Sensorex

B107 pH Buffer Solution, pH 7.00 Buffer (Yellow), 1 pint (473ml) by Sensorex

Sensorex supplies pH buffers as pre-mixed, ready-to-use, color-coded liquids.-- red (pH4.01), yellow (pH7.00) and blue (pH 10.00). All buffers are guaranteed accurate to within +/- 0.01 pH units @ 25 deg C. Available sizes include pints(473mL), quarts(946mL) and gallons(3.786L). Buffer labels include pH vs. temperature information for precise calibration. Custom buffers are also available on an OEM basis. Please contact Sensorex regarding your requirements.

Electrode storage solution is available in pint and gallon sizes. This is the same solution that is shipped with all pH electrodes and ensures electrodes are ready for immediate use. Storage solution is recommended for long-term electrode storage since it is not color-coded and will not impart any color to the electrode's reference junction.

Features:

• Choice of pH 4.01, pH 7.00 and pH 10.00 or custom formulations
• Pint, Quart and Gallon Sizes
• NIST Traceability Certificates Available at Additional Cost
• Private/OEM Labeling Capability
• Color-Coded for easy recognition

S645CD-ORP pH Sensor, Flat, CPVC, Side Stream by Sensorex

Side stream mountings are particularly useful in applications involving oily coating or moderately viscous materials. This mounting hardware allows the velocity past the electrode to be controlled in a predictable manner. In the 3/4 inch flow cell, restricted 1/4 inch flow channel, each GPM of flow provides two ft/sec past the flat electrode's sensing surface. Flow rates of three to five GPM provide adequate cleaning velocities. Exact control of flow rates is not required.

In viscous material applications the above flow rates may be difficult to achieve; however, lower rates still provide flow in shear to assure that fresh material is at the measuring surface.

• Quick disconnect design saves time and money
• Installs in seconds, no tools needed
• Flat surface design resists coating
• CPVC and PVDF construction
• Available with or without ATC elements

B125 ORP Calibration Kit by Sensorex

The B125 ORP Calibration kit can be used for a simple calibration of both pH and ORP sensors. Use this kit for pH calibration, then convert the pH buffers into stable ORP buffers by saturating with quinhydrone. The B125 ORP calibration kit is a complete, ready-to-use package and can be used for up to 30 calibrations.

Features:

• Simple calibration of pH and ORP simultaneously
• Fast response time
• Mix and prepare the calibration buffers in seconds
• Instantly ready for use and ships with plastic beakers and stirring sticks
• One year shelf life guaranteed

CLD502 Amperometric Chlorine Dioxide Sensor, 0-2 ppm, 4-20mA by Sensorex

The CLD series (chlorine dioxide sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for use with chlorine dioxide, pools, etc., these sensors are available in two ranges for detecting ppm level of chlorine dioxide. Choose the CLD502 for 0-2ppm and CLD510 for 0-10ppm of chlorine dioxide.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle Rinsing
• Irrigation water in agriculture

Sensors outpu a 4-20mA signal scaled to 0-2, 0-5, or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as replacement for other 4-20mA output CIO2 sensors. (Consult Sensorex for compatibility).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges 0-2 or 0-10ppm
• Built-In Temperature Compensation
• Large Electroylte Reservoir
• Replaceable Membrane and Electroylte

DO6400 Dissolved Oxygen Sensor, HDPE or PTFE, with Accessories by Sensorex

The DO6400 & 7400 series dissolved oxygen sensors feature a large capacity electrolyte holder, positive fit, easy to replace membrane and dependable galvanic cell technology for long term deployment. The body design ensures a good grip when wet. Ideal for Aquaculture and wastewater monitoring applications, these sensors require minimal maintenance. PTFE or High-Density Polyethylene (HDPE) membranes are available. 2 Replacement membranes, installation tool and electrolyte are included. Additional maintenance parts are in convenient kits (see ordering information). Sensors with mV output as well as built-in 4-20mA output in 0-100% and 0-200% saturation range are available. In addition, Modbus-485 output versions with 0-100% or 0-300% range are available.

Digital Communication for More Process Visibility:

• Modbus and 4-20 mA output options now available
• Con guration and calibration can be done using web based software

Easy to Install and Maintain

• Membranes can be replaced quickly
• Designed to have good grip even when sensor is wet

Long Lasting Life

• Proven and dependable galvanic cell technology with large solution capacity
• Replacement membranes, electrolyte, and installation tool are included

B130 pH Buffer Solution Kit, 1 Pt Each, B104+B107+B110 by Sensorex

Sensorex supplies pH buffers as pre-mixed, ready-to-use, color-coded liquids.-- red (pH4.01), yellow (pH7.00) and blue (pH 10.00). All buffers are guaranteed accurate to within +/- 0.01 pH units @ 25 deg C. Available sizes include pints(473mL), quarts(946mL) and gallons(3.786L). Buffer labels include pH vs. temperature information for precise calibration. Custom buffers are also available on an OEM basis. Please contact Sensorex regarding your requirements.

Electrode storage solution is available in pint and gallon sizes. This is the same solution that is shipped with all pH electrodes and ensures electrodes are ready for immediate use. Storage solution is recommended for long-term electrode storage since it is not color-coded and will not impart any color to the electrode's reference junction.

Features:

• Choice of pH 4.01, pH 7.00 and pH 10.00 or custom formulations
• Pint, Quart and Gallon Sizes
• NIST Traceability Certificates Available at Additional Cost
• Private/OEM Labeling Capability
• Color-Coded for easy recognition

CS675 High Temp & Pressure Stainless Steel Contacting Conductivity Sensor by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

B210 pH Buffer Solution, pH 10.00 Buffer, (Blue) 1 Quart by Sensorex

Sensorex supplies pH buffers as pre-mixed, ready-to-use, color-coded liquids.-- red (pH4.01), yellow (pH7.00) and blue (pH 10.00). All buffers are guaranteed accurate to within +/- 0.01 pH units @ 25 deg C. Available sizes include pints(473mL), quarts(946mL) and gallons(3.786L). Buffer labels include pH vs. temperature information for precise calibration. Custom buffers are also available on an OEM basis. Please contact Sensorex regarding your requirements.

Electrode storage solution is available in pint and gallon sizes. This is the same solution that is shipped with all pH electrodes and ensures electrodes are ready for immediate use. Storage solution is recommended for long-term electrode storage since it is not color-coded and will not impart any color to the electrode's reference junction.

Features:

• Choice of pH 4.01, pH 7.00 and pH 10.00 or custom formulations
• Pint, Quart and Gallon Sizes
• NIST Traceability Certificates Available at Additional Cost
• Private/OEM Labeling Capability
• Color-Coded for easy recognition

TX100 pH/ORP Loop Powered Transmitter, 4-20mA, VDC, 1/4 DIN by Sensorex

The TX100 pH/mV transmitter is a loop-powered 4-20mA transmitter with a wide range of useful features and programmable options. Five buffer choices are available in two-point calibration mode. The 4-20mA output is scaleable in pH or mV units and has 500V input to output isolation. Temperature is always displayed and is selectable in °C or °F. All stored parameters and calibration data are retained in the non-volatile memory during transmitter power down or power loss. A useful probe clean reminder icon flashes when it is time to clean the probe. Probe cleaning interval is user programmable from 1 to 250 days. The TX100 can be used for wall mounting, panel mounting, pipe mounting and DIN-rail mounting. Cable grips for inlet/outlet to box are included as well as all mounting hardware. The case meets NEMA and IP ratings for water resistance.

Features:

• Displays readings in pH or mV alongisde temperature
• Mounts on wall, panel, pipe or DIN-rail
• Simple, easy to read user interface
• Probe cleaning reminder for easy maintenance
• Stores calibration and other data in case of power loss
• Water resistant case included

FCL505-MB2 Free Chlorine Sensor, 0-5 ppm MB 485 24V by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte Reservoir
• Replaceable Membrane and Electrolyte

S222C pH Sensor, 12mm, Polymer, Quick Disconnect by Sensorex

This series of electrodes is designed to provide an economical multi-purpose solution for in-line or submersion pH measurements. Based on our proven S200C bulb and S350CD flat surface pH glass technology, these rugged and durable electrodes are available in Ryton nipples with 1/2" or 3/4" NPT threads; or in our durable epoxy body with or without quick disconnect top caps.

Choose from single or double junction designs, flat or recessed measuring surface configurations and cable lengths and connectors as required.

• Economical design for in-line or submersion use
• Choose from single or double junction models
• Threaded 1/2" or 3/4" NPT connections
• Choose from spherical or flat pH measuring surfaces
• Special models for low ionic and other specialty applications available

B207 pH Buffer Solution, pH 7.00 Buffer, (Yellow) 1 Quart by Sensorex

Sensorex supplies pH buffers as pre-mixed, ready-to-use, color-coded liquids.-- red (pH4.01), yellow (pH7.00) and blue (pH 10.00). All buffers are guaranteed accurate to within +/- 0.01 pH units @ 25 deg C. Available sizes include pints(473mL), quarts(946mL) and gallons(3.786L). Buffer labels include pH vs. temperature information for precise calibration. Custom buffers are also available on an OEM basis. Please contact Sensorex regarding your requirements.

Electrode storage solution is available in pint and gallon sizes. This is the same solution that is shipped with all pH electrodes and ensures electrodes are ready for immediate use. Storage solution is recommended for long-term electrode storage since it is not color-coded and will not impart any color to the electrode's reference junction.

Features:

• Choice of pH 4.01, pH 7.00 and pH 10.00 or custom formulations
• Pint, Quart and Gallon Sizes
• NIST Traceability Certificates Available at Additional Cost
• Private/OEM Labeling Capability
• Color-Coded for easy recognition

S653/20/BTD S600 S600 Series Cable, CPVC, 20ft, BTD BNC by Sensorex

With threading for submersion mounting, the S653 Cable Assembly is the perfect complement to our S651CD Submersible Electrode series. This cable assembly is designed to submerge the electrode in tanks, flumes and sewer lines. The cost-effective CPVC construction is well suited for most water and wastewater applications. Pairing the S653 Cable Assembly with an S651CD series Electrodes allows for quick electrode changes, drastically reducing downtime due to maintenance.

• Use with one of our S651CD series Electrodes for quick and easy maintenance
• Threading design for fast and simple installation
• Durable CPVC design is suitable for most applications
• One year limited warranty