All Products

059-C110-000 ppbRAE 3000 Portable Handheld VOC Monitor - 10.6 eV Lamp, Li-Ion / Universal Charger by RAE Systems

The compact ppbRAE 3000 is a comprehensive VOC gas monitor and datalogger for hazardous environments. The ppbRAE 3000 is the most advanced handheld VOC monitor available for parts-per-billion detection. This third-generation patented PID device monitors VOCs using a photoionization detector with a 9.8 eV, 10.6 eV UV-discharge lamp.

The built-in wireless modem allows real-time data connectivity with the ProRAE Guardian command center located up to two miles/3 km away (with optional RAELink3 portable modem) from the ppbRAE 3000 detector.

Monitor only includes

• ppbRAE 3000 Monitor, with RAE Systems UV lamp, as specified
• Datalogging with ProRAE Studio II
• Charging/download adapter
• VOC Zeroing Tubes (1 box)
• Tube adapter
• Tedlar® bag for calibration
• Flex-I-Probe™
• External filter
• Rubber boot with straps
• Alkaline battery adapter
• Lamp-cleaning and tool kit
• Operation CDROM
• Operation & Maintenance manual
• Soft leather case

Monitor with accessories kit adds

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional calibration kit adds

• 10 ppm isobutylene calibration gas, 34L
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response time
• Extended range from 1 ppb to 10,000 ppm with best in class linearity
• Humidity compensation with integral humidity and temperature sensors
• Real-time wireless built-in - Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated Correction Factors list of 220 compounds more than any other PID
• Includes flashlight for dark conditions
• Large graphic display presents gas type, Correction Factor and concentration
• Easy access to battery, lamp and sensor in seconds without tools
• Rugged housing withstands use in harsh environments
• IP-67 waterproof design for easy cleaning and decontamination

Application

• Oil & Gas
• HazMat
• Industrial Safety
• Civil Defense
• Environmental & Indoor Air Quality

SPLIS1BAXYMAZZ Sensepoint XRL Fixed Point Gas Leak Detector, Bluetooth, ATEX, SO2 50.0PPM, MA, Yellow by Honeywell Analytics

Sensepoint XRL is a fixed point gas leak detector that is designed to meet the needs of industrial applications. With over 50 years experience in gas leak detection, Honeywell offers a flexible range of highly-reliable sensing devices to meet those needs.

• Quick installation
• Rapid configuration
• Simple to operate
• Straightforward to maintain

Honeywell innovation enables customers to pair the gas detector with their mobile phone, and then use an app to perform many tasks related to installation, commissioning and maintenance.

Flexible Output Options

Sensepoint XRL is available with either mA loop analog output or Modbus RTU. The result is a flexible solution that can easily be incorporated into legacy systems as well as new installations.

Easy Control and Maintenance

Sensepoint XRL's smartphone interface makes for much faster calibration, configuration and bump tests. Inspecting the status and settings of individual Sensepoint XRL detectors is simple. Use the mobile app to:

• Read gas concentrations in real-time
• Reconfigure settings
• Check unit histories

Automated Reporting

Increase the efficiency of your operations and reduce administration time. The app and Sensepoint XRL provides easy access to diagnostic information and generates calibration reports at the touch of a screen.

Compatible System Controller

Touchpoint Plus is the perfect complement to Sensepoint XRL, providing an intuitive, easy to operate gas detection solution to meet the needs of your business.

Visual Integration

Clean aesthetics and a choice of colors mean that the detector appearance can be selected to compare or contrast with the environment in which it is being used.

Typical Applications

• Manufacturing facilities and factories
• Water treatment plants
• Battery charging facilities
• Vehicle test facilities
• Petrochemical plants
• Fuelling depots

Accessories

• Calibration cap
• Collecting cone
• Pole Mount Bracket Kit
• Duct Mount Kit
• Weather Protection
• Flow Housing

FEATURES & BENEFITS

• Choose from a range of mA or Modbus output versions for flexible system design to meet the customers requirements.
• Selectable source or sink current for analog output enables one detector to be suitable for both system configurations.
• The ingress protection of NEMA 4X/IP66 allows units to be installed in outdoor environemtns.
• Simplified maintenance with familiar smartphone technology saves money and time.
• Multi-color visual indicator to show status makes it easier to know the detector status immediately and identify detectors that require attention or are warning of danger.
• Manage the detector without making a physical connection. Remove the need for physical access to hard-to-reach devices.
• One person calibration without the need to open the detector. Saves time and removes need for hot work permit.

Xgard Gas Detectors

Crowcon is a global leader in designing and manufacturing gas detection technology and equipment. The company has been in operation for over 40 years and is consistently building upon its products. By integrating modern technology with the demands of the modern workplace, Crowcon has developed a line of gas detection devices and monitors that lead the competition. The Xgard range of gas detectors is a product of Crowcon s successful integration and technological advancements. With a wide range of sensor types and available accessories, the Xgard series is suitable for all worksites and is customizable enough to fit any needs.

Tough and reliable

The Xgard series of fixed point gas detectors is incredibly durable and reliable. The casings and materials, including weatherproof caps, are designed to protect the equipment from the harshest environments. The detectors are made from a variety of materials depending on the model: glass reinforced nylon, aluminum with polyester coating, and 316 stainless steel.

Variety of sensors

The fixed point gas detector offers a wide range of sensors for to suite almost all applications. The Xgard range of gas detectors is available in three models to meet varying worksite needs: flameproof, intrinsically safe, and safe area formats. Additionally, Xgard offers different types of fixed point gas detectors within these three models:

• Xgard Type 1- Intrinsically safe toxic and oxygen gas detectors
• Xgard Type 2- Flameproof toxic and oxygen gas detectors
• Xgard Type 3- Flameproof flammable gas detector
• Xgard Type 4- Flameproof high temperature flammable gas detector
• Xgard Type 5- Flameproof flammable gas detector with 4-20mA output
• Xgard Type 6- Flameproof thermal conductivity type gas detector
• Xsafe- Safe area flammable gas detector

Cost efficient and highly effective

With quick and easy installation and maintenance, the Xgard series is able to keep costs at a minimum. The replacement sensors, for example, are simple to replace by merely plugging them in. The replacement parts are also readily available and compatible with all Xgard models, thereby reducing the amount of required spare parts that are stored in the facility. Additionally, the sensors have two times the typical life spans of similar sensors in the industry. With a 2 year life span, worksites can expect to cut their sensor replacement costs in half. For worksites that require slightly more customization, Crowcon offers compatible accessories for the Xgard series such as sampling applications, remote gassing applications, spray deflectors, sun shields, weatherproof caps, collector cones, flow adapter, and accessories adapter.

Xgard also has flexible installation options. The unit is designed for either wall or ceiling mounts, and users will not need to purchase additional equipment for mounting. For more complex installation needs, users can purchase accessories.

Specifications

Each model is approximately the same size with dimensions of 6.1 x 6.5 x 4.3 inches and weighing approximately 1 or 2 pounds. The battery type, electrical output, and power requirements vary based on the sensor type. For a complete listing of gas sensors, types, and individual specifications, please see the product specifications listing.

1418-024K Micro IV Value Kit with 3-Years Sensor Warranty, Hydrogen Sulfide (H2S), Standard 0 - 100 ppm by GfG

Durable, compact design

Widest Range of sensors

Easy Operation

Up to six months of battery life

Clip-on attachment

Optional motorized pump

Large graphic display

Audible, vibrating and visual alarms

Lifetime warranty

DS220 docking station

Features

• Highly configurable smart sensor design
• Wide range of sensors including O₂, H₂S, CO, NH₃, SO₂, CL₂, CLO₂, PH₃, NO₂, HCN, HCl, ETO, HF, O₃, NO, H₂, THT and more!
• Full 3-year warranty on O₂, CO and H₂S sensors
• Optional sample draw pump
• Large display with real-time readout
• Event / Datalogging standard
• Programmable ceiling (3), STEL & TWA alarms
• Vibrating Alarm standard
• AutoCal® automatic calibration
• Optional docking station

Value Kit Configuration

• All standard accessories: Micro IV detector, Specified Sensor, Alkaline Battery, Rubber Boot, Manual
• Calibration Adapter
• Calibration Gas
• Fixed Flow Regulator
• ABS Carrying Case

Part Number: SR-A1-4R

08080-96 Stainless Steel Bimetal Pocket Thermometer, 2" Dial, Poly Lens, 8" Stem, -40 to 160F, 2F Div by Digi-Sense

• Factory tested to three points with a ±1% accuracy
• Minimum immersion: liquids 2" (50 mm), gases 4" (100 mm)
• Hermetically sealed dial stops internal fogging
• Recalibrate using external adjustment nut
• 304 Stainless Steel dial case and stem
• Shock resistant

Includes

All thermometers come with a statement of test and a beaker clip.

SCT-108.003.12 SCT-BEN-CON-2 GLP Benchtop Conductivity Meter by ScichemTech

SCT GLP conductivity benchtop meter suitable for normal conductivity measurement.

Advanced and original conductivity measurement technology wide measurement range, high accuracy, conductivity measurement mode can be switch to TDS, salinity and resistivity.

Instrument resolution 1.0.

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• 1413 us/cm conductivity standard solution
• 9V power adapter
• Rs-232 communication cable
• Communication software cd
• Operation manual
• Packing list

Features:

• SCT benchtop meter is designed to measure conductivity and temperature.
• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Equips conductivity/ATC electrode. Its measurement result is fast and precise.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Ability to switch among conductivity,TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

90205-20 Traceable® Remote Probe Thermometer with Calibration; ±1.0°C accuracy (-20 to 100°C) by Digi-Sense

Magnetic back allows for placement on metal surfaces such as freezers, incubators, or water baths. Includes a flip-open stand for use on bench or desktop, and a spring fastener for clipping onto any edge.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Probe and cable may be totally immersed in liquid
• Readings update every second
• °F/°C switchable ranges

Includes

Probe, cable, flip-open stand, clip, magnetic back, battery, and NIST-traceable calibration certificate with data.

*Please note we can only ship RKI products to customers within the United States

Gasmaster Control Panel for Gas and Fire Monitoring

Crowcon Detection Instruments is a global leader in gas detection and safety equipment. With over 40 years of experience in research and technology, Crowcon is consistently leading the industry in design innovation. By integrating historical successes with advances in modern technology, Crowcon is able to consistently produce high quality products that meet today s challenging environments.

The Gasmaster is an innovative self-contained control panel that monitors gas and fire hazards. Its exclusive features allow the control panel to be flexible enough to fit most industrial applications. More importantly, its outstanding performance and leading technology make this panel an industry leader.

Exclusive Gasmaster Features

Crowcon sGasmaster contains numerous features that outperform the competition in gas detection and safety standards:

• Easy to use control features
• Easy to read backlit LCD display
• Unparalleled flexibility and compatibility with existing equipment
• Reliable alarm and safety features

Easy to Use

The Gasmaster is incredibly easy to read and operate. The front mounted display simultaneously broadcasts all of the appropriate gas levels while indicating the system status check. The front panel also houses the buttons that control the systems operations. All features of the Gasmaster, including recalibration, can be controlled by these easy to operate keys. With the simple push of a button, any user can easily operate the system s features. The Gasmaster s system s software was also designed with ease of use in mind. The software enables reconfiguration and datalogging instantaneously and requires minimal training.

The backlit LCD display screen provides all of the necessary safety information without overwhelming the user. Utilizing a large clear screen, the alphanumeric display reads the gas levels, displays the system status, and illuminates an alarm bar when necessary.

Flexible and Adaptable

The state of the art Gasmaster is incredibly versatile and flexible. The unit can monitor and control virtually any combination of gas and fire detectors. The unit also offers a variety of outputs

GA-SPAK02 SamplerPak Motorized Sampling Pump Kit, ATEX Approved, with Alkaline Batteries by BW Technologies

BW Technologies by Honeywell has developed and introduced a wide variety of hazardous atmospheric monitoring systems into the market. As an industry leader in customizable and dependable gas detection systems, BW Technologies continues to produce products that are customizable and innovative. With the differing needs of the various industries requiring gas monitoring systems, BW continues to produce the most trustworthy products and accessories on the market.

The SamplerPak

BW's SamplerPak is an easy, cost-efficient external motorized sampling pump designed for compatibility with any BW single or multi gas detectors. Users need only to attach the sampling pump to the detector for atmospheric sampling. The SamplerPak allows users to remotely sample the air quality in any given space. This can be especially useful for confined spaces or pre-entry tests.

The unit's high compatibility and customizable design is a standard feature of many BW Technologies products. The SamplerPak is easy to connect to any BW Technologies' single or multi gas detection system. In addition to any gas detection system, an external motorized sampling pump with remote sampling capabilities can provide safety and worksite managers with additional information they may need to determine the hazard level of any given environment. Please note that the SamplerPak is not a gas detector.

SamplerPak features

The Sampler Pak has many unique features that are exclusive to BW products. Each unit features a manual flow block test at start-up to validate operation, and leak tests to ensure effective draw. The unit also has built in water traps and a filtration system. Users can manually monitor water traps and filters. The SamplerPak is also capable of providing personal samplings or remote samplings. The time-tested sampling pump is available with a variety of models, accessories, and options to fit the unique needs of any workplace.

Options and accessories

As with most customizable products by BW Technologies, the SamplerPak offers optional accessories. Users may purchase a confined space kit, extra long probes, a battery charger, a sampling flat, and collapsible sampling probes. The unit can be powered by either AA alkaline batteries or AA NIMH rechargeable batteries. Both battery options provide approximately 30 hours of battery life. These options and accessories allow the basic sampling device to maintain its cost effectiveness while offering optional services to those in need.

Specifications

The SamplerPak weighs approximately 6.2 ounces and is designed to be lightweight and highly mobile. Measuring approximately 7 inches by 1 inch by 2 inches, the unit can easily fit into tight spaces and pockets. The Sampler Pak is equipped with visual and audible alarms of over 90 decibels, and will notify those nearby of system failures, low battery, or low airflow. Sample flow rate is 300 milliliters per minute and a sample distance of 50 feet. The typical delay time is approximately 3 seconds per 1 foot. The SamplerPak is purchased standard with a 2 year warranty.

With a BW Technologies SamplerPak, users can rest assured that they are receiving a superior, affordable, and reliable external sampling device.

Part Number: GASPAK02

628NF ORP/Temperature VisionPlus Pen with Memory & Replaceable ORP Electrode by Jenco

VisionPlus ORP628N is a very powerful ORP tester with temperature readout, IP67 rated body, 50 memory storage and replaceable ORP electrode module.

• Clear graphic LCD displays ORP and temperature at the same time
• Replaceable electrode module ensures extended usefulness
• IP67 water-proof, dust-proof body
• Battery life over 300 hours
• 50 memory storage of both ORP and temperature readings with memory location ID and date and time stamp
• Low battery indicator
• RoHS compliant

66-6203-50 T2A Sensor/Transmitter with j-box, Hydrogen Sulfide (H2S), 0-500 ppm by RKI Instruments

The T2A Series toxic gas detector is a versatile assembly that uses an electrochemical sensor to detect a variety of gases. 2-Wire loop-powered to withstand extreme climatic conditions and harsh environments. Magnetic switches allow for nonintrusive calibration while in the field.

Features

• Electrochemical Sensor
• Loop-Powered (2-Wired), 4-20 mA output
• 3 Character, 7 segment display screen with backlight
• 3 Push-button interface (ADD, MENU, SUB) with corresponding magnetic, non-intrusive switches
• Operating temperature range -40°C to +55°C
• Aluminum device enclosure
• 303 Stainless-steel sensor housing
• 1-Year warranty

Industry Applications

• Petrochemical plants
• Refineries
• Water & wastewater treatment plants
• Pulp & paper mills
• Manufacturing facilities
• Automotive
• Semiconductor plants
• Chemical plants

*Please note we can only ship RKI products to customers within the United States

73-0044RK-03 CO-01 Single Gas Personal Monitor, 0-500 PPM with Alkaline and Belt Clip by RKI Instruments

Certain working environments cannot avoid the potentially unsafe and hazardous conditions. In those situations, it is imperative that employees be equipped with the very best in workplace safety. The types of dangers resulting from hazardous conditions are vast, and the presence of dangerous gases can result in a number of undesirable outcomes such as asphyxia, fire or explosions, spontaneous combustion, and on a smaller scale, damage to the human body or equipment. Using state of the art gas detection technology, RKI Instruments developed the Single Gas Clip-On Personal Monitor to detect nearby atmospheric hazards and alert users in a quick and timely manner.

Single Gas Clip-On Personal Monitor

The Single Gas Clip-On Personal Monitor by RKI Instruments is a top of the line gas detection system that clips easily into place on a belt, pocket, helmet, or shirt. Its sensor detects the presence of four gases (oxygen, carbon monoxide, hydrogen sulfide, and combustible gas) and immediately alerts the user and those nearby. The device is small enough to be highly portable and is available at a very affordable price.

The Single Gas Clip-On Personal Monitor is available in four different models, each of which have been deemed safe for workplace use by CSA to U.S. and Canadian Standards for Class I, Division I, Groups A, B, C, and D atmospheres.

Triple Alarm System

When potentially hazardous atmospheric conditions have been detected, the Single Gas Clip-On Personal Monitor will activate its triple alarm system. The triple alarm is designed to alert the user and everyone within the vicinity. Once the alarm is activated, the backlight will turn on, the LED lights will flash, the audible alert will initiative, and the device will being to vibrate. The triple system is designed to be noticeable during a variety of working conditions when a user may not have full use of senses.

In addition to hazardous atmospheric conditions, the device will alert users when the battery is low, the sensors are malfunctioning, and more.

Specifications

The Single Gas Clip-On Personal Monitor has a response time of 20 seconds for oxygen levels and 30 seconds for carbon monoxide, hydrogen sulfide, and combustible gas. The unit is powered by alkaline dry cell batteries (2 AAA batteries) with a battery life of over 3,000 hours (except model GP-01 which has a battery life of 16 hours). The unit is also equipped with a Peak hold function and STEL & TWA function. Its pocket size dimensions (1.4 W x 4.1 H x 0.8 D) and light weight (3.5 ounces) renders the device highly portable.

Accessories

The Single Gas Clip-On Personal Monitor is compatible with a number of accessories that help to customize the unit to meet a specific workplace's needs. The unit comes standard with rubber protective boots, alkaline batteries, belt clip or alligator clip, and wrist strap. Optional accessories can also be purchased such as a calibration cap, calibration kit, charger unit, and battery pack.

*Please note we can only ship RKI products to customers within the United States