All Products

28163 Si-RM450 manifold kit 2 includes 1x Si-RM450 4-way manifold, 2x Si-RT2 wired temperature clamps, 1x set of 4 hoses, hard plastic case, batteries and adjusting certificate by Sauermann

These manifolds can be used to commission and service all types of refrigerant-based installations: heat pumps, air conditioning, refrigeration and reversible systems, from domestic systems to complex industrial machines.

Very easy to operate, this equipment features the latest technologies for fast, comprehensive system diagnostics. Its smart digital assistant guides the operator in every situation to help him achieve his objectives in the best possible way.

Features

• 130+ refrigerants supported. Auto updates to industry evolutions
• Perfect readability in daylight sun
• Backlit for indoor use
• Industry leading anti-glare design
• Internal memory data-logging up to 3 days with 300 h battery life
• Anti-theft padlock slot, rear hook and USB-C wired power supply
• Wired and wireless probes (100 m/328 ft range)
• IP54 dust & rain proof body
• "Parrot" clamp shape optimized for 6 to 42 mm (0.2" to 1.7") pipes
• 8 integrated measurement programs
• New "Easy Mode" with single pressure port connected
• Efficiency calculations: COP and EER ratings

66-6303-2K AirLink T3A Sensor/Transmitter with j-box, Hydrogen Sulfide (H2S), 0-2000 ppm by RKI Instruments

The AirLink T3A Series Gas Detector ambient air hazardous gas detector is a versatile assembly that uses an electrochemical, infrared, catalytic bead sensor element to detect a variety of gases. Wired power (12 to 35 VDC) with wireless communication controller. An RKI wireless T3A also has 4-20 mA analog and RS-485 Modbus outputs as standard. Magnetic switches allow for non-intrusive calibration while in the field as well as full system settings and diagnostics.

Features

• Electrochemical, Infrared, catalytic bead sensors
• Wired power (3-Wire), 12 to 35 VDC operating voltage
• Output options: Wireless 900 MHz or 2.4 GHz; 4-20mA (3-wire) analog; RS-485 modbus
• Operating temperature range -40°C to +54°C
• Graphical LCD with LED backlight
• 3 Push-button interface (ADD, MENU, SUB) with 3 corresponding magnetic, non-intrusive switches
• 2 Individually configurable alarms
• 2 Front panel LED indicators (amber and red)
• 2 Optional fully programmable alarm relays (dry contacts)

Industry Applications

• Petrochemical plants, Refineries
• Water & wastewater treatment plants
• Pulp & paper mills
• Manufacturing facilities
• Chemical plants

*Please note we can only ship RKI products to customers within the United States

VPX-MJ432110G1C Ventis Pro Series, CH4 (0-5%), CO/H2S, NO2, O2, Li-ion Ext Range, Desktop Charger, With Integral Pump, Black, China Ex, CPA, LENS Wireless, Chinese by Industrial Scientific

Detect up to five gases simultaneously with the rugged, wireless, Ventis® Pro5 Multi-Gas Monitor. With Ventis Pro5, safety goes beyond the gas detector whether you need team-based alarm sharing, remote monitoring with location details, or both. The monitor is also backed by a Guaranteed for Life™ warranty.

• Eliminate the need for two pieces of equipment by using Ventis Pro5 for personal monitoring and confined space entry.
• Train workers on one, multi-purpose gas monitor and reduce the risk and investment of having different devices in the field.
• Improve team and site safety by locally sharing alarms and gas readings between wirelessly connected Ventis Pro5 monitors.
• Get real-time location and alarm data directly from Ventis Pro5 gas monitors to a designated safety contact with the optional cellular or wi-fi battery pack.
• Reinforce safe behavior with programmable alarm action messages like "EVACUATE" or "VENTILATE" based on alarm level.
• Simplify the user experience with the ability to hide unnecessary screens based on user needs, role, industry, or site.

VTS-M1432111301 Ventis MX4 Personal Gas Monitor, CH4 (0-5%), CO, NO2, O2, Li-ion Extended Run Time Battery, Desktop Charger, Pump, Orange, MSHA, English by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

CC-0003-AD Corrosion Coupons: Admiralty Brass, Alloy CDA443 by AquaPhoenix

3" long × 1/2" wide × 1/16" thick. 3/16" hole 1/4" from end.

66-5A66-2K-L Air Alert Ambient Air Hazardous Gas Detector, sulfur hexafluoride, SF6, AC powered, with 3-color alarm LEDs/buzzer by RKI Instruments

The RKI Air Alert series ambient air toxic gas detector is a versatile assembly that uses an electrochemical, infrared or PID sensor element to detect a variety of gases. Wire powered (12 to 35 VDC) with 4-20 mA analog and RS-485 Modbus outputs. Magnetic switches allow for non-intrusive calibration while in the field as well as full system settings and diagnostics.

Features

• Electrochemical, Infrared, or PID sensor element
• Wire powered (3-wire), 12-35 VDC operating voltage, optional AC power supply
• Operating temperature range of -40°C to +70°C
• 3 Push-button interface (ADD, MENU, SUB) with 3 corresponding magnetic, non-intrusive switches
• 2 Dry contact relays (optional)
• Graphical LCD with LED backlight
• Output options: 4-20mA (3-wire) analog, RS-485 Modbus, optional 900 MHz or 2.4 GHz radio
• Optional 3 color LED perimeter and audible alarm
• 1-Year warranty

Industry Applications

• Petrochemical plants, Refineries
• Water & wastewater treatment plants
• Pulp & paper mills
• Manufacturing facilities
• Chemical plants

*Please note we can only ship RKI products to customers within the United States

BZ1-LJJ35R0211 Radius BZ1 Area Monitor, LEL (Methane), CO/H2S (DualSense), O2, SO2, PID, No Pump, ATEx/IECEx, LENS Wireless, English by Industrial Scientific

When it comes to choosing equipment to protect your worksite from gas hazards, rely on the Radius® BZ1 Area Monitor. No other area monitor protects your workers longer in the field with less setup, user training, and time in the shop.

• Detect up to seven gases using 22 sensor options including PID
• Longest running area monitor with a typical run time of 7 days (168 hours)
• Extended Run Time Power Supply can extend battery to over 1 month
• Ultra-bright blue and red lights and attention-grabbing alarms with distinctive tones
• Audible alarms sound at 108 dB at 1 m to cut through high-noise environments
• Largest display of any area monitor on the market
• Intuitive text-based navigation and configuration
• Customizable alarm action messages such as "EVACUATE" or "VENTILATE"
• LENS™ Wireless enables communication between area monitors and Ventis® Pro5 personal monitors
• All-weather sensor deployment and 360-degree gas path for more accurate detection
• DualSense® Technology increases worker safety by using two sensors to detect the same gas

66-6192-05-W AirLink VOC Pro (10.6 eV PID) 0-50.00 ppm, Low Range Sensor/Transmitter with J-box and 900 MHz Radio by RKI Instruments

The AirLink VOC Pro Series Gas Detector is a versatile assembly that uses a PID sensor to detect a variety of gases. It is wire powered (12 to 35 VDC) with wireless communication to an RKI wireless controller and also has a 4-20 mA analog and RS-485 Modbus outputs are standard. Magnetic switches allow for non-intrusive calibration while in the field as well as full system settings and diagnostics.

Features

• PID sensor options: 10.0 eV lamp / 11.7 eV / 10.6 eV ppb / 10.6 eV ppm
• Wired power (3-Wire), 12 to 35 VDC operating voltage
• Output options: Wireless 900 MHz, or 2.4 GHz; 4-20mA (3-wire) analog; RS-485 modbus (4 wire)
• Operating temperature range -40°C to +54°C
• Graphical LCD with LED backlight
• 3 Push-button interface (ADD, MENU, SUB) with corresponding magnetic, non-intrusive switches
• 2 Individually configurable alarms
• 2 Front panel LED indicators (amber and red)
• 2 Optional fully programmable alarm relays (dry contacts)
• 1-Year warranty (see specifications)

Industry Applications

• Petrochemical plants, Refineries
• Water & wastewater treatment plants
• Pulp & paper mills
• Manufacturing facilities
• Chemical plants

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

18520-27 Type K Thermocouple Inconel Probe Quick DisConnector, Dual with Std-Connector, 18" L, .250 Dia, Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with ICONEL 600 sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

18525-32 Type T Hermetically Sealed Tip Insulated Thermocouple, 20ft L, 24 Awg by Digi-Sense

Do not subject type J exposed-junction probes to moisture as they will rust

• Each Probe is hermetically sealed and tested to 25psi
• Can be used for applications requiring an isolated junction.
• Response Time: 0.75 seconds or greater
• All insulated-wire probes include straight insulated cable with no handle and stripped lead ends Custom designs or changes to this product are available upon request

71252 UpClose G2 8x40 Porro Binocular by Celestron

• High quality binoculars at an affordable / economical price
• Multi-coated optics increase light transmission resulting in brighter and sharper images with high contrast levels
• Stylish rubber covered aluminum body protects from rough handling
• Ergonomic thumb indents and finger ridges for extra non-slip comfort and ease of use
• Water resistant
• Soft carrying case
• Binocular straps

Perfect For:

• Bird Watching
• Sporting Events
• Nature & Wildlife
• Hunting
• Travel & ventures
• Concerts & live events
• Boating

18527-13 Miniature Type-K Thermocouple Male Connector, 2 Pin by Digi-Sense

• Molded barriers prevent short circuit and the solid pin design ensures good contact even in demanding applications
• Miniature connectors are suited for small wires and mineral insulated cables
• Connector-body color is brown, calibration type (J or K) is printed on the body

Part Number: Z105325PM30

GHS1057 Corrosion Pictogram Tag (25/pk) by GHS Safety

HazCom GHS Pictogram Tags offer a quick and easy way to identify hazards throughout your facilites. Perfect for marking drums, valves, cylinders and many other applications. Each durable plastic tag has the HazCom GHS pictogram and written description both sides, so the hazard information is always visible. Available in English/Spanish or English/French versions. 25 tags per pack. EN/ES

Part Number: F105325PM92

Part Number: 221L-390

09035-00 Irreversible 10 Point Vertical Temperature Label, 104-160°F/40-71°C; 10/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1°C from 29 to 99°C, ±1.5°C from 100 to 154°C, and ±1% ± 1°C from 160 to 280°C. Shelf life: one year after date of purchase.

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Self-adhesive design