$500 - $750, Jenco

6308CST Conductivity/SalinityTemperature Controller/Transmitter by Jenco

Our best selling 4-wire conductivity, salinity and temperature on-line transmitter/controller.

Conductivity/salinity analyzer, 1/4 DIN panel mount single parameter analyzer with an IP65 case, and 4-wire cells. Has programmable reference temperature and coefficients. The 4 to 20 mA output is fully programmable, reversible and isolated. There are 2 programmable relays for conductivity/salinity and one relay for temperature and an RS-485 (modbus) interface. Password & ID protected. Graphical display. 115/230 V AC.

• RS-485 (modbus) output
• Programmable relays for conductivity/salinity
• Reversible and isolated 4 to 20 mA output
• Programmable relay for temperature
• Conductivity/salinity/temp. measurement & control
• Simultaneous analysis and display for measurement and controls
• User programmable reference temperature temperature coefficient
• 4-wire cells for long cable length & wide measurement range

6250KC Handheld pH/mV/Ion/Temp. Meter Kit by Jenco

pH/mV/ION/Temp. microprocessor handheld meter in splash proof case with RS-232-C IBM compatible communications interface, BNC pH/mV/ION connector and 8-pin DIN ATC connector. AC/DC power. CE Approved.

Includes:

• 6250 Handheld pH/mV/Ion/Temp. Meter
• 600P pH electrode, 3-ft cable, BNC connector, Max Temp. 60° C
• 6230A-ST Stainless Steel Temperature Probe
• 6230D115 AC Adapter
• 6250F Carrying case

• CE approved
• RS-232c output
• Power down backup
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• High resolution ,4 1/2 digit readout
• Highly reliable mechanical touch keys with audio feedback
• Programmable resolution to 0.001/0.1 pH,1/0.1 mv
• Direct readout in ion concentration (calibration units conform to that of the calibration standard solutions)

6309PDTF pH/Temp/DO Analyzer Meter by Jenco

• Graphic LCD with manual backlight displays pH, dissolved oxygen,temperature, relay status and transmitter current mA output simultaneously.
• Automatic buffer recognition of US and European buffer sets.Calibration data is stored in memory and is ready for use on power up.
• Isolated and reversible 4-20 mA current output for pH/ dissolved oxygen allows it to be used as a proportional output.
• 5 programmable on/off relays: 2 for pH, 2 for dissolved oxygen and 1 for temperature.
• RS-485 output for remote access via an compatible computer allows multiple units to be connected and ganged together.
• Password protection.
• IP65 watertight case.

6377MK Benchtop pH/Conductivity/Temperature Meter Kit with Memory by Jenco

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter is the Multi-parameter meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Well-designed, Inside and Out

The Basis Series pH/EC Multi-parameter meter forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Renowned Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with 0.01 pH and 0.1 mV resolution
• Repeatable, accurate results achieved with up to 5 points NIST or US buffer calibration for pH, 1 point ORP and 1 point Conductivity offset calibration.
• Non-volatile memory holds up to 750 data points.
• Each and every unit is hand calibrated and QC ed by at least 2 teams

Upgraded User Experience and Usability

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter uses a standard BNC connector for pH and ORP so it works with a vast majority of electrodes available on the market. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• BNC connector for pH or ORP electrodes
• 8-Pin DIN for temperature and conductivity probe

Kit Includes:

• 6377M - Benchtop pH/Conductivity/Temperature Meter with Memory
• 109L - Glass/Platinum, W/ 8-Pin Connector, K=1.0
• 600P - pH Electrode, 3-ft Cable, BNC Connector, Max Temp. 60 Deg. C
• 6230D115 - AC Adapter, 9 VDC, Center Negative

3177MBK Bluetooth, Benchtop, Conductivity/Temperature/TDS Meter Kit by Jenco

5th generation conductivity / salinity / TDS / temperature Bluetooth benchtop meter with iOS and Android tablet connectivity

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Our 5th generation benchtop series consists of single and multi-parameter models, with or without Bluetooth connectivity. The 3177B is a single parameter conductivity / salinity / TDS / temperature Bluetooth benchtop meter that pairs with iOS and Android tablets to enable the same user experience as users' favorite apps while providing graphing, guided calibration procedures, GLP-compliant data storage, data sharing, cloud data storage and user-defined compliance policies.

Renowned Accuracy and Repeatability

Repeatable, accurate results achieved with conductivity calibration points in multiple ranges.

• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• CE, FCC ID, RoHS complaint

App-Enhanced Productivity

Free iOS and Android apps are as easy and convenient to use as users' favorite apps, and allow complete control of all on-meter functionality plus guided calibration procedures and much more.

Great User Experience

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

Standard 8-pin DIN for conductivity and temperature electrodes.

Easily Share Data Locally or to the Cloud

Share stored data to other apps such as Notes and Evernote or to cloud services such as Google Docs.

High Information Availability

Display conductivity, salinity or TDS with temperature readings simultaneously with last calibration date and real-time graphing.

GLP-Compliant Data Storage

Greater than10k Sets of conductivity, salinity, TDS and temperature data plus calibration data such as calibration date, buffers used, calibration slopes and calibration offsets.

Kit Includes:

• 3177M - Benchtop, Conductivity/Temperature/TDS Meter with Memory
• 109L - Glass/Platinum, Conductivity Sensor, K=0.1, 8-Pin Connector
• 110/240VAC - 110 ~ 240V Power Adapter

9173K Large LCD Polarographic Dissolved Oxygen Benchtop Meter Kit by Jenco

Dissolved Oxygen benchtop meter with extra large LCD display for ease of use. The meter uses polarographic type sensor with replaceable membranes and programmable pressure compensation, 600 to 1000 mBar and salinity compensation, 0 to 40.0 ppt. Communications is via. Features dual LCD displays for D.O. and temperature. ATC is a 10k thermistor. Power is 115/230V AC or by battery.

Includes:

• 9173 Large LCD Polarographic Dissolved Oxygen Benchtop Meter
• LD-900-7-DO Laboratory D.O. Probe with 8-Pin Connector
• LD-900-03A Membrane Kit with 6 Caps & KCL Solution
• 6230D115 AC Adapter

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Clear LCD displays D.O. as percent air saturation or D.O. as parts per thousand, simultaneously with temperature.
• Manual or automatic temperature compensated (ATC) D.O. readings.
• User selectable salinity and pressure compensated D.O. readings.
• Works with accurate and reliable polarographic D.O. probes.
• Convenient one point calibration for D.O. calibration data is stored in memory and is ready for use on power up.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• 8pin DIN connector for D.O. and thermistor.
• AC adaptor or battery power.

6377 Benchtop Conductivity Meter Kit by Jenco

Kit Includes:

• 6377 - Benchtop pH/Conductivity/Temperature Meter
• 109L - Glass/Platinum, W/ 8-Pin Connector, K=1.0 Cell Constant
• 600P - pH Electrode, 3-ft Cable, BNC Connector, Max Temp. 60 Deg. C
• 6230D115 - AC Adapter, 9 VDC, Center Negative

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter is the Multi-parameter meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Well-designed, Inside and Out

The Basis Series pH/EC Multi-parameter meter forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Renowned Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with 0.01 pH and 0.1 mV resolution
• Repeatable, accurate results achieved with up to 5 points NIST or US buffer calibration for pH, 1 point ORP and 1 point Conductivity offset calibration.
• Non-volatile memory holds up to 750 data points.
• Each and every unit is hand calibrated and QC ed by at least 2 teams

Upgraded User Experience and Usability

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter uses a standard BNC connector for pH and ORP so it works with a vast majority of electrodes available on the market. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• BNC connector for pH or ORP electrodes
• 8-Pin DIN for temperature and conductivity probe

3107K Benchtop Meter with RS-232 Interface Kit by Jenco

The Jenco Model 3107 bench type Conductivity, Salinity, Temperature System is a rugged, microprocessor based instrument designed for use in field laboratories and process control applications, using a four electrode cell, it is an essential tool for precise measurements of conductivity, salinity and temperature.

Includes:

• 3107 Benchtop Meter with RS-232 Interface
• K=1 Cond. Probe
• 6007D115 AC Adapter

3177MBKA Bluetooth, Benchtop, Conductivity/Temperature/TDS Meter Kit by Jenco

5th generation conductivity / salinity / TDS / temperature Bluetooth benchtop meter with iOS and Android tablet connectivity

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Our 5th generation benchtop series consists of single and multi-parameter models, with or without Bluetooth connectivity. The 3177B is a single parameter conductivity / salinity / TDS / temperature Bluetooth benchtop meter that pairs with iOS and Android tablets to enable the same user experience as users' favorite apps while providing graphing, guided calibration procedures, GLP-compliant data storage, data sharing, cloud data storage and user-defined compliance policies.

Renowned Accuracy and Repeatability

Repeatable, accurate results achieved with conductivity calibration points in multiple ranges.

• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• CE, FCC ID, RoHS complaint

App-Enhanced Productivity

Free iOS and Android apps are as easy and convenient to use as users' favorite apps, and allow complete control of all on-meter functionality plus guided calibration procedures and much more.

Great User Experience

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

Standard 8-pin DIN for conductivity and temperature electrodes.

Easily Share Data Locally or to the Cloud

Share stored data to other apps such as Notes and Evernote or to cloud services such as Google Docs.

High Information Availability

Display conductivity, salinity or TDS with temperature readings simultaneously with last calibration date and real-time graphing.

GLP-Compliant Data Storage

Greater than10k Sets of conductivity, salinity, TDS and temperature data plus calibration data such as calibration date, buffers used, calibration slopes and calibration offsets.

Kit Includes:

• 3177M - Benchtop, Conductivity/Temperature/TDS Meter with Memory
• 109L - Glass/Platinum, Conductivity Sensor, K=0.1, 8-Pin Connector
• 110/240VAC - 110 ~ 240V Power Adapter
• 007A - Alumimum Swing Arm

3177MBKB Bluetooth, Benchtop, Conductivity/Temperature/TDS Meter Kit by Jenco

5th generation conductivity / salinity / TDS / temperature Bluetooth benchtop meter with iOS and Android tablet connectivity

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Our 5th generation benchtop series consists of single and multi-parameter models, with or without Bluetooth connectivity. The 3177B is a single parameter conductivity / salinity / TDS / temperature Bluetooth benchtop meter that pairs with iOS and Android tablets to enable the same user experience as users' favorite apps while providing graphing, guided calibration procedures, GLP-compliant data storage, data sharing, cloud data storage and user-defined compliance policies.

Renowned Accuracy and Repeatability

Repeatable, accurate results achieved with conductivity calibration points in multiple ranges.

• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• CE, FCC ID, RoHS complaint

App-Enhanced Productivity

Free iOS and Android apps are as easy and convenient to use as users' favorite apps, and allow complete control of all on-meter functionality plus guided calibration procedures and much more.

Great User Experience

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

Standard 8-pin DIN for conductivity and temperature electrodes.

Easily Share Data Locally or to the Cloud

Share stored data to other apps such as Notes and Evernote or to cloud services such as Google Docs.

High Information Availability

Display conductivity, salinity or TDS with temperature readings simultaneously with last calibration date and real-time graphing.

GLP-Compliant Data Storage

Greater than10k Sets of conductivity, salinity, TDS and temperature data plus calibration data such as calibration date, buffers used, calibration slopes and calibration offsets.

Kit Includes:

• 3177M - Benchtop, Conductivity/Temperature/TDS Meter with Memory
• 101C - Epoxy/Carbon, 8-Pin Connector, K=0.475
• 110/240VAC - 110 ~ 240V Power Adapter

3177MBKBA Bluetooth, Benchtop, Conductivity/Temperature/TDS Meter Kit by Jenco

5th generation conductivity / salinity / TDS / temperature Bluetooth benchtop meter with iOS and Android tablet connectivity

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Our 5th generation benchtop series consists of single and multi-parameter models, with or without Bluetooth connectivity. The 3177B is a single parameter conductivity / salinity / TDS / temperature Bluetooth benchtop meter that pairs with iOS and Android tablets to enable the same user experience as users' favorite apps while providing graphing, guided calibration procedures, GLP-compliant data storage, data sharing, cloud data storage and user-defined compliance policies.

Renowned Accuracy and Repeatability

Repeatable, accurate results achieved with conductivity calibration points in multiple ranges.

• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• CE, FCC ID, RoHS complaint

App-Enhanced Productivity

Free iOS and Android apps are as easy and convenient to use as users' favorite apps, and allow complete control of all on-meter functionality plus guided calibration procedures and much more.

Great User Experience

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

Standard 8-pin DIN for conductivity and temperature electrodes.

Easily Share Data Locally or to the Cloud

Share stored data to other apps such as Notes and Evernote or to cloud services such as Google Docs.

High Information Availability

Display conductivity, salinity or TDS with temperature readings simultaneously with last calibration date and real-time graphing.

GLP-Compliant Data Storage

Greater than10k Sets of conductivity, salinity, TDS and temperature data plus calibration data such as calibration date, buffers used, calibration slopes and calibration offsets.

Kit Includes:

• 3177M - Benchtop, Conductivity/Temperature/TDS Meter with Memory
• 101C - Epoxy/Carbon, 8-Pin Connector, K=0.475
• 110/240VAC - 110 ~ 240V Power Adapter
• 007A - Alumimum Swing Arm

3177MKA Benchtop Conductivity Meter Kit by Jenco

The Basis Series Conductivity/TDS/Salinity benchtop is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Low cost of ownership

The Basis Series Conductivity/TDS/Salinity meter, along with the pH/mV model, forms the foundation of Jenco s benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop Conductivity/TDS/Salinity Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with ±0.5% full scale accurate across entire measurement range
• Uses 2-wire conductivity cells with adjustable k=0.1 or 4-wire conductivity cells k=0.475 cell constants for improved flexibility and accuracy
• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• Simple one point calibration

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Convenient one point calibration
• Automatically determines the best conductivity ranges to display readings
• Well-situated keys with tactile feedback
• Splash-resistant case made with durable, reinforced plastic for added protection
• AC adaptor or battery powered

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series Conductivity/TDS/Salinity meter uses a common Jenco 8-pin DIN connector so it works with our other conductivity electrodes. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• Splash-resistant case is made with durable, reinforced plastic for added protection
• 8-pin DIN connector for conductivity cell & 10k thermistor
• Optional, detached electrode arm

Kit Includes:

• 3177M - Benchtop, Conductivity/Temperature/TDS Meter with Memory
• 109L - Glass/Platinum, Conductivity Sensor, K=0.1, 8-Pin Connector
• 110/240VAC - 110 ~ 240V Power Adapter
• 007A - Alumimum Swing Arm

3177MKBA Benchtop Conductivity Meter Kit by Jenco

The Basis Series Conductivity/TDS/Salinity benchtop is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Low cost of ownership

The Basis Series Conductivity/TDS/Salinity meter, along with the pH/mV model, forms the foundation of Jenco s benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop Conductivity/TDS/Salinity Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with ±0.5% full scale accurate across entire measurement range
• Uses 2-wire conductivity cells with adjustable k=0.1 or 4-wire conductivity cells k=0.475 cell constants for improved flexibility and accuracy
• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• Simple one point calibration

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Convenient one point calibration
• Automatically determines the best conductivity ranges to display readings
• Well-situated keys with tactile feedback
• Splash-resistant case made with durable, reinforced plastic for added protection
• AC adaptor or battery powered

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series Conductivity/TDS/Salinity meter uses a common Jenco 8-pin DIN connector so it works with our other conductivity electrodes. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• Splash-resistant case is made with durable, reinforced plastic for added protection
• 8-pin DIN connector for conductivity cell & 10k thermistor
• Optional, detached electrode arm

Kit Includes:

• 3177M - Benchtop, Conductivity/Temperature/TDS Meter with Memory
• 101C - Epoxy/Carbon, 8-Pin Connector, K=0.475
• 110/240VAC - 110 ~ 240V Power Adapter
• 007A - Alumimum Swing Arm

3250MK Handheld Conductivity Meter Kit by Jenco

Includes:

• 3250M Handheld Conductivity Meter
• K=1 Cond. Probe
• 6230D115 AC Adapter
• Carrying Case

• Clear LCD displays conductivity, salinity or TDS, simultaneously with temperature.
• Convenient one point calibration. Calibration data is stored in memory and is ready for use on power up.
• Accepts 2-wire and 4-wire conductivity cells with k=0.1, k=1.0 and K=10.0 cell constants for improved flexibility and accuracy.
• Inclined back provides ideal viewing angle for benchtop use.
• 50 memory storage of conductivity, salinity, TDS with temperature reading with memory location ID.
• RS-232 computer interface with software.
• IP65 waterproof.
• AC adaptor or battery power (low battery indicator).

3250NK Cond/Sal/Temp Meter with RS-232 Computer Interface Kit by Jenco

Includes:

• 3250N Cond/Sal/Temp Meter with RS-232 Computer Interface
• 106 Glass/Platinum, with 8-pin connector, K=1.0
• 6230D115 AC Adapter
• 3250F Carrying Case

6179M Digital pH/mV/Ion/Temperature Meter by Jenco

The Basis Series 6179M pH/ORP/ION/Temperature benchtop meter is the Multi-parameter meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Well-designed, Inside and Out

The Basis Series 6179M pH/ORP/ION/Temperature Multi-parameter meter forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Renowned Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with 0.01 pH and 0.1 mV resolution
• Repeatable, accurate results achieved with up to 5 point NIST or US buffer calibration for pH, 1 point for mV and 2 to 5 point for ION calibration.
• Non-volatile memory holds up to 750 data points.
• Each and every unit is hand calibrated and QC ed by at least 2 teams
• CE, RoHS complaint

Upgraded User Experience and Usability

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series pH/ORP/ION//Temperature benchtop meter uses a standard BNC connector so it works with a vast majority of electrodes available on the market. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• BNC connector for pH, ORP electrode or ISE
• 8-Pin DIN for temperature probe

6179MB Digital pH/mV/Ion/Temperature Meter by Jenco

Our 5th generation benchtop series consists of single and multi-parameter models, with or without Bluetooth connectivity. The 6179MB is a multi-parameter pH/ORP/ION/temperature Based Bluetooth Benchtop Meter that pairs with iOS and Android tablets to enable the same user experience as users' favorite apps while providing graphing, guided calibration procedures, data sharing, cloud data storage and user-defined compliance policies.

Renowned Accuracy and Repeatability

Repeatable, accurate results achieved with up to 5 points NIST or US buffer calibration for pH, 1 point mV offset calibration, 2 to 5 points calibration for ION.

• Repeatable readings with 0.01 pH and 0.1 mV resolution
• Simple calibration with automatic buffer recognition of US and European buffers
• Non-volatile memory holds up to 750 data points.
• Each and every unit is hand calibrated and QC ed by at least 2 teams
• CE, FCC ID, RoHS complaint

App-Enhanced Productivity

Free iOS and Android apps are as easy and convenient to use as users' favorite apps, and allow complete control of all on-meter functionality plus guided calibration procedures and much more.

Great User Experience

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• New aesthetical desgin, rugged detachable electrode holder arm

Improved Electrode Serviceability and Low Cost of Ownership

Standard BNC connector for pH, ORP or ION electrodes and temperature electrodes.

• BNC connector for pH, ORP or ION electrodes
• 8-Pin DIN for temperature probe

Easily Share Data Locally or to the Cloud

Share stored data to other apps such as Notes and Evernote or to cloud services such as Google Docs.

High Information Availability

Display pH, ORP and ION with temperature readings simultaneously with electrode efficiency, last calibration date and real-time graphing.

GLP-Compliant Data Storage

750 Sets of pH, ORP or ION and temperature data plus calibration data such as calibration date, buffers used, calibration slopes and calibration offsets.

6179MK Digital pH/mV/Ion/Temperature Meter Kit by Jenco

The Basis Series 6179M pH/ORP/ION/Temperature benchtop meter is the Multi-parameter meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Well-designed, Inside and Out

The Basis Series 6179M pH/ORP/ION/Temperature Multi-parameter meter forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Renowned Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with 0.01 pH and 0.1 mV resolution
• Repeatable, accurate results achieved with up to 5 point NIST or US buffer calibration for pH, 1 point for mV and 2 to 5 point for ION calibration.
• Non-volatile memory holds up to 750 data points.
• Each and every unit is hand calibrated and QC ed by at least 2 teams
• CE, RoHS complaint

Upgraded User Experience and Usability

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series pH/ORP/ION//Temperature benchtop meter uses a standard BNC connector so it works with a vast majority of electrodes available on the market. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• BNC connector for pH, ORP electrode or ISE
• 8-Pin DIN for temperature probe

Kit Includes:

• 6179M - Digital pH/mV/Ion/Temp Meter
• GB717DJ-P - pH Electrode, 3-ft Cable, Coil, RF, BNC Connector
• 110/240VAC - 110-240V Power Adapter

6179MKA Digital pH/mV/Ion/Temperature Meter Kit by Jenco

The Basis Series 6179M pH/ORP/ION/Temperature benchtop meter is the Multi-parameter meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Well-designed, Inside and Out

The Basis Series 6179M pH/ORP/ION/Temperature Multi-parameter meter forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Renowned Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with 0.01 pH and 0.1 mV resolution
• Repeatable, accurate results achieved with up to 5 point NIST or US buffer calibration for pH, 1 point for mV and 2 to 5 point for ION calibration.
• Non-volatile memory holds up to 750 data points.
• Each and every unit is hand calibrated and QC ed by at least 2 teams
• CE, RoHS complaint

Upgraded User Experience and Usability

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series pH/ORP/ION//Temperature benchtop meter uses a standard BNC connector so it works with a vast majority of electrodes available on the market. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• BNC connector for pH, ORP electrode or ISE
• 8-Pin DIN for temperature probe

Kit Includes:

• 6179M - Digital pH/mV/Ion/Temp Meter
• GB717DJ-P - pH Electrode, 3-ft Cable, Coil, RF, BNC Connector
• 6230AST - Stainless Steel Temperature Probe 10k Ω Thermistor, 8-Pin Din Connector
• 110/240VAC - 110-240V Power Adapter

6219KA Digital pH/mV/Ion/Temp Meter Kit by Jenco

Includes:

• 6219 Digital pH/mV/ION/TEMP Meter
• 600P pH Electrode
• 6230D115 AC Adapter

• Two LCD display pH, mV, direct ion concentration and temperature.
• Convenient calibration with automatic buffer recognition of US or European pH buffer sets. Quick two points ion calibration. Calibration data is stored in memory and is ready for use on power up.
• User selectable resolution of up to 0.001 for greatest accuracy.
• Direct read out in ion concentration to simplify ion measurements.
• RS-232 computer interface with software.
• AC adaptor or battery power (low battery indicator).

6219KB Digital pH/mV/Ion/Temp Meter Kit by Jenco

Includes:

• 6219 Digital pH/mV/ION/TEMP Meter
• 6005C Cable
• 6230D115 AC Adapter

• Two LCD display pH, mV, direct ion concentration and temperature.
• Convenient calibration with automatic buffer recognition of US or European pH buffer sets. Quick two points ion calibration. Calibration data is stored in memory and is ready for use on power up.
• User selectable resolution of up to 0.001 for greatest accuracy.
• Direct read out in ion concentration to simplify ion measurements.
• RS-232 computer interface with software.
• AC adaptor or battery power (low battery indicator).

6219KB Digital pH/mV/Ion/Temp Meter Kit by Jenco

Includes:

• 6219 Digital pH/mV/ION/TEMP Meter
• 6005C Cable
• 6230A-ST Temp. Probe
• 6230D115 AC Adapter

• Two LCD display pH, mV, direct ion concentration and temperature.
• Convenient calibration with automatic buffer recognition of US or European pH buffer sets. Quick two points ion calibration. Calibration data is stored in memory and is ready for use on power up.
• User selectable resolution of up to 0.001 for greatest accuracy.
• Direct read out in ion concentration to simplify ion measurements.
• RS-232 computer interface with software.
• AC adaptor or battery power (low battery indicator).

6250KB Handheld pH/mV/Ion/Temp. Meter Kit by Jenco

pH/mV/ION/Temp. microprocessor handheld meter in splash proof case with RS-232-C IBM compatible communications interface, BNC pH/mV/ION connector and 8-pin DIN ATC connector. AC/DC power. CE Approved.

Includes:

• 6250 Handheld pH/mV/Ion/Temp. Meter
• 6000P pH/Ref./Temperature Probe
• 6005C Extension Cable, 4-Pin to BNC & 8-Pin DIN, 3-ft
• 6230D115 AC Adapter
• 6250F Carrying case

• CE approved
• RS-232c output
• Power down backup
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• High resolution ,4 1/2 digit readout
• Highly reliable mechanical touch keys with audio feedback
• Programmable resolution to 0.001/0.1 pH,1/0.1 mv
• Direct readout in ion concentration (calibration units conform to that of the calibration standard solutions)

6307 Benchtop pH/Conductivity Meter with RS-232 by Jenco

pH/Conductivity/Salinity/Temperature benchtop meter with dual LCD displays for conductivity and r pH/mV/temp. Features cell adjust and 4.01/7.00/10.01 buffer select.

• Dual LCDs display pH, conductivity, or salinity, simultaneously with temperature.
• Accepts 2-wire and 4-wire conductivity cells with k=1 or k=5 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 4 conductivity ranges are available for improved usability.
• Convenient calibration with automatic buffer recognition of us or european pH buffer sets. quick one point conductivity calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual compensation when temperature probe is not present.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Indication for electrode slope and electrode offset for optimized electrode maintenance.
• Splash resistant case is made with durable, reinforced plastic for added protection.
• RS-232 computer interface with software.
• BNC connector for pH/reference pH and mv.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• Separate pin plug connector for reference pH.
• AC adaptor or battery power.