All Products

QT-GP-03-R1 Power Ready Q-Test with Vehicle Power Supply (9-30Vdc), 0.5L/min. Fixed Flow Reactive Gas Regulator with on/off Valve by Crowcon

The Q-Test requires no power and is therefore ideally suited to remote users. Crews can now complete their functional check immediately prior to entry ensuring they are compliant. The power enabled option allows users to charge Gas-Pro on the move. Multiple mounting options and cylinder holder will enure that Gas-Pro is ready to protect workers when needed.

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

Part Number: M197150LM9

CS0500-B-FC Conductivity Standard, 500 μS/cm, 60mL by AquaPhoenix

• Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 60 mL

94051 Dew Heater Ring - 8" by Celestron

The Celestron Dew Heater Ring is the ideal dew prevention solution for your Celestron telescope. This must-have accessory will improve your observing or imaging nights year-round. The Dew Heater Ring permanently mounts to your 8" Celestron Schmidt-Cassegrain, EdgeHD, and RASA optical tube, replacing your retaining ring, so you'll never be caught without it. The installation process is quick and easy (follow the manual for instructions).

How it works

The Dew Heater Ring replaces the plastic retaining ring on your Schmidt corrector lens for efficient heating across the lens. The ring is constructed of lightweight, durable aluminum. Its rigid frame supports the cable circuity and the telescope's Schmidt corrector lens. Unlike other heating bands or strips that inefficiently heat the lens cell to warm the glass, the Celestron Dew Heater Ring heats the corrector glass directly, providing the most efficient transfer of heat to prevent dew formation.

Simply plug the ring into an external 12V DC power source for consistent, continuous heat that will prevent dew from forming even under heavy dew conditions. The Dew Heater Ring features two storage clips to keep the power and thermistor jacks secure when not in use while accommodating the telescope's dust cover.

The Dew Heater Ring also comes with a cable management clip that connects to the telescope's front cell. Corral the power and thermistor jack to prevent them from dangling and reduce unwanted pulls on the cable connection to the rings.

The Dew Heater Ring comes complete with:

• Dew Heater Ring
• Cable management clip
• Power jack extension cable
• Paper installation shield

Enhance your setup

To achieve the highest level of dew prevention while maximizing power efficiency, we strongly recommend pairing the Dew Heater Ring with a Smart DewHeater Controller (sold separately). The controller uses the ring's built-in thermistor and its internal environmental sensor to provide just the right amount of heat to the corrector to prevent dew based upon the ambient temperature, ambient humidity, and temperature of the Schmidt corrector, which can dramatically reduce the ring's power draw, greatly increasing battery life. The ring also includes an extension cable for connecting the ring directly to one of the controllers' heater output ports, or to a third-party controller's heater output port. (Note: the ring's integrated thermistor is only compatible with the Celestron Smart DewHeater Controllers).

We also recommend adding a dew shield to your setup. While not mandatory, a shield will cut down on the amount of power the Dew Heater Ring needs to keep the optics clear.

• Heater ring provides the most efficient heating directly to the corrector lens to prevent the formation of dew
• Permanently mounts to your existing telescope tube for a seamless look–plus, you'll never forget to bring it with you
• Integrated thermistor continuously monitors the temperature of the corrector lens when used with the Celestron Smart DewHeater Controllers.
• Rigid, lightweight, and durable aluminum construction
• Included storage clip and cable management clip keep your cables organized

For use in high dust environments such as steel plants.

65-2621RK M2, Hydrogen (H2) Specific 0 - 100% LEL Sensor/Transmitter with J-Box, 12 VDC Operation, UL Version by RKI Instruments

RKI Instruments uses the latest cutting edge technology when developing transmitters and sensors. Its dedication to workplace safety and reliable safety solutions is unparalleled. The M2 Stand Alone Transmitter utilizes state of the art sensor cell technology to integrate workplace safety with the industry's more advanced transmitter technologies.

M2 Stand Alone Transmitter

The M2 Stand Alone Transmitter is operational with or without a controller and is available in two forms: explosion proof and non-explosion proof. The unit has a backlit screen for a direct digital readout, and a user friendly setup with push buttons and easy to read LCD menus. The advanced technology transmitter can function as an independent standalone system or as part of an integrated detection and transmission system. Using state of the art technology, the transmitter uses a magnetic want technique for performing non-intrusive calibration. For optimal stability and accurate readings, the unit provides an automatic zero drift correction feature. This also reduces the need for adjustments due to sensor aging.

The M2 Stand Alone Transmitter is available for LEL, H2S, CO, PPM, HC, CO2, CI2, NH3, SO2, HCN, and more. The unit also features an infrared sensor for CO2 and combustible gases. With 2 fully programmable alarms and a fail relay, the visual color coded LED alarms are reliable and customizable to meet specific needs.

Advanced sensor technology

The state of the art sensors are long lasting with a lifespan typically over two years. Sensor construction is rated Class I, Division 1 groups B, C, and D for flammables, CO, H2S, O2, and CO2. The sensors are rated Class I, Division 2 for all other toxic gases. Depending on the gas, the sensors will operate through a catalytic, galvanic cell, electrochemical, or infrared design. The plug in nature of the sensors allows for a quick and tool free onsite replacement.

Specifications

Each transmitter features 2 to 3 years of life with normal service. The explosion proof LEL H2 specific transmitter has 3 to 5 years with normal service, and the explosion proof carbon dioxide, methane, and hydrocarbons feature over 5 years of life with normal service. The explosion proof transmitters are also water repellant. Each device is approximately 8.5 H x 5.2 W x 4.5 D and features an alphanumeric display with a backlight. The screen displays 8 characters per line with 2 lines for gas concentration readouts.

Optional Accessories

The M2 Stand Alone Transmitter has a variety of optional accessories available including calibration adaptors, flow through adaptors, remote horns and lights, calibration kits, battery backups, splash guards, air aspirator adaptors or panels, and dataloggers. The transmitters are directly compatible with Beacon 110, 200, 410, and 800 controllers.

*Please note we can only ship RKI products to customers within the United States

37955-14 Traceable® Vane Thermoanemometer/Hygrometer Pen with Calibration by Digi-Sense

The Digi-Sense family of air measuring instruments offers different levels of functionality, allowing you to select the one that best meets your application needs and budget. All models measure airflow and temperature.

The compact meters are designed for intuitive, instruction-free operation and have a Hold button to freeze display readings for easy recording of results. Min/Max readings are also captured. The tough ABS plastic housing and membrane keypad allow the anemometers to be used in harsh environments. A high contrast LCD display with 3/8" digits make it easy to read.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 37955-14 adds humidity/dew point measuring capability.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Easy to grip design
• Easy-to-use keypad

Includes

Four AAA batteries and NIST-traceable calibration certificate with data.

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

90446-34 Temperature Probe, Type J, 6" L, 1/8" Dia, Fiberglass, Stripped Leads, 1/8" Comp by Digi-Sense

Magnesium Oxide insulated thermocouples, commonly referred to as MgO thermocouples, are used in many process and laboratory applications. Many desirable characteristics make them an excellent choice for general and special purpose applications. They are available in all thermocouple element types, single or dual elements, a wide variety of sheath diameters / materials, rugged in nature, bendable, and have fairly high temperature ratings.

• 316 stainless steel sheath

ST9965-B Sodium Thiosulfate, 1.0N, 60 mL by AquaPhoenix

Industry: Aquaculture, Chemical, Clinical/Medical Lab, Drinking Water, Fertigation, Food & Beverage, Oil & Gas, Petroleum, Storm Water, Waste Water, Hospitality, Agriculture

RI-215A IR Diffusion Detector Head for CO2, 0 - 2000 PPM, (0 - 1 0,000 PPM Optional) by RKI Instruments

The RI-215 series of IR CO2 montitors are widely used in the measurement and control of CO2 levels in a variety of applications where CO2 monitoring or detection is required. A highly accurate, RKI non-dispersive infrared absorption sensor is used to provide direct measurements through diffusion or sample draw monitors, and activate alarms or control ventilation systems based on preset CO2 levels. Each model provides a digital readout in parts per million of CO2 providing precise measurement and direct visual indication of gas levels. A 4-20 mA output is provided to send a signal to a fire panel or other PLC system and a relay is available to trip an alarm or activate a ventilation system.

Three levels of measurement are provided: 0-2,000 ppm (ASHRAE 1969 IAQ max PEL), 0-5,000 ppm (leak detection of CO2 storage tanks) and 0-9,999 ppm. The RI-215A runs on 24 VAC or 24 VDC and the RI-215D with sample drawing pump runs on 115 VAC or 220 VAC. Each are designed for indoor use only and supplied in a NEMA 12 enclosure that is easily accessible for calibration, service, and continuous monitoring. RKI offers additional monitors with higher measurement levels in portable or fixed installation applications. Please contact an RKI authorized representative for more information on other CO2 monitors available

Features

• Easy to read LCD digital display
• Compact, lightweight and easy installation
• Highly reliable non-dispersive infrared detection method
• Recorder output signal
• Automatic control of ventilation systems
• Alarm contact output provided
• 4-20 mA output provided
• Diffusion or sample draw versions available

Applications

• Meets ASHRAE 1969 IAQ Standard of 2,000 ppm max PEL
• Detection of CO2 for NFPA 12 Regulations-CO2 storage tank leaks
• Green houses, wineries, breweries, food processing, indoor air quality, and other industry applications

*Please note we can only ship RKI products to customers within the United States

Part Number: 66L-462

GD-K71D-HCL-E GD-K71D Smart Transmitter, Hydrogen Chloride (HCl), 0 - 15 ppm, with ES-23E Sensor by RKI Instruments

The GD-K71D is a complete sample drawing gas monitor, including digital readout and alarm relays. A new gas sensor technology using an intelligent sensor for remote location calibration and setup is used. The new GD-K71D sensors are designed to provide a longer time period between calibrations. Calibration intervals have been extended to12 months of on-line service which equates to reduced maintenance cost. In addition, the sensors can be calibrated away from the gas detector installation, for example in a service area or off site. This eliminates the inconvenience of having calibration gases in the fab or monitoring location. GD-K71D easily connects to an existing PLC system and is ideal for applications needing a local readout or where a relay control is needed. The automatic zero correction software provides excellent long term stability and minimizes false alarms due to zero drift.

Features:

• LED digital display
• Sensor information and calibration is stored within sensor memory
• Several data transmission options available
• Zero suppression and correction
• Housing design for narrow wall mounting locations
• Self-diagnostic functions by microprocessor
• Electrochemical sensors for most semiconductor gases
• Built-in sampling pump
• Easy replacement of pump and sensor
• Two alarm levels with relays, plus trouble alarm
• 24VDC operation
• Optional NEMA 4X housing available

Applications:

• Semiconductor
• Chemical Processing
• Laboratory
• Manufacturing
• HVAC

*Please note we can only ship RKI products to customers within the United States

Xgard Gas Detectors

Crowcon is a global leader in designing and manufacturing gas detection technology and equipment. The company has been in operation for over 40 years and is consistently building upon its products. By integrating modern technology with the demands of the modern workplace, Crowcon has developed a line of gas detection devices and monitors that lead the competition. The Xgard range of gas detectors is a product of Crowcon s successful integration and technological advancements. With a wide range of sensor types and available accessories, the Xgard series is suitable for all worksites and is customizable enough to fit any needs.

Tough and reliable

The Xgard series of fixed point gas detectors is incredibly durable and reliable. The casings and materials, including weatherproof caps, are designed to protect the equipment from the harshest environments. The detectors are made from a variety of materials depending on the model: glass reinforced nylon, aluminum with polyester coating, and 316 stainless steel.

Variety of sensors

The fixed point gas detector offers a wide range of sensors for to suite almost all applications. The Xgard range of gas detectors is available in three models to meet varying worksite needs: flameproof, intrinsically safe, and safe area formats. Additionally, Xgard offers different types of fixed point gas detectors within these three models:

• Xgard Type 1- Intrinsically safe toxic and oxygen gas detectors
• Xgard Type 2- Flameproof toxic and oxygen gas detectors
• Xgard Type 3- Flameproof flammable gas detector
• Xgard Type 4- Flameproof high temperature flammable gas detector
• Xgard Type 5- Flameproof flammable gas detector with 4-20mA output
• Xgard Type 6- Flameproof thermal conductivity type gas detector
• Xsafe- Safe area flammable gas detector

Cost efficient and highly effective

With quick and easy installation and maintenance, the Xgard series is able to keep costs at a minimum. The replacement sensors, for example, are simple to replace by merely plugging them in. The replacement parts are also readily available and compatible with all Xgard models, thereby reducing the amount of required spare parts that are stored in the facility. Additionally, the sensors have two times the typical life spans of similar sensors in the industry. With a 2 year life span, worksites can expect to cut their sensor replacement costs in half. For worksites that require slightly more customization, Crowcon offers compatible accessories for the Xgard series such as sampling applications, remote gassing applications, spray deflectors, sun shields, weatherproof caps, collector cones, flow adapter, and accessories adapter.

Xgard also has flexible installation options. The unit is designed for either wall or ceiling mounts, and users will not need to purchase additional equipment for mounting. For more complex installation needs, users can purchase accessories.

Specifications

Each model is approximately the same size with dimensions of 6.1 x 6.5 x 4.3 inches and weighing approximately 1 or 2 pounds. The battery type, electrical output, and power requirements vary based on the sensor type. For a complete listing of gas sensors, types, and individual specifications, please see the product specifications listing.

Part Number: C2HOSE2