pH/ORP/ISE Benchtop Meters, Oakton

WD-35419-24 Ion 700 Meter with Double-junction Glass, Refillable pH Electrode, ATC Probe, and Stand, 110/220 VAC 50/60 Hz, with NIST Traceable Certificate of Calibration by Oakton

Large display allows you to see measurement values at a glance

Ion 700 meter measures pH, mV, relative mV, and temperature while adding ion measurement capabilities. Ion concentration is directly read in ppm for easy use. Verify electrode operation while taking measurements with the dual ppm and mV display. Up to three ion-concentration standards (choose from 0.1, 1.0, 10.0, 100.0, or 1000.0 ppm) may be calibrated.

The easy-to-use, microprocessor-based meter features HOLD, ATC, recorder output, and electrode diagnostics. Automatic temperature compensation (ATC) maintains reading accuracy even with fluctuating temperatures. Five-point pH calibration, with automatic buffer recognition for both USA (pH 1.68, 4.01, 7.00, 10.01, 12.45) and NIST (pH 1.68, 4.01, 6.86, 9.18, 12.45) pH buffers, makes for easy calibration no matter which requirement you need to meet. The convenient pull-out quick reference card keeps procedures handy at all times. The large, dual-display LCD provides excellent visibility even from a distance. Meter accepts pH, ORP, or ion-selective electrodes with BNC connectors.

• Custom 3-1/4" x 2-7/16" LCD display
• Small size conserves valuable benchspace
• Store and recall up to 100 data sets

WD-35419-26 pH/Ion 700 Ion 700 Benchtop Meter with Stand and NIST-Traceable Calibration by Oakton

Oakton benchtop 700-series meters are designed for use in crowded laboratory settings. Compact footprint of less that 6" x 7" (16 x 18 cm) conserves valuable space, while the large, dual-display LCD provides excellent visibility even from a distance.

Ion 700 meter measures pH, mV, relative mV, ion concentration and temperature. Automatic temperature compensation (ATC) maintains reading accuracy even with fluctuating temperatures. Models feature five-point pH calibration with automatic buffer recognition for both USA (pH 1.68, 4.01, 7.00, 10.01, 12.45) and NIST (pH 1.68, 4.01, 6.86, 9.18, 12.45) pH buffers. Meters additionally feature ion concentration calibration of up to 5 points.

Meter features include Auto-Hold, selectable °F or °C measurement, and easy recall of electrode slope or offset. The convenient pull-out quick reference card keeps procedures handy at all times. Use 700-series meters with any pH, ORP, or ISE electrodes with a BNC connector.

As always, our waterproof meters are IP67-rated for both dust and water intrusion. Even with no probes attached!

• Compact footprint is over 40% smaller than other benchtop meters
• Large display permits easier readout viewing
• Datalogging allows you to store and recall up to 100 data sets

WD-35419-27 Ion 700 Meter with "All-in-one" SJ Epoxy pH Electrode/ATC Probe and Stand, 110/220 VAC 50/60 Hz, with NIST Traceable Certificate of Calibration by Oakton

Large display allows you to see measurement values at a glance

Ion 700 meter measures pH, mV, relative mV, and temperature while adding ion measurement capabilities. Ion concentration is directly read in ppm for easy use. Verify electrode operation while taking measurements with the dual ppm and mV display. Up to three ion-concentration standards (choose from 0.1, 1.0, 10.0, 100.0, or 1000.0 ppm) may be calibrated.

The easy-to-use, microprocessor-based meter features HOLD, ATC, recorder output, and electrode diagnostics. Automatic temperature compensation (ATC) maintains reading accuracy even with fluctuating temperatures. Five-point pH calibration, with automatic buffer recognition for both USA (pH 1.68, 4.01, 7.00, 10.01, 12.45) and NIST (pH 1.68, 4.01, 6.86, 9.18, 12.45) pH buffers, makes for easy calibration no matter which requirement you need to meet. The convenient pull-out quick reference card keeps procedures handy at all times. The large, dual-display LCD provides excellent visibility even from a distance. Meter accepts pH, ORP, or ion-selective electrodes with BNC connectors.

• Custom 3-1/4" x 2-7/16" LCD display
• Small size conserves valuable benchspace
• Store and recall up to 100 data sets

WD-35420-01 RS-232 Interface Cable for Advanced pH/Ion Meters by Oakton

Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample. For your convenience, cables, power adapters, and other accessories are available for your Oakton meters and pocket testers.

Works with 2700 and 450 meters.

WD-35420-20 pH 2700 Meter with pH Electrode, ATC Probe, Electrode Stand, and Software by Oakton

Great general-purpose meter for laboratories where GLP data-management is required

The pH 2700 meter offers a new compact design that is over 40% smaller than other benchtop meters. The large display is easy to read even at a distance and features stability indication. All measurements include temperature display. The meter includes auto-buffer recognition for both USA and NIST pH buffer sets, automatic or manual temperature compensation, temperature in °F or °C, and display Hold. A calibration due alarm function means no more out-dated calibrations. The water-resistant membrane keypad offers password protection for both set-up and calibration.

Multiple pH slopes and offset display enables quick, easy electrode diagnosis. The electrode holder can be mounted on either side of the meter. The convenient pull-out, quick-reference card keeps keypad functions at your fingertips.

• Large display with bright backlight
• Dynamic reading stability indication indicates when your measurement is stable
• Up to 500-point memory with date-time stamp for GLP
• Password protection for both setup and calibration for security
• Calibration-due alarm let you know when to recalibrate
• Audible alarms alert you when reading fall out of range
• Output data to either printer or PC

WD-35420-21 pH 2700 Meter with pH Electrode, ATC Probe, Electrode Stand, and Software, NIST Traceable Certificate of Calibration by Oakton

Great general-purpose meter for laboratories where GLP data-management is required

The pH 2700 meter offers a new compact design that is over 40% smaller than other benchtop meters. The large display is easy to read even at a distance and features stability indication. All measurements include temperature display. The meter includes auto-buffer recognition for both USA and NIST pH buffer sets, automatic or manual temperature compensation, temperature in °F or °C, and display Hold. A calibration due alarm function means no more out-dated calibrations. The water-resistant membrane keypad offers password protection for both set-up and calibration.

Multiple pH slopes and offset display enables quick, easy electrode diagnosis. The electrode holder can be mounted on either side of the meter. The convenient pull-out, quick-reference card keeps keypad functions at your fingertips.

• Large display with bright backlight
• Dynamic reading stability indication indicates when your measurement is stable
• Up to 500-point memory with date-time stamp for GLP
• Password protection for both setup and calibration for security
• Calibration-due alarm let you know when to recalibrate
• Audible alarms alert you when reading fall out of range
• Output data to either printer or PC

WD-35420-22 pH 2700 Meter with Electrode Stand and Software by Oakton

Great general-purpose meter for laboratories where GLP data-management is required

The pH 2700 meter offers a new compact design that is over 40% smaller than other benchtop meters. The large display is easy to read even at a distance and features stability indication. All measurements include temperature display. The meter includes auto-buffer recognition for both USA and NIST pH buffer sets, automatic or manual temperature compensation, temperature in °F or °C, and display Hold. A calibration due alarm function means no more out-dated calibrations. The water-resistant membrane keypad offers password protection for both set-up and calibration.

Multiple pH slopes and offset display enables quick, easy electrode diagnosis. The electrode holder can be mounted on either side of the meter. The convenient pull-out, quick-reference card keeps keypad functions at your fingertips.

• Large display with bright backlight
• Dynamic reading stability indication indicates when your measurement is stable
• Up to 500-point memory with date-time stamp for GLP
• Password protection for both setup and calibration for security
• Calibration-due alarm let you know when to recalibrate
• Audible alarms alert you when reading fall out of range
• Output data to either printer or PC

WD-35420-23 pH 2700 Meter with Electrode Stand and Software, with NIST Traceable Certificate of Calibration by Oakton

Great general-purpose meter for laboratories where GLP data-management is required

The pH 2700 meter offers a new compact design that is over 40% smaller than other benchtop meters. The large display is easy to read even at a distance and features stability indication. All measurements include temperature display. The meter includes auto-buffer recognition for both USA and NIST pH buffer sets, automatic or manual temperature compensation, temperature in °F or °C, and display Hold. A calibration due alarm function means no more out-dated calibrations. The water-resistant membrane keypad offers password protection for both set-up and calibration.

Multiple pH slopes and offset display enables quick, easy electrode diagnosis. The electrode holder can be mounted on either side of the meter. The convenient pull-out, quick-reference card keeps keypad functions at your fingertips.

• Large display with bright backlight
• Dynamic reading stability indication indicates when your measurement is stable
• Up to 500-point memory with date-time stamp for GLP
• Password protection for both setup and calibration for security
• Calibration-due alarm let you know when to recalibrate
• Audible alarms alert you when reading fall out of range
• Output data to either printer or PC

WD-35420-24 pH 2700 Benchtop Meter with Probes and NIST-Traceable pH Buffers by Oakton

More features of the Oakton 2700 metersOakton 2700 meters meet GLP requirements - meters stamp all calibration and stored data with time/date. Nonvolatile memory stores up to 500 data sets to simplify documenting large volumes of pH or mV measurements. Meters automatically calculate and display electrode slope and offset - ideal for checking electrode quality. Order RS-232 and optional RS-232 to USB adapter separately.

Advanced set-up options allow for a large degree of user customization. Datalogging intervals can be programmed into the meter for convenient continuous monitoring. Programmable limit alarm alerts you when readings fall out of range. Calibrate up to 6 points for pH using USA, NIST, DIN, or custom buffer sets. Optional password protection prevents changes to meter setup and calibration.

Oversized 3-1/4" x 2-7/16" (8.3 x 6.2 cm) graphic LCD can be viewed from across the room. Bright backlight and large digits allow readings in all conditions. Informative display shows pH or Redox measurements together with temperature, electrode status, cal points, time and date all at once! Cal-due alarm lets you know when recalibration is necessary for measurement accuracy. Visual stability indicator informs you when measurements have stabilized, eliminating guesswork. Comprehensive self-diagnostics make troubleshooting a breeze.

Oakton® Traceable® One-Shot™ pH Buffer Solutions are supplied with NIST-traceable calibration reports stating accuracy at 25°C to ±0.010 pH, in addition to conversion values for pH/temperature - for the most accurate calibrations!

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• Oakton® Traceable® pH buffer solutions are NIST-traceable reference materials
• Supplied with calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• Individually packed in foil pouch to prevent UV exposure that may degrade accuracy
• Convenient, single-use vials eliminate concerns of cross-contamination; each pack contains six polyethylene vials with 100-mL of pH buffer per vial
• If unopened, shelf life is 2 years; once opened, use pH 4 and pH 7 within 90 days, pH 10 within 30 days
• Color-coded buffer for easy identification

KEY FEATURES

• Oversize, informative display with bright backlight
• High 0.001 pH resolution with ±0.002 pH accuracy
• Store and recall up to 500 sets of data - send data to a PC or printer
• Bundled kit for convenience and savings!
• Traceable® pH Buffers are Certified Reference Materials, making them one of the most accurate available
• Supplied with calibration report from an ISO 17034 and ISO 17025 accredited laboratory

INCLUDES

electrode stand and 100/240 VAC power adapter. Meters with probes add: ATC probe 35613-13, pH electrode 35805-04, and 60-mL of electrode fill solution. For full specifications please refer to the instruction manual

ATC probe 35613-13, pH electrode 35805-04, 60-mL of electrode fill solution, Two 100-mL vials of each pH buffer solution (4.005, 7.000, and 10.012), electrode stand, and 100/240 VAC power adapter.

WD-35421-00 Ion 2700 Benchtop Meter with pH Electrode, Software, and Probe Stand by Oakton

GLP-compliant meter with pH, ORP, or ion concentration capability is perfect for water, wastewater, or food applications.

The Ion 2700 meter offers a new compact design that is over 40% smaller than other benchtop meters. The large display is easy to read even at a distance and features stability indication. All measurements include temperature display. The meter includes auto-buffer recognition for both USA and NIST pH buffer sets, automatic or manual temperature compensation, temperature in °F or °C, and display Hold. A calibration due alarm function means no more out-dated calibrations. The water-resistant membrane keypad offers password protection for both set-up and calibration.

Multiple pH slopes and offset display enables quick, easy electrode diagnosis. The electrode holder can be mounted on either side of the meter. The convenient pull-out, quick-reference card keeps keypad functions at your fingertips.

• Large display with bright backlight
• Dynamic reading stability indication displays when your measurement is stable
• Up to 500-point memory with date-time stamp for GLP
• Password protection for both setup and calibration for security
• Calibration-due alarm let you know when to recalibrate
• Audible alarms alert you when reading fall out of range
• Output data to either printer or PC

WD-35421-01 Ion 2700 Benchtop Meter with pH Electrode, Software, and Probe Stand, with NIST Traceable Certificate of Calibration by Oakton

GLP-compliant meter with pH, ORP, or ion concentration capability is perfect for water, wastewater, or food applications.

The Ion 2700 meter offers a new compact design that is over 40% smaller than other benchtop meters. The large display is easy to read even at a distance and features stability indication. All measurements include temperature display. The meter includes auto-buffer recognition for both USA and NIST pH buffer sets, automatic or manual temperature compensation, temperature in °F or °C, and display Hold. A calibration due alarm function means no more out-dated calibrations. The water-resistant membrane keypad offers password protection for both set-up and calibration.

Multiple pH slopes and offset display enables quick, easy electrode diagnosis. The electrode holder can be mounted on either side of the meter. The convenient pull-out, quick-reference card keeps keypad functions at your fingertips.

• Large display with bright backlight
• Dynamic reading stability indication displays when your measurement is stable
• Up to 500-point memory with date-time stamp for GLP
• Password protection for both setup and calibration for security
• Calibration-due alarm let you know when to recalibrate
• Audible alarms alert you when reading fall out of range
• Output data to either printer or PC

WD-35421-02 Ion 2700 Benchtop Meter, Software, and Probe Stand by Oakton

GLP-compliant meter with pH, ORP, or ion concentration capability is perfect for water, wastewater, or food applications.

The Ion 2700 meter offers a new compact design that is over 40% smaller than other benchtop meters. The large display is easy to read even at a distance and features stability indication. All measurements include temperature display. The meter includes auto-buffer recognition for both USA and NIST pH buffer sets, automatic or manual temperature compensation, temperature in °F or °C, and display Hold. A calibration due alarm function means no more out-dated calibrations. The water-resistant membrane keypad offers password protection for both set-up and calibration.

Multiple pH slopes and offset display enables quick, easy electrode diagnosis. The electrode holder can be mounted on either side of the meter. The convenient pull-out, quick-reference card keeps keypad functions at your fingertips.

• Large display with bright backlight
• Dynamic reading stability indication displays when your measurement is stable
• Up to 500-point memory with date-time stamp for GLP
• Password protection for both setup and calibration for security
• Calibration-due alarm let you know when to recalibrate
• Audible alarms alert you when reading fall out of range
• Output data to either printer or PC

WD-35421-03 Ion 2700 Benchtop Meter, Software, and Probe Stand, with NIST Traceable Certificate of Calibration by Oakton

GLP-compliant meter with pH, ORP, or ion concentration capability is perfect for water, wastewater, or food applications.

The Ion 2700 meter offers a new compact design that is over 40% smaller than other benchtop meters. The large display is easy to read even at a distance and features stability indication. All measurements include temperature display. The meter includes auto-buffer recognition for both USA and NIST pH buffer sets, automatic or manual temperature compensation, temperature in °F or °C, and display Hold. A calibration due alarm function means no more out-dated calibrations. The water-resistant membrane keypad offers password protection for both set-up and calibration.

Multiple pH slopes and offset display enables quick, easy electrode diagnosis. The electrode holder can be mounted on either side of the meter. The convenient pull-out, quick-reference card keeps keypad functions at your fingertips.

• Large display with bright backlight
• Dynamic reading stability indication displays when your measurement is stable
• Up to 500-point memory with date-time stamp for GLP
• Password protection for both setup and calibration for security
• Calibration-due alarm let you know when to recalibrate
• Audible alarms alert you when reading fall out of range
• Output data to either printer or PC

WD-35608-50 Conductivity/TDS Cell, Ultem Body, Steel Sensor, 3 ft Cable, K=1.0 by Oakton

Feature built-in temperature compensation

• Ultem Cells with K = 1.0 have removable a probe guard for easy cleaning

Choose from three different cell constants:

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS)
• K = 0.1 for low conductivity measurements (near or below 20 µS)

Each conductivity/TDS cell has a temperature range of 0 to 100°C.

WD-35608-52 Conductivity/TDS Cell, Glass Body, Platinum Sensor, 3 ft Cable, K= 1.0 (Use with CON 400, CON 410, TDS 400, pH/CON 300 and pH/CON 510 meters) by Oakton

Feature built-in temperature compensation

• Ultem Cells with K = 1.0 have removable a probe guard for easy cleaning

Choose from three different cell constants:

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS)
• K = 0.1 for low conductivity measurements (near or below 20 µS)

Each conductivity/TDS cell has a temperature range of 0 to 100°C.

WD-35608-55 Conductivity/TDS Cell, Epoxy Body, Platinum Sensor, 3 ft Cable, K= 0.1 by Oakton

Feature built-in temperature compensation

• Ultem Cells with K = 1.0 have removable a probe guard for easy cleaning

Choose from three different cell constants:

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS)
• K = 0.1 for low conductivity measurements (near or below 20 µS)

Each conductivity/TDS cell has a temperature range of 0 to 100°C.

WD-35608-57 Conductivity/TDS Cell, Ultem Body, Steel Sensor, 10 ft Cable, K = 0.1 (Use with CON 400, CON 410, TDS 400, pH/CON 300 and pH/CON 510 meters) by Oakton

Feature built-in temperature compensation

• Ultem Cells with K = 1.0 have removable a probe guard for easy cleaning

Choose from three different cell constants:

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS)
• K = 0.1 for low conductivity measurements (near or below 20 µS)

Each conductivity/TDS cell has a temperature range of 0 to 100°C.