine) MAXI CONTROLLERS has a major advantage that, no reagents are used. It has the direct measurement and readings

SCT-108.005.31 SCT-DO-MAXI Dissolved Oxygen Controller by ScichemTech

Includes:

• DO sensor
• Fixation clamps
• Instruction manual

Features:

• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are designed with creativeness to get the elegance and produced with proper quality, and meets the specifications for the Water related applications with high level performance
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are an industrial instrument used for online analysis and monitoring.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are made in a attractive pleasant colour with a Large and Clear blue white LCD Display
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are Microprocessor based controllers, which gives stable and accurate readings.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS uses Low power consumption and produce less internal heat.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are has the polagraphic type DO electrode. This oxygen electrode is a diaphragm polarographic (clark) electrode. The conductibility electrolyte makes the polarization between cathode and anode. Between the cathode and the anode, the proper polarization voltage can deoxidize the O2 at the Cathode electrode. Cathode reaction: O2+ 2H2O +4e -- 4OH-, Anode reaction : 4AG +4Cl- -- 4AgCl + 4e. These chemical reactions produce the current which is proportional to the O2 in the test solution.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS has an isolated 4-20 mA current output
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are panel mount type of controllers.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS proved to work continuously in any harsh environmental conditions for the In line measurement and control of accurate CHLORINE value.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS has a major advantage that, no reagents are used. it has the direct measurement and readings

SCT Dosing Chemicals Mixer for 500 litre dosing tank supplied with shaft length 1000mm, Revolving speed (rpm) 80-120, with stainless steel plastic coating blade.