Temperature Meters, Jenco

77A-E Thermocouple/RTD 2-Wire Transmitter, Type E, Ambient Temperature Range -40 to 85 °C by Jenco

2-wire thermo well head type 4-20 mA current loop output signal temperature transmitter for thermocouple or RTD applications, 3 user selectable temperature ranges and adjustable Zero Span with current output proportional to the display LED s brightness. Two ambient temperature ranges are available model 77 and 77A. Specify type J, K, E, T or RTD and specify temperature range.

• Fits standard thermo well heads
• 12-36 vdc powered
• 3user-select measurement ranges
• Current proportional led brightness
• Factory calibrated
• User adjustable zero/span
• 2ambient temperature ranges
• Factory custom calibration available

77A-J Thermocouple, Type J, 2-Wire Temperature Transmitter, Temperature Range 0 - 300°C (77A-02/0000/+0300/CEL) or 0 - 700°C (77A-02/0000/+0700/CEL) by Jenco

2-wire thermo well head type 4-20 mA current loop output signal temperature transmitter for thermocouple or RTD applications, 3 user selectable temperature ranges and adjustable Zero Span with current output proportional to the display LED s brightness. Two ambient temperature ranges are available model 77 and 77A. Specify type J, K, E, T or RTD and specify temperature range.

• Fits standard thermo well heads
• 12-36 vdc powered
• 3user-select measurement ranges
• Current proportional led brightness
• Factory calibrated
• User adjustable zero/span
• 2ambient temperature ranges
• Factory custom calibration available

77A-K Thermocouple/RTD 2-Wire Transmitter, Type K, Ambient Temperature Range -40 to 85 °C by Jenco

2-wire thermo well head type 4-20 mA current loop output signal temperature transmitter for thermocouple or RTD applications, 3 user selectable temperature ranges and adjustable Zero Span with current output proportional to the display LED s brightness. Two ambient temperature ranges are available model 77 and 77A. Specify type J, K, E, T or RTD and specify temperature range.

• Fits standard thermo well heads
• 12-36 vdc powered
• 3user-select measurement ranges
• Current proportional led brightness
• Factory calibrated
• User adjustable zero/span
• 2ambient temperature ranges
• Factory custom calibration available

77A-T Thermocouple/RTD 2-Wire Transmitter, Type T, Ambient Temperature Range -40 to 85 °C by Jenco

2-wire thermo well head type 4-20 mA current loop output signal temperature transmitter for thermocouple or RTD applications, 3 user selectable temperature ranges and adjustable Zero Span with current output proportional to the display LED s brightness. Two ambient temperature ranges are available model 77 and 77A. Specify type J, K, E, T or RTD and specify temperature range.

• Fits standard thermo well heads
• 12-36 vdc powered
• 3user-select measurement ranges
• Current proportional led brightness
• Factory calibrated
• User adjustable zero/span
• 2ambient temperature ranges
• Factory custom calibration available

791JC Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type J by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791JF Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type J by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791KC Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type K by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791KF Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type K by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LJC Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type J, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LJF Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type J, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LKC Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type K, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LKF Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type K, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LPTAC Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type PTA, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LPTAF Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type PTA, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LPTBC Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type PTB, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LPTBF Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type PTB, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LPTBF Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type PTA, LCD Display by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791PTBC Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type PTB, LCD Display by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

9010M Handheld DO/Temp Meter with Memories by Jenco

• Simultaneous display of dissolved oxygen and temperature measurements.
• 50 data set reviewable memory.
• Automatic temperature compensated (ATC) dissolved oxygen readings.
• User selectable salinity and pressure compensated dissolved oxygen readings.
• Works with accurate and reliable polarographic (9010M) or galvanic (9020M) dissolved oxygen probes.
• Automatic shutoff function (45 minutes of non-use).
• Battery life over 500 hours.
• IP65 waterproof housing.
• Low battery indicator.
• RoHS and CE compliant

9250NKA Handheld Polarographic Meter with Memory & RS-232 Kit by Jenco

Includes:

• 9250N Handheld Polarographic Meter with Memory & RS-232
• LD-900-8-DO Stainless Steel Field Probe with 8-Pin Connector & 10-ft Cable
• LD-900-03A Membrane Kit with 6 Caps & KCL Solution

9250NKC Benchtop DO/Temperature Kit by Jenco

Includes:

• 9250N Handheld Polarographic Meter with Memory & RS-232
• LD-900-10/10: DO Field Probe, Stainless Steel, 10K, 10-ft Cable, 8-Pin
• LD-900-03A: Membrane Kit with 6-Membrane Caps & KCL Solution
• 9250F: Carrying case
• Choice of 6230D115: 120V AC adapter Or 6230D230: 220V AC adapter