BW Clip4, BW Technologies Monitors

Part Number: CGQ344

Part Number: DXENBLNA

Part Number: REGDF1

Part Number: REG0.5

BW Clip4 4-Gas Detector (O2, LEL, H2S, CO), North American version - Black Housing by BW Technologies - BWC4-B-N

BW Clip 4: Detects Multiple Gases and It is Always "ON"

Imagine a multi-gas detector with no hassles. There is no battery replacement and no lost time charging it. You won't have to replace the gas sensor. It's a cost-effective, high quality gas detector that constantly works for you. All you have to do is clip it on. The BW Clip4 does all the rest and it's backed by a complete system of support technologies from Honeywell.

Continuous Protection for Two Full Years

IMPORTANT FEATURES

Wearing your BW Clip4

Using Your BW Clip4

BW Clip4 Compliance

Managing Your BW Clip4

BW Clip4 Reliability

Technical Specs

• WEIGHT 8.2 oz. / 233 g
• SIZE 4.7 x 2.7 x 1.3 in. / 12.0 x 6.8 x 3.2 cm
• OPERATING TEMP -4 to +131°F / -20 to +50°C
• HUMIDITY RANGE 5 - 95% RH (non-condensing) continuous
• INGRESS (intrusion) PROTECTION IP68
• ALARMS Visual, vibrating, 95 dB audible, visual, and vibrating. High, Low, STEL, TWA, and OL (over limit)
• SELF-TEST Activated detectors automatically test circuitry, sensors, and battery daily (24 hours)
• BATTERY LIFE Two full years of continuous operation
• EVENT LOG 70 of the most recent events

Users can set the following:

• Calibration span and intervals
• Set STEL from five to fifteen minutes (one minute increments)
• Bump testing intervals
• Combustible gases can be measured from zero to one hundred percent
• LEL or methane 0 to 5% v/v
• Set calibration due date to any day of the year (set to zero to turn off feature)
• Enable or disable sensors individually
• Set stealth mode
• Latching alarms

CERTIFICATIONS AND APPROVALS:

• Class I, Div 1, Group A, B, C, D
• Class I, Zone 0, Group IIC
• ATEX: II 1G Ex ia IIC T4 Ga
• IECEx: Ex ia IIC T4 Ga
• X: Conforms to all applicable European directives.
• For additional certifications, please consult Honeywell Analytics or review the manual.

WARRANTY Full two-year warranty (includes battery and sensor)

GAS SENSOR SPECIFICATIONS

INTELLIDOX TECHNOLOGY

*Combustible gas detection caution - the LED IR sensor does not detect gases like hydrogen or acetylene. Make sure the BW Clip4 will give you the combustible gas detection you need, before using.

Color Options

Part Number: CGQ584

BW Technologies Short Strap

The BW Technologies Short Strap works to attach your portable gas detection instrument to your body or clothing. The durable and tough double loop design allows users to clip the device onto a number of buttons and fasteners. Used another way, the device can be tied to the strap and worn on your arm. This cost effective security solution improves the portability of the detector and helps to ensure that the detector may be placed effectively near the user's breathing zones.

Part Number: GALY1

BW Technologies Chest Harness

BW Technologies has a wide range of accessories designed to improve the usability of their product lines. The BW Technologies Chest Harness does just that. Simply secure the harness to your body and insert the monitor into the harness. The monitor will fit securely in place on your chest and near your breathing zones. The chest harness is comfortable and tough enough to withstand modern work environments. With the chest harness, the device can continue to be hands free.

Part Number: GACH2

BW Technologies Neck Strap with Safety Release

The durable and tough BW Technologies Neck Strap comes with an added safety feature. When on site, the neck strap works to maintain the hands free nature of your portable device. Simply slip the device onto the strip and wear near your mouth or nose. In the event that the neck strap becomes caught in other equipment or is dangerously constricted, the safety release breaks away from the strap. The strap is adjustable and made with a durable industrial strength black cord.

Part Number: GANS1

Part Number: C2HOSE11

Part Number: DX-NEST-BWC4

BWC4-B-A BW Clip4 4-Gas Detector (O2, LEL, H2S, CO) - Black Housing, Australian version by BW Technologies

Honeywell BW™ Clip4 Multi-Gas Detector. It's ON.

The simplicity of "always on." The safety and quality of Honeywell.

When you've got your hands full in the field, you need no hassle gas detection you can count on: the Honeywell BW™ Clip4 four-gas detector. Wearable, easy multi-gas detection that's always on. No charging, no battery or sensor replacements, no hassle. Simpler, low cost of ownership guaranteed by the Honeywell commitment to quality, and backed by a full ecosystem of supporting technologies. When you clip on the Honeywell BW™ Clip4 you know - it's on.

Always On: 2-Year Continuous Runtime

Once activated, you can rest assured that the Honeywell BW™ Clip4 is always on. Two years of non-stop runtime with no charging or battery swap outs.

Easy to Wear

• Durable, ergonomic and wearable - doesn't weigh you down
• Compact profile - even working in tight spaces, you won't know you are wearing it

Easy to Use

• Simple one-button operation
• User-friendly tamper-proof operation with just one button
• Intuitive LCD icons
• Real-time gas concentrations shown on LCD

Easy Compliance

• Flashing red non-compliance indicators warn workers that the detector has not been bump tested according to schedule
• Daily full function self-test of sensors, battery status, circuit integrity, and audible/visual alarms

Easy to Manage

• Compatible with IntelliDoX docking system and instrument management system

Easy to Rely On

• Built-in concussion proof boot
• Tested to last in extreme environments

Part Number: BWC4-B-A

Part Number: BWC4-AG

BWC4-B-C BW Clip4 4-Gas Detector (O2, LEL, H2S, CO) - Black Housing, Chinese/New Zealand version by BW Technologies

Honeywell BW™ Clip4 Multi-Gas Detector. It's ON.

The simplicity of "always on." The safety and quality of Honeywell.

When you've got your hands full in the field, you need no hassle gas detection you can count on: the Honeywell BW™ Clip4 four-gas detector. Wearable, easy multi-gas detection that's always on. No charging, no battery or sensor replacements, no hassle. Simpler, low cost of ownership guaranteed by the Honeywell commitment to quality, and backed by a full ecosystem of supporting technologies. When you clip on the Honeywell BW™ Clip4 you know - it's on.

Always On: 2-Year Continuous Runtime

Once activated, you can rest assured that the Honeywell BW™ Clip4 is always on. Two years of non-stop runtime with no charging or battery swap outs.

Easy to Wear

• Durable, ergonomic and wearable - doesn't weigh you down
• Compact profile - even working in tight spaces, you won't know you are wearing it

Easy to Use

• Simple one-button operation
• User-friendly tamper-proof operation with just one button
• Intuitive LCD icons
• Real-time gas concentrations shown on LCD

Easy Compliance

• Flashing red non-compliance indicators warn workers that the detector has not been bump tested according to schedule
• Daily full function self-test of sensors, battery status, circuit integrity, and audible/visual alarms

Easy to Manage

• Compatible with IntelliDoX docking system and instrument management system

Easy to Rely On

• Built-in concussion proof boot
• Tested to last in extreme environments

Part Number: BWC4-B-C

Part Number: MKCG258

BW Clip4 4-Gas Detector (O2, LEL, H2S, CO), North American version - Yellow Housing by BW Technologies - BWC4-Y-N

BW Clip4 Multi-Gas Detector - It Never Sleeps!

Simplicity of "Always On" combined with Honeywell quality & safety

Sometimes you don't have time to stop and check your gas detector. Honeywell understands this problem and offers an effective solution. What if you only had to clip on your detector and forget about it? With the BW Clip4 it is just that simple. No more sensor or battery replacing. No more lost time charging. And your new BW Clip4 is backed up by a complete ecosystem of support from Honeywell.

No Hassles for Two Years

HERE'S WHAT YOU GET

User-friendly

• One-button operating
• Tamper-proof design
• LCD icons with intuitive design give you constant readings on gases

Wearer-friendly

• Designed for durability and ease of use
• Compact even in tight conditions, you won't know you it's on you

Management-friendly

• Data management made easy with IntelliDoX docking technology

Wear and Tear Friendly

• Concussion-proof boot
• Extreme environment tested

Compliance Friendly

• Red flashing lights inform you of non-compliance issues like bump testing due
• BW Clip4 automatically tests circuit integrity, alarms, sensors, and circuit integrity each day

BW Clip4 Technical Specifications

TECHNICAL SPECIFICATIONS

• OPERATING TEMPERATURE -4 to +131F (-20 to +50°Celsius)
• SIZE 4.7 x 2.7 x 1.3 inches (12.0 x 6.8 x 3.2 centimeters)
• WEIGHT 8.2 oz. / 233 g
• HUMIDITY 5 - 95% RH (non-condensing) continuous
• INTRUSION PROTECTION IP68 ALARMS Visual, audible, vibrating (95 dB); Low, High, TWA, STEL, OL (over limit)
• SELF-TEST Activated detectors do an internal diagnostic test every twenty-four hours (sensors, battery, and circuitry).
• BATTERY LIFE Typically two years of continuous operation
• EVENT LOGGING 70 of its most recent events

OPTIONS

• STEL period can be set for 5 to 15 min in 1 min intervals
• Bump test, span levels, and calibration interval
• Combustible gases measurement from 0-100% LEL (Lower Explosive Limit) Methane gas 0-5.0% v/v
• Set calibration due date (1 to 365 days, or zero for off)
• Individual sensors can be enabled and disabled
• Latching alarms
• Stealth mode

CERTIFICATIONS AND APPROVALS:

• Class I, Div 1, Group A, B, C, and D
• Class I, Zone 0, Group IIC
• ATEX: II 1G Ex ia IIC T4 Ga
• IECEx: Ex ia IIC T4 Ga
• X: Meets all applicable European directives.
• For additional details, please see the manual or Honeywell Analytics
• WARRANTY Full 2 years (sensors and battery included)

GAS SENSOR SPECIFICATIONS

SMART DOCKING DATA MANAGEMENT

SMART DOCKING DATA MANAGEMENT

BW Technologies Extension Strap

The BW Technologies Extension Strap easily clips to your gas detection equipment to give it greater mobility. The strap extends up to 4 feet. The durable plastic clip easily attaches to the gas detection instrument, and the tough nylon strap is outfitted with a wide comfort strip for easy carrying. The hardware on the strap is made of a tough plastic bend that can withstand workplace abuse and lifting.

Part Number: GAES1

BWC4-B-U BW Clip4 4-Gas Detector (O2, LEL, H2S, CO) - Black Housing, United Kingdom version by BW Technologies

Honeywell BW™ Clip4 Multi-Gas Detector. It's ON.

The simplicity of "always on." The safety and quality of Honeywell.

When you've got your hands full in the field, you need no hassle gas detection you can count on: the Honeywell BW™ Clip4 four-gas detector. Wearable, easy multi-gas detection that's always on. No charging, no battery or sensor replacements, no hassle. Simpler, low cost of ownership guaranteed by the Honeywell commitment to quality, and backed by a full ecosystem of supporting technologies. When you clip on the Honeywell BW™ Clip4 you know - it's on.

Always On: 2-Year Continuous Runtime

Once activated, you can rest assured that the Honeywell BW™ Clip4 is always on. Two years of non-stop runtime with no charging or battery swap outs.

Easy to Wear

• Durable, ergonomic and wearable - doesn't weigh you down
• Compact profile - even working in tight spaces, you won't know you are wearing it

Easy to Use

• Simple one-button operation
• User-friendly tamper-proof operation with just one button
• Intuitive LCD icons
• Real-time gas concentrations shown on LCD

Easy Compliance

• Flashing red non-compliance indicators warn workers that the detector has not been bump tested according to schedule
• Daily full function self-test of sensors, battery status, circuit integrity, and audible/visual alarms

Easy to Manage

• Compatible with IntelliDoX docking system and instrument management system

Easy to Rely On

• Built-in concussion proof boot
• Tested to last in extreme environments

Part Number: BWC4-B-U

Part Number: BWC4-SS

Part Number: BWC4-TC

Part Number: D4AS01

Part Number: BWC4-SCREW

BWC4-B-B BW Clip4 4-Gas Detector (O2, LEL, H2S, CO) - Black Housing, Brazilian version by BW Technologies

Honeywell BW™ Clip4 Multi-Gas Detector. It's ON.

The simplicity of "always on." The safety and quality of Honeywell.

When you've got your hands full in the field, you need no hassle gas detection you can count on: the Honeywell BW™ Clip4 four-gas detector. Wearable, easy multi-gas detection that's always on. No charging, no battery or sensor replacements, no hassle. Simpler, low cost of ownership guaranteed by the Honeywell commitment to quality, and backed by a full ecosystem of supporting technologies. When you clip on the Honeywell BW™ Clip4 you know - it's on.

Always On: 2-Year Continuous Runtime

Once activated, you can rest assured that the Honeywell BW™ Clip4 is always on. Two years of non-stop runtime with no charging or battery swap outs.

Easy to Wear

• Durable, ergonomic and wearable - doesn't weigh you down
• Compact profile - even working in tight spaces, you won't know you are wearing it

Easy to Use

• Simple one-button operation
• User-friendly tamper-proof operation with just one button
• Intuitive LCD icons
• Real-time gas concentrations shown on LCD

Easy Compliance

• Flashing red non-compliance indicators warn workers that the detector has not been bump tested according to schedule
• Daily full function self-test of sensors, battery status, circuit integrity, and audible/visual alarms

Easy to Manage

• Compatible with IntelliDoX docking system and instrument management system

Easy to Rely On

• Built-in concussion proof boot
• Tested to last in extreme environments

Part Number: BWC4-B-B

BWC4-B-E BW Clip4 4-Gas Detector (O2, LEL, H2S, CO) - Black Housing, European version by BW Technologies

Honeywell BW™ Clip4 Multi-Gas Detector. It's ON.

The simplicity of "always on." The safety and quality of Honeywell.

When you've got your hands full in the field, you need no hassle gas detection you can count on: the Honeywell BW™ Clip4 four-gas detector. Wearable, easy multi-gas detection that's always on. No charging, no battery or sensor replacements, no hassle. Simpler, low cost of ownership guaranteed by the Honeywell commitment to quality, and backed by a full ecosystem of supporting technologies. When you clip on the Honeywell BW™ Clip4 you know - it's on.

Always On: 2-Year Continuous Runtime

Once activated, you can rest assured that the Honeywell BW™ Clip4 is always on. Two years of non-stop runtime with no charging or battery swap outs.

Easy to Wear

• Durable, ergonomic and wearable - doesn't weigh you down
• Compact profile - even working in tight spaces, you won't know you are wearing it

Easy to Use

• Simple one-button operation
• User-friendly tamper-proof operation with just one button
• Intuitive LCD icons
• Real-time gas concentrations shown on LCD

Easy Compliance

• Flashing red non-compliance indicators warn workers that the detector has not been bump tested according to schedule
• Daily full function self-test of sensors, battery status, circuit integrity, and audible/visual alarms

Easy to Manage

• Compatible with IntelliDoX docking system and instrument management system

Easy to Rely On

• Built-in concussion proof boot
• Tested to last in extreme environments

Part Number: BWC4-B-E