All Products

72-6XYX-A GX-6000 One Sensor Sample Draw Gas Monitor, VOC(11.7 ev), with alkaline battery pack by RKI Instruments

Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Features

• Monitor up to 6 gases
• 2 smart sensor slots auto recognize PID, IR, and super toxic sensors
• 5 Operating modes: normal, leak check, inert, snap log and bar hole
• Library of over 600 VOCs
• PPM Leak Check mode
• Man-down and panic alarms
• Auto display rotation
• LED Light source
• Internal sample pump
• Glove friendly glow in the dark buttons
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs Li-ion / alkaline
• Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours
• Field replaceable sensors, batteries and filters

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

ZD22-702-D ZD 22 Fixed Gas Transmitter with Oxygen (O2) MK 435-1, 0 - 2% vol., Display / 4-20 mA by GfG

Superior technology

The ZD 22 Transmitter is specifically designed for long-term monitoring of oxygen concentrations. The integrated amperometric oxygen sensor is based on an electrochemical oxygen pumping cell made of zirconium dioxide. It is characterized by its robustness, a very high life expectancy and its outstanding long-term stability. The integrated thermostatic control of the sensor element achieves accurate measuring results in the entire temperature range, regardless of the operating temperature. It can also be permanently used in environments with high concentrations of CO2 or in dry atmosphere. Special equipment is available to protect the transmitter when used in harsh environments.

Signal processing

The protective casing (IP 54) of the ZD 22 Transmitter contains the complete signal processing electronics and the failsafe routing of the measurement signal for the measuring computer, with extensive self-monitoring. The embedded software linearises the measuring signal and compensates for the effects of temperature. As a result, correct readings are transmitted even with weather related fluctuations in temperature. In addition, the transmitter can be connected to a gas measurement computer for the option of transmitting service, maintenance, and error messages.

Universal signal transmission

The ZD 22 Transmitter transmits the signals either using an analog (0.2 1mA / 4-20 mA) current interface or a digital (RS485) Modbus interface. This permits the universal use of the trasmitters in combination with GfG gas measurement computers and thus connection to a safety system, so that you and your systems will benefit from the best possible protection.

There are a variety of applications for the ZD 22 in regard to sensors, status LEDs and optional analog or digital interface, "Zero" key to calibrate the zero point, test socket and a potentiometer for the calibration of the sensor.

Weather protection

A weatherproof housing not only protects transmitters against exposure to wind and weather, but also against contamination and excessive temperatures caused by direct sunlight.

Optional colored graphic display

The clear graphic display of the ZD 22 is self explanatory and allows you to read the current status and other important information with ease. The display enables you to navigate effortlessly through the unit s concise menu and to change settings or even calibrate, depending on your user authorization. In the event of an alarm the display changes color from green to red. Two LEDs indicate the status.

Operation buttons

The buttons on the transmitter allow the unit to be calibrated and settings to be adjusted through the menu as needed.

Calibration adapter

In order to perform a calibration, a calibration adapter is used on the transmitter, which ensures a uniform and secure supply of gas.

Easy and convenient service

GfG offers full after-the-sale commissioning and field service support.

• Long service life of the sensors
• Extremely fast response time: t90 < 5 sec.
• Reduced pressure, humidity, or temperature influence
• No damage due to CO₂
• Cost effective single-man adjustment
• Affordable operation costs

BU5004-G Buffer, pH 4.00 ± 0.01 at 25°C, 4L by AquaPhoenix

pH Buffer should be used regularly, typically every day the meter is used to calibrate your pH meters. Pour buffer into a clean separate container and never return used or unused buffer back into the container. Always keep tightly capped and adhere to the expiration date which is printed on the label.

Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 4 L
• pH Value: 4.0 (color coded red)

1324-0015 IR-148 Infrared Gas Monitor, Single Point, CO (0-1000 ppm) by Honeywell Analytics

The Model IR-148 is an infrared gas monitor that detects toxic and combustible gases as well as solvents. It uses infrared sensing technology, allowing accurate measurement of target gas vapors with minimum interference from other vapors. The Model IR-148 is supplied as a wall mount unit configured for 1, 4 or 8 sampling points measuring down to 1 part per million (ppm). It has two available analog outputs, each which is software selectable between 10% and 100% of full scale: 4-20mA, isolated, current sourcing, and 0-10 VDC. Multiple gas calibrations are available.

Additional Features and Benefits:

• Infrared sensing technology
• Accurate measurement of target gas vapors with minimum interference
• Optional relay module can be configured for 1, 2 or 3 alarm levels
• 4-20mA

Quick Specs:

• Response: Updated reading every 7 seconds
• Operating temperature: 0-50°C, 32-122°F
• Relative humidity: 0-99% non-condensing (no effect on reading)

2811-731-003 EC 28 Gas Transmitter with Sensor, Sulfur Dioxide (SO2), Display / Alarm by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG s proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

91210-05 Traceable Thermocouple Thermometer with Memory and Calibration by Digi-Sense

Thermometer temperature range covers -328 to 2498°F and -200 to 1370°C. Resolution is 0.1 from -200 to 640°C (-328 to 990°F) otherwise 1°. Meter only accuracy is ±1°C.

Supplied stainless-steel, triple-purpose, Type-K thermocouple probe may be used to measure temperatures of liquids, air/gas, and semisolids. Large, 1/2-inch-high LCD is easy to read. Thermometer accepts any Type-K probe. Minimum and maximum readings may be recalled instantly. Unit features backlit display so that answers may be read in poor lighting - even total darkness. Computer output allows thermometer to be connected to a computer or data logger for capturing and storing readings. Count-up timer provides a relative time measurement while taking temperatures and recording MIN/MAX.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Key Features

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Reads °F or °C at the touch of a button
• Max/min temperature memory
• Uses all Type K probes
• Size is 2-3/4 x 7 x 1-1/4 inches
• Weight is 6-1/2 ounces

Includes

Type-K stainless-steel thermocouple probe, 9-volt battery, and NIST-traceable calibration certificate with data.

600-0061-001 Oxygen, 19% (Balance Nitrogen), 34L Steel Cylinder by RAE Systems

Standard single-gas and multi-gas mixtures for monitor calibration

• Sizes range from 11 liters to 103 liters
• Convenient multi-gas mixtures
• Choose between demand-flow and constant-flow regulators

98767-17 Traceable Memory-Loc™ Thermohygrometer with Barometer and Calibration by Digi-Sense

Easily monitor the conditions in manufacturing, labs, and storerooms using the data logging thermohygrometer or barometer. Memory capacity is 2 years when set to 2-minute intervals, longer when set to larger intervals. Each device has a unique ID allowing multiple units to be used in the same location. Easily transfer data recorded in a CSV format to any computer via a USB flash drive - no software is required. The data on each unit cannot be overwritten or modified, reliably securing information that should not be deleted.

Alarm tracking feature stores each alarm event detailing which high or low alarm state occurred, when the alarm state occurred, as well as when the condition returned to normal range. Alarm state indicator includes audio alerts and flashing LCD segments. Other status indicators include low-battery, memory full, and USB data transfer.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Humidity (inside) is for the measuring range for the meter; humidity (outside) is for the probe.

Barometric pressure is measured in mbar (mmHg) only. Measuring range is from 500 to 1030 mbar.

Altitude compensation is in meters only. Measuring range is -100 to 2500 m in 10 m interval.

Kea Features

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Store up to 30 unique alarm events
• Smart-Alarm™ with visual/audible alarm continues to alert even if the unit returns to nonalarm conditions
• Adjustable sampling rate - from 1 min to 12 hrs in 1 min steps
• Permanently stores 819,150 barometric pressure, humidity, and temperature readings
• Altitude compensation from -100 to 2500 meters
• Set HI/LO alarms for barometric pressure, temperature, and RH

Includes

Built-in stand, hook-and-loop strip, magnetic backing strip, wall mount, three AAA batteries, and NIST-traceable calibration certificate with data.

94306 PowerSeeker Accessory Kit by Celestron

• This economical seven-piece accessory kit enhances the performance of your Celestron PowerSeeker, or most any other telescope.
• Includes two full-size 1.25" eyepieces, three eyepiece filters, a cleaning cloth, and a case.
• One medium power & one high power eyepiece give you a new perspective on celestial objects.
• A Moon filter helps block out some moonlight so you can see more lunar detail, and the two color filters (Red & Blue) highlight features on Mars, Jupiter, and Saturn.
• A hard plastic carry case keeps everything safe in the foam-lined interior.

The Celestron PowerSeeker Accessory Kit is a great way to expand the enjoyment of your telescope. Inside the plastic, foam-lined carry case you'll find these accessories:

• 15 mm Kellner Eyepiece - 1.25"
• 9 mm Kellner Eyepiece - 1.25"
• #80A Blue Filter - 1.25"
• #25 Red Filter - 1.25"
• Moon Filter - 1.25"
• Microfiber Cleaning Cloth

Eyepieces - The 15 mm and 9 mm eyepieces can be used in any telescope with a 1.25" focuser. Each eyepiece is fully coated to improve light transmission and protect the optics. The 15 mm Kellner eyepiece offers a nice medium magnification view in most telescopes, and the 9 mm provides high magnifications, great for the Moon and planets, especially when seeing conditions are good.

Filters - Colored filters can be used to bring out certain details on a planet's surface or its cloud structure. Both planetary filters, as well as the Moon filter, can be used on any 1.25" eyepiece with the proper filter threads, so they are very versatile. Just screw one onto your eyepiece of choice and slide it into the focuser.

• The #80A is a medium-blue filter that enhances the contrast of the cloud belts on Jupiter and the polar ice caps on Saturn. It also can be used to increase contrast on the Moon if you don't mind the color shift.
• The #25 filter is a deep red color and is a good choice when you want to define the polar ice caps on Mars. It's also fun to use this filter when observing Jupiter. The #25 Red filter blocks quite a bit of light coming through your telescope, however, so it is best used on bright objects with larger aperture telescopes.
• The Moon filter is one of the first accessories most new amateur astronomers buy, and for good reason! It helps block out a portion of the light the Moon sends into your eyepiece so that you can see details better. You can also try this filter on Venus; it helps you see which phase she's in.

Cleaning Cloth & Case - Keep the microfiber cleaning cloth stashed in your PowerSeeker Accessory Kit case so that it will always be handy. It's better to use a microfiber cloth on your optics than wipes or tissue, as it will not leave a residue, and can be reused. Remember to blow or brush any dust particles off of your optics before rubbing them with the cloth.

The black plastic carry case has die-cut foam inside to protect and cushion your accessories. Keep each one in its appointed place when not in use and you ll keep them looking and performing like new.

If you'd like an accessory kit that includes a 2x Barlow lens, take a look at the AstroMaster Accessory Kit, #94307.

2801-27-001 CC 28 Fixed Gas Transmitter with Gas Optimized Catalytic Sensor 0-100% LEL (MK 208-1), Cyclohexane (C6H12), No Display by GfG

Superior technology

In areas where combustible gas or vapor hazards may exist, GfG s new CC 28 combustible transmitter is the perfect choice for reliable area monitoring. With its proven design, this ATEX certified transmitter offers an integrated explosion-proof buzzer and bright-alarm LEDs for reliable warning of combustible gas hazards (even in hazardous locations). This superior design provides warnings for immediate personnel, and ensures entire plant safety.

Easy handling

Smart sensor technology allows easy installation. Sensor replacement takes only a few seconds-simply plug in the sensor. User adjustments are performed at the transmitter with simple touch keys, or with the optional remote control interface (one person calibration).

RC2 remote control

Several combustible gases are lighter than air. With the transmitter mounted close to the ceiling, calibration can be difficult. The remote control for the CC 28 allows you to perform calibration or zero adjustments without the need of a ladder or lift. A flexible cable connects the remote control to the transmitter and displays the same reading as the display on the transmitter. With the remote control inspection,service and calibration can be performed easily by one person.

The sensor and the integrated temperature compensation provide highest measurement accuracy.

Low maintenance requirements and long sensor life reduce your cost of ownership. Just sign a service contract and don t worry about any problems. We will service your system at regular intervals.

Models

Model CC 28D allows you to read the gas concentration both at the transmitter and at the GMA controller.With the RC2 remote control - the CC 28 is easy to use and to operate even if it is mounted at the ceiling.

Model CC 28DA provides additional warning with bright integrated alarm LEDs and a buzzer.

Features

• Full-featured smart transmitter for combustible gas measurement
• Non-intrusive calibration adjustment
• Expected sensor life of 5 years
• Increased safety design to reduce installation cost in potentially hazardous locations
• ATEX EEx dem [1b] IIC T4
• Proprietary, high performance combustible gas sensor
• Available in three configurations: Blind (no display), Display, Display with local alarms

Advantages at a glance

• Display of gas concentration at transmitter or remote control
• ATEX II G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need of expensive EX-proof buzzer or wiring
• Easy sensor replacement with plug-in sensors
• Long life sensor
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments by means of touch keys or remote control without opening the casing
• Easy handling even at hard-to-reach accessible transmitter positions.

PH850-BR Portable pH Meter Kit for Beverage Making by Apera

The Apera Instruments PH850-BR Portable pH Meter is designed for professional pH measurement of for brewing, such as beer, wine, kombucha, juice, etc. The equipped LabSen® 213 3-in-1 Glass pH/Temperature Electrode adopts a Long-Life reference system, and a patented pH/temp. dual sensor structure, making precise beverage pH measurement easier than ever. It's also working well in high-temperature samples (up to 212°F), so you don't have to wait for the beverage samples to cool down. The unique LabSen blue hemispheric glass membrane has a faster response rate, better repeatability, and built tough - highly resistant to general impact (totally differentiates from the fragile conventional glass bulb membrane).

This PH850-BR Portable pH Meter for brewing has a ±0.01 pH accuracy in a range of 0-14 pH, and Temperature Range: -5 to 100°C(23 to 212°F), Auto Calibration with auto-recognition of up to 12 kinds of buffer solutions, Auto. Temp. Compensation, and supports stable reading/auto-hold display mode. The meter's digital filter technology improves response time and accuracy.

Intelligent Functions: Smart Self Diagnosis reminds of out-of-range measurement, incorrect calibration, and electrode invalidation. Other functions include auto. calibration, auto. lock, easy parameter setting, pH electrode's slope display, auto. power off, etc.

Reliable Structure Design: foldable stand allows use as a benchtop meter; soft silicone case gives you a nice firm grip; connector protection cap, IP57 waterproof rating; Powered by 3 AA batteries. The meter is RoHS and CE certified and comes with a 2-year warranty (6 months for the electrode).

• Equipped with the LabSen® 213 Glass 3-in-1 pH/Temperature Electrode, designed for professional quality control of beverage making (beer, wine, juice, kombucha, etc.), works well under high temperature (up to 212°F)
• Intelligent Functions: Self-Diagnosis of out-of-range value and electrode invalidation, auto. calibration, electrode slope display, Auto. power-off, easy parameter setting
• Ragged Structure Design: IP57 waterproof rating; Soft silicon case gives you a firm and comfortable grip
• Powered by AAA batteries; the foldable stand also allows use as a benchtop meter

Mi105 pH / Temperature Professional Portable Meter by Milwaukee

The included electrode has a built-in temperature sensor and amplifier to prevent electrical interference. The large display shows readings in an extended range from -2.00 to 16.00 pH and simultaneously shows temperature from -5.0 to 105.0°C or 23 to 221°F.

The Mi105 has a stability indicator and hold feature that freezes the display for easy and accurate recording. The large display also has graphic symbols to guide you through all operations. The battery life of the meters guarantees over 500 hours of continuous use. When switched ON it performs a self-check and displays the percentage of the remaining battery level to assure proper working condition. Calibration is performed automatically at 1 or 2 points using standard or NIST buffers.

Sperian Biosystems PhD6 Multigas Detector

The Biosystems PhD6 Multigas Detector is the latest development in compact multigas detection systems. The detector is proven to be compact, efficient, and cost effective. With dual alarm systems featuring ultra-loud audible indicators and ultra-bright LED visual indicators, users and those nearby are always notified when potential hazards may be present. When developing this detector, the engineers at SperianProtection Instrumentation also developed an express docking station that would reduce calibration time and labor costs. The detection and docking station help users meet record keeping requirements and reduce the risks of human error. With the SperianBiosystems PhD6 Multigas Detector, users can rest assured that they are receiving the very best in gas detection technology.

Key Features

The Biosystems PhD6 Multigas Detector is compatible with over 19 sensor choices including:

• PID
• IR-CO2
• IR-CH4
• Conventional LEL
• Oxygen
• 15 different toxic gas sensors

The gas detector is encased in a durable solid polycarbonate case with a rubber over mold for easy handling. It has an interchangeable battery pack with both Alkaline and Li-Ion rechargeable batteries. Both battery types offer up to 24 hour run times. The unit features dual audible alarms at 92 decibels and front and side ultra-bright LED visual alarms to ensure that the user and those nearby are always notified of possible hazardous conditions. For easy interpretation, the detector has an easy to read status bar and large LCD display that notifies users of the device s functionality and calibration due date. Using the menu options, users can easily adjust a variety of the instrument s settings.

Automatic Docking Station

When developing the PhD6 Multigas Detector, product developers also created an automatic docking station (Biosystems IQ6 Express Dock) to be fully compatible with the detector. The docking station aims to reduce labor time and costs by fully automating certain aspects of instrument maintenance including calibration, functionality testing, and record keeping. Using the Express Dock, users can maintain compliance with recordkeeping requirements by simply docking the detector in the station. The station will automatically perform a variety of operations without user intervention.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation is a global leader in personal safety equipment. The company was recently acquired by Honeywell, another global leader in technology and innovation. As a Fortune 100 company, Honeywell has a vested interest in maintaining its reputation as a developer of efficient and reliable safety equipment. Sperian Protection Instrumentation helps to expand Honeywell s personal safety offerings while advancing their position in the American market. By purchasing a product by Sperian and Honeywell, customers can be assured they are receiving the very best in safety technology and equipment.

*Please note we can only ship RKI products to customers within the United States