$1000 - $2000, Tents & Shelters - Ground Tents with Added Features, Pelsue

65068A "HIGH-5" Ground Tent, 6' x 6' x 8' High, 1/2 Moon Zip Door Rear by Pelsue

Tent measures 6' x 6' x 8' high. Ideal for use over industrial tripod or davit retrieval hoists. May be used to cover pad or pole mounted cabinets or anywhere that additional height is required. Rear Access 1/2 moon style zipper door included. Door style velcro slit and 8" diameter heater/ventilator hose sleeve.

6508DRADSB Dual-Entry Series - roll-up rear access door, 8' W x 8' L x 6.5' H by Pelsue

The Pelsue Dual-Entry Series improves upon the Interlocking Series by adding a rear-access door for easy entry and exit when the front of the tent is closed off. This allows for greater access to work on a cabinet/box when two tents are connected together, or when the tent is attached to a work vehicle.

• Rear-access Door
• Easy Set Up
• Interlocking Doors
• Clips and D-rings with interlocking flaps
• 30" wide dual zipper roll-up rear-access door
• Heavy-duty frame
• Roll-up front flaps
• 8" side ventilation hose entry sleeve
• 2 screen windows with roll-up flaps
• 3 tie-down cords through the hubs
• 7 stakes and 4 ground loops
• Carrying case

6508DRAD Ground Tent 6508D with Roll Up Rear Access Door by Pelsue

DRAD tents incorporate the standard features found in the Pelsue "D" series ground tents, along with a 30" wide roll-up rear door for personnel entry and exit. It is ideal for working up against any type of cabinet. The tent also doubles as a standalone ground tent for construction or splicing.

Also can be used in conjunction with same size D series tent.

6508DCS Ground Tent 6508D with Cable Slot in Rear Wall by Pelsue

DCS Model ground tents feature a vertical slit in the rear wall, from the hub to the ground. Slit is closed over by means of a "Velcro" style closure and a hook & ring assembly. Used to allow entry of cable or pipe when doing fusion or splicing in the tent. Includes vent sleeve.

6510DRAD Ground Tent 6510D, roll Up Rear Access Door by Pelsue

DRAD tents incorporate the standard features found in the Pelsue "D" series ground tents, along with a 30" wide roll-up rear door for personnel entry and exit. It is ideal for working up against any type of cabinet. The tent also doubles as a standalone ground tent for construction or splicing.

Also can be used in conjunction with same size D series tent.

6508DSB Interlocking Series Work Tent - yellow and white, 8' x 8' x 6.5' H, with case by Pelsue

The interlocking flaps allow you to connect two tents together, or attach the tent to a work vehicle. The interlocking flaps are a great way to get extra functionality out of your tent.

• Easy Set Up
• Interlocking Doors
• Clips & D-rings with interlocking flaps
• Rear 8" ventilation hose entry sleeve
• Heavy-duty frame
• 2 screen windows with roll-up flaps
• 3 tie-down cords through the hubs
• 7 stakes and 4 ground loops
• Carrying case

6508SBRS SolarShade Work Shelter - 8' W x 8' L x 6.5' H, with case by Pelsue

The Pelsue SolarShade® Work Shelter can be rapidly deployed, and creates instant shade. Three sides of the tent have full-size, roll-up mesh windows for maximum ventilation. The SolarShade® Series tents use a special solar blocking material, which prevents solar gain, so the tent stays cooler compared to the typical fabrics used in most other tents.

The SolarShade® Series tents are specially designed with a solar blocking material throughout the interior. The material helps blocks solar gain as well as unwanted light. This allows the tent to be deployed in hot weather environments, where the tent acts like a shade tree.

• Portable instant shade
• Blocks solar gain
• Sides roll up
• Solar blocking material on all surfaces
• Roll-up front door with double-sided zippers
• 3 mesh sides to allow for ventilation
• Removable fly for blocking late afternoon sun
• Roll-up front door and windows
• Tie-down cords for extra support
• 7 stakes and 4 ground loops
• Carrying case

6506SBRS SolarShade Work Shelter - 6' W x 6' L x 6.5' H, with case by Pelsue

The Pelsue SolarShade® Work Shelter can be rapidly deployed, and creates instant shade. Three sides of the tent have full-size, roll-up mesh windows for maximum ventilation. The SolarShade® Series tents use a special solar blocking material, which prevents solar gain, so the tent stays cooler compared to the typical fabrics used in most other tents.

The SolarShade® Series tents are specially designed with a solar blocking material throughout the interior. The material helps blocks solar gain as well as unwanted light. This allows the tent to be deployed in hot weather environments, where the tent acts like a shade tree.

• Portable instant shade
• Blocks solar gain
• Sides roll up
• Solar blocking material on all surfaces
• Roll-up front door with double-sided zippers
• 3 mesh sides to allow for ventilation
• Removable fly for blocking late afternoon sun
• Roll-up front door and windows
• Tie-down cords for extra support
• 7 stakes and 4 ground loops
• Carrying case

6506SRS Shade Tent. 6' x 6' Reflective Stripe by Pelsue

With increasing heat stress-related injuries and deaths on the work site, the need for shade during breaks has become imperative. The Pelsue Shade Tent provides portable instant shade. Using time proven Pelsue tent technology, the shade tent offers on site shade for work crews. The tent is easy to set up and has a rugged construction. Multiple sizes are available

• Provides portable shade - sets up in seconds
• Industrial strength - made for daily commercial use
• Pops up in seconds - no loose parts or finger pinching frames
• Opaque roof fabric - also used in airplane windshield covers!
• Three mesh sides provide ventilation
• Removable fly for blocking late afternoon sun
• Carry case included
• Custom colors & branding available
• Can be set up in 24 seconds

MEETS CALIFORNIA OSHA STANDARDS

Title 8 Section 3395 subsection D1 (d) Access to shade. (1) Shade required to be present when the temperature exceeds 85 degrees Fahrenheit. When the outdoor temperature in the work area exceeds 85 degrees Fahrenheit, the employer shall have and maintain one or more areas with shade at all times while employees are present that are either open to the air or provided with ventilation or cooling. The amount of shade present shall be at least enough to accommodate 25% of the employees on the shift at any time, so that they can sit in a normal posture fully in the shade without having to be in physical contact with each other. The shaded area shall be located as close as practicable to the areas where employees are working.

6508SRS Shade Tent. 8' x 8' Reflective Stripe by Pelsue

With increasing heat stress-related injuries and deaths on the work site, the need for shade during breaks has become imperative. The Pelsue Shade Tent provides portable instant shade. Using time proven Pelsue tent technology, the shade tent offers on site shade for work crews. The tent is easy to set up and has a rugged construction. Multiple sizes are available

• Provides portable shade - sets up in seconds
• Industrial strength - made for daily commercial use
• Pops up in seconds - no loose parts or finger pinching frames
• Opaque roof fabric - also used in airplane windshield covers!
• Three mesh sides provide ventilation
• Removable fly for blocking late afternoon sun
• Carry case included
• Custom colors & branding available
• Can be set up in 24 seconds

MEETS CALIFORNIA OSHA STANDARDS

Title 8 Section 3395 subsection D1 (d) Access to shade. (1) Shade required to be present when the temperature exceeds 85 degrees Fahrenheit. When the outdoor temperature in the work area exceeds 85 degrees Fahrenheit, the employer shall have and maintain one or more areas with shade at all times while employees are present that are either open to the air or provided with ventilation or cooling. The amount of shade present shall be at least enough to accommodate 25% of the employees on the shift at any time, so that they can sit in a normal posture fully in the shade without having to be in physical contact with each other. The shaded area shall be located as close as practicable to the areas where employees are working.

6510DSB Interlocking Series Work Tent - yellow and white, 10' x 10' x 6.5' H, with case by Pelsue

The interlocking flaps allow you to connect two tents together, or attach the tent to a work vehicle. The interlocking flaps are a great way to get extra functionality out of your tent.

• Easy Set Up
• Interlocking Doors
• Clips & D-rings with interlocking flaps
• Rear 8" ventilation hose entry sleeve
• Heavy-duty frame
• 2 screen windows with roll-up flaps
• 3 tie-down cords through the hubs
• 7 stakes and 4 ground loops
• Carrying case

6510SRS Shade Tent. 10' x 10' Reflective Stripe by Pelsue

With increasing heat stress-related injuries and deaths on the work site, the need for shade during breaks has become imperative. The Pelsue Shade Tent provides portable instant shade. Using time proven Pelsue tent technology, the shade tent offers on site shade for work crews. The tent is easy to set up and has a rugged construction. Multiple sizes are available

• Provides portable shade - sets up in seconds
• Industrial strength - made for daily commercial use
• Pops up in seconds - no loose parts or finger pinching frames
• Opaque roof fabric - also used in airplane windshield covers!
• Three mesh sides provide ventilation
• Removable fly for blocking late afternoon sun
• Carry case included
• Custom colors & branding available
• Can be set up in 24 seconds

MEETS CALIFORNIA OSHA STANDARDS

Title 8 Section 3395 subsection D1 (d) Access to shade. (1) Shade required to be present when the temperature exceeds 85 degrees Fahrenheit. When the outdoor temperature in the work area exceeds 85 degrees Fahrenheit, the employer shall have and maintain one or more areas with shade at all times while employees are present that are either open to the air or provided with ventilation or cooling. The amount of shade present shall be at least enough to accommodate 25% of the employees on the shift at any time, so that they can sit in a normal posture fully in the shade without having to be in physical contact with each other. The shaded area shall be located as close as practicable to the areas where employees are working.