Fixed System Gas Monitors

Calibration Adapter with Tubing

Crowcon Xgard Calibration Adaptor

Regulator, 0.5 lpm Fixed FLow with Pressure Gauge and on/off Knob

Sensor, Arsine (AsH3), 0 - 1.50 PPM, ESM-01 Plug-In Type

*Please note we can only ship RKI products to customers within the United States

Carrying Case, ABS with Custom Foam Insert

Cal Cap, Standard, Fixed Systems, for Conduit Mounting, LEL/02/H2S/CO, (NPT Type), ESM-01

*Please note we can only ship RKI products to customers within the United States

2121020 GMA 101-E Replacement Cards for MAK Style Racks (Older Versions) by GfG

Stationary gas monitoring systems

In many industrial operations, toxic or combustible gases and vapors or oxygen deficiency can be hazardous to personnel and disruptive to production. Even small amounts of some materials can cause dangerous situations. Both legal regulations and your responsibility to your workers demand continuous, responsive, and reliable monitoring for such dangerous gases. Only a fixed gas warning system like the GMA 100 II provides the security of a round-the-clock gas monitoring without the expense of manual measurement by your staff.

Control module GMA 100 II

The GMA 100 II stationary gas warning system is comprised of a control module and a remote sensor (MWG). The sensor continuously monitors the gas concentration and sends a signal via cable to the GMA 100 II control module for evaluation. The GMA 100 II constantly monitors its own operational status and powers the remote sensor.

Immediate recognition and warning of gas hazards

The GMA 100 II provides three alarm levels that can be used to initiate appropriate responses to gas hazards. The pre-alarm, for example, warns of low gas concentrations, indicating leaks, before dangerous situations occur. The other two main alarm thresholds indicate direct danger requiring immediate action. Alarm levels can be variably adjusted within the detection range and adapted to changing requirements. Every threshold can be set to latching / non-latching and resettable / non-resettable alarm points.

Quick reaction means increased safety

Every control module provides optional voltage-free relays for the three alarms and for fault warning. The relays may be used for controlling external alarm devices like beacons or buzzers, or they can activate specific counter measures (closing valves or turning on a fan) to eliminate the danger from gases or vapors. The GMA 100 II is flexible enough to accommodate your individual requirements. Every relay can be either a normally closed (NC) or normally open (NO) contact, and works in either closed or open circuit operation.

Easy Handling

A keypad controls the display of detection range, gas and units. Relays can be controlled and checked individually. No special tools or instruments are required. Alarm levels and calibration are set with push button menu control mechanical fine tuning with potentio meters is a thing of the past.

Single or collective alarm

The GMA RB relay module and the GMA SW key-operated switch allow you to group several control modules. The key-operated switch suppresses alarms during servicing.

In addition to the collective alarm, each controller can have up to four relays which can activate or deactivate electrical devices such as exhaust fans, valves, alarm horns or lights.

Protected against power failure

In case of a power failure, the optional battery back-up NAV takes over automatically and without delay to preserve safety. The NAV slides directly into the rack; no additional wiring is required.

More than 100 GfG sensors safety for all gas hazards

GfG Instrumentation s array of powerful and dependable remote sensors (MWG) provide a safe and reliable solution for individual detection tasks.

Combustible gases

Where combustible gases may build up to explosive concentrations, GfG Instrumentation offers a variety of monitoring techniques.

Toxic gases

Specially selected GfG sensors provide reliable monitoring of areas where toxic gases and vapors may be present.

Oxygen

Electrochemical sensors ensure reliable protection from hazards caused by oxygen deficiency or surplus.

GfG s remote sensors are available for more than 100 gases. Every remote sensor can be connected to the GMA 100 II. A simple calibration with a laptop rapidly configures the GMA 100 II to almost all requirements.

Monitoring four detection points simultaneously: GMA 100 / 4

The model GMA 100 / 4 has all the features of the GMA 100 II, and can operate four remote sensors simultaneously on one control module. This allows the configuration of a lowcost and space-saving gas monitoring system for multiple detection points.

Features

• Flexible, customizable, and economical
• Microprocessor controlled for all monitoring tasks
• Easy to operate

Includes

• G300 Detector
• Specified sensor
• Alkaline batteries or rechargeable NiMH battery pack as specified
• Charger (with rechargeable battery pack only)
• Fixed gooseneck (with alkaline battery pack only)
• Manual

ES-1537-H2S Sensor, Hydrogen Sulfide (H2S) 0 - 100 PPM, Plug-In Type - CT-7 Style by RKI Instruments

The RKI Direct Connect series gas sensors are highly reliable and very cost effective for the detection of common gas hazards. The direct connect series are available for LEL, H2 Specific LEL, LEL IR, Oxygen, H2S, CO, CO2, and for a variety of toxic gases. The sensors for LEL, H2, Oxygen, H2S, CO2, and Carbon Monoxide are explosion-proof with flame arrestors, and approved for use in hazardous areas (Class 1, Div. 1 Groups B, C, D). An optional non-explosion proof version is available for oxygen, H2S, CO, and CO2 for use in non-hazardous atmospheres.

The Direct Connect sensors can be used in two different ways. The sensors can be mounted directly to the controllers as a complete stand alone system, or they can be mounted to explosion proof junction boxes for remote detection.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors are available for NH3, SO2, PH3, AsH3, and HCN.

The Direct Connect sensors can be used either indoors or outdoors. The flame arrestors for the explosion-proof versions utilize a patented coating which make them water repellent. Also, splash guards are available for use in very wet environments. An optional stainless steel junction box is available for corrosive environments.

All of the Direct Connect sensors are designed to specifically interface with RKI Beacon 110, 200, and 410 controllers.

Features:

• Available gases include; LEL, H2S, CO, & CO2; Toxic sensors include NH3, AsH3, HCN, PH3, and SO2
• Infrared sensor for combustibles and CO2
• Patented water repellent sensor coating
• Explosion proof construction
• Optional stainless steel junction box

Applications:

• Petrochemical plants
• Refineries
• Gas plants
• Offshore drilling platforms
• Water & wastewater treatment plants
• Pulp & paper mills
• Gas, telephone, & electric utilities
• Parking garages
• Manufacturing facilities
• Steel
• Automotive

*Please note we can only ship RKI products to customers within the United States

Regulator, 0.5 lpm Fixed FLow with Pressure Gauge and on/off Knob

Calibration Kit without Gas

Calibration Kit with 34L Nitrogen (N2) Calibration Gas and 34L Carbon Dioxide (CO2) Calibration Gas (25% vol.)

Humidifier Tube Assembly for Cal Kits, with 3/16" Tubing On Ends

*Please note we can only ship RKI products to customers within the United States