$100 - $150, Test and Measurement

SCT-108.002.28 SCT LYN Sound Level Meter by ScichemTech

Includes:

• Battery
• Carrying Case

Features:

• A complete portable SCT meter for level of sound / noise measurements.
• Compact design with backlight display
• Auto range and auto power off.
• Min/max storage and recall
• Test range from 30 to 130 db (decibels) with 0.1 db (decibels) resolution.
• A & C frequency weighting.
• Fast & slow dynamic characteristic models
• Battery operated.

SCT-108.002.50 SCT SKYE Magnetic Field Meter by ScichemTech

Includes:

• 9V Battery
• Instruction Manual

Features:

• A complete portable SCT meter for magnetic field measurements.
• An electromagnetic wave simply means the wave motion of the electromagnetic field (EMF)
• This meter is applied to measuring electromagnetic fields of extremely low frequency (ELF) of 30hz to 300hz.
• It is capable of measuring the electromagnetic field radiation intensity that is produced from electric transmission equipment, power line, electric oven, air conditioner, refrigerator, computer monitor, video/audio device and so forth.
• The magnetic field unit is tesla (t), gauss(g), micro-tesla (ut) or milli-gauss(mg).
• Data hold, maximum hold, overload indication.
• Battery operated with low battery indication.

SCT-108.002.54 SCT SOLAR Portable Solar Power Meter by ScichemTech

Includes:

• 9V battery
• Instruction Manual

Features:

• A complete portable SCT meter for solar power measurements.
• End-mount light sensors.
• Select either power or transmission.
• Select either W/M2 or BTU/(FT2XH) units
• Data hold/max/min modes

SCT-108.002.70 SCT WILL Infrared Thermometer (High Performance & Accuracy) by ScichemTech

Includes:

• 9V DC Battery
• Instruction Manual
• Carrying Case

Features:

• A complete portable SCT meter for non contact temperature measurements
• New series includes high performance, high accuracy
• Emissivity adjustable from 0.1 to 1.00 in 0.01 steps (adjustable)
• Extended long time measuring reliability
• Laser sighting on/off is switchable
• High DS ratio
• Option to select °C/°F
• Audible alarms
• Backlight LCD display
• Temperature data storage
• Battery operated

SCT-108.002.71 SCT WIND Infrared Thermometer (High Temperature 999°C) by ScichemTech

Includes:

• 9V DC Battery
• Instruction Manual
• Carrying Case

Features:

• A complete portable SCT meter for non contact temperature measurements.
• Temperature range: -50°C to 999°C
• Fixed emissivity @ 0.95
• Ultra low power consumption in shutdown mode.
• Extended long time measuring reliability.
• Laser sighting on/off is switchable.
• High DS ratio.
• Backlight LCD display.
• Electronic trigger lock.
• Option to select °C/°F
• Battery operated.

SCT-108.002.72 SCT XANDY Infrared Thermometer (High Performance & Fixed) by ScichemTech

Includes:

• 9V DC Battery
• Instruction Manual
• Carrying Case

Features:

• A complete portable SCT meter for non contact temperature measurements.
• Temperature range: -50°C to 999°C
• Fixed emissivity @ 0.95
• Extended long time measuring reliability.
• Laser sighting on/off is switchable.
• High DS ratio/max-min/cf/∆t
• Backlight LCD display with audio alarm.
• Option to select °C/°F
• Electronic trigger lock.
• 10 point memory battery operated.

SCT-108.002.PB SCT-GDS-2 pH Titration Hotplate Magnetic Stirrer by ScichemTech

SCT magnetic stirrers and magnetic stirrer & hotplates are made exclusively for SCT water testing / measurement. Benchtop series: however, customer can use these products for your general purposes also.

Includes:

• DC6V Power Adapter
• Instruction Manual

Features:

• Small and compact
• Made of abs plastic
• Range 0 - 2300 rpm
• Stepless speed/regulation
• Stirrer with heating upto 120°c
• 1 liter stirring capacity
• 6v DC - power adapter

SCT-108.007.01 SCT-TANK-1 SCT Dosing Tank (LDPE) - 100 Litre by ScichemTech

SCT dosing tanks are with red screw fitting lid with a raised section to mount dosing pumps, mixers, level sensors etc. Made of high quality LDPE (low density polyethylene) cylindrical in shape

Tactical Carrying Case by SE International

This tactical carrying case is custom designed for use with the Radiation Alert Ranger®, Monitor200, and Monitor1000EC. It was created for users whose operational needs are primarily in the field. The shell is carefully constructed using durable and lightweight KYDEX. Thermoplastic provides ample protection against the daily wear and tear encountered when wearing a holstered unit.

This versatile carrying case is also equipped with an adjustable tensioning clip, allowing the user to dial in the exact amount of pressure needed. This ensures that the instrument is securely seated in the holster while, at the same time, remaining easy to extract and re-insert. The Blade-Tech Tek-Lok belt clip is the industry standard when it comes to belt mounting solutions. Innovative and versatile, the adjustable Tek-Lok can accommodate up to a 2.25" belt as well as a multitude of mounting positions.

Smart design. Durable materials. This case is an excellent choice for anyone operating their Radiation Alert Ranger®, Monitor200, or Monitor1000EC in an uncontrolled environment.

163 Autoranging DMM with Bar Graph, Boot, Test Leads, and Manual by Test Products International

The 163 is a hand-held autoranging DMM. The 163 measures ACV, DCV, ACA, DCA, Resistance, Diodes and Continuity.

Features:

• Safety: Meets CE and IEC 1010 requirements. UL Listed to U.S. and Canadian Safety Standards.
• Data Hold: Holds the reading on the display.
• Range: Allows you to either manual range or use auto range to select the appropriate range.
• Auto Off: Preserves battery life. LCD shows oFF when in this mode.
• Large LCD: Easy to read at all angles and the majority of lighting levels.
• Rubber Boot: Added protection when the instrument is dropped.
• 0.5% DCV basic accuracy
• 0 to 750 ACV; max resolution 1mV
• 0 to 1,000 DCV; max resolution 0.1mV
• 0 to 32.6MΩ; max resolution 0.1Ω
• Audible continuity
• 0 to 10 amps AC/DC; max resolution 0.1uA
• Analog bar graph
• cULus 61010-1
• CAT II - 1000V, CAT III - 600V

Applications:

• Thermocouples in furnaces or gas applications
• Heat anticipator current in thermostats
• Line voltage
• Voltage of direct drive DC motors
• Control circuit voltage
• Motor run and start capacitors
• Flame safeguard control current
• Heating element resistance (continuity)
• Compressor winding resistance
• Contactor and relay coil resistance
• Continuity of wiring
• Continuity of circuit breakers
• Temperature with optional temperature adapter
• Bar graph to indicate rapid fluctuations in measurements

The 163 comes complete with the following accessories:

• Rubber Boot
• Test Lead Set
• Battery
• Instruction Manual

270 Clamp-On Tester with Digital Multimetervisit by Test Products International

Perfect for tight, narrow, spaces. The new TPI 270 with slim jaw and body is ideal for cramped work areas and crowded electrical panels.

The slim design 270 is a hand-held, autoranging clamp-on DMM. Extra large numerals, min/max, capacitance, DC microamps and duty cycle are just a few of the features of the 270. An affordable choice, the 270 offers measurements in all basic electrical functions with additional advanced features like non-contact voltage.

Features:

• Measure motor in-rush current and run current
• Measure temperature differential with relative mode
• Non-contact voltage feature can be used to immediately see if power is being supplied to the 24VAC control circuit of thermostats
• Frequency, Min/Max/Record, Data Hold and Peak Hold
• Up to 40,000 Microfarads to test run and start capacitors
• 4,000 count display with 41 segment analog bargraph
• Auto & Manual Ranging
• Low Battery Indicator
• Over Range Indication ("OL")
• Hi Voltage Indicator (>30V AC/DC)
• Auto Power Off after 30 minutes
• Separate Battery/Fuse Compartment
• Low Ohm Range (400V)
• Amps AC Resolution: 0.01A
• VDC/VAC Resolution: 0.1mV
• DC μA measurement (0.01 μA resolution)
• Temperature measurement with 0.1° resolution

Applications:

• Measure flame safety control current
• Test run and start capacitors and motors
• Measure motor run current and capture peak motor start up amperage
• Measure heat anticipator current
• Determine thermocouple voltage
• Test line and control voltages
• Measure heating element resistance
• Measure air temperature in ducts
• Test for the presence of voltage in circuits without contacting the circuit
• Measure temperature differential using relative mode

The 270 comes complete with the following accessories:

• Carrying Pouch
• Test Lead Set
• Temperature Probe
• Instruction Manual
• Battery & Fuse

275 Clamp-On Tester with True RMS Digital Multimeter and 11,000 Count Display by Test Products International

Clamp-On Tester with True RMS Digital Multimeter & 11,000 Count Display. The new TPI 275 with slim jaw and body is ideal for cramped work areas and crowded electrical panels.

The slim design 275 is a hand-held, autoranging clamp-on DMM. Extra large numerals, min/max, capacitance, DC microamps and duty cycle are just a few of the features of the 275. An affordable choice, the 275 offers measurements in all basic electrical functions with additional advanced features like non-contact voltage.

Features:

• True RMS
• 11,000 count display
• Up to 400 amps AC/DC
• Auto & Manual Ranging
• Data Hold
• Low Battery Indicator
• Over Range Indication ("OL")
• Peak Hold
• Min/Max
• Relative Mode
• Hi Voltage Indicator(>30V AC/DC)
• Non-contact voltage detection
• Auto Power Off after 30 minutes
• Separate Battery Compartment
• Low Ohm Range (110Ω)
• Amps AC Resolution: 0.01A
• VDC/VAC Resolution: 0.01mV
• DCiA measurement (0.01μA resolution)
• Temperature measurement

Applications:

• Measure DC amperage of motor drive units
• Measure flame safety control current
• Test run and start capacitors and motors
• Measure motor run current and capture peak motor start up amperage
• Measure heat anticipator current
• Determine thermocouple voltage
• Test line and control voltages
• Measure heating element resistance
• Measure air temperature in ducts
• Test for the presence of voltage in circuits without contacting the circuit
• Measure temperature differential using relative mode

The 275 comes complete with the following accessories:

• Carrying Pouch
• Test Lead Set
• Temperature Probe
• Instruction Manual
• Battery & Fuse

343C3 Dual Input K-Type Thermocouple Thermometer with Two GK13M Probes and Two CK21M Probes by Test Products International

TPI contact temperature testers are accurate, reliable, and built to last. Models 341K, 343 and 367D can be auto field calibrated to system accuracy (tester plus probe) of ± 1°F in less than 10 seconds in ice water.

Auto Field Calibration Perform ice bath calibration to achieve ±1°F system accuracy within the 30°F to 120°F temperature range. Calibration is an easy two-step process performed with instrument keypad, no additional tools needed.

Features:

• Auto Field Calibrate in less than 10 seconds in ice water to achieve ± 1°F system (tester & probe) accuracy within 30°F to 120°F temperature range
• Temp1, Temp2, Temp1-Temp2 display modes
• Min / Max Record
• Auto Resolution (0.1° / 1°)
• °C/°F Selectable
• Hold feature freezes reading on display
• Auto Off
• Protective rubber boot
• Easy to read LCD display

Includes:

• Two GK13M temperature probe
• A908 Case
• Two CK21M pipe clamp probes

371 Infrared Thermometer (IR) by Test Products International

Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

Features:

• Laser pointer
• Record function (Min/Max)
• Display data hold function
• Back light
• Trigger switch
• °C and °F selectable
• Gun-type compact design
• Operating lock function
• 9V battery and soft pouch included

Applications

• Heating & AC/R system measurements on all non-metallic and many metallic surfaces
• Troubleshoot overheating devices
• Remote Vent and return temperature measurements
• Tubing, piping and sheet metal temperature

373 Laser Sighting, 8:1 Distance to Spot Ratio, 14 to 950 F, Soft Pouch by Test Products International

Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

Measure Hard-to-reach, sensitive, or large moving target areas. Use the 380, 381, and 383 to measure surface temperature and watch the LCD immediately display accurate data without the use of a probe.

Features:

• Easy to use one button operation
• 0.1 resolution for best reading
• Data hold function
• Soft holster pouch included
• 8:1 distance to spot ratio
• Large, easy to read LCD
• °C and °F selectable
• 9V battery included

375 Combination Non-contact (IR) and Contact Thermometer by Test Products International

Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

Features:

• Laser pointer
• Record function (Min/Max)
• Display data hold function
• Back light
• Trigger switch
• 8:1 distance to spot ratio
• °C and °F selectable
• Gun-type compact design
• Operating lock function
• 9V battery and soft pouch included

Applications

• Heating & AC/R system measurements on all non-metallic and many metallic surfaces
• Troubleshoot overheating devices
• Remote Vent and return temperature measurements
• Tubing, piping and sheet metal temperature

377 Combination Non-contact (IR) and Contact Thermometer by Test Products International

Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

Features:

• Laser pointer
• Record function (Min/Max)
• Display data hold function
• Back light
• Trigger switch
• 8:1 distance to spot ratio
• °C and °F selectable
• Gun-type compact design
• Operating lock function
• 9V battery and soft pouch included

Applications

• Heating & AC/R system measurements on all non-metallic and many metallic surfaces
• Troubleshoot overheating devices
• Vent and return temperature measurements
• Tubing, piping and sheet metal temperature

384A Non-Contact Infrared Thermometer by Test Products International

Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

Measure Hard-to-reach, sensitive, or large moving target areas. Use the 380, 381, and 383 to measure surface temperature and watch the LCD immediately display accurate data without the use of a probe.

Features

• Easy to use single button operation
• 0.1 resolution for best reading (380/381)
• Last reading hold
• Soft holster pouch included
• 8:1 distance to spot ratio
• Large, easy to read display
• °C and °F selectable
• 9V battery included

Application

• Vent air and return temperature measurements
• Tubing, piping and sheet metal temperature
• Leaks around cooler or freezer doors

HVAC/R

• Compressor heads
• Vents
Insulation
• leaks around cooler or freezer doors
• Steam traps
• Registers

Food

• Grill & surface temperatures
• Holding cabinets
• serving temperatures
• storage temperatures

Electrical

• Cables
• circuit breakers
• connections
• machinery
• motors
• transformers

390 TDS/Salt Meter by Test Products International

Measure Total Dissolved Solids (TDS), salt and temperature for food, water quality and HVAC maintenance. Easy-to-read LCD display. Measures temperature, TDS concentration and salt levels in solutions.

The AC Volt 50 is a hand held device for determining the presence or absence of AC voltage in insulated wires, wall receptacles, fuses, junction boxes, switches, and any other voltage carrying electrical system. It is not necessary to disconnect the system in question because no contact is required for operation and current flow is not necessary to locate voltage. Simply touch the plastic tip to a connection point or move it along an insulated wire. If AC voltage is present, The AC Volt 50 will sound an audio alert and an LED light in the probe tip will glow bright red. The illumination will stop at a break in the circuit or wire, and this allows the AC sensor to be used as a troubleshooting instrument.

Applications

• Water: Test TDS levels to determine purity
• Food: Test the amount of salt in food, seafood, or processed foods
• Health: Monitor the amount of salt intake
• Water Filtration: Test for TDS to determine performance level of filtration systems
• Pools & Spas: Monitor TDS levels to prevent maintenance problems
• HVAC: Test condensate water in cooling tower and humidifier reservoir applications to prevent bacterial growth
• HVAC: Test TDS levels in make-up water to prevent scale formation, corrosion, and embrittlement
• HVAC: Reduce water and chemical consump tion in boilers and cooling towers
• HVAC: Determine when to perform blowdown and add make-up water
• HVAC: Prevent contamina tion and corrosion of control valves, heat exchangers, and steam traps
• HVAC: Verify automated TDS contollers are functioning properly
• HVAC: Prevent low quality wet steam generation in boilers due to foaming caused by high TDS levels

505 Digital Hand Tachometer by Test Products International

Use the 505 photo / contact tachometer to determine RPM and surface speed. The 505 is a combination photo and contact tachometer that also measures surface speeds of belts and wheels.

Features

• Non-contact (photo) and contact RPM and surface speed
• Wide Measuring Range: 0.5 to 30,000 RPM
• Last measurement, maximum measurement and minimum measurement automatically saved and recalled

Applications

• Measure motor input and output shaft speed
• Determine conveyor belt speed
• Confirm fan, motor, and gear RPM
• Measure RPM of flywheels and pumps
• Monitor pulley rotation RPM and turbine speeds

510 Solar Irradiance Meter by Test Products International

The TPI 510 is an easy to use, solar irradiance meter for measurement of not only solar radiation, but all measureable light sources including all visible light. The TPI Solar Meter is state of the art and easy to use. It is designed to measure solar power in W/m² or BTU (ft²*h).

Features

• Measure solar radiation (irradiance)
• Displays results in W/m² or BTU
• 0 to 1999 W/m2 (0 to 634 BTU) range
• Min / Max and Data hold functions
• Convenient, no need to adjust, data displayed clearly
• Measurable light sources, including all visible light
• Overload display "OL" when measurement is out of range
• Select either W/m² or BTU / (ft²*h) units

Applications

• Use to find the optimal angle of inclination for installing solar panels
• Measure light intensity through windows
• Determine the effectiveness of solar film / window tint
• Suitable for measuring the effectiveness of solar film
• Car windows light intensity measurement
• Optimal incident angle for solar panels
• Measurement of the sun s transmission through transparent and film glass

595C1 Digital Humidity Thermometer by Test Products International

Features

• Hot wire anemometer is required to accurately measure below 80 feet/minute
• Measure air velocity and temperature simultaneously
• Record & recall Max, Min, & Avg
• Data hold
• Auto power off (10 min.)
• Low battery display
• Multiple measuring units: (m/s, k/h, mile/h, knots, ft./min)
• Download to a computer using the RS-232 port and optional A500 cable
• 39" cable length, hard-wired

Applications:

• Building maintenance
• Computer rooms
• Heating & air conditioning systems
• Bakeries
• Humidistats calibration

605 Digital Vacuum Gauge by Test Products International

Single input vacuum gauge. 12,000 to 15 micron measurement range. 300 PSI over pressure. A safer instrument for your job.

The 605 vacuum gauge measures vacuum in Microns for accurate evacuation of refrigeration systems. Please follow manufacturers recommendations on all HVAC equipment.

Features:

• Single input with 12000 to 15 micron range.
• Seven units of measure: Microns, PSI, InHg, mBar, Pascals, Torr, mTorr.
• Display: 5 digit.
• Auto Off: Conserve battery power
• Built in hanging hook and back magnets.