$100 - $150, Test and Measurement

608 Digital Manometer by Test Products International

Single input manometer with ±60inH2O range. Four units of measure: inH2O, mbar, KPa, PSI and mmH20. Backlight display.

The 608 digital manometer measures pressure or vacuum in four units of measure. Please follow manufacturers recommendations on all equipment being serviced with the 608.

Features:

• Single input with +/-60 H2O range
• Four units of measure (inH2O, mbar, KPa, PSI and mmH20)
• Display - 4 digit with backlight
• Auto Off: Conserve battery power
• Built in hanging hook and back magnets

Standard Accessories (Included):

• 9V Alkaline battery (A009A)
• Silicone Tubing (A774)

610 Single Input Manometer by Test Products International

Single Input Manometer with ±80 inH2O range and 0.01 in H2O resolution. Auto power off, Backlight display, Zero function, Trim mode to stabilize readings.

The TPI 600 series is a hand held range of pressure meters and can be summarized as follows.

• TPI 610 Single Input - 4 Function - single unit of pressure
• TPI 615 Single Input - 7 Function - 7 units of pressure
• TPI 620 Dual Input differential 4 Function single unit of pressure
• TPI 625 Dual Input differential 7 Function 7 units of pressure

All these models measure over the range of -40.0 to +120.0 mbar. Each unit has increased resolution of 0.01 mbar and automatically auto-ranges at + 19.00 mbar to 0.1 mbar resolution. Each model is supplied complete with carry pouch, battery and instruction manual.

Features:

• Single input with ±80" H2O range
• Display - 4 digit with backlight
• Smooth - Stabilizes display when measuring fluctuating pressures
• Auto Off: Conserve battery power

Standard Accessories (Included):

• 9V Alkaline battery (A009A)
• Soft Pouch (A600)
• Silicone Tubing (A774)

719 Combustible Gas Leak Detector by Test Products International

The 719 offers 30ppm sensitivity to detect combustible gasses. Easily operated with one hand, leaks are pinpointed using the audio and visual indicators. An adjustable tic rate helps eliminate background gas concentration in contaminated environments.

The 719 is easy to use and is built to last. It is backed by a 3 year limited warranty. Please remember to complete and return your product warranty registration card.

Features

• Instant response
• 30 ppm (methane) sensitivity
• Adjustable tic rate
• One-hand operation
• Visual and audible leak indication
• 16'' gooseneck
• Soft carrying pouch

Applications

• Detect combustible gasses including natural gas methane, propane (LPG), gasoline, diesel, and kerosene
• Trace natural gas lines and fittings for leaks
• Check gas generation for leaks

The 719 comes complete with the following accessories:

• Carrying Pouch (A780)
• Instruction Manual
• Battery and Sensor (Installed and Calibrated)

720B Combustible Gas Leak Detector by Test Products International

The 720B offers 10ppm sensitivity to detect combustible gasses. Easily operated with one hand, leaks are pinpointed using the audio and visual indicators. An adjustable tic rate helps eliminate background gas concentration in contaminated environments.

The 720b is an advanced state-of-the-art leak detector capable of detecting many combustible, noncombustible and toxic gases.

Features

• Instant response
• 10 ppm (methane) sensitivity
• Adjustable tic rate
• One-hand operation
• Visual and audible leak indication
• 16" gooseneck
• Soft carrying pouch
• Measurement capability

Applications

• Detect combustible gasses including natural gas methane, propane (LPG), gasoline, diesel, and kerosene
• Trace natural gas lines and fittings for leaks
• Check gas generation for leaks

The following is a partial list of gases that the 720b is sensitive to:

Standard accessories

• Sensor (A739)
• Instruction Manual: 720b Instruction Manual
• Soft Pouch (A700)

Optional accessories

• Hard Case (A714)
• Earphone (A710)

750A Refrigerant Leak Detector by Test Products International

The 750a features 400 hour sensor life under normal use; a spare sensor is included with each instrument for a total of 800 hours of continuous use and can detect leaks as small as 0.2 ounces per year (R134a / R22).

Whether testing for leaks in air conditioning, refrigeration, or automotive AC, the versatile 700 series spans the diverse needs of technicians, refrigeration engineers, and maintenance personnel around the globe. From freezer coils to heat pumps, experience fast, reliable results that save you both time and money.

The TPI 750a is a state-of-the-art refrigerant leak detector capable of detecting all halogen based gases. Selectable sensitivity combined with an adjustable tick rate will allow any service professional to pinpoint those tough to find leaks even in contaminated environments.

Sensor life can be extended by fitting a 1/2" long piece of vinyl tubing onto the sensor tip. This tubing helps prevent foreign material from getting into the sensor during tests; clean or replace the tube regularly.

Even though TPI refrigerant leak detector sensors are very durable and can last up to 400 hours, sensor life can be aided by press fitting a 1/2" long piece of vinyl tubing onto the sensor tip. This tubing helps prevent foreign material from getting into the sensor during tests. Clean or replace the tube regularly.

Features

• Detects all existing refrigerants and blends including 404A, PURON 410A and *R-507 (AZ50)
• 400 hour individual sensor life; a spare sensor is included with each instrument for a total of 800 hours of continuous sensor use.
• Fast response; Begin testing immediately after power on
• 0.2 ounce per year sensitivity
• One hand thumb wheel operation
• Pinpoint small leaks easily by elimination of background concentration with fully adjustable tic rate
• Visual indicators for power, tic rate and battery replacement
• Optional earphone attachment

Applications

• Check for leaks in refrigeration systems
• Test for leaks in air conditioning systems and cooling units
• Find leaks in automotive air conditioning systems

Standard Accessories

• Sensor: A712
• Instruction Manual: 750a Instruction Manual
• Soft Pouch A700

Optional Accessories

• Soft Case w/strap A755
• Earphone A710
• Test vial A713

A771 Carbon Monoxide Adapter for DMMs and Clamp-on Meters by Test Products International

The A771 is a CO adapter designed to work with your DMM to measure ambient air CO. Can also be used as a personal COalarm.

National Ambient Air Quality Primary Standards in the US call for less then 9 ppm carbon monoxide for an 8 hour average during any 12 month period.

Concentrations of 1 to 2 ppm may be found in homes with a normally operating gas furnace to well over 1,000 ppm in homes with a faulty furnace.

Just 200 ppm CO over 2 to 3 hours can cause slight headache, fatigue, dizziness, and nausea.

Carbon Monoxide testing is a crucial service provided by HVAC/R technicians.

The A771 is an advanced state-of-the-art Carbon Monoxide monitor that may be used to measure levels of carbon monoxide (CO) in the parts per million (ppm) range when used with a digital multimeter (DMM).

Features

• No Bulk! Easily carry one on your belt or tool box
• Easy to use with any DMM or Clamp-on Meter with a minimum 3 1/2 digit LCD, 2 or 4 Volt DC range and 10M or greater input impedance
• Detects CO levels from 0-1999 ppm, with resolution as low as 0.1ppm and ± 5% of reading accuracy
• Low battery and power indication
• Use with any DMM with minimum 2 1/2 digit LCD, 2 or 4Volt DC range and 10M Ohm or greater input impedance
• Calibrate in the field
• Complete with Belt pouch, A771P
• Built-in alarm is preset to 30ppm. Setting can be set by user
• 3 Year Limited Warranty

Applications

• Conduct Tests of CO Levels In Room Air To Meet ASHRAE and OSHA Standards
• Confirm Proper Operation of Alarming CO Detectors in Households
• Check For Proper Installation of Ventless Gas Fireplaces, Furnaces, and Other Combustion Devices.
• Use The A771 as a Personal Alarm Preset at 30 CO

SPD480 Phase Rotation Indicator by Test Products International

The TPI Model SPD480 Phase Rotation Indicator operates properly on variable frequency drives. Does not give false readings by pulsed waveforms.

Features

• Easy to operate - connect one lead to each phase
• Large alligator clips for easy connection to cables and bus bars
• Operates properly on variable frequency drives. Does not give false readings by pulsed waveforms
• Verify proper rotation on feeder extensions
• Determine phase rotation on secondary potential transformers

Reliable K-type thermocouple, low battery indicator, and easy on-site thermometer calibration checking. Accuracy at 23°C is ±0.5°C or ± .9%°F.

TT210SS Adhesive Vinyl Class 2.1 Flammable Gases Placard (10.75" x 10.75") by GHS Safety

Placards are displayed on vehicles, tankers, and containers to identify the risk of products being transported. GHS Line of placards are manufactured to meet the UN specifications on the Transport of Dangerous Goods.

These placards are stocked in 3 materials. Paper Tag-board placards are a cost effective single use format. Rigid Plastic placards will withstand multiple uses even in adverse weather conditions.

Outdoor Grade Peel and Stick Vinyl placards offer a permanent marking solution and will withstand outdoor environments.

TT230PS Adhesive Vinyl Class 2.3 Toxic Gases Placard (10.75" x 10.75") by GHS Safety

Placards are displayed on vehicles, tankers, and containers to identify the risk of products being transported. GHS Line of placards are manufactured to meet the UN specifications on the Transport of Dangerous Goods.

These placards are stocked in 3 materials. Paper Tag-board placards are a cost effective single use format. Rigid Plastic placards will withstand multiple uses even in adverse weather conditions.

Outdoor Grade Peel and Stick Vinyl placards offer a permanent marking solution and will withstand outdoor environments.

TT300PS Adhesive Vinyl Class 3 Flammable Liquids Placard (10.75" x 10.75") by GHS Safety

Placards are displayed on vehicles, tankers, and containers to identify the risk of products being transported. GHS Line of placards are manufactured to meet the UN specifications on the Transport of Dangerous Goods.

These placards are stocked in 3 materials. Paper Tag-board placards are a cost effective single use format. Rigid Plastic placards will withstand multiple uses even in adverse weather conditions.

Outdoor Grade Peel and Stick Vinyl placards offer a permanent marking solution and will withstand outdoor environments.

TT410PS Adhesive Vinyl Class 4.1 Flammable Solids Placard (10.75" x 10.75") by GHS Safety

Placards are displayed on vehicles, tankers, and containers to identify the risk of products being transported. GHS Line of placards are manufactured to meet the UN specifications on the Transport of Dangerous Goods.

These placards are stocked in 3 materials. Paper Tag-board placards are a cost effective single use format. Rigid Plastic placards will withstand multiple uses even in adverse weather conditions.

Outdoor Grade Peel and Stick Vinyl placards offer a permanent marking solution and will withstand outdoor environments.

TT420PS Adhesive Vinyl Class 4.2 Spontaneously Combustible Placard (10.75" x 10.75") by GHS Safety

Placards are displayed on vehicles, tankers, and containers to identify the risk of products being transported. GHS Line of placards are manufactured to meet the UN specifications on the Transport of Dangerous Goods.

These placards are stocked in 3 materials. Paper Tag-board placards are a cost effective single use format. Rigid Plastic placards will withstand multiple uses even in adverse weather conditions.

Outdoor Grade Peel and Stick Vinyl placards offer a permanent marking solution and will withstand outdoor environments.

TT430PS Adhesive Vinyl Class 4.3 Water Reactive Substances Placard (10.75" x 10.75") by GHS Safety

Placards are displayed on vehicles, tankers, and containers to identify the risk of products being transported. GHS Line of placards are manufactured to meet the UN specifications on the Transport of Dangerous Goods.

These placards are stocked in 3 materials. Paper Tag-board placards are a cost effective single use format. Rigid Plastic placards will withstand multiple uses even in adverse weather conditions.

Outdoor Grade Peel and Stick Vinyl placards offer a permanent marking solution and will withstand outdoor environments.

TT510PS Adhesive Vinyl Class 5.1 Oxidizing Substances Placard (10.75" x 10.75") by GHS Safety

Placards are displayed on vehicles, tankers, and containers to identify the risk of products being transported. GHS Line of placards are manufactured to meet the UN specifications on the Transport of Dangerous Goods.

These placards are stocked in 3 materials. Paper Tag-board placards are a cost effective single use format. Rigid Plastic placards will withstand multiple uses even in adverse weather conditions.

Outdoor Grade Peel and Stick Vinyl placards offer a permanent marking solution and will withstand outdoor environments.