IntelliDox, BW Technologies Monitors

Custom gas detection that performs well in all environments

The IntelliDoX smart docking system is designed to compliment your Fleet Manager II program. In fact, it enhances the fleet managing process, making it more reliable, productive, and efficient.

Take instrument management to the next level

IntelliDox lets you manage up to five gas detectors at once. Set up and installation are fast (less than 2 minutes). You'll save time and trouble with tasks like bump tests and calibrating. Because each module contains its own pump, screen, and operating system, you can multi-task with your fleet. In fact, it's possible to calibrate and bump test at the same time.

Flexibility combined with convenience

Keep your detectors working to your specs and needs. It's easy to change alarm settings whenever you want to. Many other parameters are simple and easy to set.

Fast and simple record-keeping and data backup

Do you need to transfer gas detection info to your data backup system or to a computer? You can use Ethernet or any USB device.

• Track worker compliance and change alarm settings
• Expand your fleet management to as many as 5 modules
• Simple and efficient setup - saves time and headaches
• Customized maintenance-free detection made easy

Compatible Detectors

BW Clip Series
ConneX1
GasAlertMicroClip Series

Bump Testing with Greater Efficiency

FastBump is one of the most efficient ways to bump test your detectors. It lets you enjoy all the standard bump test features and use test gas in the most efficient manner, optimizing the entire process while saving gas.

IntelliDoX Features:

• Simplified record keeping, calibration, configuration, bump testing. Update settings for these functions: Calibration Reminders & Bump test scheduling; Alarm settings; Preferences for time display; Can show gas reading with Alarm; Transfer event log data; Enable or disable non-compliance Indicator; Update detector firmware; Detect hibernation
• Industry's leading FastBump testing - no more bottlenecks and you avoid wasting expensive purge gas
• Dock as many as five modules together, each unit has LCD screen and keypad for independent operation
• You don't have to connect to the network for retrieving data or module configuration - just use the USB port
• Ethernet port allows for fast network connection
• Simple "no tools required" setup
• Bump tests and span calibration are easy

IntelliDoX Docking System Specs

Size (w x h x d): 5.4" x 14.2" x 4.3" (13.8 cm x 36.2 cm 10.9 cm) (one docking module)
Weight: 4.2 pounds (1.91 kg)
Power supply: 12 V / 8.33A ITE
Real-time clock: Time and date stamp
Communications method: Detector unit and module can communicate back and forth via infrared 2-way system

External interface

• 1 Ethernet port
• 1 USB port

Menu navigation

• Adjust display settings
• Review IntelliDoX module
• Password protect (if desired)
• Configuration for gas inlets
• Adjust time & date
• Configure UI display language: English, Portuguese, French, German, and Spanish

Automatic tests

• FastBump: 10 seconds
• Standard bump: 40 seconds

Data Storage: 2 GB (internal storage capacity)

Pump

• Each IntelliDoX module comes with its own pump
• Flow Rate = 350 ml/min

Instrument Management System: version 4.0 or newer Fleet Manager II

Ratings: Each IntelliDox Docking module complies with the FCC Part 15 and ICES 003Canadian EMI requirements. Operation is subject to these 2 conditions: (1) Must not cause harmful interference, and (2) This device must accept any interference including that which may cause undesired operation.

Warranty: Full 24 month (2-year warranty)

Options and Accessories

Fully portable IntelliDoX test station (in a Pelican case). Every kit contains -two docking modules, AC power adaptor, demand flow regulator, tubing, Ethernet cable and more.

Multi-Inlet Key

Lets you configure single IntelliDoX modules to connect multiple calibration gas

A list of all the accessories & kits is available.

DUE TO ONGOING PRODUCT IMPROVEMENT AND RESEARCH, SPECS CAN CHANGE WITHOUT NOTICE.

Part Number: DX-SOLO

High performance gas protection you can customize

IntelliDoX smart docking is the perfect complement to Fleet Manager II software. With two proven winners working together, you get the benefits of an "all-star"; team, to take care of your detector fleet managing needs.

Instrument Management Streamlined and Simplified

With IntelliDox, it takes very little time to set up and install as many as five modules. The system has the ability to handle detectors separately or together. For example, suppose you need to bump test 2 units and it's time to calibrate 3. Thanks to your new system, you can do both tasks at the same time. Every module comes with separate screen, pump, and OS.

Enhanced configuration options at your fingertips

Do you need to change the maximum gas level alarm setting? This is just one of many parameters you can change when needed. You'll keep all your gas detectors working to your specs as long as you own them.

Enhanced data transfers and networking

When you need to backup or transfer bump test data, or other info, it's as easy as plugging in a USB device or Ethernet cable.

• System lets you expand your fleet up to 5 modules
• Fast configuration - easy to track compliance and set alarm functions
• Perfect for turnarounds - simple and quick
• Simple and efficient way for customize maintenance-free units

Compatible Gas Detectors

ConneX1
BW Clip Series (includes BW Clip 4)
GasAlertMicroClip Series (includes X3 and XL)

A New Style of Bump Testing

When you use FastBump it takes very little time to apply test gas for the bump testing procedure. This method is not only fast, it's highly efficient and you'll save money on calibrating gas.

Important IntelliDoX Features:

• Compatible detector support for bump tests, record-keeping, configuration, and calibration. These settings are updatable: Gas Reading shown with alarm; Bump test scheduling and calibration reminders; Alarm settings configuration; Enable non-compliance warning; Choose how time is displayed; Event Logs data transfer; Hibernation Detection; Firmware updating
• Highly-efficient FastBump testing eliminates bottlenecks. You don't lose a lot of gas during the purge cycle.
• Network connection via Ethernet port
• Quick setup - you don't need special tools
• USB port - network access not required for data retrieval or module configuration
• Automated span calibration and bump testing
• Connect up to five modules together while keeping the option of independent operation (each unit has a display and keypad).

Specifications for Your IntelliDox Docking System

Size: single module is 5.4" width x 14.2" height x 4.3" depth. (13.8 x 36.2 x 10.9 cm)
Weight: 4.2 lb (1.91 kg)
Power supply: 12 V / 8.33A ITE supply
Real-time clock: Both time & date stamp
Communications method: Two-way infrared communication between docking module and detector

External interface

• USB - 1 port
• Ethernet - 1 port

Menu navigation

• Display settings adjustments
• Change date and time
• Gas inlet configuration options
• Review IntelliDoX module
• Password protection is optional
• UI display language: German, English French, Spanish, Portuguese

Automatic testing

• Standard bump - 40 seconds
• FastBump - 10 seconds

Pump

• Flow Rate: 350 ml/min
• Independent pump (each IntelliDoX docking module unit)

Data Storage (internal): 2 GB

Instrument Management System: Fleet Manager II, version 4.0 or newer

Warranty: Full two-year (24 month) warranty

Ratings: Device complies with the FCC Part 15 and ICES-003 Canadian EMI requirements. Operation is subject to these conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired operation.

Options & Accessories

Portable Kit is a fully portable IntelliDoX testing station in a Pelican case. Each kit comes with: two docking modules, tubing, ethernet cable, demand flow regulator, AC power adaptor, and more.

Multi-Inlet Key

User can configure each IntelliDoX module for more than one calibration gas connection

A complete list of kits & accessories is available.

DUE TO ONGOING RESEARCH AND DEVELOPMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

Part Number: DX-ULTRA

Part Number: REGDF1

Greater performance with more options for your gas detecting equipment fleet

With IntelliDox systems, you enjoy the benefits of smart docking technology with your Fleet Manager II software program. Compatible units can easily be managed and tracked automatically, to increase overall efficiency.

Instrument management made easy

It won't take long to install the new IntelliDox smart docking system. In fact, the entire installation process takes a couple of minutes or less. Because each module can be operated separately (with separate operating systems, pumps, and readout screens) you can multi-task. For example, it is possible to bump test 2 detectors while you perform calibration on 3 detectors.

Flexibility at your fingertips

Many of the IntelliDox parameters are simple to set, including the high and low alarm set points. This ensures that your gas detectors will never let you down during their entire service lives.

Network and track your data efficiently and conveniently

With both Ethernet and USB options, you can easily store bump testing and peak exposure data.

• Maintenance free detectors - new customizing options
• Track workers and control set points for alarms
• Add on to your docking system (up to 5 modules total)
• Fast and simple setup

Compatibility

BW Clip Series
GasAlertMicroClip Series
ConneX1

Unmatched Bump Testing Performance

Thanks to FastBump, it takes very little time to take care of all bump testing compliance issues. Efficient and economical system saves on test gas and optimizes the entire process

IntelliDoX Features:

• Bump tests, configuration, calibrating, and record-keeping support for compatible units. These settings are user updatable: Schedule Calibration Reminders and Bump Tests; Update Firmware; Gas level Reading Display During Alarm; Event Logs Transfer; Alarm Settings; Enable/Disable Non-compliance Indicator; Hibernation; Preferences for Time Display
• Simple Ethernet network connecting
• Gang as many as 5 modules - each unit has keypad and LCD screen for independent use
• Best FastBump test in the industry. Saves on gas and eliminates bottleneck issues
• No tools needed for setup
• No need for network access to configure or transfer data, thanks to USB port
• Span calibration and bump tests is automatic

IntelliDoX Specs

Size (One module): 5.4 in (13.8 cm) width - 14.2 in (36.2 cm) height - 4.3 in (10.9 cm) depth
Power supply: 12 volt / 8.33A ITE Power Supply
Weight: 4.2 pounds (1.91 kg)
Real-time clock: Date & time stamp
Communications method: Detector and docking module have 2-way (infrared) communication capabilities

External interface

• Ethernet port - 1
• USB port - 1

Menu navigation

• Adjust display settings
• Adjust date & time
• Configure gas inlets
• Review IntelliDoX module
• Password protection (optional)
• Configure UI display language: English, German, Portuguese, Spanish, French

Automatic tests

• Standard bump test: takes 10 seconds
• Fastbumpump: takes 40 seconds

Data Storage: 2 GB internal storage capacity

Pump

• Independent pump for each IntelliDoX module
• Flow Rate is 350 ml/min

Instrument Management System: Fleet Manager II (4.0 and higher)

Ratings: This device complies with the FCC Part 15 and ICES-003 Canadian EMI requirements. Operation is subject to these conditions: (1) Each device may not cause harmful interference, and (2) Each device must accept interference received (including any interference causing undesired operation).

Warranty: Full two years

Options and Accessories

Fully Portable Kit for IntelliDoX test station - comes with a Pelican case. Each kit contains: two docking modules, AC power adaptor, demand flow regulator, ethernet cable, tubing and more.

Multi-Inlet Key

You can configure a single IntelliDoX module to connect multiple calibration gases

A complete list of accessories and kits is available.

DUE TO PRODUCT IMPROVEMENT AND ONGOING RESEARCH, SPECIFICATIONS MAY CHANGE WITHOUT NOTICE.

Part Number: DX-MCLP

DX-MAXXT IntelliDoX Docking Station for BW MaxXT II by BW Technologies

IntelliDoX is a high tech way to combine your Fleet Manager II software with docking modules. It's as easy as connecting the gas monitor to the docking module. The IntelliDoX does all the testing for you and transfers the data from the unit to the IntelliDoX . With this form of automatic management, you increase productivity, efficiency, and reliability. In addition, the entire unit only weighs a little over four pounds.

Do your workers have to wait in line for bump tests at the start of each shift? This is no longer needed when you have the IntelliDoX system in place. It takes under 30 seconds to bump test 5 units at one time.

Do you have a great deal of monitors to keep up with? You can gang together as many as five IntelliDoX to manage a large fleet of gas detectors at the same time. Five units can bump test as many as 50 detectors in less than three minutes. And each module can work on its own.

The IntelliDoX can work by itself or can be networked with an Ethernet connection. Keeping track of records has never been easier. For example, you will enjoy quick and easy access to peak exposures, bump test results, and other important detection data.

Fast bump only takes 10 seconds. Standard bump is 40 seconds, and it can be placed in hibernation mode. The IntelliDoX comes with a complete 2 year warranty.

Features

• Peak reading display
• Time of peak reading
• High alarm set point
• Low alarm set point
• Alarm with gas readings
• Clock
• Bump test reminder
• Noncompliance indication
• Engage hibernation mode

Your IntelliDoX Comes with:

• Wall mount - also works as a stand and is retractable
• Ethernet port
• USB port
• Guide for quick reference
• Manual with CD
• ntelliDoX module - nest for portable gas detector has been installed at the factory.
• Software CD - Fleet Manager II

You will need to purchase an enabler kit for every five units banked together. The kit comes with power supply and hoses.

Part Number: DX-MAXXT

Part Number: DXARM

Part Number: DXENBLNA

A gas detector with unequalled performance and custom options

Do you need a more efficient way to manage your gas detector fleet? Now you can use the IntelliDox smart docking system with your Fleet Manager II program. This automates the process to make you more productive and efficient.

Easy management combined with greater productivity

Installing IntelliDoX is fast and easy. It only takes a few minutes to set up the 5-unit docking system. It's simple to multi-task because every module can operate independently with its own screen, pump, and operating system. It's possible to calibrate 4 units while bump testing another one, so you increase efficiency and save time.

Configuration flexibility for changing needs

With the new IntellDox smart docking system, you control many of the settings. This includes alarm for high and low parameters. Your detector equipment will always meet your specifications.

Simplify data management and networking

Data transfer is quick and simple. Store and transfer gas detection info like bump tests via Ethernet cable or USB.

• Take customizing to an entirely new level
• Modules can be expanded to five units
• Setup is uncomplicated and fast
• Many options, including worker compliance tracking

Compatible units

Outstanding Bump Test Performance

Bump testing has never been easier or more efficient. With the help of FastBump, you can quickly bump test your detectors while saving on bump test gas. It revolutionizes the bump testing process.

Features:

• Now you can calibrate, bump test, configure, and track data with compatible gas detectors. Users can update these settings: Display Gas Concentration Readings with Alarm; Change Alarm Settings; Time Display Preferences; Transfer Event Logs Data; Non-compliance Indicator Enabling; Hibernate unit; Schedule Reminders for Bump Tests and Calibration; Firmware update
• Modules have their own keypads and LCD screens - gangable up to 5 units
• Ethernet port for easy network connection
• Change module settings or transfer data via USB port - no network connection needed.
• Best in the industry FastBump Test - eliminates wasteful purge cycles and bottlenecks
• Easy setup - you don't need any tools
• No need for manual bump testing or calibration

Specs for IntelliDoX

Size (w x h x d): 5.4 x 14.2 x 4.3 in. (13.8 x 36.2 x 10.9 cm) (individual docking module)
Weight: 4.2 lb (1.91 kg)
Power supply: 12 V / 8.33A ITE
Real-time clock: Time and date stamp
Communications method: 2-way (infrared) communications between docking module and detector

External interface

• One USB port
• One Ethernet port

Menu navigation

• Display settings
• Time and date
• Gas inlets
• Review IntelliDoX module
• Password protect (when enabled)
• UI display language: English, French, German, Portuguese and Spanish options

Automatic testing

• FastBump - ten seconds
• Standard bump - forty seconds

Internal Data Storage: 2 GB

Pump

• Independent pump (each IntelliDoX module)
• Flow Rate: 350 ml/min

Instrument Management System: Fleet Manager II, v 4.0 or higher

Ratings

• Device complies with FCC Part 15 and ICES-003
• Canadian EMI requirements. Operation is subject to the following two conditions: (1) Device may not cause harmful interference, (2)  Must accept any interference received (includes interference which may cause undesired operation).

Warranty: Full two-year warranty

Accessories and Options

Portable Kit – IntelliDoX fully portable station with Pelican case. Kit contains: 2 docking modules, AC power supply, ethernet cable, tubing, demand flow regulator, and more.

Multi-Inlet Key

Configure one IntelliDoX module to connect multiple calibration gas

Complete list of kits and accessories is available.

DUE TO ONGOING RESEARCH & PRODUCT IMPROVEMENT, SPECS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Part Number: DX-CLIP

Part Number: DX-NEST-MAXXT

Part Number: REGDF3

Part Number: DXCOVER

Part Number: DXIF5

Part Number: DXNESTCLIP

Part Number: DXFILTERS

Part Number: DX-NEST-BWC4

Part Number: DX-SCREWS

Part Number: DXSTAND

Part Number: DXPSNA

Part Number: DX-NEST-MCLP

Part Number: DX-NEST-CP

DX-BWC4 IntelliDoX Docking Station for BW Clip4 by BW Technologies

IntelliDoX is a high tech way to combine your Fleet Manager II software with docking modules. It's as easy as connecting the gas monitor to the docking module. The IntelliDoX does all the testing for you and transfers the data from the unit to the IntelliDoX . With this form of automatic management, you increase productivity, efficiency, and reliability. In addition, the entire unit only weighs a little over four pounds.

Do your workers have to wait in line for bump tests at the start of each shift? This is no longer needed when you have the IntelliDoX system in place. It takes under 30 seconds to bump test 5 units at one time.

Do you have a great deal of monitors to keep up with? You can gang together as many as five IntelliDoX to manage a large fleet of gas detectors at the same time. Five units can bump test as many as 50 detectors in less than three minutes. And each module can work on its own.

The IntelliDoX can work by itself or can be networked with an Ethernet connection. Keeping track of records has never been easier. For example, you will enjoy quick and easy access to peak exposures, bump test results, and other important detection data.

Fast bump only takes 10 seconds. Standard bump is 40 seconds, and it can be placed in hibernation mode. The IntelliDoX comes with a complete 2 year warranty.

Features

• Peak reading display
• Time of peak reading
• High alarm set point
• Low alarm set point
• Alarm with gas readings
• Clock
• Bump test reminder
• Noncompliance indication
• Engage hibernation mode

Your IntelliDoX Comes with:

• Wall mount also works as a stand and is retractable
• Ethernet port
• USB port
• Guide for quick reference
• Manual with CD
• IntelliDoX module nest for portable gas detector has been installed at the factory.
• Software CD Fleet Manager II

You will need to purchase an enabler kit for every five units banked together. The kit comes with power supply and hoses.

Part Number: DX-BWC4

Part Number: DX-CASE

DX-CP IntelliDoX Docking Station for Icon and Flex Range by BW Technologies

IntelliDoX is a high tech way to combine your Fleet Manager II software with docking modules. It's as easy as connecting the gas monitor to the docking module. The IntelliDoX does all the testing for you and transfers the data from the unit to the IntelliDoX . With this form of automatic management, you increase productivity, efficiency, and reliability. In addition, the entire unit only weighs a little over four pounds.

Do your workers have to wait in line for bump tests at the start of each shift? This is no longer needed when you have the IntelliDoX system in place. It takes under 30 seconds to bump test 5 units at one time.

Do you have a great deal of monitors to keep up with? You can gang together as many as five IntelliDoX to manage a large fleet of gas detectors at the same time. Five units can bump test as many as 50 detectors in less than three minutes. And each module can work on its own.

The IntelliDoX can work by itself or can be networked with an Ethernet connection. Keeping track of records has never been easier. For example, you will enjoy quick and easy access to peak exposures, bump test results, and other important detection data.

Fast bump only takes 10 seconds. Standard bump is 40 seconds, and it can be placed in hibernation mode. The IntelliDoX comes with a complete 2 year warranty.

Features

• Peak reading display
• Time of peak reading
• High alarm set point
• Low alarm set point
• Alarm with gas readings
• Clock
• Bump test reminder
• Noncompliance indication
• Engage hibernation mode

Your IntelliDoX Comes with:

• Wall mount - also works as a stand and is retractable
• Ethernet port
• USB port
• Guide for quick reference
• Manual with CD
• ntelliDoX module - nest for portable gas detector has been installed at the factory.
• Software CD - Fleet Manager II

You will need to purchase an enabler kit for every five units banked together. The kit comes with power supply and hoses.

Part Number: DX-CP

Part Number: DXMIKEY