All Products

*Please note we can only ship RKI products to customers within the United States

72-6KEX-A GX-6000 One Sensor Sample Draw Gas Monitor, Oxy/IR CO2(10, 000 ppm), with alakline battery pack by RKI Instruments

Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Features

• Monitor up to 6 gases
• 2 smart sensor slots auto recognize PID, IR, and super toxic sensors
• 5 Operating modes: normal, leak check, inert, snap log and bar hole
• Library of over 600 VOCs
• PPM Leak Check mode
• Man-down and panic alarms
• Auto display rotation
• LED Light source
• Internal sample pump
• Glove friendly glow in the dark buttons
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs Li-ion / alkaline
• Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours
• Field replaceable sensors, batteries and filters

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

Part Number: 74-DAF-REG

6800530 Sensor, XXS O2 PR by Draeger

A small sensor - a giant step into the future: The new DraegerSensor XXS is remarkably compact, and boasts an even higher performance than the competition.

Electrochemical sensor XXS

?
• monitoring of toxic gases and lack of oxygen
?
• compatible with: Pac series and X-am family
?
• measuring range: in vol.-% and ppm

Excellent long-term stability and short response times

Excellent long-term stability and short response times contribute to the user being rapidly and reliably warned about dangerous gases.

Constant development

The continuing development of recognized electrochemical principles and a combination of new miniaturized design elements has made it possible to drastically reduce the volume and weight of the sensors.

High sensitivity and improved gas selectivity

The DraegerSensor XXS stands out thanks to its high sensitivity and improved gas selectivity.

Internal development

All the sensors are developed and manufactured by Draeger, ensuring the highest quality and top measurement performance. When used together with Draeger developed gas detection devices, the full performance of the sensors is realized.

18523-03 Type J Thermocouple Inconel Probe Quick DisConnector, Dual with Std-Connector, 18" L, .188 Dia, Ungrounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with ICONEL 600 sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

37804-06 Traceable® Scientific Single-Input RTD Thermometer with Calibration; Penetration Probe by Digi-Sense

This high-precision thermometer is ideal for measuring temperatures in gas systems, reagents, chemical solutions, soil, water baths, ovens, incubators, pharmaceuticals, foods and wastewater. Designed for years of reliable service even in severe environments, the meter features a splash proof membrane keypad. A high-contrast 1/2"-high LCD makes the thermometer easy to read in all types of light. The meter features memory and hold function, internal datalogger that captures the min/max temperature every hour for a 24-hours period, and °F/°C selection. For easy reading, the meter can be changed to display one, two, or three significant numbers after the decimal point. The fast-response general purpose probe (included) displays even the slightest temperature change instantly. Readings are updated three times a second. The internal memory can be downloaded into a computer using optional software 90080-21.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data, general-purpose penetration probe, plastic carrying case, and one 9 V battery.

90300-69 Ultra Low Freezer Verification Thermometer; -90 to 25C, PFA Coated by Digi-Sense

Accurately monitor temperatures in freezers, refrigerators, incubators, ovens, and other environments where stability is required. These thermometers are supplied in a media-filled unbreakable plastic bottle and can be removed from the bottle for recalibration. Use the magnetic attachment with pressure-sensitive backing to attach the bottle to a metal wall or door.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered. Include an statement of accuracy and a triangular-style antiroll fitting.

• An individually serial number is printed on the thermometer stem
• Nonmercury blue spirit liquid
• NIST- traceable statement of accuracy included

*Please note we can only ship RKI products to customers within the United States

IS200CD-K Combination Potassium ISE Electrode, 6.5"(165mm) L x 0.48" 12mm OD), 30" (.76m) Fixed Cable, Black Epoxy Body by Sensorex

Sensorex offers a combination Ion Selective Electrodes (ISE's) for Fluoride (F-), Chloride (Cl-), Ammonium (NH4+), Postassium (K+) and Nitrate (NO3-) measurement. These covenient combination electrodes use just one electrode to measure ppm of ions.

All Sensorex ISE's are housed in rugged plastic bodies and offer a choice of fixed cable or detachable cable design.

Use these electrodes with your ISE meter, pH meter in mV mode or with any mV input device.

Sensorex ISE's require little to know cleaning and are maintenance free (no reference or ISE refill solution required).

Each electrode is shipped in a bottle with or without a storage solution and are ready for immediate use.

• Easy-to-use combination sensors
• ISE types available: Fluoride (F-), Chloride (Cl-), Ammonium
• (NH4+), Postassium (K+) and Nitrate (NO3-)
• Fixed cable or quick-disconnect cartridge
• Rugged epoxy body

TIP-AI-AA-002-ZZ TXgard IS+ Toxic Gas Detector with Display, Hydrogen Sulphide, 0-100ppm, Top Cable Entry, UL approval by Crowcon

TXgard-IS+ is a Intrinsically Safe (I.S.) toxic and oxygen gas detector with local LCD display. A wide choice of sensors are available for use in a variety of applications.

Features:

Non-intrusive calibration

• Calibration can be performed locally without the need for hot work permits
• Local display and buttons enable calibration without opening the junction box

Flexible output options

• A two-wire 4-20mA signal is provided
• The output can be forced up without applying gas to enable simple checking of control systems and alarms.

Rugged and reliable

• Constructed using highly durable GRP to provide good impact resistance
• Ingress protection to IP65 as standard, IP66 with accessory
• IEC61508 SIL compliant

TDS1500/G Conductivity Solution, 1500ppm/2060uS, 1 Gal. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

*Please note we can only ship RKI products to customers within the United States

08107-05 TI.ST Dual-Magnet Surface Thermometers; Range 50 - 750F by Digi-Sense

An ideal choice for use on ovens, boilers, process lines, motors, or anywhere a surface temperature needs to be measured. The specially designed bimetal sensing element and housing provide quick readings. These thermometers feature a dual magnet mount that will attach to an ferrous surface, steel case, glass lens and polished aluminum 2" dial with easy-to-read graduations.

• For reference only, not intended for applications where a precise reading is required
• Item is not recommended to be calibrated

AgrowDose™ AD2i Dual Intelligent Dosing Pump by Agrowtek

AgrowDose AD2 "dual" peristaltic dosing pump with two independent pump heads for injecting nutrient solutions, pH buffers, chlorine, chemicals, food and beverage mixing, and more. Pump precise volumes of liquids at variable flow rates into reservoirs or pressurized lines (up to 25psi.)

AgrowDose pumps connect instantly to Agrowtek's intelligent SXH and PHX dosing controllers through the GrowNET™ port for advanced automated dosing functions. Use stand-alone with the LX1 USB AgrowLINK for PC batch dosing, or the LX2 ModLINK for MODBUS.

Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

Features

• Two independent dosing pumps
• Precision dosing accuracy
• 12V DC input power: 120V Wall adapter included
• Easy-change pump heads: Twist & replace; no tools required
• 1-Year Warranty
• WiFi optional
• GrowNET™ Digital Communication Port
• MODBUS RTU for industrial PLC control: Independent variable speeds, reversable
• Durable powder-coated steel enclosure
• Made in USA

VX8i Digital Intelligent Irrigation Valve Controller by Agrowtek

GrowControl™ VXP expansion panels features 8 zone valves, a 1" PVC manifold, and a valve controller mounted on a stainless steel back panel. Connects to BDX BatchMatic Dosing System to expand the number of zone valves on the system. Refer to thefertigation system specifications for expansion capabilities.

VX valves are made in the USA and feature a unique fail-closed design preventing flooding in the event of a valve failure.

VX8 digital valve controller features LED indicators displaying which valve is currently active. Includes 120V wall power supply. Simply connect GrowNET (RJ-45) cable to fertigator and connect manifold plumbing.

Specifications

• (8) Zone Valves
• Max 22 gpm, 150psi
• 1" Manifold & Valves with NPT Connections
• Stainless Steel Back Panel
• Made in USA

*Please note we can only ship RKI products to customers within the United States

Part Number: 58L-154-0.75

Part Number: 34L-471

SX811-SS Portable pH Meter for Food and Dairy Products, Equipped with LanSen Food-Grade Stainless Steel Anti-Contamination Spear Probe by Apera

The Apera Instruments SX811-SS portable food pH meter is a perfect combination of the most advanced digital processing technology, software design, and electrochemical sensor technology, specially designed for the pH measurement of food (meat, cheese, dairy products, fruit, etc.) and other semi-solids (such as soil). Its LabSen spear electrode adopts durable food grade stainless steel sheath, solid electrolyte, and long-life reference electrode, making the probe hard to be contaminated and maintenance-free. The meter has a ±0.01 pH accuracy in a range of -2.00-19.99 pH., with 0-100°C Automatic Temperature Compensation (ATC), Auto Calibration with auto recognition of up to 12 kinds of buffer solutions, and supports stable reading/auto-hold display mode. The meter's digital filter technology improves response time and accuracy. Intelligent Functions: Smart Self Diagnosis of out-of-range measurement, incorrect calibration, and electrode invalidation warning. Other functions include calibration reminders, calibration date checking, easy parameter setting. Data Processing: GLP standard data management, 500 data sets of storage, manual/auto timing storage, USB charging and data output, data protection in case of power outage. Reliable Structure Design: White backlit large LCD, foldable stand allows use as a benchtop meter, soft silicon case gives you a good grip, connector protection cap, IP57 waterproof, battery and/or USB power supply. The meter meets ISO 9001:2008 standards and comes with a 2-year warranty.

• Equipped with LabSen spear electrode (Swiss technology), designed for professional food/semi-solids pH measurement, hard to be contaminated and maintenance-free
• Accurate Measurement: Accuracy: ±0.01 pH, Range: -2.00-19.99 pH, ATC, Auto Calibration, Advanced digital processing technology, supports stable reading/auto-hold display mode
• Intelligent Functions: Self-Diagnosis of out-of-range value and electrode invalidation, calibration reminders, calibration date checking, easy parameter setting
• Data Processing: GLP standard data management, 500 data sets of storage, manual/auto timing storage, USB charging and data output, data protection in case of power outage
• Reliable Structure Design: White backlit large LCD, foldable stand allows use as a benchtop, soft silicon case gives you a nice grip, IP57 waterproof, battery and/or USB power supply

GHS1239 Gloves PPE Hazard Class Pictogram Label (1/2"), 1820/Pad by GHS Safety

Provide your employees with a quick and easy way to identify Personal Protective Equipment & Hazard Class requirements. GHS labels are manufactured on a high gloss paper stock with pressure sensitive adhesive for ease of application and longer durability. Designed to be used with you in house labeling system where color printing isn't an option.

Make clean, professional looking labels in minutes. Labels are printed in sheets and padded with a cardboard backer for ease of use. Each sheet is perforated to allow removal when completed.

Labels are sold in pads. 1" diameter labels come 1,120 labels per pad. 1/2" diameter labels come 1,820 per pad.