All Products

Part Number: H197830LM1

pH51 pH Waterproof Tester, Unit comes with 2 Points Manual Calibration by Milwaukee

The Milwaukee Waterproof pH51 Tester is one of our most accurate low cost, rugged and reliable pH testers in the market featuring the ability to easily replace the probe providing for years of carefree use. It's simple 2 point manual calibration is simple-to-use. Ideal for use in aquariums, hydroponics, horticulture, pools and many other applications.

The Milwaukee pH51 pH tester offers:

ACCURACY

The Waterproof pH51 tester is accurate to ±0.1 pH and is easy to read.

With easy 2 point manual calibration, this pH tester is quickly calibrated to an accuracy of much more expensive meters. Simple design and rugged, it brings great value for any application. Why guess at your readings using litmus paper when you can have guaranteed accurate, digital LCD results.

LONG LIFE

The tester comes with a replaceable pH probe with a double junction probe designed for longer life.

FAST RESPONSE

The probe is double junction allowing quick, accurate pH readings and respose times.

WATERPROOF CONSTRUCTION

No more worries about dropping your tester while measuring. The pH51 is waterproof to IP65.

LIGHT WEIGHT

At just 3.5 ounces, the pH51 is easy to handle at up to half the weight of other testers.

EASE-OF-USE

A large LCD screen makes reading results easy while calibrating or reading your measurement. This takes the takes the guess work out of litmus paper.

DESIGN FEATURES

• Fast easy to read results with large digital LCD readout.
• Extreme pH accuracy to ±0.1 pH with a pH range (0.0 pH to 14.0 pH).
• Lightweight and portable.
• Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading.
• Simple manual one or two-point calibration.
• Gel-filled, double junction pH electrode for low maintenance and high performance.
• Fully waterproof to IP65.
• Over 1500 hours of continuous battery life (batteries included).
• Replaceable pH electrode.

CARE AND USE

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!

Here are our top four tips.
1. Always store with the cap full of buffer or storage solution MA9015 not water.
2. Clean your Tester regularly by soaking in cleaning solution MA9016.
3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.
4. Gently stir the Tester in the sample for a faster result.

GS-AV-A Gasman Intrinsically Safe Personal Single Gas Monitor, Rechargeable Battery, 0-10ppm Hydrogen Fluoride by Crowcon

For over 40 years, Crowcon Detection Instruments has produced state of the art gas detection devices for personal and industrial use. Building upon their reputation for reliable and innovative gas monitoring products, Crowcon introduces the Gasman personal gas monitor. Its lightweight and compact design is convenient for jobsites where workers need not be weighed down by excessive bulk and equipment. The unit conveniently clips to a pocket or helmet and operates continuously.

The Gasman personal gas monitor has numerous convenient features such as:

• One button technology
• Backlit LCD display
• Durable polycarbonate casing
• Quick response triple alert system
• Compact and lightweight design

Easy to Use

The Gasman s true one button technology is an ideal and simple design. The large glove friendly button is mounted on the front of the unit for easy access and controls all of the unit s programmable features. Also on the front, the Gasman s easy to read backlit LCD screen indicates gas readings and the battery status. The simple screen provides a clear indication of the unit s operation status. It will also alert the user 30 days in advance of when a calibration test is due. With a simple and intuitive design, Crowcon has produced a gas detector that reduces the complexities of workplace safety, and ensures workers in a straightforward manner that their equipment is on and operational.

Triple Alarm System

This portable single gas detection system features a triple alarm system that is sure to alert the user and anyone in the vicinity. The visible alarm utilizes a dual red and blue flashing LED light, and the unit houses an internal vibrating alert system. These two indicators allow for visual recognition in loud environments and working conditions. The alarm system also features a programmable audible alarm at 95 decibels. The unit is capable of a variety of alarm tones, and users can select which tone may be best for the individual workplace setting. The triple alarm system with multiple sensory indicators is sure to be noticed in almost any work environment.

Specifications

The Gasman single gas monitor is lightweight and compact, weighing less than 135 grams and with dimensions of 90 x 48 x 24 mm. The unit is available with a wide variety of gas sensors which feature various detection and alarm levels. The unit also features a quick response time of 20 seconds for flammable and toxic gases or 10 seconds for oxygen. Its datalogging feature has approximately 900 hours of storage and all events are time stamped. The battery life for this unit is incredible with 12 hours of runtime on a Rechargeable battery battery or up to 2 years on a non-Rechargeable battery.

Part Number: M5BC1

WD-35812-48 Water hardness Ca+2,Mg+2 Double-junction Ion-Selective Electrode (ISE) by Oakton

Double junction makes these electrodes ideal even for rugged applications

Use these economical Ion Selective Electrodes (ISEs) with the ION 510 meter, pH 2500 Ion benchtop meter, or the Ion Acorn meters. They also are suitable for use with any other ion meter, or with any meter with 0.1 mV resolution. All ISEs feature a BNC connector and 3-ft cable.

ISE solution kits contain the solutions and accessories needed for calibration, sample preparation and measurement of ion concentration and activity. All solutions are supplied with MSDS (Material Safety Data Sheet) and have a value of 1000 ppm.

• Each features a BNC connector and 3-ft cable

WD-35421-02 Ion 2700 Benchtop Meter, Software, and Probe Stand by Oakton

GLP-compliant meter with pH, ORP, or ion concentration capability is perfect for water, wastewater, or food applications.

The Ion 2700 meter offers a new compact design that is over 40% smaller than other benchtop meters. The large display is easy to read even at a distance and features stability indication. All measurements include temperature display. The meter includes auto-buffer recognition for both USA and NIST pH buffer sets, automatic or manual temperature compensation, temperature in °F or °C, and display Hold. A calibration due alarm function means no more out-dated calibrations. The water-resistant membrane keypad offers password protection for both set-up and calibration.

Multiple pH slopes and offset display enables quick, easy electrode diagnosis. The electrode holder can be mounted on either side of the meter. The convenient pull-out, quick-reference card keeps keypad functions at your fingertips.

• Large display with bright backlight
• Dynamic reading stability indication displays when your measurement is stable
• Up to 500-point memory with date-time stamp for GLP
• Password protection for both setup and calibration for security
• Calibration-due alarm let you know when to recalibrate
• Audible alarms alert you when reading fall out of range
• Output data to either printer or PC

Xgard Gas Detectors

Crowcon is a global leader in designing and manufacturing gas detection technology and equipment. The company has been in operation for over 40 years and is consistently building upon its products. By integrating modern technology with the demands of the modern workplace, Crowcon has developed a line of gas detection devices and monitors that lead the competition. The Xgard range of gas detectors is a product of Crowcon s successful integration and technological advancements. With a wide range of sensor types and available accessories, the Xgard series is suitable for all worksites and is customizable enough to fit any needs.

Tough and reliable

The Xgard series of fixed point gas detectors is incredibly durable and reliable. The casings and materials, including weatherproof caps, are designed to protect the equipment from the harshest environments. The detectors are made from a variety of materials depending on the model: glass reinforced nylon, aluminum with polyester coating, and 316 stainless steel.

Variety of sensors

The fixed point gas detector offers a wide range of sensors for to suite almost all applications. The Xgard range of gas detectors is available in three models to meet varying worksite needs: flameproof, intrinsically safe, and safe area formats. Additionally, Xgard offers different types of fixed point gas detectors within these three models:

• Xgard Type 1- Intrinsically safe toxic and oxygen gas detectors
• Xgard Type 2- Flameproof toxic and oxygen gas detectors
• Xgard Type 3- Flameproof flammable gas detector
• Xgard Type 4- Flameproof high temperature flammable gas detector
• Xgard Type 5- Flameproof flammable gas detector with 4-20mA output
• Xgard Type 6- Flameproof thermal conductivity type gas detector
• Xsafe- Safe area flammable gas detector

Cost efficient and highly effective

With quick and easy installation and maintenance, the Xgard series is able to keep costs at a minimum. The replacement sensors, for example, are simple to replace by merely plugging them in. The replacement parts are also readily available and compatible with all Xgard models, thereby reducing the amount of required spare parts that are stored in the facility. Additionally, the sensors have two times the typical life spans of similar sensors in the industry. With a 2 year life span, worksites can expect to cut their sensor replacement costs in half. For worksites that require slightly more customization, Crowcon offers compatible accessories for the Xgard series such as sampling applications, remote gassing applications, spray deflectors, sun shields, weatherproof caps, collector cones, flow adapter, and accessories adapter.

Xgard also has flexible installation options. The unit is designed for either wall or ceiling mounts, and users will not need to purchase additional equipment for mounting. For more complex installation needs, users can purchase accessories.

Specifications

Each model is approximately the same size with dimensions of 6.1 x 6.5 x 4.3 inches and weighing approximately 1 or 2 pounds. The battery type, electrical output, and power requirements vary based on the sensor type. For a complete listing of gas sensors, types, and individual specifications, please see the product specifications listing.

Part Number: M5C01

CH0200-V Chlorine, Free, 0-200 ppm by AquaPhoenix

• Vial can be private labeled with your company logo, 200 strips.

Part Number: H1016800PM2

Part Number: H1016500PM1

6110-1109 MGD-100 Gas Detection System, R22: 0 - 1,000 ppm, 1 Sensor, 2 Alarms, Standard Housing, 110 VAC by Bacharach

Bacharach's MGD-100 Series is a robust and scalable gas detection system used for reliable real-time monitoring of refrigerant, combustible, and toxic gases. It's a stand-alone system that alarms when pre-set thresholds are exceeded. The MGD-100's alarms are monitored by a centralized controller, which can alert personnel of potential hazardous conditions via an onboard buzzer and LED alarm indicators.

MGD-100 Systems can be configured from single-sensor, one-alarm level systems to larger scale systems consisting of 6 sensors with 2 alarm levels. This flexibility allows the platform to be used for both small and large systems.

Ideal for Chiller Rooms, Supermarkets, Brewing and Bottling Facilities, Industrial Refrigeration, Arenas, Food Storage and Processing Facilities.

Features & Benefits:

• Stand-alone, out-of-the-box solution with quick and easy installation - the most cost-effective system available.
• Fast-response sensors detect leaks quickly, which minimize refrigerant gas usage and environmental impact.
• Infrared (NDIR) CO2 detection
• Long-life semiconductor sensors for detection of all refrigerants, ammonia, halocarbons, combustibles & VOCs
• Robust design allows units to be placed directly in areas where detection is needed.
• Available in a variety of housings, including IP66 and duct mount.
• Select from 1, 2, 4 or 6 remote sensors and 1 or 2 pre-set alarm levels, which can be connected to BMS systems.

HU-X1W1H1M1B1-B-N BW™ Ultra 5-Gas Detector (O2, LEL, H2S, CO, CO2 IR) with Pump, Black Housing by BW Technologies

At Honeywell, we always put your safety where it should be first. With Honeywell BW™ Ultra, our new portable five-gas detector, you will be able to do the same for your workers. Designed specifically for sampling and monitoring confined spaces, before and after entry, Honeywell BW™ Ultra has enhanced sensor technology, visibility on gas readings, comfort, and connectivity. This makes it the most reliable and user-friendly way to prevent a safety incident.

Extra Gas Detection. Extraordinary.
The Honeywell BW™ Ultra complies with all safety regulations in place by detecting your required gases. Furthermore, it goes the extra mile by offering you the option to choose a fifth sensor from a list of gases for added protection at work.

The Honeywell BW™ Ultra is the first gas detector on the market to feature the 1?Series sensor, with fast response, reliable performance and long life, even in extreme working conditions. That means high accuracy and lower costs.

Features & Benefits

Ultra Easy

• Tamper-proof operation with one button operation
• Intuitive LCD icons for quick decision making
• Easy service and maintenance

Ultra Visibility

• Intuitive large dot matrix display giving clear readings
• Smart Gas layout for clear sensor reading
• Hole Watch Mode for quick decision making
• IntelliFlash™ and also Reverse IntelliFlash™ for clear compliance

Ultra Rugged

• Honeycomb-designed housing for extra ruggedness
• Protection designed in the right place
• Scratch-resistant display protector

Ultra Connected

• Honeywell Connected Worker compatible
• Honeywell TouchConnect™ Technology for activating a feature
• Honeywell SafetySuite for unit configuration and reporting

Ultra Comfortable

• Ergonomically designed for easy use
• Light yet rugged design
• Fits in the hand for easy sampling

Ultra Quick

• Quick responding sensor technology
• Quick decision making because large display
• Quick bump & calibration with IntelliDoX system

Part Number: HU-X1W1H1M1B1-B-N

Part Number: H104910LA

09035-41 Irreversible 1 Point Temperature Label, 260°C/500°F; 50/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1.8°F below 212°F and ±1°F above 212°F. Shelf life: 1 year after date of purchase.

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Save time and money due to costly recalls
• Self-adhesive design

SPMF-P1GB SPM Flex Portable Unit for Great Britain by Honeywell Analytics

Improving safety and productivity with the most flexible, user-friendly tape-based gas detector for low-level toxics Feel more confident than ever in your plant's safety and uptime.

In your critical operations, where distruptions can cost millions of dollars, do you have the right instrument for your toxic gas monitoring system? One that your workers feel confident using? One that provides the gas intelligence you need?

With SPM Flex, you never have to worry whether your single-point monitor will stand up to harsh conditions whether a false alarm will lead to a costly shutdown, or whether your workers will be able to correctly operate the device.

Instead, you can count on our Chemcassette® tape-based SPM Flex for unmatched accuracy, flexibility and ease of use - even in challenging environments. So you can rest assured that you're keeping your people safe and your operations running.

Rugged and reliable

Stands up to harsh conditions. Working in the sun and rain, around blasts of steam, or other challenging environmental conditions? The SPM Flex goes where you do, standing up to changes in temperature and humidity without compromising accuracy.

It also works well in cleanrooms, thanks to its Teflon coating that doesn't attract dust. And if it's ever exposed to toxic gas or caustic liquid, just hose it down or use a decontamination wipe.

New Enhancements

• Additional gas formulas
• Flip screen
• Duty cycle to reduce Chemcassette® usage
• K-factor multiplier

Crisp, clear visibility - from near and far

Visible at a distance

Thanks to a crisp display and a color-coded LED bar on top of the SPM Flex, you can see alarm status, gas concentration and other data easily from a distance. So even if you're not right next to your SPM Flex, you always know the health of your unit and the safety of your area.

Remote viewing through the web

Your visibility even extends to other rooms and buildings, thanks to the unit's web capabilities. Simply plug an Ethernet cable into the SPM Flex, and use the easy-to-read web interface to see the status of the unit - no matter where you are.

Flexible uses throughout your plant

Thanks to its robust design and intuitive operation, the SPM Flex can perform a variety of roles.

Emergency Response

When your emergency response team needs to respond quickly, the SPM Flex is the best tool for the job. With fast startup, easy operation in hazmat gear and rugged design, the SPM Flex is ready when you are.

Life Safety

The SPM Flex, capable of working as both a fixed and a portable unit, is an important addition to your toxic gas monitoring system. Use it to investigate suspected leaks, or, if you have a monitoring point that's out of service, use the SPM Flex to replace it - with the option to plug it in or use the long-lasting battery.

Tool Maintenance

When your crews need to perform maintenance on a process tool, they can take the SPM Flex with them to ensure safety while they work. With full data logging and an industry leading gas selection, you'll always have the assurance that your staff are safe every day, all day.

Advanced capabilities - no expertise required

Your workers may not use the SPM Flex every day, but when they need it, they'll be able to operate it with confidence. That's because this highly automated single-point monitor is intuitive, easy to use, and designed to fit the unique needs of your operation.

Easy to choose the target gas

Want to monitor for a certain gas? Just turn on the SPM Flex, snap in the proper Chemcassette® tape, and use the intuitive LCD menu to select the gas from the list. Need to monitor for a gas in a different family? Just swap out the Chemcassette tape and choose the new gas. No ChemKeys™ required.

Quick start-up for emergency response

The SPM Flex gets up and running in under two minutes - so your response team can quickly gear up and go to the site.

Easy to use with protective equipment or hazmat gear

Purpose-built with the user experience in mind, the SPM Flex is easy to carry, operate and read - even when you're wearing a hazmat suit or other protective gear. The monitor has large, chunky buttons that are easy to use. And when you carry the SPM Flex, the display faces up so it's easy to read.

Extreme Accuracy for Extreme Gases

The SPM Flex, the next evolution of our SPM and TLD gas detectors with Chemcassette tape technology, is capable of working as both a fixed and a portable unit. The monitor detects the ultrasensitive gases inherent in your operations, including: Hydrides, Mineral acids, Oxidizers, Amine.

Our Chemcassette tape technology shows the presence of gas - quickly and definitively with a physical record. So you can prevent costly downtime from false alarms.

Data logging and information management for total confidence

Access to detailed history

With the SPM Flex, you can rest assured that every monitoring moment is being recorded - and ready for analysis whenever you need it. Whether you want to report a gas incident or investigate a trend, the monitor keeps up to a three-month history of gas concentrations, alarms, tape changes and other factors. Plus, you have the option to view this data through a web server, or you can easily download it to a USB drive.

Easy to adjust configurations

Need to change the detection limit for a gas? Alter the parameters for latching alarms? Just adjust your settings with the intuitive menu - then use the USB port to download and transfer them to other units. So it's a snap to deploy multiple monitors with a consistent configuration.

Designed to the highest standard of reliability

Easy maintenance and long-lasting battery

The SPM Flex has easily serviceable parts and a reliable battery, so you can count on long-lasting portable use - and an affordable cost of ownership. Even more, if the SPM Flex is plugged in and you lose power, the internal battery kicks in as backup so the unit keeps monitoring.

All backed by the history and reputation of Honeywell

With the SPM Flex, like other products from Honeywell, you can have peace of mind from knowing your gas detection equipment is engineered to the highest standard of safety and reliability. We honor the investment you've made, and we're here to support you, giving you complete confidence in your facility's gas safety, compliance and uptime.

Honeywell Gas Detection Offerings

Honeywell gas detectors protect people, assets and environment from toxic and combustible gas hazards, helping to create safer, more comfortable, secure and productive environments. Our strength derives from Honeywell's leadership in sensor technology; in fact Honeywell operates four sensor manufacturing plants, supplying an entire industry with its core detective element.

Commercial

Gas detection from standalone units to fully engineered, multi-point systems, all offering cost-effective regulatory compliance.

• Applications: parking structures, chillers, mechanical rooms, office towers, commercial buildings, shopping centers, swimming pools, golf courses, schools and universities, laboratories

Industrial

Renowned Sieger and Manning gas detection systems with advanced electrochemical, infrared and open path sensing technologies.

• Applications: oil and gas, cold storage, water/wastewater treatment, chemicals, engine rooms, plastics and fibers, agriculture, printing and light industrial

Portables

Single or multi-gas ranging from compact, lightweight designs for personal protection to systems-based, networkable instrumentation for industrial hygiene.

• Applications: underground utility and electricity ducts, boiler rooms, post-fire sites, sewers, industrial plants, industrial hygiene, first responder teams, remote fleets

High Tech/Government

Reliable gas and chemical detection including infrared spectroscopy (MST) with no cross interference, to Chemcassette paper-based solutions (MDA Scientific) offering detection down to parts per billion.

• Applications: semiconductor manufacturing, aerospace propulsion, specialty chemicals industry, research laboratories, emergency response

Technical Services

24/7 global network includes post-sales service and Systems Integration teams.

• Emergency call out, service contracts, on/off-site repair, training and commissioning
• Complete range of spares, consumables and accessories

GHS1271 Health Hazard Pictogram Placard (10.75" x 10.75") by GHS Safety

These large format HazCom GHS Pictograms are 10.75" x 10.75" (273 mm x 273 mm) and perfect for marking your containment vessels or tanks. Printed on outdoor grade peel and stick vinyl with durable fade resistant inks, these pictograms are made to withstand the elements.

They come with a back split liner for easy application and are sold individually or in packages of 100.

DOCK2-2-1L-00-N MicroDock II Automatic Test and Calibration Station with GasAlertMicroClip Module (Charging) No Power Supply by BW Technologies

The most cost effective way to manage the calibration and bump testing of BW's portable gas detectors is through the MicroDock II automated test and calibration system. Fully portable and easily expandable, the MicroDock II requires no computer and provides simultaneous management of up to ten modules. Minimize expenses and maximize productivity with the MicroDock II.

• Quick and easy compliance - automatically maintain accurate records
• Automatic bump testing, calibration, record keeping and charging
• One base station with one AC outlet supports up to ten modules to suit your application

MicroDock II Features:

• Fully automatic "hands-free" calibration and functional bump testing
• Automatically verifies performance of audible and visual alarms
• Stores and updates calibration records in the MicroDock II, as well as in datalogging instruments
• Entirely self-contained with no computer required
• Lightweight and fully portable with optional wall mount
• Operates via 6V line power or a set of four C-cell batteries
• Fully customizable
• Add extra self-contained docking modules to system via simple, plug-in connections - no external pressure transducers or gas lines necessary
• Simple, accurate record keeping and fleet management
• Verifies proper performance of detectors
• Reduces maintenance costs
• Multiple MicroDock II systems can be connected via a LAN
• Includes BW Fleet Manager software for easy data analysis
• Multi-language support in English, French, German, Spanish and Portuguese

Part Number: DOCK221L00N