BW Technologies Monitors

MCXL-XWHM-B-NA GasAlertMicroClip XL Detector Combustible (%LEL), Oxygen (O2), Hydrogen Sulfide (H2S), Carbon Monoxide (CO) - Black Housing by BW Technologies

The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards. For standard operation with features you can count on, opt for the GasAlertMicroClip XT. For extended battery life, especially in cold weather, choose the GasAlertMicroClip XL. Both offer visual compliance at a glance with the flashing, green IntelliFlash™. Easy onebutton operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW's MicroDock II automatic test and calibration system and Fleet Manager II software.

• Easy and comfortable to wear; thin and lightweight
• Easy operation and straightforward training with one-button simplicity
• Easy visual compliance with flashing, green IntelliFlash™
• Easy and cost effective to own

Additional GasAlertMicroClip features:

• Choose the GasAlertMicroClip XL for cold weather performance
• IntelliFlash™ verifies operation and compliance to both the user and supervisor
• Tamper-proof, one button operation
• Powered by a rechargeable lithium polymer battery

Standard features of BW multi-gas products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your fleet using Fleet Manager II

Part Number: MC2XWHMBNA

QT-XWHM-R-Y-NA-CS GasAlertQuattro Premium Confined Space Kit with Instrument and Calibration Gas

If do not already own the standard four gas version of the GasAlertQuattro and are also in need of the confined space kit, then this is the best version to order.

Why?

The short answer is that it is easier and faster.

Unlike the Deluxe Confined Space Kit version (QT-CK-DL) which doesn't include the instrument or calibration gas, this version includes both. No need to order a separate monitor and separate calibration gas cylinder. The monitor is the standard CO,H2S,O2,LEL configuration, and the calibration cylinder that comes with it is the CG-Q34-4 which contains 100PPM CO, 25 PPM H2S, 18%/Vol O2, and 50% LEL CH4 (Methane). The reason there are two different confined space kits is that the Deluxe Confined Space Kit (QT-CK-DL) was designed for customers that already own the monitor and need to add the kit as an after market purchase, or customers that are purchasing a configuration other than the standard four gas.

What is included?

• QT-XWHM-R-Y-NA Rechargeable GasAlertQuattro with CO(Carbon Monoxide), H2S(Hydrogen Sulfide), O2(Oxygen), and LEL(Methane) sensors
• CG-Q34-4 Calibration cylinder
• REG-0.5 Regulator - 0.5 Liters per minute flowrate
• Rugged Aluminum Carrying Case
• Wall Charging Adaptor
• Auxiliary Filter Kit
• Calibration cap with 1 foot of tubing
• IR Connectivity Kit with Fleetmanager II software
• Manual Aspirator Kit
• Sampling Probe
• Both Rechargeable and Alkaline battery packs for greater versatility

MCXL-X00M-B-AU GasAlertMicroClip XL Detector, Oxygen (O2), Carbon Monoxide (CO) - Black Housing, AU Version (Australia) by BW Technologies

The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards. For standard operation with features you can count on, opt for the GasAlertMicroClip XT. For extended battery life, especially in cold weather, choose the GasAlertMicroClip XL. Both offer visual compliance at a glance with the flashing, green IntelliFlash™. Easy onebutton operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW's MicroDock II automatic test and calibration system and Fleet Manager II software.

• Easy and comfortable to wear; thin and lightweight
• Easy operation and straightforward training with one-button simplicity
• Easy visual compliance with flashing, green IntelliFlash™
• Easy and cost effective to own

Additional GasAlertMicroClip features:

• Choose the GasAlertMicroClip XL for cold weather performance
• IntelliFlash™ verifies operation and compliance to both the user and supervisor
• Tamper-proof, one button operation
• Powered by a rechargeable lithium polymer battery

Standard features of BW multi-gas products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your fleet using Fleet Manager II

Part Number: MCXLX00MBAU

Part Number: MC2FPCB1

Greater performance with more options for your gas detecting equipment fleet

With IntelliDox systems, you enjoy the benefits of smart docking technology with your Fleet Manager II software program. Compatible units can easily be managed and tracked automatically, to increase overall efficiency.

Instrument management made easy

It won't take long to install the new IntelliDox smart docking system. In fact, the entire installation process takes a couple of minutes or less. Because each module can be operated separately (with separate operating systems, pumps, and readout screens) you can multi-task. For example, it is possible to bump test 2 detectors while you perform calibration on 3 detectors.

Flexibility at your fingertips

Many of the IntelliDox parameters are simple to set, including the high and low alarm set points. This ensures that your gas detectors will never let you down during their entire service lives.

Network and track your data efficiently and conveniently

With both Ethernet and USB options, you can easily store bump testing and peak exposure data.

• Maintenance free detectors - new customizing options
• Track workers and control set points for alarms
• Add on to your docking system (up to 5 modules total)
• Fast and simple setup

Compatibility

BW Clip Series
GasAlertMicroClip Series
ConneX1

Unmatched Bump Testing Performance

Thanks to FastBump, it takes very little time to take care of all bump testing compliance issues. Efficient and economical system saves on test gas and optimizes the entire process

IntelliDoX Features:

• Bump tests, configuration, calibrating, and record-keeping support for compatible units. These settings are user updatable: Schedule Calibration Reminders and Bump Tests; Update Firmware; Gas level Reading Display During Alarm; Event Logs Transfer; Alarm Settings; Enable/Disable Non-compliance Indicator; Hibernation; Preferences for Time Display
• Simple Ethernet network connecting
• Gang as many as 5 modules - each unit has keypad and LCD screen for independent use
• Best FastBump test in the industry. Saves on gas and eliminates bottleneck issues
• No tools needed for setup
• No need for network access to configure or transfer data, thanks to USB port
• Span calibration and bump tests is automatic

IntelliDoX Specs

Size (One module): 5.4 in (13.8 cm) width - 14.2 in (36.2 cm) height - 4.3 in (10.9 cm) depth
Power supply: 12 volt / 8.33A ITE Power Supply
Weight: 4.2 pounds (1.91 kg)
Real-time clock: Date & time stamp
Communications method: Detector and docking module have 2-way (infrared) communication capabilities

External interface

• Ethernet port - 1
• USB port - 1

Menu navigation

• Adjust display settings
• Adjust date & time
• Configure gas inlets
• Review IntelliDoX module
• Password protection (optional)
• Configure UI display language: English, German, Portuguese, Spanish, French

Automatic tests

• Standard bump test: takes 10 seconds
• Fastbumpump: takes 40 seconds

Data Storage: 2 GB internal storage capacity

Pump

• Independent pump for each IntelliDoX module
• Flow Rate is 350 ml/min

Instrument Management System: Fleet Manager II (4.0 and higher)

Ratings: This device complies with the FCC Part 15 and ICES-003 Canadian EMI requirements. Operation is subject to these conditions: (1) Each device may not cause harmful interference, and (2) Each device must accept interference received (including any interference causing undesired operation).

Warranty: Full two years

Options and Accessories

Fully Portable Kit for IntelliDoX test station - comes with a Pelican case. Each kit contains: two docking modules, AC power adaptor, demand flow regulator, ethernet cable, tubing and more.

Multi-Inlet Key

You can configure a single IntelliDoX module to connect multiple calibration gases

A complete list of accessories and kits is available.

DUE TO PRODUCT IMPROVEMENT AND ONGOING RESEARCH, SPECIFICATIONS MAY CHANGE WITHOUT NOTICE.

Part Number: DX-MCLP

BW Technologies Replacement Oxygen (O2) Sensor

The BW Technologies Replacement Oxygen Sensor is a highly effective replacement accessory. It has a sensor range of 0 to 30% with a 0.1% resolution. The replacement sensor is operational in a temperature range of -4 to 122 degrees Fahrenheit. It is compatible with some of the BW Technologies devices. BW Technologies replacement sensors are reliable and dependable and backed by solid performance. To ensure optimal compatibility, please consult your product specification sheet.

Part Number: SRX10C1

Part Number: CG2H2534

BW Technologies IR Connectivity Kit with Fleet Manager II Software

The BW Technologies IR Connectivity Kit connects your BW Technologies device to your computer. The kit also includes the Fleet Manager II Software. The software allows users to download data directly from their device to their computer. Downloading is quick and easy with the connectivity kit. From here, users can create and run a variety of reports that help with site assessments and analysis. The information can also be easily archived for future referencing.

Part Number: GAUSB1IR

Part Number: SR-W04-75

M5IR-XWBY-R-P-D-Y-N-00 GasAlertMicro 5 IR Detector CO2 (IR), %LEL, O2, H2S, CO - NiMH Battery, Pump and Datalogging by BW Technologies

The GasAlertMicro 5 Series is the most customizable gas monitoring series on the market. With an extensive selection of models, user options, and instrument settings, this multi-gas detector series is an industry leader. BW Technologies by Honeywell recognizes that not all worksites can operate with a one size fits all model of gas detection devices. With the introduction of the GasAlertMicro 5 Series multi-gas detectors, worksites, managers, and users can utilize the customizable features to ensure that the instrument meets their specific worksite needs.

GasAlertMicro 5 Series models

This multi-gas monitor series is available in several models: the standard toxic gas model, a PID model for detection of VOCs, or an IR model for CO2 detection. The unit accurately and reliably identifies up to five atmospheric hazards simultaneously and can rapidly switch from diffusion mode to the optional integrated pump.

Each model of GasAlertMicro 5 Series has several distinct features. With the GasAlertMicro 5 Series, the standard toxic gas model, users can monitor several standard gases with a plug in electrochemical cell sensor and catalytic cell sensor and a typical battery life of 20 hours (AA Alkaline rechargeable). The GasAlertMicro 5 PID is standard with several gas detections, a plug in electrochemical cell sensor and photoionization detector, and a battery life of approximately 15 hours (AA Alkaline rechargeable). Finally, the GasAlertMicro 5 IR features specific gas detection ranges, a plug in electrochemical cell sensor, a catalytic cell sensor, and an infrared sensor for carbon dioxide monitoring. This model also has a battery life of approximately 15 and AA Alkaline rechargeable batteries. For more information about available sensor configurations, please contact BW Technologies by Honeywell.

Exclusive features

Each GasAlertMicro 5 Series device features several exclusive features including a triple alarm system, raised glove-friendly buttons, a large easy to read display, stainless steel alligator clip, visual filter inspection, and automatic activation tests. When the unit is activated, the gas detector will automatically test for sensor integrity, circuitry, and battery. This continuous and reliable testing process ensures that the integrity and dependability of the device is never a concern.

BW Technologies by Honeywell also recognizes the unique needs of the various industries with environmental hazards. With each industry anticipating a separate set of possible dangers, the ability to customize safety devices is critical.

Users and worksite managers will be comforted to know their GasAlertMicro 5 series model is fully customizable. Customizable features include STEL intervals, TWA methods, sensor activation, alarms, display settings, record keeping, pumps, combustible gas measurements, start up calibration, backlights, activation modes, calibration levels, daily bump tests, and languages. To protect the integrity of the user settings and the safety of the gas monitoring device, the GasAlertMicro 5 device features a passcode function to prevent unauthorized manipulation of settings.

Accessories

The GasAlertMicro 5 Series is also compatible with BW's MicroDock II automatic test and calibration system. Users may purchase additional accessories to help fully tailor the gas detection unit to their needs. Accessories include an integral pump and battery charger, a confined space kit, a belt holster, and a collapsible sampling probe.

Part Number: M5IRXWBYRPDYN00

DOCK2-2-1J-00-G MicroDock II Automatic Test and Calibration Station with GasAlertMicro 5 Series Module (non-charging) with 2 Inlets by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK221J00G

Part Number: DXENBLNA

DX-MAXXT IntelliDoX Docking Station for BW MaxXT II by BW Technologies

IntelliDoX is a high tech way to combine your Fleet Manager II software with docking modules. It's as easy as connecting the gas monitor to the docking module. The IntelliDoX does all the testing for you and transfers the data from the unit to the IntelliDoX . With this form of automatic management, you increase productivity, efficiency, and reliability. In addition, the entire unit only weighs a little over four pounds.

Do your workers have to wait in line for bump tests at the start of each shift? This is no longer needed when you have the IntelliDoX system in place. It takes under 30 seconds to bump test 5 units at one time.

Do you have a great deal of monitors to keep up with? You can gang together as many as five IntelliDoX to manage a large fleet of gas detectors at the same time. Five units can bump test as many as 50 detectors in less than three minutes. And each module can work on its own.

The IntelliDoX can work by itself or can be networked with an Ethernet connection. Keeping track of records has never been easier. For example, you will enjoy quick and easy access to peak exposures, bump test results, and other important detection data.

Fast bump only takes 10 seconds. Standard bump is 40 seconds, and it can be placed in hibernation mode. The IntelliDoX comes with a complete 2 year warranty.

Features

• Peak reading display
• Time of peak reading
• High alarm set point
• Low alarm set point
• Alarm with gas readings
• Clock
• Bump test reminder
• Noncompliance indication
• Engage hibernation mode

Your IntelliDoX Comes with:

• Wall mount - also works as a stand and is retractable
• Ethernet port
• USB port
• Guide for quick reference
• Manual with CD
• ntelliDoX module - nest for portable gas detector has been installed at the factory.
• Software CD - Fleet Manager II

You will need to purchase an enabler kit for every five units banked together. The kit comes with power supply and hoses.

Part Number: DX-MAXXT

BWS1-XL-Y BW Solo Single-Gas Detector, (O2) Wireless - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-XL-Y

BWS1-HF-Y BW Solo Single-Gas Detector, (HF) Wireless - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms — choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-HF-Y

DOCK2-2-1C1N-00-G MicroDock II Automatic Test and Calibration Station with GasAlertQuattro Module (Charging) with Power Supply and 2 Inlets by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK221C1N00G

DOCK2-2-1C2G1M1P-00-G MicroDock II Automatic Test and Calibration Station with 1 fresh air and 1 gas inlet(s), 2 GasAlertClip Extreme (CO) module(s), 1 GasAlertMax XT II module(s) with charging, 1 GasAlertMicroClip XT module(s) with charging, with charging power supply by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK221C2G1M1P00G

Part Number: M5C01

Part Number: REG0.5

BWC3-M BW Clip 3 Year Single Gas Detector, Carbon Monoxide (CO), Low - 35 ppm / High - 200 ppm by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC3M

CPD-W5X1H1M1-Y-00 BW Flex Multi-Gas Detector, LEL IR/O2/H2S/CO/Yellow by BW Technologies

Whether you're protecting workers or first responders — in industries from steel and wastewater to paper and pulp — Honeywell BW™ Flex delivers the flexibility you need. Choose from more than 15 sensors to simultaneously detect up to 4 gas hazards.

REAL-TIME GAS READINGS AT A GLANCE

Honeywell BW™ Flex features a large high-resolution display with readings available in a wide range of languages. Vital safety information is conveyed clearly and effectively, enabling faster decision-making to protect lives in hazardous environments. Its innovative design, compact size and ease of use builds on the legacy of Honeywell BW™ gas detection products.

INTELLIGENT SENSORS FOR INCREASED SAFETY & UPTIME

Honeywell BW™ Flex incorporates i-Series intelligent sensors which monitor sensor status and provide advanced predictive calibration, maintenance and end-of-life information in real-time. These advanced alerts help reduce the likelihood of failure and increase awareness so preventive action can be taken to avoid safety incidents and unexpected downtime.

SIMPLIFIED GAS REPORTING AND ANALYSIS

Honeywell BW™ Flex can be paired with a smartphone easily via Bluetooth®. Download the Honeywell Safety Suite Device Configurator app for quick and precise device management, maintenance, reporting and analysis. Increase productivity by simplifying tasks like recording incidents and save time with one-click download for all instrument data.

FEATURES AND BENEFITS

• RELIABLE: Two months of battery runtime on a 4.5-hour charge with our new lowpowered IR LEL sensor. No daily charging, no unexpected downtime.
• COMPATIBLE: The Honeywell BW™ Flex Series is compatible with the IntelliDoX instrument management system and Honeywell Safety Suite using Bluetooth® for wireless configuration.
• ACCURATE: Low-power infrared LEL sensor is immune to silicone poisoning, which means accurate monitoring of combustibles.
• EASY TO MANAGE: The IntelliFlash™ green light indicates when the detector is in compliance and the amber light indicates the need for maintenance.
• RESPONSIVE: 1series sensors respond to dangerous gas levels in seconds, even in harsh temperatures.
• EASY TO USE: Small, lightweight and wearable. One-button operation.

Part Number: CPD-W5X1H1M1-Y-00

Part Number: MCXLMPCB1

BW Technologies GasAlertMax XT II Replacement Screw Kit (40 Screws)

The GasAlertMax XT II Replacement Screw Kit comes complete with 40 screws that are compatible with the BW Technologies GasAlertMax XT II portable gas detection system. The replacement screw kit includes enough screws for several replacement incidents. BW Technologies offers a full range of portable gas detection systems and manufactures a wide variety of accessories and replacement parts that extend the lifespan of your BW Technologies device. For more information about your device's compatible replacement parts and accessories, please consult your product's specification sheet.

Part Number: XTSCREWK1

BW Technologies Replacement Screw Kit (40 screws)

BW Technologies produces a range of replacement parts for many of their product lines. From covers and filters to screws and sensors BW Technologies replacement parts are convenient and cost-effective solutions for your BW Technologies devices. This kit of replacement screws is compatible with numerous BW Technologies gas detection devices and parts. The replacement screw kit is available with 40 screws.

Part Number: QTSCREWK1