Installation Hardware & Accessories, Sensorex

S855 S8000 ATC Cable, Quick Disconnect by Sensorex

The 855 is a shielded, low-noise cable assembly for our S8000 series pH and ORP sensors. This cable assembly has 3/4" NPT thread for inline or submersion installations.

FM001 Flow Meter, 0.1-1.0 gpm (.5-4.0Lpm) by Sensorex

Our FM001 Water Flow Regulator allows for simple flow control. It is recommended for usage with the FCL Series Free Chlorine Sensors and CLD Series Chlorine Dioxide Sensors when integrated with the FC72 Flow Cell. This Flow Regulator provides precision flow control from 0.1 to 1.0 gpm (0.5 to 4.0 l/min) with a 94% accuracy rate (full-scale range).

• Facilitates high-accuracy measurements: Controls flow for optimal measurement of free chlorine and/or chlorine dioxide
• Precision flow control: Controls flow from 0.1 to 1.0 gpm with a 94% accuracy
• Simple installation: Integrate the flow regulator into your system in less than 5 minutes
• One year limited warranty: We stand behind all our products with the Sensorex Guarantee

S855/20/TL/TL S8000 ATC Cable, 20ft, TL/TL by Sensorex

The 855 is a shielded, low-noise cable assembly for our S8000 series pH and ORP sensors. This cable assembly has 3/4" NPT thread for inline or submersion installations.

S653/20/TL S600 Series Cable, CPVC, 20ft, TL by Sensorex

With threading for submersion mounting, the S653 Cable Assembly is the perfect complement to our S651CD Submersible Electrode series. This cable assembly is designed to submerge the electrode in tanks, flumes and sewer lines. The cost-effective CPVC construction is well suited for most water and wastewater applications. Pairing the S653 Cable Assembly with an S651CD series Electrodes allows for quick electrode changes, drastically reducing downtime due to maintenance.

• Use with one of our S651CD series Electrodes for quick and easy maintenance
• Threading design for fast and simple installation
• Durable CPVC design is suitable for most applications
• One year limited warranty

S653 S600 Series Cable, CPVC, Quick Disconnect by Sensorex

With threading for submersion mounting, the S653 Cable Assembly is the perfect complement to our S651CD Submersible Electrode series. This cable assembly is designed to submerge the electrode in tanks, flumes and sewer lines. The cost-effective CPVC construction is well suited for most water and wastewater applications. Pairing the S653 Cable Assembly with an S651CD series Electrodes allows for quick electrode changes, drastically reducing downtime due to maintenance.

• Use with one of our S651CD series Electrodes for quick and easy maintenance
• Threading design for fast and simple installation
• Durable CPVC design is suitable for most applications
• One year limited warranty

S853 S8000 Cable, Quick Disconnect, Coax by Sensorex

The 853 is a shielded, low-noise cable assembly for our S8000 series pH and ORP sensors. This cable assembly has 3/4" NPT thread for inline or submersion installations.

S855/10/TL/TL S8000 ATC Cable, 10ft, TL/TL by Sensorex

The 855 is a shielded, low-noise cable assembly for our S8000 series pH and ORP sensors. This cable assembly has 3/4" NPT thread for inline or submersion installations.

S653/10/BNC S600 Series Cable, CPVC, 10ft(3M), BNC by Sensorex

With threading for submersion mounting, the S653 Cable Assembly is the perfect complement to our S651CD Submersible Electrode series. This cable assembly is designed to submerge the electrode in tanks, flumes and sewer lines. The cost-effective CPVC construction is well suited for most water and wastewater applications. Pairing the S653 Cable Assembly with an S651CD series Electrodes allows for quick electrode changes, drastically reducing downtime due to maintenance.

• Use with one of our S651CD series Electrodes for quick and easy maintenance
• Threading design for fast and simple installation
• Durable CPVC design is suitable for most applications
• One year limited warranty

S853/20/BNC S8000 Cable, Coax, 20ft, BNC by Sensorex

The 853 is a shielded, low-noise cable assembly for our S8000 series pH and ORP sensors. This cable assembly has 3/4" NPT thread for inline or submersion installations.

SDA-7010 Salt Bridge for SD7000CD &-ORP, 10 each by Sensorex

The SDA differential sensor salt bridge replacements extend the lifetime for SD7000 differential pH and ORP (REDOX) sensors. Also compatible with other brands, including Hach* and Water Analytics.* Available in single unit or pack of three (3) units. Also order SDS-7050 (standard cell refill solution, 500mL) when replacing salt bridges.

Features:

• Extends life of differential pH & ORP sensors: Replaceable reference junction for challenging applications
• Direct-fit Compatibility: Replacement sensor for several popular Hach & Water Analytics models
• One year limited warranty: We stand behind all our products with the Sensorex Guarantee

S653/20/BNC S600 Series Cable, CPVC, 20ft, BNC by Sensorex

With threading for submersion mounting, the S653 Cable Assembly is the perfect complement to our S651CD Submersible Electrode series. This cable assembly is designed to submerge the electrode in tanks, flumes and sewer lines. The cost-effective CPVC construction is well suited for most water and wastewater applications. Pairing the S653 Cable Assembly with an S651CD series Electrodes allows for quick electrode changes, drastically reducing downtime due to maintenance.

• Use with one of our S651CD series Electrodes for quick and easy maintenance
• Threading design for fast and simple installation
• Durable CPVC design is suitable for most applications
• One year limited warranty

S855/20/BNC/TL S8000 ATC Cable, 20ft, BNC/TL by Sensorex

The 855 is a shielded, low-noise cable assembly for our S8000 series pH and ORP sensors. This cable assembly has 3/4" NPT thread for inline or submersion installations.

FC72 Flow Cell for Free Chlorine (FCL) and Chlorine Dioxide (CLD) Sensors by Sensorex

Our FC72 flow cell facilitates high-accuracy measurements of free chlorine and chlorine dioxide by preventing air bubble formation on the sensor membrane while maintaining laminar flow across the membrane. Compatible with FCL Series Free Chlorine Sensors and CLD Series Chlorine Dioxide Sensors.

• Facilitates high-accuracy measurements: Maintains laminar flow through the system while preventing air bubbles for measurement accuracy
• Simple Sensor Installation: Configure your free chlorine or chlorine dioxide sensor in the flow cell in less than 5 minutes
• Compatible with a wide variety of sensors: For use with Sensorex FCL Series Free Chlorine and CLD Series Chlorine Dioxide Sensors
• One year limited warranty: We stand behind all our products with the Sensorex Guarantee

SDA-7003 Salt Bridge for SD7000CD &-ORP, 3 each by Sensorex

The SDA differential sensor salt bridge replacements extend the lifetime for SD7000 differential pH and ORP (REDOX) sensors. Also compatible with other brands, including Hach* and Water Analytics.* Available in single unit or pack of three (3) units. Also order SDS-7050 (standard cell refill solution, 500mL) when replacing salt bridges.

Features:

• Extends life of differential pH & ORP sensors: Replaceable reference junction for challenging applications
• Direct-fit Compatibility: Replacement sensor for several popular Hach & Water Analytics models
• One year limited warranty: We stand behind all our products with the Sensorex Guarantee

SDA-7001 Salt Bridge for SD7000CD &-ORP, 1 each by Sensorex

The SDA differential sensor salt bridge replacements extend the lifetime for SD7000 differential pH and ORP (REDOX) sensors. Also compatible with other brands, including Hach* and Water Analytics.* Available in single unit or pack of three (3) units. Also order SDS-7050 (standard cell refill solution, 500mL) when replacing salt bridges.

Features:

• Extends life of differential pH & ORP sensors: Replaceable reference junction for challenging applications
• Direct-fit Compatibility: Replacement sensor for several popular Hach & Water Analytics models
• One year limited warranty: We stand behind all our products with the Sensorex Guarantee

FC75C 12mm Sensor 3/4" NPT Install Kit with Tee by Sensorex

Our FC75C Flow Cell Kit is an easy and economical means for mounting pH sensors for in-line applications. Compatible with all 12mm electrodes, including S222CD Light-Duty Online Process pH Sensor.