Crowcon

S011843 ASU Air Sampling Unit - for Xgard by Crowcon

The Air Sampling Unit (ASU) is designed to be used with Crowcon s Xgard range of detectors for monitoring potentially hazardous gases within ventilation ducts.

Features:

• Enables air ducts to be monitored without requiring the detector to be mounted within the duct.
• Avoid sensor drift due to air-flow effects.
• Simple, easy to install design.
• Simple detector maintenance: there is no need to access the duct for calibration purposes.
• Extremely reliable; ASU has no moving parts.

Specify power supply options from list. If planning to charge LIBRA lithium batteries ferrite E01083 must be fitted. This ferrite is supplied with all LIBRA batteries and all new TriplePlus+ units, but spares can also be bought separately.

203ST Hydrocarbon Open Path Detector (10-40 m), Xenon Flash by Crowcon

Open Path IR or "line of sight" optical gas detectors offer reliable detection of hydrocarbon gas emmissions over large areas. OPIR detectors detect gas hazards ranging from low level Parts Per Million (PPM) levels to Lower Exposure Limit (LEL) levels in hazardous areas.

Features:

• Hydrocarbon and H2S versions available
• Explosion proof to ATEX, UL and GOST-R Standards
• Choice of models for ranges of 0.6m up to 140m
• Aluminium or stainless steel construction
• 4-20mA or RS-485 operation, with alarm and fault relays available

312 Hydrocarbon Open Path Detector (7-30 m), Lamp Type by Crowcon

Open Path IR or "line of sight" optical gas detectors offer reliable detection of hydrocarbon gas emmissions over large areas. OPIR detectors detect gas hazards ranging from low level Parts Per Million (PPM) levels to Lower Exposure Limit (LEL) levels in hazardous areas.

Features:

• Hydrocarbon and H2S versions available
• Explosion proof to ATEX, UL and GOST-R Standards
• Choice of models for ranges of 0.6m up to 140m
• Aluminium or stainless steel construction
• 4-20mA or RS-485 operation, with alarm and fault relays available

QT-GP-01-ZZ Power Ready Q-Test, No Regulator by Crowcon

The Q-Test requires no power and is therefore ideally suited to remote users. Crews can now complete their functional check immediately prior to entry ensuring they are compliant. The power enabled option allows users to charge Gas-Pro on the move. Multiple mounting options and cylinder holder will enure that Gas-Pro is ready to protect workers when needed.

202ST Hydrocarbon Duct Mounting Open Path Detector (3-12 m), Xenon Flash by Crowcon

Open Path IR or "line of sight" optical gas detectors offer reliable detection of hydrocarbon gas emmissions over large areas. OPIR detectors detect gas hazards ranging from low level Parts Per Million (PPM) levels to Lower Exposure Limit (LEL) levels in hazardous areas.

Features:

• Hydrocarbon and H2S versions available
• Explosion proof to ATEX, UL and GOST-R Standards
• Choice of models for ranges of 0.6m up to 140m
• Aluminium or stainless steel construction
• 4-20mA or RS-485 operation, with alarm and fault relays available

C01961 Xsafe Safe Area Flammable Gas Detector, 4-20mA Version, 1/2" NPT, Methane by Crowcon

Xsafe is a cost effective solution for flammable gas detection in safe areas such as boiler rooms, kitchens and commercial buildings.

Features:

Rugged and reliable

• Constructed using corrosion resistant aluminium, 316 stainless steel or glass-reinforced nylon (Type 1 only)
• Ingress protection to IP65 as standard, IP66 with accessory
• IEC61508 SIL compliant

Low cost of ownership

• Plug-in sensor modules for quick and simple replacement
• Long-life sensors

Wide range of approvals

• ATEX, UL, IECEx and MED certified

Flexible installation options

• Wall or ceiling mounting as standard
• Accessories are available for duct mounting and sampling applications
• High temperature models available

204ST Hydrocarbon Open Path Detector (15-60 m), Xenon Flash by Crowcon

Open Path IR or "line of sight" optical gas detectors offer reliable detection of hydrocarbon gas emmissions over large areas. OPIR detectors detect gas hazards ranging from low level Parts Per Million (PPM) levels to Lower Exposure Limit (LEL) levels in hazardous areas.

Features:

• Hydrocarbon and H2S versions available
• Explosion proof to ATEX, UL and GOST-R Standards
• Choice of models for ranges of 0.6m up to 140m
• Aluminium or stainless steel construction
• 4-20mA or RS-485 operation, with alarm and fault relays available