All Products

2811-736-002 EC 28 Gas Transmitter with Sensor, Hydrogen Chloride (HCl), Display by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG s proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

10157965 Altair 2X Single Gas Detector, CO (30,60), Gray by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

SCT-108.005.13 SCT-EC-MAXI EC (Electrical Conductivity) Maxi Controller by ScichemTech

Includes:

• Conductivity sensor
• Fixation clamps
• Calibration solution
• Instruction manual

Features:

• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS are designed with creativeness to get the elegance and produced with proper quality, and meets the specifications for the Water related applications with high level performance.
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS are supplied with the suitable electrode with SCT standard 10 meters cable. (New series) 3 ranges of EC can be adjusted in a single controller and the ranges can be switched easily.
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS are an industrial instrument used for online analysis and monitoring.
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS are made in a attractive pleasant colour with a Large and Clear blue white LCD Display
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS are Microprocessor based controllers, which gives stable and accurate readings.
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS uses Low power consumption and produces less internal heat.
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS has an isolated 4-20 mA current output.
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS proved to work continuously in any harsh environmental conditions for the in line measurement and control of accurate EC value and it give the direct measurement and readings.

9531000 Pocket Pro pH Tester by AquaPhoenix

Hach Pocket Pro and Pro+ are engineered to deliver accurate results. Backed up with built in performance diagnostics, you never have to guess when to clean or calibrate the sensor. You also get replaceable batteries for convenient field use, and a large, easy-to-read LCD screen.

Includes: tester, 4 AAA batteries, lanyard, calibration solution and quick start guide.

Range: 0.0 to 14.0 pH

• Confidence in Results
• Save Time and Money
• Ease of Use

WD-35614-79 pH 300 & pH 310 Meter Calibration Kit by Oakton

Calibration kit includes pH buffer pouches (five each of 4.01, 7.00, 10.00, and rinse water), squeeze bottle, and hard carrying case. (Meter not included)

306XC Calibratable Low Cost Pocket Digital Thermometer (Centigrade Version of the 306) with A306 by Test Products International

TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All "C" Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F!

Features

• Field calibrateable to ±2°F
• Easy-to-read LCD
• Data Hold for hard to reach areas
• Penetration tip
• Auto off
• 3-year limited warranty

Application

• Ambient air
• Calibrate thermostats
• Vents
• Compressor heads
• Registers
• Grill and surface temperatures
• Serving temperatures

726-110-05-P2 Eagle 2 Portable Monitor for CH4 100% LEL/100% Volume (IR) Autoranging/O2/CO/H2S/CO2 60% Volume (IR)/VOC?s 0 - 2,000 ppm, (PID) by RKI Instruments

Continuing in its legacy of durable and reliable gas detection and monitoring systems, RKI Instruments is proud to offer a new product in its popular Eagle portable gas detector series. The Eagle 2 can monitor up to 6 different gases and is equipped with several exclusive features that can only be found with the Eagle series. In addition, its large glove friendly push buttons and LCD screen ensure an ease of use when onsite. Rated intrinsically safe, the Eagle 2 is equipped with state of the art technologies that are not available with other competitive gas detectors and monitors.

Specialty Sensors

The Eagle 2 has a variety of available specialty sensors. Workers can use a photoionization detector for low or high range VOC detection and Fence Electrode Technology for humidity and contamination resistance. An infrared sensor is available for Co2, % LEL CH4, % Volume CH4, % LEL HC, and % Volume HC. Thermal conductivity sensors are available for % Volume H2 and % Volume CH4. The unit is also compatible with the smart plug and play toxic sensors for the detection of NH3, AsH3, CI2, HCN, PH3, and SO2. With the wide variety of sensors and gas detection available, the Eagle 2 can be customized to meet almost all worksite gas detection needs.

Exclusive Features

The monitor has a long internal pump that can draw samples for up to 125 feet. The pump features a low flow auto shut off and alarm. This allows operators to respond swiftly from a safe distance. The unit is multilingual with 5 different language preferences, and features an alkaline battery life of 18 hours or a NiMH life of 20 hours. To protect the integrity of the device and the configurations, the unit can be password protected. The Eagle 2 also has standard data logging capabilities for easy research, evaluation, and site monitoring. To reduce calibration costs and time, the unit features an automatic calibration option and a single gas calibration option.

The Eagle 2 is heavily protected from environmental conditions by a weather proof, chemical resistant RFI/EMI coated high impact polycarbonate/PBT blend enclosure. The enclosure also renders the unit water and dust resistant. Because of the enclosure, the Eagle 2 can function in 2 inches of water without leakage.

Eagle 2 Specifications

The portable and durable unit is lightweight at less than 4 pounds. Its dimensions are suitable for convenient carrying (9.5?L x 5.25?W x 5.875?H), and it features a conveniently placed durable top handle. The large easy to read display has a polyurethane overlay backlights on demand and when the alarm is activated. The 2 alarm channels are fully adjustable for the user and can be password protected. With a 95 dB buzzer and 4 high intensity LEDs, the alarm is sure not to be missed. The Eagle 2 is standard with a 2 year warranty for material and workmanship and a 1 year warranty for PID sensor.

*Please note we can only ship RKI products to customers within the United States

Part Number: 103L-303

Part Number: P197150LM27

C-3501 Copper Comparator (round) by AquaPhoenix

C-3501 Low Range Copper Comparator is a component of K-3510 Copper (soluble) CHEMets Visual Test Kit and is designed to be compared against the color formed in R-3510 Copper CHEMets Refill. The comparator's range is applicable for many drinking water, water treatment, and aquaculture applications. Color standards are yellow in color and cover a range of 0-1.0 ppm copper (Cu).

Part Number: 221L-338

Part Number: 10L-457S

98768-34 8598 Replacement Cone Tip for 98767-07 by Digi-Sense

Choose from a wide range of accessories for your Digi-Sense tachometer including replacement wheels, tips, and tape.

18763 PowerTank Lithium LT by Celestron

Power your telescope anywhere with the PowerTank Lithium LT, our smallest and lightest lithium-ion power pack. This handy device is a must-have for your telescope and accessories, camping gear, emergency kit, and more.

• Our most compact, lightweight, and portable lithium power pack
• The built-in 12 volt regulating circuit Provides your telescope with up to 8 hours of consistent power at the proper voltage for optimum telescope performance
• Comes with a rapid charge USB port for fast-charging your electronic devices in the field
• Meets current FAA carry-on baggage regulations

Stable Power Designed for Telescopes

The PowerTank Lithium LT is built with Lithium Nickel Manganese Cobalt Oxide [LiNiMnCoO2] or NMC technology, which delivers a steady charge over long periods and requires less maintenance than a traditional sealed lead-acid battery.

Unlike other lithium-ion power packs in this price range, the PowerTank Lithium LT was designed for astronomers by astronomers-specifically for the unique needs of computerized telescopes.

Telescope electronics are very sensitive to voltage. Powering a telescope with lower-than-optimal voltage can cause the motors to strain with heavier loads and can even cause the electronics to glitch. The PowerTank Lithium LT uses a built-in voltage regulator to ensure that it delivers at least 11.8 volts for most of the life of the battery, until the battery is depleted and shuts off.

You may see competitor batteries claiming that they hold enough watt-hours of electricity to power your telescope for hours. The technology in these batteries was originally developed to power much lower-voltage electronics, such as home CPAP machines. Although the voltage actually being delivered starts off at 12V, it diminishes rapidly, impacting your telescope's performance and becoming functionally useless within about 2-3 hours.

Celestron's telescope engineers worked hand-in-hand with battery suppliers on PowerTank Lithium LT to ensure that it does not experience this dropoff in performance. The built-in voltage regulator ensures a stable 12V output, regardless of the amount of charge left in the battery. This keeps your telescope's electronics safe and performing their best, so you can focus on astronomy.

The NMC chemistry used by the PowerTank Lithium LT offers far more advantages than the commonly used Lithium Cobalt Oxide batteries found on the market today. Besides having a longer shelf life and three times the number of charge cycles than LiCoO2 chemistry, our NMC battery offers overcharge and over-discharge protection and can withstand temperatures 100o F (60o C) higher than LiCoO2 batteries making the NMC less likely to experience thermal runaway.

Compared to a lead-acid battery, the PowerTank Lithium LT is smaller, lighter, more efficient, and better for the environment. It offers better performance, a longer lifespan, and safer operation than other low-cost lithium-ion battery chemistries. It also offers automatic shut-off, reverse polarity protection, charging/discharging protection, overcurrent protection, and short circuit protection.

Use in the Field

The power pack's extremely portable form factor means it can go anywhere from a remote dark sky location for astroimaging to a weekend of camping. When it's powering your telescope, use the included 2" straps to secure the unit to your tripod leg where it is out of the way. Besides the power cable to charge your telescope, no other cables are needed.

If you need to power your telescope and charge electronic devices simultaneously, the PowerTank Lithium LT features two output ports: 1 12V DC port for the telescope and 1 fast-charging 2.1A USB charging port for smartphones and tablets. This USB port can also support any accessories that require 5V USB power.

Travel with PowerTank

The PowerTank Lithium LT can travel with you on your next vacation. At 73.3 watt-hours, it meets current FAA regulations (160 Wh) for transportation in your carry-on baggage. Please check in advance with your airline to verify they do not have stricter policies. Do not place PowerTank Lithium LT in your checked baggage.

PowerTank Lithium LT Compatibility List

Will power any computerized mount

42503LR Gasurveyor 3 - 500R 2 Button Portable Gas Detector - LEL, VOL (No Purge Mode) - Rechargeable by GMI

The GMI Gasurveyor 500 series is GMI's most technologically advanced range of gas detectors to date. GMI has developed this new range of standard instruments to cover the majority of your gas detection requirements.

Features

• Rechargeable or alkaline battery options
• Approved to European and North American safety standards
• Extremely robust anti-static case
• Simple to use, 2-button operation
• Built-in sampling pump as standard
• Large LCD with automatic backlighting in low level light conditions
• Audible/visual alarms for all gas ranges
• Fault alarms for low flow, low battery, etc.
• Compatible with the GMI range of Auto Calibration Systems

Includes

• G500 carrying case
• Harness
• Hex driver
• 1.5Mt clear sample line
• User manual
• Probe handle
• 35 cm probe (solid end)
• Sample line adaptor
• Dry cell batteries (not USA) or NiCad pack and cotton filters (20).