$100 - $150, Test and Measurement

0560 1108 110 NTC Thermometer by Testo

The highly accurate, versatile testo 110 temperature measuring instrument is ideal for applications in rough conditions on account of its protective case, TopSafe. The engineering used is specially designed for measurements in refrigerated store rooms, cabinets and for outdoors. Minimum and maximum values are shown on a clear 2 line, backlit display or, if required, are printed on site on a Testo printer. In addition to the wide range of standard handheld probes available (optional), a wireless radio probe can be used simultaneously.

• Wireless measurement with radio probes possible (optional)
• Measurement data printout on site on Testo fast printer (optional)
• TopSafe, the indestructible protective case (optional)
• Audible alarm (adjustable alarm limits)
• Displays max/min readings in 2 line, backlit display
• Minimum/maximum value memory
• Large backlit display
• Auto-Hold automatically recognises full-scale value

765KC Thermocouple Panel Thermometer, Type K, Range -105 to 1372 °C by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

AVG2 Digital Vacuum Micron Gauge Accessory Head by Fieldpiece

The Fieldpiece Digital Vacuum Gauge Accessory, model AVG2, is a thermistor based digital multimeter accessory that digitally measures a vacuum of 50 to 2000 microns and converts that reading into millivolts DC on your compatible DMM or our electronic handle and data logger. LEDs provide a pump down indicator showing progress from atmospheric pressure. The sensor has been designed to withstand pressures up to 500 psi (3400kPa) so that no damage to the AVG2 will occur if it is exposed to full system pressures.

Designed for HVAC/R, the Digital Vacuum Gauge Accessory, model AVG2, gives technicians an accurate results in a compact design. Other features and benefits include:

• Displays pressure in microns in steps of 1 micron
• Range: 50 to 2000 microns of mercury (50 - 4000 if meter has millivolt range)
• Resolution: 1 micron of mercury
• Pump down indication: when pumping down from atmospheric pressure to 2000 microns, output of head goes from over 3VDC to 2VDC
• Straight-in access to sensor for easy cleaning
• Fitting: 1/4" flared brass fitting (male)
• Accuracy (@~75°F): ±10%, 0-1000 microns of mercury
• Auto-off can be disabled for data logging
• "T" for inline vacuum testing

Includes

• Digital Vacuum Gauge Accessory - AVG2
• 9V Battery (installed)
• Operator's Manual

17050-00 InnoCal NIST-Traceable Calibration; Tachometer by Digi-Sense

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated. Measurements reported on our reports are traceable to SI units via national standards maintained by NIST and are performed in compliance with MIL-STD-45662A, ANSI/NCSL Z540-1-1994, 10CFR50, Appendix B, ISO9002-94, and ISO/IEC 17025:2005

InnoCal's Metrology Laboratory is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA); certificate number 1746.01. This accreditation is your assurance that one of the foremost outside auditing agencies approves of our internal laboratory policies and procedures.

• Calibration service for contact tachometers (mechanical), non-contact tachometers (optical), and combination tachometers featuring both contact and non-contact options

SC66 Basic Manual Ranging Clamp Meter by Fieldpiece

The SC66 is the top Fieldpiece clamp meter among HVACR instructors. It's a manual ranging DMM that includes the electrical ranges students and technicians use for most HVACR work, plus temperature, capacitance and DC current - all for a low price. It also has several safety features like a high-voltage LED and beeper, a continuity warning, push button non-contact voltage (NCV), a lead holder on the clamp, and MAX hold so you can concentrate on the test point, hook up, and see the results after you've disconnected. Instructors and their students tell us they like the fact that it is a manual ranger so they have to think about what they're hooking up to before they do it. They also like that the SC66 is just the right amount of meter for residential techs just starting out.

• Non-contact Voltage
• High Voltage and Continuity Indicators
• 200AAC
• Capacitance (MFD)
• Temperature
• Microamps DC - Flame Rectification Tests
• Silicone Leads
• MAX Hold
• Volts AC
• Volts DC
• Resistance (Ohms)
• Diode Test
• Rugged ABS case
• Auto power-off
• Safe one-handed testing

Includes

• Manual Ranging Clamp Meter with Temperature - SC66
• Wrap Tab K-Type Thermocouple - ATB1
• Silicone Test Leads - ASLS2
• Large Single Meter Case - ANC7
• 9-Volt Battery (installed)
• Operator's Manual

765PTAF Thermocouple Panel Thermometer, Type PTA, Range -58°F to 199.9°F by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

Measuring Range: 58 to 572°F

765KF Thermocouple Panel Thermometer, Type K, Range -157°F to 1999°F by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

765JF Thermocouple Panel Thermometer, Type J, Range -346°F to 1400°F by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

0560 4101 410-1 Pocket Pro Air Velocity & Temperature Meter by Testo

testo 410-1 measures air speed and temperature. It is ideal for quick spot checks at air outlets on account of its integrated measurement with the 40mm vane. Timed mean calculation is possible. In addition to air speed and temperature, testo 410-2 also measures air moisture. Testo's very own, patented humidity sensor guarantees accurate readings. In this way, air conditions can be reliably checked.

• Flow velocity measuring instrument with temperature measurement
• Integrated measurement with 40 mm vane
• Timed mean value calculation
• Hold function and max./min. values
• Windchill calculation for outside areas (perceived temperature)
• Display illumination
• Protective cap for safe storage
• Including wrist strap, belt holder and calibration protocol

WD-20250-93 Thermistor Thermometer, NIST-Traceable Calibration by Digi-Sense

The Digi-Sense Professional Single-Input Thermometers offer fast response and laboratory accuracy. Features include automatic backlight, Max/Min readings, and automatic power-off. These thermometers provide precise measurements when accuracy is a must, delivering dependable results every time! Each model is packed with distinctive features for use in a wide array of applications. Robust and reliable constructed to protects against knocks and jars. These thermometers produce a high degree of accuracy, with a rapid response time, and exceptional battery life of up to 3000 hours.

Digi-Sense instrument are fully tested and calibrated to NIST-traceable standards, saving you hundreds of dollars and extra waiting time to calibrate separately.

Key Features

• Reliable measurements, guaranteed!
• NIST-traceable certificate included
• Heavy duty construction to protect against knocks and jars.
• Super lager LCD for easy viewing of data
• Accepts a wide variety of probes
• Min, Max, and Avg readings, for quick analysis of the object
• Electronic Offset function allows compensation of probe errors

Includes

Protective rubber armor boot with built-in stand, one 9 V battery, and NIST-traceable calibration report with data supplied by InnoCal. Data logging models 20250-92, -94, and -96 also include a USB cable and software.

0563 1080 108 Type K Waterproof Food Thermometer by Testo

In the food industry, temperature measurements are part of the daily routine. The quality of the products can only be tested and guaranteed by precise measurements. And this is also the only way to fulfil HACCP regulations.The testo 108 carries out spot-check measurements in seconds. Whether in the transport and storage of foods, in restaurants, in large kitchens or in chain restaurants.

Thanks to the softcase (protective cover). It is insensitive to moisture and water, and is safe from damage due to impact or dirt. Wherever temperature needs to be recorded, this instrument measures everything which is necessary.

• Easy operation and handling
• Instrument and probe waterproof (IP67)
• Conform to HACCP and EN 13485
• Universally applicable