Laboratory Sensors & Instrumentation, Sensorex

S222C pH Sensor, 12mm, Polymer, Quick Disconnect by Sensorex

This series of electrodes is designed to provide an economical multi-purpose solution for in-line or submersion pH measurements. Based on our proven S200C bulb and S350CD flat surface pH glass technology, these rugged and durable electrodes are available in Ryton nipples with 1/2" or 3/4" NPT threads; or in our durable epoxy body with or without quick disconnect top caps.

Choose from single or double junction designs, flat or recessed measuring surface configurations and cable lengths and connectors as required.

• Economical design for in-line or submersion use
• Choose from single or double junction models
• Threaded 1/2" or 3/4" NPT connections
• Choose from spherical or flat pH measuring surfaces
• Special models for low ionic and other specialty applications available

S645CD pH Sensor, Flat, CPVC, Side Stream by Sensorex

Side stream mountings are particularly useful in applications involving oily coating or moderately viscous materials. This mounting hardware allows the velocity past the electrode to be controlled in a predictable manner. In the 3/4 inch flow cell, restricted 1/4 inch flow channel, each GPM of flow provides two ft/sec past the flat electrode's sensing surface. Flow rates of three to five GPM provide adequate cleaning velocities. Exact control of flow rates is not required.

In viscous material applications the above flow rates may be difficult to achieve; however, lower rates still provide flow in shear to assure that fresh material is at the measuring surface.

• Quick disconnect design saves time and money
• Installs in seconds, no tools needed
• Flat surface design resists coating
• CPVC and PVDF construction
• Available with or without ATC elements

ORP1000 Polycarbonate Laboratory ORP Sensor, SJ, Yellow BNC by Sensorex

The ORP1000 polycarbonate ORP sensor performs reliably in applications such as swimming pool monitoring and aquarium monitoring. Durable construction ensures this sensor stands up to the usual wear and tear.

Features:

• Choose basic, advanced, or premium options based on your application
• Virtually unbreakable with durable polycarbonate or Ultem® bodies
• Compatible with any meter accepting a BNC
• Accurate and reliable REDOX potential measurements
• Instantly ready for use: Extended shelf life (guaranteed for one year)
• One year limited warranty

DO6400 Dissolved Oxygen Sensor, HDPE or PTFE, with Accessories by Sensorex

The DO6400 & 7400 series dissolved oxygen sensors feature a large capacity electrolyte holder, positive fit, easy to replace membrane and dependable galvanic cell technology for long term deployment. The body design ensures a good grip when wet. Ideal for Aquaculture and wastewater monitoring applications, these sensors require minimal maintenance. PTFE or High-Density Polyethylene (HDPE) membranes are available. 2 Replacement membranes, installation tool and electrolyte are included. Additional maintenance parts are in convenient kits (see ordering information). Sensors with mV output as well as built-in 4-20mA output in 0-100% and 0-200% saturation range are available. In addition, Modbus-485 output versions with 0-100% or 0-300% range are available.

Digital Communication for More Process Visibility:

• Modbus and 4-20 mA output options now available
• Con guration and calibration can be done using web based software

Easy to Install and Maintain

• Membranes can be replaced quickly
• Designed to have good grip even when sensor is wet

Long Lasting Life

• Proven and dependable galvanic cell technology with large solution capacity
• Replacement membranes, electrolyte, and installation tool are included

S265C-ORP ORP Sensor, Platinum, 1/2" NPT, PPS by Sensorex

This series of electrodes is designed to provide an economical multi-purpose solution for in-line or submersion ORP measurements. Based on our proven S500C-ORP polished tip or S550C-ORP extended tip or S350CD-ORP flat surface technology, these rugged and durable electrodes are available in Ryton nipples with 1/2" or 3/4" NPT threads; or in our durable epoxy body with or without quick disconnect top caps. Choose from single or double junction designs, flat or recessed measuring surfaces, and cable lengths and connectors as required.

• Economical design for in-line or submersion use
• Choose from single or double junction models
• Threaded 1/2" or 3/4" NPT connections
• High purity platinum measuring surfaces
• Special models for low ionic and other specialty applications available

S265C pH Sensor, Bulb, 1/2" NPT, PPS by Sensorex

This series of electrodes is designed to provide an economical multi-purpose solution for in-line or submersion pH measurements. Based on our proven S200C bulb and S350CD flat surface pH glass technology, these rugged and durable electrodes are available in Ryton nipples with 1/2" or 3/4" NPT threads; or in our durable epoxy body with or without quick disconnect top caps. Choose from single or double junction designs, flat or recessed measuring surface configurations and cable lengths and connectors as required.

• Economical design for in-line or submersion use
• Choose from single or double junction models
• Threaded 1/2" or 3/4" NPT connections
• Choose from spherical or flat pH measuring surfaces
• Special models for low ionic and other specialty applications available

S200C pH Sensor, 12mm, Polymer by Sensorex

The Sensorex S200C is one of our most popular laboratory pH electrodes, due to its reliability and low maintenance design. The pH1600 replaces the S200C/BNC pH probe and has the same design, but features a new Ultem® body for superior chemical compatibility. This pH probe performs to the same specifications compared to the Sensorex S200C and is instantly ready for use as a direct fit replacement.

• New Sensorex S200C
• Durable and chemically compatible Ultem® or body
• Reliable and accurate over the full range of pH measurements
• No refilling or maintenance required with sealed gel-filled design
• Instantly ready for use, and has one year guaranteed shelf life
• One year limited warranty

S660CD pH Sensor, Flat, CPVC, for 3/4" by Sensorex

In-line mountings are ideal for replacing existing threaded electrodes. They are useful in piping systems where flow can be shut off for electrode maintenance and where flow rates match the application's needs; for example, turbulent flow is needed in self-cleaning applications. A simple, reusable gland is used to mount the electrode. Electrodes, glands and flow cells are available to fit 3/4", 1" and 2" lines. Mounting hardware is available with or without ATC elements. Choose from standard electrode models with HT gels, low ionic models and HF resistant models.

• Quick disconnect design saves time and money
• Installs in seconds, no tools necessary
• Flat-surface design resists coating
• Available with or without ATC elements

S662CD pH Sensor, Flat, CPVC, for 2" by Sensorex

In-line mountings are ideal for replacing existing threaded electrodes. They are useful in piping systems where flow can be shut off for electrode maintenance and where flow rates match the application's needs; for example, turbulent flow is needed in self-cleaning applications. A simple, reusable gland is used to mount the electrode. Electrodes, glands and flow cells are available to fit 3/4", 1" and 2" lines. Mounting hardware is available with or without ATC elements. Choose from standard electrode models with HT gels, low ionic models and HF resistant models.

• Quick disconnect design saves time and money
• Installs in seconds, no tools necessary
• Flat-surface design resists coating
• Available with or without ATC elements

pH2000 Extended Life Laboratory pH Sensor, Ultem, DJ, Clear BTD BNC by Sensorex

Applications such as environmental and wastewater sampling involve some uncertainty about what samples may contain. When dealing with unknown or unpredictable sample types, you need a pH probe you can trust to deliver accurate measurements regardless of the contaminants you encounter. The pH2000 (formerly S200CD) has a double junction reference design to prevent reference fouling by heavy metals and other sample contaminants. When you travel to remote sites to collect data, it is especially important that obtaining the measurements you need is hassle free. The pH2000 features an Ultem® body and a booted meter connection for durability you can trust in the field.

Features:

• Durable and low maintenance
• Ideal for testing unknown sample types
• Accurate measurements across the full pH scale (0-14)
• Instantly ready for use straight out of the box
• Compatible with any meter accepting a BNC connector

S269CD pH Sensor, Flat, 3/4" NPT, PPS, DJ by Sensorex

This series of electrodes is designed to provide an economical multi-purpose solution for in-line or submersion pH measurements. Based on our proven S200C bulb and S350CD flat surface pH glass technology, these rugged and durable electrodes are available in Ryton nipples with 1/2" or 3/4" NPT threads; or in our durable epoxy body with or without quick disconnect top caps. Choose from single or double junction designs, flat or recessed measuring surface configurations and cable lengths and connectors as required.

• Economical design for in-line or submersion use
• Choose from single or double junction models
• Threaded 1/2" or 3/4" NPT connections
• Choose from spherical or flat pH measuring surfaces
• Special models for low ionic and other specialty applications available

S200C/STD pH Sensor, 12mm, Polymer, 1M, US Std by Sensorex

The Sensorex S200C is one of our most popular laboratory pH electrodes, due to its reliability and low maintenance design. The pH1600 replaces the S200C/BNC pH probe and has the same design, but features a new Ultem® body for superior chemical compatibility. This pH probe performs to the same specifications compared to the Sensorex S200C and is instantly ready for use as a direct fit replacement.

• New Sensorex S200C
• Durable and chemically compatible Ultem® or body
• Reliable and accurate over the full range of pH measurements
• No refilling or maintenance required with sealed gel-filled design
• Instantly ready for use, and has one year guaranteed shelf life
• One year limited warranty

DO7442TC/T DO Sensor Lead Anode, 10ft, TL, TC= by Sensorex

Your Dissolved Oxygen (DO) sensor is a galvanic electrochemical device; i.e. it does not require power from your meter or controller to generate its signal. The DO sensor will provide a millivolt signal proportional to the concentration of oxygen in the water (model DO7400, DO7400TC) or 4-20mA current output (models DO7441 and DO7442). The signal output is proportional to ppm of oxygen for probes with millivolt signal output or changes linearly with ppm of oxygen sensors with 4-20mA output. The partial pressure of oxygen, which is directly proportional to the percent saturation of oxygen in a specified sample, can be calculated based upon the oxygen solubility which is a function of temperature, salinity, total atmospheric pressure, etc.

Your Dissolved Oxygen sensor consists of an cathode, anode and an electrolyte separated from your process fluid by an oxygen permeable membrane. The oxygen passing through the membrane reacts at the cathode, giving up electrons, which produces an electrical current.