Laboratory Supplies, Digi-Sense

94411-35 Traceable® Key-Chain Digital Timer with Calibration by Digi-Sense

Use as a key chain, or clip to a button hole of your lab coat to take it wherever you go. Program countdown mode from 20 hours to 1 minute; alarm sounds when timer reaches zero. LCD display shows time remaining in hours and minutes. In stopwatch mode, counts up to 20 minutes and repeats.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

One 1.5V button cell battery and NIST-traceable calibration certificate with data.

98766-79 Traceable Waterproof/Steamproof Timer with Calibration by Digi-Sense

This water-resistant timer features easy, three-button operation for error-free programing. Count down from 99 min, 59 sec on the easy-to-read LCD; alarm sounds when timer reaches zero. Count up to 99 min, 59 sec or continuously; timer rolls over again from zero at end of period. Press START/STOP button at any point during a run to trigger time-out and time-in. Suction cup on back may be removed, or used to stick on instruments, walls, shelves, hoods - any flat surface. Flip-out stand allows for placement on a bench.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Use in washdown and humid areas - timer is water-resistant and steamproof
• View from up to 20 feet away - large-digit display

Includes

Stand, removable suction-cup, one 1.5 V button cell battery, and NIST-traceable calibration certificate with data.

94440-10 Dual-Display 2-Channel Jumbo-Digit Digital Clock/Timer by Digi-Sense

Jumbo digit clock/timer features a dual 3-3/4' x 5-1/2' x 1-9/32' LCD display that tilts for easy viewing. Two channels can be operated and displayed simultaneously-use both channels to count down, or use one channel to count up and the other to count down. Built-in clock displays time of day in 12- or 24-hour formats.

Timer recalls previous time set. A 70 dB alarm sounds at the end of the countdown; shuts off at the touch of a button. Timer displays time elapsed since the end of a countdown. Place timer on tabletop, or mount on wall using the double-sided taped bracket or screws (both are included).

Includes

Wall-mounting bracket and one AAA battery.

94461-28 Traceable® Instant-Recall Digital Timer with Calibration by Digi-Sense

Input a time and the instant memory returns the display to the set time - dedicate to one lab routine for repetitive tests! Large display let's you see the remaining time from across the room. Loud, 30-second alarm sounds at zero. Three-button operation is easy and intuitive.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

Built-in stand, pocket clip, magnet, one AAA battery, and NIST-traceable calibration certificate with data.

94461-24 Traceable® Magnetic/Clip-on Alarm Timer with Calibration by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Timing capacity up to 20 hours in 1 minute increments
• Alarm sounds for 1 minute when zero is reached

Includes

NIST-traceable calibration certificate with data and one AAA battery.

94400-72 Traceable® Digital Countdown Controller with Calibration; 115 VAC by Digi-Sense

Controller can be used for timed shutdown or start up of any test. Manual override permits equipment to be switched on or off without disturbing the program. Controller also allows programming for 14 different off/on daily clock switchings, up to 196 on/off switchings per week. LCD display is 1/2" high and has accuracy of 0.01%. Countdown controller is programmable in any one-minute intervals from 23 hours, 59 minutes, 59 seconds to 1 minute. Each controller is provided with an individual serial numbered certificate.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory

94461-21 Traceable Single-Event Digital Stopwatch with Calibration by Digi-Sense

Combines a high-accuracy stopwatch with the ability to display time of day, a.m./p.m., date, and day of week. Also features an hourly chime and shock resistant ABS plastic housing.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory

Includes

One 1.5 V battery, lanyard, and NIST-traceable calibration certificate with data.

98766-78 Traceable® Digital Count Down Timer with Calibration; 99min/59s by Digi-Sense

Three-key operation makes this compact timer incredibly easy to learn and use. Timer counts down from 99 minutes, 59 seconds in 1 second increments. Alarm sounds for 30 seconds and then silences automatically. Unique memory resets display to last programmed time for quick repeat of frequent, routine tests.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Large, three-button operation for ease of use
• Count down timer from 99 min, 59 sec

Includes

Magnet, flip-open stand, clip, one AAA battery, and NIST-traceable calibration certificate with data.

35002-13 Waterproof/Shock-Resistant Digital Stopwatch with Calibration by Digi-Sense

Economical NIST-traceable stopwatch features split-mode timing to display the split-time while total timing continues. Alarm clock shows time of day and day of week. Water, dust, and shock resistant.

Includes:

NIST-traceable certificate based on a 24-hour period, 46"L neck cord, and 1.5 V button cell battery.

94450-00 Time-Controlled Power Outlet Strip by Digi-Sense

Outlet strips have four timer-controlled outlets and four manually-controlled outlets. Timer-controlled outlets are switched on and off byt he integral clock. Strips feature a rugged plastic housing, built-in circuit breaker, and a 4-ft (1.2-m) cord with grounded plug.

Mechanically controlled outlet strip 94450-00 features a 24-hour electromechanical time switch with integral trippers providing up to 96 on/off events per day.

94461-23 Traceable® Triple-Display Three-Channel Digital Timer with Calibration by Digi-Sense

Timer features three timer channels that can be used in any combination of up/down timing. Start all three channels at once or individually; distinct audible alarm sounds and "TIMES UP" flashes on the display when set time is reached. Memory function returns the display to the programmed time.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

Built-in stand, pocket clip, magnet, one 1.5 V button cell battery, and aNIST-traceable calibration certificate with data.

98768-34 8598 Replacement Cone Tip for 98767-07 by Digi-Sense

Choose from a wide range of accessories for your Digi-Sense tachometer including replacement wheels, tips, and tape.

98766-09 Traceable 300-Memory All Function Digital Stopwatch with Calibration by Digi-Sense

Three-line display on this multipurpose stopwatch/timer/chronograph shows running time, cumulative-split, and interval-split - simultaneously. Easily repeat functions of countdown alarm timing as a stopwatch. Set timer to count down at any time from 10 hours to 1 second. When zero is reached, the timer alarms and begins to count down again from the programmed time. The repeat cycle continues automatically, or until stopped.

Display always shows running time remaining to zero and cycles counted from 1 to 300. Stopwatch also includes pacer, stroke, and speed calculation functions. As a chronograph, the unit displays time of day in hours, minutes, and seconds, AM/PM, date, and day of the week. O-ring sealed water- and shock-resistant ABS plastic case has nonskid rubber edges.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Recall up to 300 memories both during and after event timing
• Set time-of-day alarm
• Pacer function works great for physical education tests

Includes

One 3 V button cell, lanyard, and NIST-traceable calibration certificate with data.

94460-06 Traceable® Lightweight Digital Stopwatch with Calibration by Digi-Sense

Weighs less than an ounce wear it all day without even knowing it's there! Stopwatch displays time and date and provides a sound confirmation each time a button is pressed.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

Neck cord, button cell battery, and NIST-traceable calibration certificate with data.

98768-35 8599 Replacement Funnel Tip for 98767-07 by Digi-Sense

Choose from a wide range of accessories for your Digi-Sense tachometer including replacement wheels, tips, and tape.

94460-25 Traceable® Radio-Controlled Digital Wall Clock with Calibration by Digi-Sense

Digital Radio Atomic Wall Clock displays month, date, day of the week, and time (hours, minutes, and seconds) in a.m./p.m. or 24-hour time. Also displays ambient temperature and relative humidity. LCD features digits 2-1/4" high for visibility from up to 20 feet away.

Clock is accurate to 1/10,000 of a second and relative humidity has a 1% resolution. Controlling radio signal from NIST in Boulder, Colorado automatically adjusts clock to precise time, daylight savings, leap year, and leap seconds.

Clock features signal indicators including four strength levels; RC synchronize process, weak signal quality, acceptable signal quality, and excellent signal quality.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Increase versitility with alarm and snooze options

Includes

Two AA batteries, wall-mount screw, and NIST-traceable calibration certificate with data.

08610-20 Traceable® Mount-Anywhere Analog Clock with Calibration; 1.6 inch Diameter by Digi-Sense

Small size and multiple mounting options makes this clock perfect for the individual work area. Includes hook-and-loop fastener and double-sided tape for wall/surface mounting; flat bottom lets you stand it on your shelf, bench, or desk. White numerals and sweeping second hand provide superior visibility.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Includes hook-and-loop strip and double-sided tape for fast and easy mounting

Includes

Hook-and-loop fastener, double-sided tape, battery, and NIST-traceable calibration certificate with data.

94460-04 Traceable® Count Up/Down Timer with Calibration by Digi-Sense

Count up/down timers can be programmed to count up or down to 100 hours with a 1-second interval. After the count down cycle, the timer counts up to indicate elapsed time and sounds an audible alarm when time has elapsed. Memory recalls the last setting for easy reuse. Timer can double as an alarm clock.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

Built-in stand, pocket clip, magnet, one 1.5 V button cell battery, and NIST-traceable calibration certificate with data.

94461-01 Traceable® Giant-Digit Countdown Digital Timer with Calibration by Digi-Sense

Easily see the time remaining from across the room with this giant-digit timer. Visible from shelves, in hoods, or on instruments. Intuitive, three-button operation lets you quickly get this timer up and running. Features Automatic Bounceback memory for repetitive timing operations. Timer counts up during alarm indicating elapsed time since alarming. Also counts up in stopwatch mode. Built-in easel stand and magnetic back give you multiple mounting options.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

Built-in stand, magnet, one AAA battery and NIST-traceable calibration certificate with data.

98766-10 60-Minute Analog Timer; 1/Ea by Digi-Sense

The timer's indicating pointer always shows the time remaining on an easy-to-read, tilted dial. Bell sounds at end of cycle.

• Simple analog dial can be set from 1 to 60 minutes
• Set pointer to desired time interval - time winds down automatically

94460-35 Traceable® Analog Wall Clock with Temperature, Humidity Dials, and Calibration by Digi-Sense

With precise quartz-crystal timing and temperature and humidity displays, this clock gives you the information that you need. Clock face diameter is 9" (22.9 cm) for easy viewing at a distance. Temperature and humidity dials are 3" (7.6 cm) in diameter. Bright orange second hand provides superior visibility.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory

Includes

Wall-mount screw, battery, and NIST-traceable calibration certificate with data.

94460-55 Traceable® Waterproof/Shock-Resistant Stopwatch with Calibration; Yellow by Digi-Sense

LCD digital stopwatch features O-ring-sealed and shock-resistant ABS plastic case that is waterproof to three atmospheres. Use as full-function stopwatch or 24-hour alarm clock/calendar.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

Neck cord, button cell battery,and NIST-traceable calibration certificate with data.

08649-10 Four-Channel, Jumbo-Display Clock/Timer by Digi-Sense

This timer allows you to count up to or down from 100 hours with 1-second resolution. This timer features a 3/4" high display and multiple channels that can be used simultaneously.

Each channel has a distinctive alarm that sounds for 1 minute, pressing any button will turn off the alarm. Timer memory recalls previous time set. Features time-of-day in 12- or 24-hour formats.

Features:

• Memory returns display to previously programmed countdown time with touch of a button
• Extra-loud alarms sound for 1 minute

Includes:

Magnetic clip, stand, and button cell battery.

08610-31 Traceable Clip-On/Key Chain Single-Channel Digital Timer with Calibration by Digi-Sense

Timer counts down in hours or minutes and also functions as a stopwatch. Acts as a handy reminder for meetings or tasks. The 1/3-inch four-digit display is easy to read. Features time-out function in both up and down counting. Weighs only 1/2 ounce. Features a chemical-resistant ABS case and a magnet for attaching to metal.

Products have an individually-numbered Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory

Includes

NIST-traceable calibration certificate with data, magnet, clip, key chain, and battery.