Name: GfG EC 28 Gas Transmitter with Sensor, Chlorine (Cl2), Display / Alarm - 2811-709-003
Brand: GfG
SKU: 2811-709-003
Price: 1,925.00 USD

Filter Results

Brand

Category reset

Price Range

Items per page: Sort by:

QUICK VIEW

GfG EC 28 Gas Transmitter with Ammonia (NH3), 0 - 500 ppm, Display / Modbus - 2811-4505-007

| Item #: 2811-4505-007

$2,485.00

View Product Details >

GfG EC 28 Gas Transmitter with Ammonia (NH3), 0 - 500 ppm, Display / Modbus - 2811-4505-007

Item #	2811-4505-007
Brand

Price: $2,485.00

Quantity:

2811-4505-007 EC 28 Gas Transmitter with Ammonia (NH3), 0 - 500 ppm, Display / Modbus by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG's proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with Ammonia (NH3), 0 - 500 ppm, Display / Alarm / Modbus - 2811-4505-008

| Item #: 2811-4505-008

$2,520.00

View Product Details >

GfG EC 28 Gas Transmitter with Ammonia (NH3), 0 - 500 ppm, Display / Alarm / Modbus - 2811-4505-008

Item #	2811-4505-008
Brand

Price: $2,520.00

Quantity:

2811-4505-008 EC 28 Gas Transmitter with Ammonia (NH3), 0 - 500 ppm, Display / Alarm / Modbus by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with MODBUS, Carbon Monoxide (CO), No Display - 2811-707-001M

Brand: GfG | Item #: 2811-707-001M

$2,330.00

View Product Details >

GfG EC 28 Gas Transmitter with MODBUS, Carbon Monoxide (CO), No Display - 2811-707-001M

Item #	2811-707-001M
Brand	GfG

Price: $2,330.00

Quantity:

2811-707-001M EC 28 Gas Transmitter with MODBUS, Carbon Monoxide (CO), No Display by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG s proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with Sensor, Carbon Monoxide (CO), Display - 2811-707-002

Brand: GfG | Item #: 2811-707-002

$1,650.00

View Product Details >

GfG EC 28 Gas Transmitter with Sensor, Carbon Monoxide (CO), Display - 2811-707-002

Item #	2811-707-002
Brand	GfG

Price: $1,650.00

Quantity:

2811-707-002 EC 28 Gas Transmitter with Sensor, Carbon Monoxide (CO), Display by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with MODBUS, Carbon Monoxide (CO), Display - 2811-707-002M

Brand: GfG | Item #: 2811-707-002M

$2,690.00

View Product Details >

GfG EC 28 Gas Transmitter with MODBUS, Carbon Monoxide (CO), Display - 2811-707-002M

Item #	2811-707-002M
Brand	GfG

Price: $2,690.00

Quantity:

2811-707-002M EC 28 Gas Transmitter with MODBUS, Carbon Monoxide (CO), Display by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with Sensor, Carbon Monoxide (CO), Display / Alarm - 2811-707-003

Brand: GfG | Item #: 2811-707-003

$1,710.00

View Product Details >

GfG EC 28 Gas Transmitter with Sensor, Carbon Monoxide (CO), Display / Alarm - 2811-707-003

Item #	2811-707-003
Brand	GfG

Price: $1,710.00

Quantity:

2811-707-003 EC 28 Gas Transmitter with Sensor, Carbon Monoxide (CO), Display / Alarm by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with MODBUS, Carbon Monoxide (CO), Display / Alarm - 2811-707-003M

Brand: GfG | Item #: 2811-707-003M

$2,770.00

View Product Details >

GfG EC 28 Gas Transmitter with MODBUS, Carbon Monoxide (CO), Display / Alarm - 2811-707-003M

Item #	2811-707-003M
Brand	GfG

Price: $2,770.00

Quantity:

2811-707-003M EC 28 Gas Transmitter with MODBUS, Carbon Monoxide (CO), Display / Alarm by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with Sensor, Carbon Monoxide (CO), Display / Alarm / Relay - 2811-707-004

Brand: GfG | Item #: 2811-707-004

$1,730.00

View Product Details >

GfG EC 28 Gas Transmitter with Sensor, Carbon Monoxide (CO), Display / Alarm / Relay - 2811-707-004

Item #	2811-707-004
Brand	GfG

Price: $1,730.00

Quantity:

2811-707-004 EC 28 Gas Transmitter with Sensor, Carbon Monoxide (CO), Display / Alarm / Relay by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO), 0 - 1,000 ppm, No Display / Modbus - 2811-707…

| Item #: 2811-707-006

$1,595.00

View Product Details >

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO), 0 - 1,000 ppm, No Display / Modbus - 2811-707-006

Item #	2811-707-006
Brand

Price: $1,595.00

Quantity:

2811-707-006 EC 28 Gas Transmitter with Carbon Monoxide (CO), 0 - 1,000 ppm, No Display / Modbus by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO), 0 - 1,000 ppm, Display / Modbus - 2811-707-007

| Item #: 2811-707-007

$2,050.00

View Product Details >

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO), 0 - 1,000 ppm, Display / Modbus - 2811-707-007

Item #	2811-707-007
Brand

Price: $2,050.00

Quantity:

2811-707-007 EC 28 Gas Transmitter with Carbon Monoxide (CO), 0 - 1,000 ppm, Display / Modbus by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO), 0 - 1,000 ppm, Display / Alarm / Modbus - 2811…

| Item #: 2811-707-008

$2,080.00

View Product Details >

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO), 0 - 1,000 ppm, Display / Alarm / Modbus - 2811-707-008

Item #	2811-707-008
Brand

Price: $2,080.00

Quantity:

2811-707-008 EC 28 Gas Transmitter with Carbon Monoxide (CO), 0 - 1,000 ppm, Display / Alarm / Modbus by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO) Sensor, 2,000 ppm Range, No Display - 2811-7072G…

| Item #: 2811-7072G-001

$1,435.00

View Product Details >

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO) Sensor, 2,000 ppm Range, No Display - 2811-7072G-001

Item #	2811-7072G-001
Brand

Price: $1,435.00

Quantity:

2811-7072G-001 EC 28 Gas Transmitter with Carbon Monoxide (CO) Sensor, 2,000 ppm Range, No Display by GfG

Advanced Technology

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds - just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm - Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG's GMA controller.

The EC 28 DA provides additional bright alarm LEDs and a buzzer - avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor - sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO) Sensor, 2,000 ppm Range, Display - 2811-7072G…

| Item #: 2811-7072G-002

$1,840.00

View Product Details >

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO) Sensor, 2,000 ppm Range, Display - 2811-7072G-002

Item #	2811-7072G-002
Brand

Price: $1,840.00

Quantity:

2811-7072G-002 EC 28 Gas Transmitter with Carbon Monoxide (CO) Sensor, 2,000 ppm Range, Display by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm - Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG's GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor - sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO) Sensor, 2,000 ppm Range, Display / Alarm - 2811…

| Item #: 2811-7072G-003

$1,900.00

View Product Details >

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO) Sensor, 2,000 ppm Range, Display / Alarm - 2811-7072G-003

Item #	2811-7072G-003
Brand

Price: $1,900.00

Quantity:

2811-7072G-003 EC 28 Gas Transmitter with Carbon Monoxide (CO) Sensor, 2,000 ppm Range, Display / Alarm by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm - Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG's GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor - sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO) Sensor, 2,000 ppm Range, Display Alarm / Relay -…

| Item #: 2811-7072G-004

$1,920.00

View Product Details >

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO) Sensor, 2,000 ppm Range, Display Alarm / Relay - 2811-7072G-004

Item #	2811-7072G-004
Brand

Price: $1,920.00

Quantity:

2811-7072G-004 EC 28 Gas Transmitter with Carbon Monoxide (CO) Sensor, 2,000 ppm Range, Display Alarm / Relay by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm - Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG's GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor - sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO-H) Reduced H2 sensitivity, 0 - 500 ppm, No…

| Item #: 2811-708-001

$1,770.00

View Product Details >

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO-H) Reduced H2 sensitivity, 0 - 500 ppm, No Display - 2811-708-001

Item #	2811-708-001
Brand

Price: $1,770.00

Quantity:

2811-708-001 EC 28 Gas Transmitter with Carbon Monoxide (CO-H) Reduced H2 sensitivity, 0 - 500 ppm, No Display by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm - Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG's GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor - sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO-H) Reduced H2 sensitivity, 0 - 500 ppm, Display -…

| Item #: 2811-708-002

$2,175.00

View Product Details >

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO-H) Reduced H2 sensitivity, 0 - 500 ppm, Display - 2811-708-002

Item #	2811-708-002
Brand

Price: $2,175.00

Quantity:

2811-708-002 EC 28 Gas Transmitter with Carbon Monoxide (CO-H) Reduced H2 sensitivity, 0 - 500 ppm, Display by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm - Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG's GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor - sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO-H) Reduced H2 sensitivity, 0 - 500 ppm, Display /…

| Item #: 2811-708-003

$2,235.00

View Product Details >

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO-H) Reduced H2 sensitivity, 0 - 500 ppm, Display / Alarm - 2811-708-003

Item #	2811-708-003
Brand

Price: $2,235.00

Quantity:

2811-708-003 EC 28 Gas Transmitter with Carbon Monoxide (CO-H) Reduced H2 sensitivity, 0 - 500 ppm, Display / Alarm by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm - Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG's GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor - sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO-H) Reduced H2 sensitivity, 0 - 500 ppm, Display /…

| Item #: 2811-708-004

$2,255.00

View Product Details >

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO-H) Reduced H2 sensitivity, 0 - 500 ppm, Display / Alarm / Relay - 2811-708-004

Item #	2811-708-004
Brand

Price: $2,255.00

Quantity:

2811-708-004 EC 28 Gas Transmitter with Carbon Monoxide (CO-H) Reduced H2 sensitivity, 0 - 500 ppm, Display / Alarm / Relay by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm - Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG's GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor - sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with Sensor, Chlorine (Cl2), No Display - 2811-709-001

Brand: GfG | Item #: 2811-709-001

$1,460.00

View Product Details >

GfG EC 28 Gas Transmitter with Sensor, Chlorine (Cl2), No Display - 2811-709-001

Item #	2811-709-001
Brand	GfG

Price: $1,460.00

Quantity:

2811-709-001 EC 28 Gas Transmitter with Sensor, Chlorine (Cl2), No Display by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with MODBUS, Chlorine (Cl2), No Display - 2811-709-001M

Brand: GfG | Item #: 2811-709-001M

$2,530.00

View Product Details >

GfG EC 28 Gas Transmitter with MODBUS, Chlorine (Cl2), No Display - 2811-709-001M

Item #	2811-709-001M
Brand	GfG

Price: $2,530.00

Quantity:

2811-709-001M EC 28 Gas Transmitter with MODBUS, Chlorine (Cl2), No Display by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with Sensor, Chlorine (Cl2), Display - 2811-709-002

Brand: GfG | Item #: 2811-709-002

$1,865.00

View Product Details >

GfG EC 28 Gas Transmitter with Sensor, Chlorine (Cl2), Display - 2811-709-002

Item #	2811-709-002
Brand	GfG

Price: $1,865.00

Quantity:

2811-709-002 EC 28 Gas Transmitter with Sensor, Chlorine (Cl2), Display by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with MODBUS, Chlorine (Cl2), Display - 2811-709-002M

Brand: GfG | Item #: 2811-709-002M

$2,890.00

View Product Details >

GfG EC 28 Gas Transmitter with MODBUS, Chlorine (Cl2), Display - 2811-709-002M

Item #	2811-709-002M
Brand	GfG

Price: $2,890.00

Quantity:

2811-709-002M EC 28 Gas Transmitter with MODBUS, Chlorine (Cl2), Display by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

QUICK VIEW

GfG EC 28 Gas Transmitter with Sensor, Chlorine (Cl2), Display / Alarm - 2811-709-003

Brand: GfG | Item #: 2811-709-003

$1,925.00

View Product Details >

GfG EC 28 Gas Transmitter with Sensor, Chlorine (Cl2), Display / Alarm - 2811-709-003

Item #	2811-709-003
Brand	GfG

Price: $1,925.00

Quantity:

2811-709-003 EC 28 Gas Transmitter with Sensor, Chlorine (Cl2), Display / Alarm by GfG

Advanced Technology

Easy handling

Remote Control RC2

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

Reading of gas concentration at transmitter display
Ex-proof visual and audible alarms
ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
One-person calibration at transmitter using touch keys or remote control
Plug-in smart sensor sensor replacement without opening the casing

Advantages

Concentration display at transmitter or at remote control
ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
Ex-proof visual and audible alarms
No need for expensive Ex-proof buzzer or wiring
Easy sensor replacement by means of plug-in smart sensors
Long sensor life
Low service requirement
Permanent status and function display at transmitter
Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

Technical Library

Access product manuals, datasheets, software downloads and more.

View Library

Calibration & Repair

Book certified service and repairs using our simple online work-order system.

View Services

EC 28 Series Fixed Transmitters, Fixed System Gas Monitors

Brand

Category reset

Price Range

GfG EC 28 Gas Transmitter with Ammonia (NH3), 0 - 500 ppm, Display / Modbus - 2811-4505-007

2811-4505-007 EC 28 Gas Transmitter with Ammonia (NH3), 0 - 500 ppm, Display / Modbus by GfG

Advanced Technology

Easy handling

Remote Control RC2

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Features

Advantages

GfG EC 28 Gas Transmitter with Ammonia (NH3), 0 - 500 ppm, Display / Alarm / Modbus - 2811-4505-008

2811-4505-008 EC 28 Gas Transmitter with Ammonia (NH3), 0 - 500 ppm, Display / Alarm / Modbus by GfG

Advanced Technology

Easy handling

Remote Control RC2

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Features

Advantages

GfG EC 28 Gas Transmitter with MODBUS, Carbon Monoxide (CO), No Display - 2811-707-001M

2811-707-001M EC 28 Gas Transmitter with MODBUS, Carbon Monoxide (CO), No Display by GfG

Advanced Technology

Easy handling

Remote Control RC2

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Features

Advantages

GfG EC 28 Gas Transmitter with Sensor, Carbon Monoxide (CO), Display - 2811-707-002

2811-707-002 EC 28 Gas Transmitter with Sensor, Carbon Monoxide (CO), Display by GfG

Advanced Technology

Easy handling

Remote Control RC2

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Features

Advantages

GfG EC 28 Gas Transmitter with MODBUS, Carbon Monoxide (CO), Display - 2811-707-002M

2811-707-002M EC 28 Gas Transmitter with MODBUS, Carbon Monoxide (CO), Display by GfG

Advanced Technology

Easy handling

Remote Control RC2

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Features

Advantages

GfG EC 28 Gas Transmitter with Sensor, Carbon Monoxide (CO), Display / Alarm - 2811-707-003

2811-707-003 EC 28 Gas Transmitter with Sensor, Carbon Monoxide (CO), Display / Alarm by GfG

Advanced Technology

Easy handling

Remote Control RC2

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Features

Advantages

GfG EC 28 Gas Transmitter with MODBUS, Carbon Monoxide (CO), Display / Alarm - 2811-707-003M

2811-707-003M EC 28 Gas Transmitter with MODBUS, Carbon Monoxide (CO), Display / Alarm by GfG

Advanced Technology

Easy handling

Remote Control RC2

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Features

Advantages

GfG EC 28 Gas Transmitter with Sensor, Carbon Monoxide (CO), Display / Alarm / Relay - 2811-707-004

2811-707-004 EC 28 Gas Transmitter with Sensor, Carbon Monoxide (CO), Display / Alarm / Relay by GfG

Advanced Technology

Easy handling

Remote Control RC2

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Features

Advantages

GfG EC 28 Gas Transmitter with Carbon Monoxide (CO), 0 - 1,000 ppm, No Display / Modbus - 2811-707-006

2811-707-006 EC 28 Gas Transmitter with Carbon Monoxide (CO), 0 - 1,000 ppm, No Display / Modbus by GfG

Advanced Technology

Easy handling