Sensorex

TX10 pH/ORP Transmitter, 4-20mA, 110-220V AC, 1/8 Din by Sensorex

The TX10 and TX20 transmitter series offers a cost-effective, small footprint solution for pH and ORP process control. Save space in your panel with either of these 1/8 DIN size models. The simple and easy to understand user interface features a four button membrane keypad for quick set up and programming. The TX10 has an isolated, reversible 4-20mA current output, providing versatility for a wide range of process control applications. The TX20 features two sets of programmable on/off relays, allowing the device to control warning lights, alarms or other process control systems. Both models feature a large, clear LCD panel display for quick and easy reference to pH, or ORP, or temperature.

Features:

• Clear LCD displays pH or ORP and temperature
• Easy to install 1/8 DIN plastic enclosure
• Universal power supply input from 100-240VAC
• Automatic US and NIST buffer recognition
• Two sets of programmable on/off relays (TX20)
• Or isolated, reversible 4-20mA current output (TX10)

TX100 pH/ORP Loop Powered Transmitter, 4-20mA, VDC, 1/4 DIN by Sensorex

The TX100 pH/mV transmitter is a loop-powered 4-20mA transmitter with a wide range of useful features and programmable options. Five buffer choices are available in two-point calibration mode. The 4-20mA output is scaleable in pH or mV units and has 500V input to output isolation. Temperature is always displayed and is selectable in °C or °F. All stored parameters and calibration data are retained in the non-volatile memory during transmitter power down or power loss. A useful probe clean reminder icon flashes when it is time to clean the probe. Probe cleaning interval is user programmable from 1 to 250 days. The TX100 can be used for wall mounting, panel mounting, pipe mounting and DIN-rail mounting. Cable grips for inlet/outlet to box are included as well as all mounting hardware. The case meets NEMA and IP ratings for water resistance.

Features:

• Displays readings in pH or mV alongisde temperature
• Mounts on wall, panel, pipe or DIN-rail
• Simple, easy to read user interface
• Probe cleaning reminder for easy maintenance
• Stores calibration and other data in case of power loss
• Water resistant case included

TX105 pH/ORP Loop Powered 4-20mA Transmitter by Sensorex

Our TX105 is an isolated output 4-20mA industrial transmitter for reading pH or ORP sensors. Easily power the unit with available two-wire power supply loop. Ideal for connecting to a PLC for advanced control systems. Versatile mounting options for wall or panel mount. With a dual display LCD, monitoring both the measuring value and the temperature is simple. The TX105 is CE certified.

Features:

• Large LCD screen for easy reading
• Isolated 4-20 mA analog output
• Automatic temperature compensation
• Flexible mounting options

TX20 pH and ORP Controller, 2 Relays, 110-229V, 1/8 Din by Sensorex

The TX10 and TX20 transmitter series offers a cost-effective, small footprint solution for pH and ORP process control. Save space in your panel with either of these 1/8 DIN size models. The simple and easy to understand user interface features a four button membrane keypad for quick set up and programming. The TX10 has an isolated, reversible 4-20mA current output, providing versatility for a wide range of process control applications. The TX20 features two sets of programmable on/off relays, allowing the device to control warning lights, alarms or other process control systems. Both models feature a large, clear LCD panel display for quick and easy reference to pH, or ORP, or temperature.

Features:

• Clear LCD displays pH or ORP and temperature
• Easy to install 1/8 DIN plastic enclosure
• Universal power supply input from 100-240VAC
• Automatic US and NIST buffer recognition
• Two sets of programmable on/off relays (TX20)
• Or isolated, reversible 4-20mA current output (TX10)

TX2000 Intelligent pH & ORP Transmitter/Controller, 4-20mA, Relays, VAC,1/4 DIN by Sensorex

The TX2000 pH/mV is a full-featured pH or ORP controller.Simply power up your TX2000 with 110-240V AC power and you get a controller with a wide range of useful features: 2 relays, 1 wash control, 2 each 4-20mA outputs (pH & Temp or ORP & Temp).

Calibration is easy using maximum of 3 Tech or NIST buffers and can be password protected with a programmable security code.

Mounting choices include: wall or panel with all fittings included.

The large LCM display has auto-sense backlight and contrast setting function. Text and graphic illustrations provide user-friendly operation.

Features:

• 2 each Voltage isolated (500 V) 4-20mA Outputs (pH or ORP and Temperature)
• 2 adjustable Hi/Lo relays and contacts
• Large LCM display indicates pH or mV and Temperature simultaneously
• NEMA 4X, IP65 enclosure
• Sample averaging to enhance stability

TX2000RS Intelligent pH & ORP Transmitter/Controller, 4-20mA+Modbus, VAC, 1/4 DIN by Sensorex

The TX2000 pH/ORP Transmitter is a full-featured pH or ORP transmitter/controller. Simply power up your TX2000 with 110-240V AC power and you get a powerful transmitter/controller with a range of useful features:

• Two alarm or control relays
• One wash relay
• Two 4-20 mA current outputs (pH and temperature or ORP and temperature)

Features:

• Intelligent Advanced Graphic and Text Programming
• Large LCD display indicates pH or mV and Temperature simultaneously
• NEMA 4X, IP65 enclosure
• Sample averaging to enhance stability
• Solution Ground input eliminates reference ground potentials

TX3100 pH / ORP Transmitter, 1/2 Din by Sensorex

The TX3100 replaces the Sensorex TX3000 as our pH and ORP/mV monitoring instrument in a 1/2 DIN size.

This transmitter / controller can be used in a variety of water and wastewater monitoring applications, including industrial water and wastewater treatment, chemical processing, and environmental monitoring.

The TX3100 features brand new firmware and an updated user interface with user friendly text and graphical illustrations. This makes the instrument more intuitive to use compared with the older TX3000.

• Intelligent Graphic and Text Programming
• Large LCD display indicates pH or mV and temperature simultaneously
• NEMA 4X, IP65, 1/2 DIN enclosure
• Sample averaging to enhance stability
• Solution ground input eliminates reference ground potentials

UVT-LED-H-NA Handheld UV Transmittance Monitor with North America Power Supply, Carry Case and Cleaning Swab by Sensorex

Sensorex's UVT-LED transmittance monitors are the first UVT monitors in the world to use a UV-LED light source. This technology offers advantages over traditional mercury lamp UVT instrumentation, including stable output with zero warm up time. Field users will benefit from reduced maintenance: LED technology eliminates the need for replacement cuvettes or lamps.

Our UVT-LED-H Handheld UV Transmittance Monitor is ergonomic and lightweight at just 0.9 lbs (0.41 kg). Obtain incredibly accurate UV Transmittance data on water samples with easy one-button operation. Calibration is equally quick and easy, and only requires a small amount of deionized (DI) water. Designed for reliability in the field, the unit is built with a Nickel-Cadmium (NiCad) battery and can take up to 350 readings on a single charge.

Features:

• Ergonomic, lightweight, and portable
• Fast readings with zero warm up time
• Quick and easy calibration with DI water
• No replacement cuvettes or lamps
• Stable measurements driven by UV-C LED technology
• Take up to 350 measurements per battery charge

UVT-LED-H-WD Handheld UV Transmittance Monitor with World Power Supply, Carry Case & Cleaning Swab by Sensorex

Sensorex's UVT-LED transmittance monitors are the first UVT monitors in the world to use a UV-LED light source. This technology offers advantages over traditional mercury lamp UVT instrumentation, including stable output with zero warm up time. Field users will benefit from reduced maintenance: LED technology eliminates the need for replacement cuvettes or lamps.

Our UVT-LED-H Handheld UV Transmittance Monitor is ergonomic and lightweight at just 0.9 lbs (0.41 kg). Obtain incredibly accurate UV Transmittance data on water samples with easy one-button operation. Calibration is equally quick and easy, and only requires a small amount of deionized (DI) water. Designed for reliability in the field, the unit is built with a Nickel-Cadmium (NiCad) battery and can take up to 350 readings on a single charge.

Features:

• Ergonomic, lightweight, and portable
• Fast readings with zero warm up time
• Quick and easy calibration with DI water
• No replacement cuvettes or lamps
• Stable measurements driven by UV-C LED technology
• Take up to 350 measurements per battery charge

UVT-LED-SW Submersible UV Transmittance Monitor by Sensorex

Sensorex's UVT-LED transmittance monitors are the first UVT monitors in the world to use a UV-C LED light source. This technology offers advantages over traditional mercury lamp UVT instrumentation, including stable output with zero warm up time. The result is more accurate UVT measurements over a longer period of time, without the need for frequent recalibration or light source replacement.

Automatic Cleaning and Calibration

Maintenance is minimal thanks to our patented wiper technology, which delivers a swift cleaning cycle and automatic calibration to a quartz reference standard.

Effortless Installation or Retrofitting

We offer several different mounting kits - perfect for new installs in an open channel, retrofits for Hach⪚ models, or various in-line configurations using a sanitary connection.

Simple Connectivity

The sensor directly outputs a 4-20mA signal for tuning the power of a UV disinfection system or monitoring with a data logger.

• Stable measurements driven by UV-C LED technology
• Patented automatic cleaning and calibration
• Simple connectivity with direct 4-20mA output
• Reduced maintenance with no field servicable parts
• Continuous monitoring for UV disinfection control