$750 - $1000, Test and Measurement, ScichemTech

SCT-108.002.08 SCT CADE Conductivity/TDS/Salinity/Resistivity/DO/Temp Meter by ScichemTech

Includes:

• Plastic conductivity electrode
• DO electrode
• 1413us/cm conductivity standard solution
• Membrane cap (DO electrode use)
• DO electrode inner solution
• Cathode polishing paper
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for conductivity and dissolved oxygen measurements.
• Double-parameter meter equipped with conductivity electrode and dissolved oxygen electrode, automatic identification of electrode by meter.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, automatic power-off and low voltage display.
• Automatic identification of 7 conductivity standard calibration solutions, two options of standard calibration solutions: Europe and America series.
• Adopt advanced conductivity measurement technology, use conductivity electrode of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.002.10 SCT DAVY pH/ORP/Conductivity/TDS/Salinity/Resistivity/DO/Temp Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combined electrode
• Plastic conductivity electrode
• DO electrode
• pH standard buffer solution
• 1413 us/cm conductivity standard solution
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for pH, ORP, conductivity/TDS/salinity/resistivity/dissolved oxygen and temp. measurements.
• Multi-parameter meter, equipped with pH electrode, conductivity electrode and dissolved oxygen electrode, automatic identification of electrode by meter.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, self-diagnose information, automatic power-off and low voltage display.
• Automatic identification of 12 pH standard buffer solutions, three options of standard buffer solutions: Europe and America series & nist series.
• Able to set pH measurement modes of high purity water and pure water with ammonia.
• Automatic identification of 7 conductivity standard calibration solutions, two options of standard calibration solutions: Europe and America series.
• Adopt advanced conductivity measurement technology, use conductivity electrode of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.003.05 SCT BEN-pH-5 Precision pH/ORP/Temp Meter by ScichemTech

SCT precision pH/ORP/Temp meter suitable for precise pH measurements for research and quality control.

(Resolution 0.001 pH)

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• Glass pH combination electrode
• Temperature electrode
• pH standard buffer solution pH 4.00, 7.00, 10.01 (50 ml)
• 9v power adapter
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 12 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series.
• High purified water and ammonia added purified water ph measuring mode can be set up.
• With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards

SCT-108.003.12 SCT-BEN-CON-2 GLP Benchtop Conductivity Meter by ScichemTech

SCT GLP conductivity benchtop meter suitable for normal conductivity measurement.

Advanced and original conductivity measurement technology wide measurement range, high accuracy, conductivity measurement mode can be switch to TDS, salinity and resistivity.

Instrument resolution 1.0.

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• 1413 us/cm conductivity standard solution
• 9V power adapter
• Rs-232 communication cable
• Communication software cd
• Operation manual
• Packing list

Features:

• SCT benchtop meter is designed to measure conductivity and temperature.
• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Equips conductivity/ATC electrode. Its measurement result is fast and precise.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Ability to switch among conductivity,TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.13 SCT-BEN-CON-3 Precision Benchtop Conductivity Meter by ScichemTech

Sct precision benchtop conductivity meter for precision conductivity Measurement of research and quality control.

With wide measurement range, high accuracy conductivity measurement Mode can be switch to TDS, salinity and resistivity.

Instrument resolution 1.0

Includes:

• Flexible electrode holder
• Plastic three-in-one combination electrode
• 1413 us/cm conductivity standard solution (50 ml)
• 9v power adapter
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT bench precision conductivity meter, suitable for high precision conductivity measurement of science research and quality control, with accuracy 0.5%.
• Equips conductivity/ATC glass electrode. Its measurement result is fast and precise. Can choose 25°c, 20°c and 18°c three kinds of basis temperature.
• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 7 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series
• Equipped conductivity/ATC electrode for quick and precise results.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets : ISO9001 & CE standards.

SCT-108.003.19 SCT-BEN-HARD-1 Benchtop Water Hardness Meter by ScichemTech

Includes:

• Water hardness electrode stirring type electrode holder
• Water hardness calibration solution (B1,B2 & B23) 20 ml
• Test cup pedestal in a solution for water hardness electrode tools for filling reference solution
• WH - link communication software
• RS-232 communication cable
• Operation manual

Features:

• SCT benchtop meter is for measurement of water hardness (the total concentration of calcium ion and magnesium ion).
• Electrode adopts water hardness combination electrode with patent structure. It consists of measurement electrode, reference electrode and temperature probe. Replaceable measuring head, steady potential, fast response, easy to use.
• Meter adopts intelligent chip design, automatic calibration, automatic temperature compensation, time display, data storage RS232 output, etc.
• Ability to switch among eight units: mmol/l, mg/l (caco3), mg/l (cao), mmol/l (boiler) and mg/l (ca). Three options of three units: °FH France °DH Germany and °EH UK from WH-link communication software
• Equipped with B1 B2 and B3 calibration solutions.
• Equipped with WH-link communication software, connect testing data of meter to computer.
• SCT benchtop meter meets: ISO9001 & CE standards.