Modern Water, Modern Water

Vibrio fischeri bacteria; shelf life is 18 months when stored at (-20C) - (-25C); on average one vial will provide enough reagent for 20-25 tests (depending on number of dilutions, test protocols, controls, etc.)

Will last for approximately 1 box of reagent or 10 vials; nontoxic 22% sodium chloride solution; shelf life is one year at RT.

SD50950 QuickChek Sulphate Reducing Bacteria RC II Ten-Pak by Modern Water

The QuickChek™ SRB Detection System is a rapid enzyme immunoassay method that detects sulfate reducing bacteria (SRB). The test employs purified antibodies to detect the enzyme adenosine-5'-phosphosulfonate (APS) reductase which is common to all strains of SRB.

The purified antibodies are attached to small particles that selectively capture the APS reductase enzyme. The particles and captured enzyme are then isolated on a porous membrane, which forms a reactive layer that turns blue in the presence of the APS reductase enzyme.

QuickChek™ SRB offers several advantages over cell culture techniques for SRB detection including immediate and accurate results. The kit allows testing of solid and semi-solid samples and detects all SRB, including SRB that is unable to grow in some standard media. The test results are not compromised by chemical or salinity interferences that are often found in field samples.

The QuickChek™ SRB kit is completely self-contained and disposable. Each kit includes all necessary materials to detect and enumerate sulfate reducing bacteria. There is no need for pretreatment or dilution of samples and there are not special hazardous waste disposal limitations.

Features:

• Semi-quantitative results
• Detects all viable and nonviable SRB samples
• Results available in approximately 8-10 minutes
• Two or three samples simultaneously
• Detection limit of 103 cells/ml
• etection limit for "clean" waters down to 101 cells/ml

Applications

• Corrosion coupons
• Cutting fluids
• Drilling fluids (Muds)
• Solids: biofilms, sludge, rust, mud
• Water associated with oil

AZF686300 Microtox SOLO Reagent, 50 vials per box by Modern Water

SOLO Reagent is the same as Acute Reagent - packaged to run a single test

Accessories required:

• Disposable Glass Cuvettes: box of 1000 - AZF686004
• Cuvette Racks (set of 5) - AZF686250
• Oxford® Fixed Volume 10 uL Pipette (for high toxicity protocol only) - AZF686067
• Adjustable Volume Pipette: 10 - 100 uL - AZF686087
• Adjustable Volume Pipette: 100 - 1000 uL (for all protocols) - A00176
• 10-100 uL Wide Bore Pipette Tips: tray of 96 - AZFV020
• 100-1000 uL Wide Bore Pipette Tips: tray of 100 - AZFV021
• Microtox® Diluent: 1L bottle - AZF686011
• Microtox® Osmotic Adjusting Solution: 1 x 50 mL - AZF686019

A00157 RaPID Assay PAHs 100 Test Tube Kit by Modern Water

RaPID Assay® is a rapid field or laboratory enzyme immunoassay method for the analysis of soil and water for remediation, assessment, and industrial testing.

Features:

• Rapid field testing procedure for analysis of soil and water samples
• Quantitative data results with excellent analytical precision
• Results available in approximately 60 minutes
• Tests up to 50 samples at once
• Magnetic particle immunoassay
• Training available
• EPA SW-846 method #4035

Test result type

• Quantitative, semi-quantitative or qualitative

Samples per kit

• 100 test kit (tests up to 80+ samples)

Assay range

• Soil: 0.2 ppm to 5 ppm as Phenanthrene
• Water: 2.66ppb to 66.5ppb as Phenanthrene
• Range can be extended with additional dilutions
• Site specific calibration required to meet total PAH analysis

Sample preparation

• Soil samples require prior extraction using the sample extraction kit (sold separately).
• The sample extraction kit provides materials for 12 soil sample extractions
• Water samples must be diluted three parts sample to one part methanol to prevent adsorptive loss

Sampling time

• Soil extraction time is typically two minutes per sample plus assay run time of approximately 60 minutes

Specificity

The total PAHs (sum of 16 PAH compounds) of the indicated contaminant types in soil samples are expressed below, at each of the three kit calibrator (standards) levels, in units comparable to results from GC method 8270 or HPLC method 8310.

The RaPIDAssay® PAH immunoassay test does not differentiate between phenanthrene and other polyaromatic hydrocarbons.The table below shows compounds at the limit of quantitation (LOQ) - an approximate concentration required to yield a positive result at the lowest standard.The IC50 is the concentration required to inhibit one-half of the colour produced by the negative control. It is also used to calculate cross-reactivity values to similar compounds.

Test kit components

• Antibody coated magnetic particles for analysis of 100 test tubes
• Diluent zero, wash, enzyme conjugate, colour development, stop reagents and wash solution
• Standards for 2, 10 and 50 ppb as Phenanthrene
• Kit control as 25 ppb as Phenanthrene
• Disposable test tubes
• Test kit instructions

Storage & precautions

• Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging
• Reagents must be stored at 39° to 46°F (4° to 8°C) when not in use
• Store at ambient temperature 64° to 81°F (18° to 27°C) is acceptable for day of use
• Kits must be brought to 64° to 81°F (18° to 27°C) before use
• Do not expose colour solution to direct sunlight

Required test materials

• PAH 100 test tube kit (A00157)
• Sample extraction kit(for soil samples only) (A00160EA)

Required test equipment

• RaPID Assay accessory kit which contains (6050100 (P)/6997010 (R)): RPA-II RaPID analyser (6000081), Printer (6000082), Magnetic separation rack (A00004C), Repeator pipet (A00008), Adjustable volume pipet (A00176), Vortex mixer (A00014), Portable balance (A00131), Digital timer (A00015)
• Repeator pipet tips (A00009)
• Adjustable pipet tips (A00013)

Other recommended materials

• Latex gloves
• Liquid and solid waste containers
• Calculator
• Absorbant paper for blotting
• Marking pen

Will last for approximately 1 box of reagent or 10 vials; nontoxic Ultra Pure Water; shelf life is one year at RT.

Will last for approximately 2 boxes of reagent or 20 vials; nontoxic, 2% sodium chloride solution; shelf life is one year at RT.

AZF686060 Microtox Acute Starter Pack by Modern Water

Only available with purchase of M500 analyser. Includes the following:

• 1 AZF686018 Microtox® Acute Reagent 10 vials
• 1 AZF686011 Microtox® Diluent
• 1 AZF686019 Microtox® Osmotic Adjusting Sol'n
• 2 AZF686016 Microtox® Reconstitution Solution
• 1 686005 Disposable Glass Cuvettes: 400x

A00162 RaPID Assay Total BTEX / TPH 100 Tube Kit by Modern Water

RaPID Assay® is a rapid field or laboratory enzyme immunoassay method for the analysis of soil and water for remediation, assessment, and industrial testing.

Features:

• Rapid field testing procedure for analysis of soil and water samples
• Quantitative data results with excellent analytical precision
• Results available in approximately 60 minutes
• Training available
• Magnetic particle immunoassay
• Correlated to TPH methods (knowledge of fuel source required)

Test result type

• Quantitative, semi-quantitative or qualitative

Samples per kit

• 100 test kit (tests up to 80+ samples) (Five kit minimum order)

Assay range

• Soil: 0.9 ppm to 30 ppm as total BTEX standard
• Water: 0.02 to 3.0 ppm as total BTEX standard
• asTPH:range varies based on fuel source

Sample preparation

• Soil samples require prior extraction using the sample extraction kit (sold separately).
• The sample extraction kit provides materials for 12 soil sample extractions with methanol.

Sampling time

• Soil extraction time is typically two minutes per sample plus assay run time of approximately 60 minutes.

Specificity

The total BTEX/TPH concentrations of the indicated contaminant types in soil samples are expressed below, at each ofthe three kit calibrator levels, in units comparable to results from GC method 8015 (TPH).

The total BTEX/ TPH RaPID assay immunoassay test does not differentiate between BTEX and other petroleum hydrocarbons.The table below shows compounds at the limit of quantitation (LOQ) - an approximate concentration required to yield a positive result at the lowest standard. The IC50 is the concentration required to inhibit one-half of the colour produced by the negative control. It is also used to calculate cross-reactivity values to similar compounds.

Test kit components

• Antibody coated magnetic particles for analysis of 100 test tubes
• Zero standard, wash, enzyme conjugate, colour development and stop reagents
• Standards for 0.09, 0.35 and 3.0 ppm as total BTEX
• Kit control as 2.1 ppm as total BTEX
• Disposable test tubes

Storage & precautions

• Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging
• Reagents must be stored at 39° to 46°F (4° to 8°C) when not in use
• Store at ambient temperature 64° to 81°F (18° to 27°C) is acceptable for day of use
• Kits must be brought to 64° to 81°F (18° to 27°C) before use
• Do not expose colour solution to direct sunlight

Required test materials

• Total BTEX/TPH 100 tube kit (A00162)
• Sample extraction kit(for soil samples only) (A00165EB)
• Total BTEX sample diluent 100ml (as needed to increase range)

Required test equipment

• RaPID Assay accessory kit which contains (6050100 (P)/6997010 (R)): RPA-II RaPID analyser (6000111), Magnetic separation rack (A00004), Repeator pipet (A00008), Adjustable volume pipet (A00176), Vortex mixer (A00014), Portable balance (A00131), Digital timer (A00015)
• Repeator pipet tips (A00009)
• Adjustable pipet tips (A00013)

Other recommended materials

• Latex gloves
• Liquid and solid waste containers
• Calculator
• Absorbant paper for blotting
• Marking pen

A00071 Atrazine 100 Test Tube Kit by Modern Water

RaPID Assay® is a rapid field or laboratory enzyme immunoassay method for the analysis of soil and water for remediation, assessment, and industrial testing.

Features:

• Rapid field testing procedure for analysis of soil, food or water samples
• Quantitative data results with excellent analytical precision
• Results available in approximately 60 minutes
• Tests up to 50 samples at once
• Magnetic particle immunoassay
• Training available
• EPA SW-846 method #4670 for drinking water

Test result type

• Quantitative, semi-quantitative or qualitative depending on protocol selected

Samples per kit

• 100 test kit (tests up to 80+ samples)

Assay range

• 0.04 to 5.0 ppb
• LDD = 0.1 ppb

Sample methods

• Methods exist for soil and a wide variety of commodities

Sampling time

• 'Sample-to-Data' in approximately 60 minutes

Specificity

Basic Test Procedure

• Add 200 μL of calibrator or prepared sample, 250μL enzyme conjugate and 500 μL antibody coupled magnetic particles.Vortex
• Incubate for 15 minutes
• Using the RaPID magnetic separator, decant and wash
• Add 500 μL colour solution
• Incubate for 20 minutes
• Stop the reaction and read colour at 450 nm
• Quantitive results and QC parameters are calculated and printed automatically using the RPA-II® spectrophotometer

Test kit components

• Antibody coated magnetic particles, enzyme conjugate, colour development, stop andwash reagents for analysis of 100 test tubes
• Standards for 0.1 1.0 and 5.0 ppb Atrazine
• Zero standard and 3.0 ppb control standard
• Disposable test tubes
• Test kit instructions

Storage & precautions

• Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging
• Reagents must be stored at 39° to 46°F (4° to 8°C) when not in use
• Store at ambient temperature 64° to 81°F (18° to 27°C) is acceptable for day of use
• Kits must be brought to 64° to 81°F (18° to 27°C) before use
• Do not expose colour solution to direct sunlight

Required test materials

• Atrazine RaPID Assay (A00071)
• Atrazine sample diluent (100mL) (A00051)

Required test equipment

• Accessory kit (purchase) (6050100)
• Accessory kit (rental) (6997010)
• Accessory kit components: Magnetic separation rack (A00004), Repeator pipette (A00008), Adjustable volume pipette (A00176), Adjustable volume pipette (6000111), RPA-II analyser with printer (A00014), Vortex mixer (A00014), Digital timer (A00015)

7210000 EnviroGard Triazine Test Kit by Modern Water

Envirogard® is a rapid field enzyme immunoassay method for the analysis of water. It uses a coated tube technology to detect the analyte of concern.

Features:

• The first environmental immunoassay format to be made commercially available
• Broad screen for the triazine family of herbicides including atrazine
• Rapid field method for the analysis of drinking and environmental water samples
• Test up to six tubes at once
• Coated tube immunoassay

Test result type

• Qualitative and Semi-quantitative data

Samples per kit

• 20 tube test kit (tests up to 12 samples)

Assay range

• 0.1 ppb to 1.0 ppb
• LDD = 0.053 ppb (atrazine)

Sample methods

• Water and a variety of other matrices

Sampling time

• Sample-to-data in approximately 10 minutes

Specificity

The EnviroGard® Triazine Test Kit does not differentiate between atrazine and closely related compounds, but detects their presence to differing degrees. The chart below shows the approximate Lower Limits of Detection (LDD) for the cross-reacting compounds.

Basic Test Procedure

• Add 160 uL of calibrator, negative control or sample to the tube
• Add four drops of enzyme conjugate
• Incubate for five minutes
• Decant and wash four times
• Add four drops of substrate and chromogen
• Incubate for two minutes
• Add one drop of stop solution
• Read on photometer

Test kit components

• 20 antibody-coated test tubes
• One vial of negative control
• One vial of atrazine-enzyme conjugate
• One vial of 0.1 ppb atrazine calibrator
• One vial of 1.0 ppb atrazine calibrator
• One vial each substrate and chromagen
• One vial stop solution
• One test tube rack

Storage & precautions

• Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging
• Reagents must be stored at 39° to 46°F (4° to 8°C) when not in use
• Store at ambient temperature 64° to 81°F (18° to 27°C) is acceptable for day of use for up to 8 hours
• Kits must be brought to 64° to 81°F (18° to 27°C) before use
• Do not expose colour solution to direct sunlight

Required test materials

• Triazine EnviroGard® test kit (7210000)

Required test equipment

• Disposable-tip pipette which will measure 160 uL
• Timer
• Glass tubes or vials for calibrator preparation
• Tap or distilled water for rinsing tubes
• Marker pen
• Pipette that will measure 0.5mL

Other recommended materials

• Calculator
• Spectrophotometer

ATP Reagent shelf life is 1 year (refrigerated)

7020301 PCB EnviroGard 12T Soil Test Kit by Modern Water

Envirogard® is a rapid field enzyme immunoassay method for the analysis of soil remediation, assessment and industrial testing. It uses a coated tube technology to detect the analyte of concern.

Features:

• Convenient and rapid testing in the field or labatory
• Tests up to 10 samples at once
• Two detection levels of your choice are provided with each sample
• High level of accuracy
• EPA SW-846 Method #4020

Test result type

• Semi-quantitative or qualitative data
• Knowledge of specific aroclor(s) present will aid accuracy

Samples per kit

• Dependent on batch size and number of detection levels
• Each sample can be tested one at a time or in batches of two to ten samples

Assay range

• Soil: 0.5 ppm to 500 ppm with dilutions
• Wipes: 5.0 ug/100cm² to 5000 ug/100cm² with dilutions

Sample preparation

• Soil samples require prior extraction using the sample extraction kit (sold separately)
• The sample extraction kit provides materials for 12 soil sample extractions with methanol

Sampling time

• Approximately two minutes per sample plus assay run time of approximately 30 minutes

Basic Test Procedure

• Transfer soil or wipe to extraction jar
• Cap and shake for one minute
• Filter extracted sample
• Pipette and dilute samples with dilution ampule
• Transfer 1 ml of buffer to glass buffer tubes
• Pipette and transfer sample to buffer tubes
• Fit antibody coated tubes on buffer tubes; invert and mix;return to antibody coated tube
• Incubate for 10 minutes
• Connect antibody coated and conjugate tubes; invert and mix, return to antibody coated tube
• Incubate five minutes
• Wash antibody coated tubes vigorously four times
• Using a repeater pipette at setting two and 5 mL tip,transfer 200 uL substrateA to each tube
• Add 200 uL substrate B to each tube and mix
• Inclubate for 2.5 minutes
• Add 200 uL STOP to each tube
• Read tubes in photometer.Record data

Test kit components

• 48 antibody coated tubes and PCB enzyme conjugate vials
• 48 glass buffer tubes
• Substrate and stop solution reagents
• PCB standard
• Pipette tips and bulb pipettes
• Buffer
• Amber vials
• Wash solution
• 12 ampule crackers

Storage & precautions

• Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging.
• Store at ambient temperature 64° to 81°F (18° to 27°C)
• Kits must be brought to 64° to 81°F (18° to 27°C) before use
• Do not freeze test kit components

Required test materials

• PCB EnviroGard 12T accessory kit (6050400)
• PCB EnviroGard 12T accessory kit rental (Includes all equipment required to operate test and interpret results)(6997020)

Required test equipment

• PCB EnviroGard 12T soil test kit (7020301)
• PCB soil sample extraction kit (7020301EB)
• EnviroGard PCB wipe sample extraction kit (7020301WA)

Other recommended materials

• Absorbent paper
• Liquid waste container
• Disposable gloves
• Marker pen
• Liquid and solid waste containers