$1000 - $2000, Modern Water

A00157 RaPID Assay PAHs 100 Test Tube Kit by Modern Water

RaPID Assay® is a rapid field or laboratory enzyme immunoassay method for the analysis of soil and water for remediation, assessment, and industrial testing.

Features:

• Rapid field testing procedure for analysis of soil and water samples
• Quantitative data results with excellent analytical precision
• Results available in approximately 60 minutes
• Tests up to 50 samples at once
• Magnetic particle immunoassay
• Training available
• EPA SW-846 method #4035

Test result type

• Quantitative, semi-quantitative or qualitative

Samples per kit

• 100 test kit (tests up to 80+ samples)

Assay range

• Soil: 0.2 ppm to 5 ppm as Phenanthrene
• Water: 2.66ppb to 66.5ppb as Phenanthrene
• Range can be extended with additional dilutions
• Site specific calibration required to meet total PAH analysis

Sample preparation

• Soil samples require prior extraction using the sample extraction kit (sold separately).
• The sample extraction kit provides materials for 12 soil sample extractions
• Water samples must be diluted three parts sample to one part methanol to prevent adsorptive loss

Sampling time

• Soil extraction time is typically two minutes per sample plus assay run time of approximately 60 minutes

Specificity

The total PAHs (sum of 16 PAH compounds) of the indicated contaminant types in soil samples are expressed below, at each of the three kit calibrator (standards) levels, in units comparable to results from GC method 8270 or HPLC method 8310.

The RaPIDAssay® PAH immunoassay test does not differentiate between phenanthrene and other polyaromatic hydrocarbons.The table below shows compounds at the limit of quantitation (LOQ) - an approximate concentration required to yield a positive result at the lowest standard.The IC50 is the concentration required to inhibit one-half of the colour produced by the negative control. It is also used to calculate cross-reactivity values to similar compounds.

Test kit components

• Antibody coated magnetic particles for analysis of 100 test tubes
• Diluent zero, wash, enzyme conjugate, colour development, stop reagents and wash solution
• Standards for 2, 10 and 50 ppb as Phenanthrene
• Kit control as 25 ppb as Phenanthrene
• Disposable test tubes
• Test kit instructions

Storage & precautions

• Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging
• Reagents must be stored at 39° to 46°F (4° to 8°C) when not in use
• Store at ambient temperature 64° to 81°F (18° to 27°C) is acceptable for day of use
• Kits must be brought to 64° to 81°F (18° to 27°C) before use
• Do not expose colour solution to direct sunlight

Required test materials

• PAH 100 test tube kit (A00157)
• Sample extraction kit(for soil samples only) (A00160EA)

Required test equipment

• RaPID Assay accessory kit which contains (6050100 (P)/6997010 (R)): RPA-II RaPID analyser (6000081), Printer (6000082), Magnetic separation rack (A00004C), Repeator pipet (A00008), Adjustable volume pipet (A00176), Vortex mixer (A00014), Portable balance (A00131), Digital timer (A00015)
• Repeator pipet tips (A00009)
• Adjustable pipet tips (A00013)

Other recommended materials

• Latex gloves
• Liquid and solid waste containers
• Calculator
• Absorbant paper for blotting
• Marking pen

AZF686060 Microtox Acute Starter Pack by Modern Water

Only available with purchase of M500 analyser. Includes the following:

• 1 AZF686018 Microtox® Acute Reagent 10 vials
• 1 AZF686011 Microtox® Diluent
• 1 AZF686019 Microtox® Osmotic Adjusting Sol'n
• 2 AZF686016 Microtox® Reconstitution Solution
• 1 686005 Disposable Glass Cuvettes: 400x

Product training at Modern Water

A00162 RaPID Assay Total BTEX / TPH 100 Tube Kit by Modern Water

RaPID Assay® is a rapid field or laboratory enzyme immunoassay method for the analysis of soil and water for remediation, assessment, and industrial testing.

Features:

• Rapid field testing procedure for analysis of soil and water samples
• Quantitative data results with excellent analytical precision
• Results available in approximately 60 minutes
• Training available
• Magnetic particle immunoassay
• Correlated to TPH methods (knowledge of fuel source required)

Test result type

• Quantitative, semi-quantitative or qualitative

Samples per kit

• 100 test kit (tests up to 80+ samples) (Five kit minimum order)

Assay range

• Soil: 0.9 ppm to 30 ppm as total BTEX standard
• Water: 0.02 to 3.0 ppm as total BTEX standard
• asTPH:range varies based on fuel source

Sample preparation

• Soil samples require prior extraction using the sample extraction kit (sold separately).
• The sample extraction kit provides materials for 12 soil sample extractions with methanol.

Sampling time

• Soil extraction time is typically two minutes per sample plus assay run time of approximately 60 minutes.

Specificity

The total BTEX/TPH concentrations of the indicated contaminant types in soil samples are expressed below, at each ofthe three kit calibrator levels, in units comparable to results from GC method 8015 (TPH).

The total BTEX/ TPH RaPID assay immunoassay test does not differentiate between BTEX and other petroleum hydrocarbons.The table below shows compounds at the limit of quantitation (LOQ) - an approximate concentration required to yield a positive result at the lowest standard. The IC50 is the concentration required to inhibit one-half of the colour produced by the negative control. It is also used to calculate cross-reactivity values to similar compounds.

Test kit components

• Antibody coated magnetic particles for analysis of 100 test tubes
• Zero standard, wash, enzyme conjugate, colour development and stop reagents
• Standards for 0.09, 0.35 and 3.0 ppm as total BTEX
• Kit control as 2.1 ppm as total BTEX
• Disposable test tubes

Storage & precautions

• Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging
• Reagents must be stored at 39° to 46°F (4° to 8°C) when not in use
• Store at ambient temperature 64° to 81°F (18° to 27°C) is acceptable for day of use
• Kits must be brought to 64° to 81°F (18° to 27°C) before use
• Do not expose colour solution to direct sunlight

Required test materials

• Total BTEX/TPH 100 tube kit (A00162)
• Sample extraction kit(for soil samples only) (A00165EB)
• Total BTEX sample diluent 100ml (as needed to increase range)

Required test equipment

• RaPID Assay accessory kit which contains (6050100 (P)/6997010 (R)): RPA-II RaPID analyser (6000111), Magnetic separation rack (A00004), Repeator pipet (A00008), Adjustable volume pipet (A00176), Vortex mixer (A00014), Portable balance (A00131), Digital timer (A00015)
• Repeator pipet tips (A00009)
• Adjustable pipet tips (A00013)

Other recommended materials

• Latex gloves
• Liquid and solid waste containers
• Calculator
• Absorbant paper for blotting
• Marking pen

A00134 RaPID Assay PCBs 100 Tube Kit by Modern Water

RaPID Assay® is a rapid field or laboratory enzyme immunoassay method for the analysis of soil and water for remediation, assessment, and industrial testing.

Features:

• Rapid field testing procedure for analysis of soil and water samples
• Quantitative data results with excellent analytical precision
• Results available in approximately 60 minutes
• Training available
• Magnetic particle immunoassay
• EPA SW-846 method #4020

Test result type

• Quantitative, semi-quantitative or qualitative

Samples per kit

• 100 test kit (tests up to 80+ samples)

Assay range

• Soil: 0.5 ppm to 10 ppm total PCB's as Aroclor 1254
• Water: 0.25 to 5.0 ppb total PCB s as Aroclor 1254
• Wipes: 5 to 100μg per wipe total PCB s as Aroclor 1254
• Range can be extended with additional dilutions

Sample preparation

• Soil samples require prior extraction using the sample extraction kit (sold separately).
• The sample extraction kit provides materials for 12 soil sample extractions with methanol.
• Water samples must be diluted one part sample to one part methanol to prevent adsorptive loss.

Sampling time

• Soil extraction time is typically two minutes per sample plus assay run time of approximately 60 minutes

Specificity

The table below shows compounds at the method detection limit(MDL) which isthe lowest concentration of the compound that can be picked up in the assay. The limit of quantification (LOQ)- an approximate concentration required to yield a positive result at the lowest standard. The IC50 is the concentration required to inhibit one-half of the colour produced by the negative control. It is also used to calculate cross-reactivity values to similar compounds.

Basic Test Procedure

• Add calibrators and sample, enzyme conjugate, and antibody coupled magnetic particles to a test tube. Vortex.
• Incubate for 15 minutes
• Using the RaPID magnetic separator, decant and wash two times
• Add colour solution and incubate for 20 minutes
• Stop the reaction and read colour at 450 nm
• Quantitive results and QC parameters are calculated and printed automatically using the RPA spectrophotometer

Test kit components

• Antibody coated magnetic particles for analysis of 100 test tubes
• Zero standard, wash, enzyme conjugate, colour development and stop reagents
• Standards for 0.25, 1.00 and 5.0 ppb as Aroclor 1254
• Kit control as 3.0 ppb as Aroclor 1254
• Disposable test tubes
• Test kit instructions

Storage & precautions

• Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging
• Reagents must be stored at 39° to 46°F (4° to 8°C) when not in use
• Store at ambient temperature 64° to 81°F (18° to 27°C) is acceptable for day of use
• Kits must be brought to 64° to 81°F (18° to 27°C) before use
• Do not expose colour solution to direct sunlight

Required test materials

• PCB Assay 100 tube kit (A00134)
• Sample extraction kit(for soil samples only) (A00137EB)
• Sample extraction kit(for wipe samples only) (A00137WB)
• PCB sample diluent 100mL (A00136)

Required test equipment

• RaPID Assay accessory kit which contains (6050100 (P)/6997010 (R)): RPA-I1 RaPID analyser (6000081), Printer (6000082), Magnetic separation rack (A00004), Repeator pipet (A00008), Adjustable volume pipet (A00176), Vortex mixer (A00014), Portable balance (A00131), Digital timer (A00015)
• Repeator pipet tips(12.5 mL) (A00009)
• Adjustable pipet tips (A00013)

Other recommended materials

• Latex gloves
• Liquid and solid waste containers
• Calculator
• Absorbant paper for blotting
• Marking pen

100-267 Recommended Spare Parts Kit for OVA7100 Pretreatment Acid only (no UV) by Modern Water

Includes

• acid digest stirrer assembly (motor + magnetic driver)
• spin bar
• acid digest magnets pack
• pretreatment cell maintenance pack

100-275F6S1 OVA7100 Dual Quarterly Maintenance Kit by Modern Water

Includes

• polishing kit (2)
• reference electrolyte solution 25ml
• olishing paper 2000grit
• fast pump head (6)
• slow pump head

Includes calibration and cleaning. Does not include transport costs (to and from Modern Water certified repair facility.)