Conductivity TDS & Salinity Meters, Jenco, Jenco

6307K Benchtop pH/Conductivity Meter Kit by Jenco

pH/Conductivity/Salinity/Temperature benchtop meter with dual LCD displays for conductivity and r pH/mV/temp. Features cell adjust and 4.01/7.00/10.01 buffer select.

Includes:

• 6307 Benchtop pH/Conductivity Meter
• 600P pH Electrode
• K=1.0 Cell
• 6230D115 AC Adapter

• Dual LCDs display pH, conductivity, or salinity, simultaneously with temperature.
• Accepts 2-wire and 4-wire conductivity cells with k=1 or k=5 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 4 conductivity ranges are available for improved usability.
• Convenient calibration with automatic buffer recognition of us or european pH buffer sets. quick one point conductivity calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual compensation when temperature probe is not present.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Indication for electrode slope and electrode offset for optimized electrode maintenance.
• Splash resistant case is made with durable, reinforced plastic for added protection.
• RS-232 computer interface with software.
• BNC connector for pH/reference pH and mv.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• Separate pin plug connector for reference pH.
• AC adaptor or battery power.

6308CT Conductivity Analyzer Graphic Display, 3-Relays, IP-65, RS-485 by Jenco

Conductivity analyzer, 1/4 DIN panel mount single parameter analyzer with an IP-65 case, and selectable 2 or 4- wire cells. Has programmable reference temperature and coefficients. The 4-20 mA output is fully programmable, reversible and isolated. There are 2 programmable relays for conductivity and one relay for temperature and an RS-485 interface. Password & ID protected. Graphical display. CE approved. 115/230V AC.

• Bumpless calibration
• CE approved
• RS-485 output
• Programmable relays for conductivity
• Reversible and isolated 4 to 20ma output
• Programmable relay for temperature
• Conductivity/temp.measurement & control
• Simultaneous analysis and display for measurement and controls
• User programmable reference temperature temperature coefficient
• Selectable 2-wire or 4-wire cells for long cable length & wide measurement range

6312CTB Conductivity/TDS/Temp Industrial Online Controller by Jenco

• Graphic LCD with manual backlight displays conductivity/TDS, temperature, relay status and transmitter current mA output simultaneously.
• Convenient one point calibration and calibration data is stored in memory and is ready for use on power up.
• Two sets of Isolated and reversible 4-20 mA current output for conductivity and temperature allows it to be used as a proportional output.
• 2 programmable on/off relays conductivity.
• RS-485 output for remote access allows multiple units to be connected and ganged together.
• Password protection.

6360KA Handheld/Portable pH/ORP/Conductivity/Temperature Meter Kit by Jenco

Includes:

• 6350N: Conductivity mete
• 106: Glass, Conductivity probe, K=1.0, 3-ft
• Choice of 6230D115: 120V AC adapter Or 6230D230: 220V AC adapter
• 6350F: Carrying Case

6360KB Handheld/Portable pH/ORP/Conductivity/Temperature Meter Kit by Jenco

Includes:

• 6350N: Conductivity mete
• 600P: pH/Ref. electrode
• Choice of 6230D115: 120V AC adapter Or 6230D230: 220V AC adapter
• 6230F: Carrying Case with pH4, pH7 buffer capsule

6360KC Handheld/Portable pH/ORP/Conductivity/Temperature Meter Kit by Jenco

Includes:

• 6350N: Conductivity mete
• 600P: pH/Ref. electrode
• 106: Glass, Conductivity probe, K=1.0, 3-ft
• Choice of 6230D115: 120V AC adapter Or 6230D230: 220V AC adapter
• 6230F: Carrying Case with pH4, pH7 buffer capsule

EC330 VisionPlus Conductivity Meter by Jenco

Jenco EC330 is an easy to use, IP67 rated conductivity tester with TDS and temperature readout. Key features include dual display of conductivity or TDS with temperature, selectable or auto ranging, replaceable conductivity cell and IP67 rated body.

This tester is RoHS compliant.

• Simultaneous display of conductivity and temperature, or TDS and temperature
• 1 or 2 point calibration
• Automatic temperature compensation
• Selectable or auto ranging of conductivity and TDS readings
• Replaceable conductivity cell
• 6 selectable units of measure (uS/cm, mS/cm, mg/L, g/L, °C, °F)
• Data hold

EC331 VisionPlus Resistivity/Conductivity Meter by Jenco

Jenco EC331 is an easy to use, IP67 rated conductivity tester with resistivity and temperature readout. Key features include dual display of conductivity or resistivity with temperature, selectable or auto ranging, replaceable conductivity cell and IP67 rated body.

This tester is RoHS compliant.

• Simultaneous display of conductivity and temperature, or resistivity and temperature
• Convenient 1 point calibration
• Automatic temperature compensation
• Selectable or auto ranging of conductivity and resistivity readings
• Replaceable stainless steel conductivity cell ensures extended usefulness
• 4 selectable units of measure (uS/cm, M?, °C, °F)
• Battery life of over 100 hours
• Data hold