All Products

Part Number: CRMMCUSB1

Part Number: 34L-310-18

44ES-HCL-10 44 Liter Single Gas (10 PPM HCL) Ecosmart Refillable Cylinder, Nitrogen Balance by Gasco

The NEW 44-liter refillable, portable cylinder that delivers 29% more calibration gas than the disposable 34-liter cylinders. 44-liter ecosmart cylinders hold pure and mixed gases and are interchangeable with the current 34-liter aluminum cylinders on the market.

Features & Benefits

• 44-liter
• Refillable
• 29% more capacity than the standard 34-liter cylinder
• Portable
• Lightweight
• Interchangeable with 34-liter disposable cylinders
• Increases efficiency
• Holds pure and mixed gases
• Eliminates disposal fees and regulatory paperwork

WD-35634-09 Replacement Sensor Cap by Oakton

Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample. For your convenience, cables, power adapters, and other accessories are available for your Oakton meters and pocket testers.

WD-35650-14 ORPTestr 10 BNC Portable Waterproof ORP Tester by Oakton

Large, two-line display

You ll never loose this tester by dropping it into a tank or pond; the waterproof ORPTestr floats! IP67-rated housing protects the instrument from rugged field and plant environments. Push-button calibration lets standardize tester in calibration solutions, or making it agree with an established work standard.

Replaceable sensor on ORPTestr 10 lets you reuse meter body many times without losing waterproof and dustproof protection. Large surface area platinum band sensor gives a faster, more stable response.

ORPTestr BNC accepts any ORP electrode with BNC connector; order electrode separately (see WD-35805-15).

• Waterproof, dustproof housing floats!
• Double-junction electrode is ideal for dirty water, heavy metals, sulfides and organics
• Replaceable sensor lets you reuse same meter body, saving you money
• Push-button ±150 mV offset adjustment

Ultima X5000 Gas Detector, H2S 0-100 PPM 4-20MA by MSA

The ULTIMA® X5000 Gas Monitor is the future of gas detection for oxygen, toxic and combustible gases. MSA XCell® gas sensors with TruCal® technology offer calibration cycles up to 24 months (local calibration respected). The gas transmitter's advanced, multi-lingual OLED display is easy to read and the unique touch-screen interface makes it simple to navigate.

FEATURES:

• TruCal* technology actively monitors the sensor integrity and compensates for environmental factors that cause regular electrochemical sensors to drift.
• Organic LED (OLED) display and bright status LED's for extreme visibility
• SafeSwap enables safe and quick replacement of gas sensors without turning off the instrument
• Dual sensor capability doubles the sensing power with half of the footprint of a single gas transmitter
• Bluetooth wireless technology allows mobile device to act as an HMI screen and controller. The X/S Connect App is designed with high security standards and provides real-time information to your mobile device
• Unique touch-button interface for an intuitive user experience and tool-free operation.
• Identical footprint and wiring as the ULTIMA X series makes retrofits simple using the existing conduit and wiring as well as an integral mounting bracket
• Cloud connectivity available with FieldServer ProtoAir FGFD Gateway
• Three-year warranty on XCell sensors
• TruCal* technology actively monitors the sensor integrity and compensates for environmental factors that cause regular electrochemical sensors to drift.
• An industry first, Diffusion Supervision warns if sensor inlet becomes blocked and unable to detect gas
• Organic LED (OLED) display and bright status LED's for extreme visibility
• SafeSwap enables safe and quick replacement of gas sensors without turning off the instrument
• Dual sensor capability doubles the sensing power with half of the footprint of a single gas transmitter
• Bluetooth wireless technology allows mobile device to act as an HMI screen and controller. The X/S Connect App is designed with high security standards and provides real-time information to your mobile device
• Unique touch-button interface for an intuitive user experience and tool-free operation.
• Identical footprint and wiring as the ULTIMA X series makes retrofits simple using the existing conduit and wiring as well as an integral mounting bracket
• Cloud connectivity available with FieldServer ProtoAir FGFD Gateway

500-1 Handheld Combustion Efficiency Emissions Analyzer includes O2 (Oxygen) Sensor by Enerac

Enerac invented the first electronic portable multi-parameter combustion analyzer in 1979 (in the USA). Enerac still services this analyzer as well as all others Enerac has manufactured. The Enerac Model 500 is a low-cost, easy to use (no technical expertise needed) portable combustion efficiency emissions analyzer. The Enerac 500 is perfect for determining the efficiency of a combustion source as well as for collecting advanced emissions data for internal use, or for local, state and federal emissions reporting requirements.

The Enerac 500 is perfect for testing various combustion sources, such as boilers, burners, engines, turbines, generators, kilns, dryers, heaters and ovens (just to name a few). Equally, with a simple combustion efficiency test, or a more advanced combustion emissions test, the Enerac 500 is designed to provide years of trouble-free service. It is flexible enough to be tailored to meet your specific needs, yet simple enough to be completely maintained in the field. Advanced design, rugged construction and an impressive array of options are its hallmark. Constructed as a field work-horse the Enerac 500 can be upgraded (adding sensors and options to the same unit) to meet your changing needs at any time.

Introduction

The Enerac 500 provides a comprehensive range of automatic emissions calculations, advanced Enercom Windows Software, two-way communications and factory support. From low NOx burners, (0.1ppm NOxresolution) to large rich burn engines (5,000ppm (NOx)/20,000ppm CO) the Enerac 500 is designed to help meet your needs of various monitoring applications at an affordable price.

The Enerac 500 handheld combustion efficiency emissions analyzer, is our newest, low cost, Emissions-Monitoring System, utilizing standard electrochemical sensors. It is designed to help you meet the challenges of a rapidly changing regulatory environment. It is easy to use, comprehensive (O2-CO-NO-NO2-(NOx), SO2, Combustibles, Stack Temperature, Draft), and flexible.

• A micro-sized Combustion-Efficiency analyzer and Emissions-Monitoring System
• Thermoelectric Condenser / Peltier Cooler (sample conditioning system for proper detection and measurement of NO2 and/or SO2 gasses
• Powered by 4xAA Rechargeable batteries
• Built-in Thermal Printer: 2" Character-type
• Our Enercom Windows Software included
• USB and Serial Ports included. Bluetooth Wireless (optional)

Rugged

The Enerac 500 is designed for years of trouble-free service. Housed in a rugged, lightweight aluminum case, its modular design allows end-users the ability to replace a battery or sensor, in a matter of seconds. Reducing both downtime and costs.

• Rugged lightweight aluminum case
• Work-horse of the industry
• Won't warp or crack like plastic models
• Small, lightweight and tough
• 2 Year Warranty
• 24 Hour Service
• Best service and support in the industry

Comprehensive

The Enerac 500 provides an extensive range of data management, and support options. It not only (automatically) performs complicated emission calculations, it can even allow the user the ability to identify specific data sets with a specific customer, dramatically reducing retrieval and processing costs.

Enerac 500 is compatible with Enerac's advanced Enercom for Windows ™ software. All parameters can be continuously displayed; Minimum, Maximum, Averages and Standard Deviations calculated; Multiple plots and graphs can be viewed or printed. With the Enercom software, data management and report writing is now a snap. With the Enerac 500, help is never more than a phone call or email away.

Affordable

With all these capabilities the Enerac 500 is surprisingly affordable.

• Buy only what you need and add options later
• Always upgradeable (anytime)!
• Free software and accessories
• Receive a generous trade-in allowance on your old analyzer
• Loaners available at no charge.

Compliance Level

The Enerac 500 can be configured to a compliance-level analyzer with addition of several key features. The Enerac 500 has the ability to produce Total NOx data for one. With both the NO and NO2 sensors Total NOxis obtained (NOx)=NO+NO2 on stationary combustion sources). The ability to also configure the 500 with High Sensativity sensors allows extreme accuracy over the sensors shorter range etc. Additionally, the 500 has the option to have the Thermoelectric Condenser (also called Peltier Cooler) option installed. This is a sample conditioning system (usually found on our competitors larger more expensive units) essential for proper NO2 and or SO2 gas detection and measurement. With the final addition of the viton hose, sample quality is maintained and compliance level data obtained. Therefore, the Enerac 500 is perfect for meeting your local, state and federal regulatory emissions compliance requirements.

• Free data collection software
• Time-stamped internal data storage
• Total NOx (NO and NO2)
• High Sensitivity / Low Range Sensors Available
• Viton and Teflon hose options
• Sample Conditioning System (for proper NO2 and/or SO2 gas detection and measurement)
• Field replaceable sensors
• Easy field calibrations (if desired)
• Comply with local, state and federal emissions requirements

In a world of downsizing, and increasing workloads, the Enerac 500 can help you simplify your job. With a broad array of available options, the Enerac 500 will provide you with the capabilities you need, when you need them, all within your budget.

5201-2128 GDC-150 Gas Sensor Transmitter, NEMA 4 Housing, TVOC (0-50 ppm) PID Sensor w/Display by Bacharach

The all new GDC-150 transmitter from Bacharach offers detection and protection for a wide range of hazards including toxic gases such as carbon monoxide (CO), oxygen depletion, combustible gases, refrigerant leaks and total volatile organic compounds (TVOCs). Analog interfaces allow the transmitter to be connected back to Bacharach's GDA Series of controllers (or any other gas detection controller), building management systems or control systems. The GDC-150 features 4-20 mA or 0-10 VDC linear output signals, an automatic thermal resetting fuse, RoHS compliant circuit boards and LED indicators for power and open loop.

The onboard alarm LED's indicate when alarm threshold values are exceeded. The unit can be ordered with an optional alpha numeric LED display that shows gas concentrations in real time while alarm relays alert personnel of potential dangers, avoiding incidents and potential hazards.

The GDC-150 is packaged in a rugged, polycarbonate housing for both indoor and outdoor applications. When leaks occur, the GDC-150 sensors respond quickly and accurately to protect people and property. Automated calibration and simple maintenance procedures performed in the field allow for continuous operation and assurance that areas are monitored and protected at all times.

Part Number: 58L-99-200

Old Part Number: P1016200N
New Part Number: P1016200PN

Part Number: 34L-430

2109-1000 EC 21 Fixed Gas Transmitter with Internal Sensor, Ammonia (NH3), 1 ppm, 0 - 1000 ppm by GfG

GfG s EC 21 transmitter for detecting toxic gases in ambient air is an inexpensive gas detection solution for use in a wide variety of today's industrial applications.

Simple gas detection

The EC 21 is the simplest way to monitor ambient conditions. Simply attach the EC21 to a GfG controller or a PLC to continuously and efficiently monitor the concentration of hazardous toxic contaminants in the air.

The EC 21 is reverse-wire protected to prevent damage due to incorrect wiring of the device. The power connector hasa "quick disconnect" feature to simplify transmitter installation and service.

Mounting Position of the EC 21

To determine the mounting position of the EC 21 it is important to know and consider the ambient conditions. To achieve the best results, the ventilation conditions and the density of the gases need to be considered.

The EC 21 must be installed so that the gas reaches the sensor even in poorly ventilated areas. If necessary, check the area with a smoke cartridge.

Other influences such as water (rain, dripping or condensation) and dust need to be considered as well.

Features

• Simple to use and extremely economical
• Robust housing is corrosion resistant and dust-tight>
• Linear 4 to 20 mA output signal
• 18 - 24 VDC

M5IR-XWBH-R-D-D-B-N-00 GasAlertMicro 5 IR Detector CO2 (IR), % LEL, O2, H2S - Rechargeable Battery - Black Housing by BW Technologies

The GasAlertMicro 5 Series is the most customizable gas monitoring series on the market. With an extensive selection of models, user options, and instrument settings, this multi-gas detector series is an industry leader. BW Technologies by Honeywell recognizes that not all worksites can operate with a one size fits all model of gas detection devices. With the introduction of the GasAlertMicro 5 Series multi-gas detectors, worksites, managers, and users can utilize the customizable features to ensure that the instrument meets their specific worksite needs.

GasAlertMicro 5 Series models

This multi-gas monitor series is available in several models: the standard toxic gas model, a PID model for detection of VOCs, or an IR model for CO2 detection. The unit accurately and reliably identifies up to five atmospheric hazards simultaneously and can rapidly switch from diffusion mode to the optional integrated pump.

Each model of GasAlertMicro 5 Series has several distinct features. With the GasAlertMicro 5 Series, the standard toxic gas model, users can monitor several standard gases with a plug in electrochemical cell sensor and catalytic cell sensor and a typical battery life of 20 hours (AA Alkaline rechargeable). The GasAlertMicro 5 PID is standard with several gas detections, a plug in electrochemical cell sensor and photoionization detector, and a battery life of approximately 15 hours (AA Alkaline rechargeable). Finally, the GasAlertMicro 5 IR features specific gas detection ranges, a plug in electrochemical cell sensor, a catalytic cell sensor, and an infrared sensor for carbon dioxide monitoring. This model also has a battery life of approximately 15 and AA Alkaline rechargeable batteries. For more information about available sensor configurations, please contact BW Technologies by Honeywell.

Exclusive features

Each GasAlertMicro 5 Series device features several exclusive features including a triple alarm system, raised glove-friendly buttons, a large easy to read display, stainless steel alligator clip, visual filter inspection, and automatic activation tests. When the unit is activated, the gas detector will automatically test for sensor integrity, circuitry, and battery. This continuous and reliable testing process ensures that the integrity and dependability of the device is never a concern.

BW Technologies by Honeywell also recognizes the unique needs of the various industries with environmental hazards. With each industry anticipating a separate set of possible dangers, the ability to customize safety devices is critical.

Users and worksite managers will be comforted to know their GasAlertMicro 5 series model is fully customizable. Customizable features include STEL intervals, TWA methods, sensor activation, alarms, display settings, record keeping, pumps, combustible gas measurements, start up calibration, backlights, activation modes, calibration levels, daily bump tests, and languages. To protect the integrity of the user settings and the safety of the gas monitoring device, the GasAlertMicro 5 device features a passcode function to prevent unauthorized manipulation of settings.

Accessories

The GasAlertMicro 5 Series is also compatible with BW's MicroDock II automatic test and calibration system. Users may purchase additional accessories to help fully tailor the gas detection unit to their needs. Accessories include an integral pump and battery charger, a confined space kit, a belt holster, and a collapsible sampling probe.

Part Number: M5IRXWBHRDDBN00

SCT-108.002.08 SCT CADE Conductivity/TDS/Salinity/Resistivity/DO/Temp Meter by ScichemTech

Includes:

• Plastic conductivity electrode
• DO electrode
• 1413us/cm conductivity standard solution
• Membrane cap (DO electrode use)
• DO electrode inner solution
• Cathode polishing paper
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for conductivity and dissolved oxygen measurements.
• Double-parameter meter equipped with conductivity electrode and dissolved oxygen electrode, automatic identification of electrode by meter.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, automatic power-off and low voltage display.
• Automatic identification of 7 conductivity standard calibration solutions, two options of standard calibration solutions: Europe and America series.
• Adopt advanced conductivity measurement technology, use conductivity electrode of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.