All Products

58-036-1M RG58/U, BNC Male to BNC Male, 36 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

GHS1207 Workplace Thermal Transfer Labels, Red Border (8" x 8") by GHS Safety

Need an open format label for your HazCom GHS requirements? Try generic HazCom GHS label system. Labels are Thermal Transfer paper with a permanent adhesive and can be hand printed or used in any standard Thermal Transfer printer. Use any standard desktop publishing package to quickly make your own Professional looking labels.

Enhance the label with Hazard Class and Personal Protective Equipment labels (sold separately).

Labels sold by the roll. 250 labels per roll

Part Number: 221L-331

*Please note we can only ship RKI products to customers within the United States

0632 1551 CO2 Probe with Bluetooth, includes Temperature and Humidity Sensor by Testo

Use the probe with the compatible testo multifunction measuring instrument (please order separately) to determine CO₂ concentration, air humidity and air temperature. Wet bulb temperature, dew point and absolute humidity are calculated at the same time.

CO₂ probe with Bluetooth including temperature and humidity sensor - features

Use the probe to check the indoor climate, for example in offices, production areas or storage facilities. To ensure accurate measurement results, air density compensation is carried out via the integrated absolute pressure measurement.

The readings of the CO₂ probe are transmitted to your measuring instrument via Bluetooth, up to a distance of 20 m.

Particularly useful: store individual readings directly in the measuring instrument by pressing the button on the probe. The clearly structured measurement menu for long-term measurement enables the measuring instrument to be operated intuitively. Reading trends are reliably recorded thanks to the convenient input of measurement time and measuring cycle. You can use these trends to evaluate changes in the indoor air quality.

Wireless and space-saving: more applications, less equipment

Endlessly versatile: a universal handle can be connected to all probe heads - so you can master more applications using less equipment and save space. The Bluetooth handle makes it more convenient to carry out your measurement and guarantees less cable clutter in the case.

Or order the cable handle to connect testo probe heads. This is an advantage if Bluetooth signals are not permitted. If the sensors (CO₂, humidity, temperature) need to be replaced in the distant future, you can change the probe head.

Intelligent calibration concept

You will get exceptionally accurate measurement results with the digital probe, because the measuring instrument makes measurement uncertainty a thing of the past. You only need to send the probe head in for calibration - so the measuring instrument remains in continuous use.

Areas of application for the CO₂ probe with Bluetooth

Use the CO₂ probe including temperature and humidity sensor to check the indoor climate (indoor air quality), e.g. in offices, production areas or storage facilities.

The CO₂ concentration is a primary indicator of indoor air quality. Poor air quality due to excessive CO₂ concentration results in tiredness and lack of concentration, and can even cause illnesses. The CO₂ concentration should therefore not normally exceed 1,000 ppm.

• Intuitive: clearly structured measurement menu for long-term measurement and parallel determination of CO₂ concentration, humidity and air temperature in indoor areas
• Precise: calculation of wet bulb temperature, dew point and absolute humidity
• Convenient: Bluetooth connection between measuring instrument and probe, a universal handle can easily be combined with other probe heads
• Intelligent calibration concept

Includes:

CO₂ probe with Bluetooth including temperature and humidity sensor (consisting of CO₂ probe head and Bluetooth handle); 4 x AA batteries, table stand and calibration protocol.

Sperian Biosystems PhD6 Multigas Detector

The Biosystems PhD6 Multigas Detector is the latest development in compact multigas detection systems. The detector is proven to be compact, efficient, and cost effective. With dual alarm systems featuring ultra-loud audible indicators and ultra-bright LED visual indicators, users and those nearby are always notified when potential hazards may be present. When developing this detector, the engineers at SperianProtection Instrumentation also developed an express docking station that would reduce calibration time and labor costs. The detection and docking station help users meet record keeping requirements and reduce the risks of human error. With the SperianBiosystems PhD6 Multigas Detector, users can rest assured that they are receiving the very best in gas detection technology.

Key Features

The Biosystems PhD6 Multigas Detector is compatible with over 19 sensor choices including:

• PID
• IR-CO2
• IR-CH4
• Conventional LEL
• Oxygen
• 15 different toxic gas sensors

The gas detector is encased in a durable solid polycarbonate case with a rubber over mold for easy handling. It has an interchangeable battery pack with both Alkaline and Li-Ion rechargeable batteries. Both battery types offer up to 24 hour run times. The unit features dual audible alarms at 92 decibels and front and side ultra-bright LED visual alarms to ensure that the user and those nearby are always notified of possible hazardous conditions. For easy interpretation, the detector has an easy to read status bar and large LCD display that notifies users of the device s functionality and calibration due date. Using the menu options, users can easily adjust a variety of the instrument s settings.

Automatic Docking Station

When developing the PhD6 Multigas Detector, product developers also created an automatic docking station (Biosystems IQ6 Express Dock) to be fully compatible with the detector. The docking station aims to reduce labor time and costs by fully automating certain aspects of instrument maintenance including calibration, functionality testing, and record keeping. Using the Express Dock, users can maintain compliance with recordkeeping requirements by simply docking the detector in the station. The station will automatically perform a variety of operations without user intervention.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation is a global leader in personal safety equipment. The company was recently acquired by Honeywell, another global leader in technology and innovation. As a Fortune 100 company, Honeywell has a vested interest in maintaining its reputation as a developer of efficient and reliable safety equipment. Sperian Protection Instrumentation helps to expand Honeywell s personal safety offerings while advancing their position in the American market. By purchasing a product by Sperian and Honeywell, customers can be assured they are receiving the very best in safety technology and equipment.

*Please note we can only ship RKI products to customers within the United States

72-2102-06 Beacon 200 Two Channel Wall Mount Controller with 24 VDC Strobe / Horn for Common Alarm 1 Operation, LEL Detectors on 100 ft Cables by RKI Instruments

RKI Instruments is an industry leader in gas monitoring and detection devices. Understanding the unique needs of hazardous workplace conditions, RKI Instruments offers the widest selection of standard and toxic gas detection sensors. With an emphasis on reliability and dependency, their products are some of the safest and most dependable gas monitors on the market. In researching workplace safety solutions, RKI's research and development team used the latest microprocessor technology to develop the Two Channel Wall Mount Controller Beacon 200 Model, a gas detection system designed with the everyday hazards of dangerous work environments in mind.

Two Channel Wall Mount Controller

The Two Channel Wall Mount Controller Beacon 200 Model utilizes microprocessors and state of the art technology to ensure accurate gas detection and alert those nearby of atmospheric conditions. The unit is affordable, versatile, user-friendly, and easy to install. This model connects directly to long lasting RKI sensors for LEL level combustible gases, oxygen, and toxic gases. These sensors may be connected directly to the unit or may be wired remotely.

Two Channel Wall Mount Controller Beacon 200 Model Features

The unit features simultaneous atmospheric condition readout on 2 channels with 2 alarm levels per channel and a built in audible alarm system. The unit also houses 4-20 mA outputs and accepts any 4-20 mA transmitter input (24 VDC). The unit can also be wired with a variety of RKI Instrument sensors.

The Two Channel Wall Mount Controller Beacon 200 Model is housed in a wall mounting grey polycarbonate casing with a hinged cover. The NEMA 4X enclosure is waterproof, chemical resistant, and weather resistant ensuring maximum protection against potential environmental hazards that could damage safety equipment. It is user-friendly with 4 push buttons for setup, programming, and calibration. The unit also features 1 external push button for alarm reset.

The alarm system features an audible and visual alert system. The built-in audible alarm uses a 94 dB alert system, and the visual alerts feature 4 ultra-bright LED lights on the front cover. The alarms will alert users about potentially dangerous atmospheric conditions in addition to potential unit malfunctions.

Beacon 200 Model Specifications

The Two Channel Wall Mount Controller Beacon 200 Model features a backlit alphanumeric display that is easy to read and practical with 20 characters per line and a 4 line capacity. The wall mounted controller is approximately 10.5 H x 8.5 W x 6.3 D and is powered by 115 VAC or 24 VDC standard with an optional 230 VAC and an available battery backup option. The Two Channel Wall Mount Controller Beacon 200 Model is CSA Certified and comes standard with a 1 year warranty for materials and workmanship.

*Please note we can only ship RKI products to customers within the United States

MW801 Standard Portable pH / Conductivity / TDS Combination Meter by Milwaukee

3 meters in 1! This meter allows you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe!

The MW801 with a Conductivity range that goes up to 1990 µS/cm and TDS range that goes up to 1990 ppm is an ideal tool for drinking water measurements.

Supplied with the SE600 interchangeable probe to measure pH, Conductivity and TDS. The pH electrode utilizes a fiber junction to reduce contamination when measuring fertilizer solutions. Both meters calibrate manually in pH, Conductivity and TDS.

Part Number: 44L-437

Part Number: 10L-383S

6401-0509 MGS-250 Infrared R422A Detector by Bacharach

Bacharach's new MGS-250 Infrared Refrigerant Gas Transmitter is the leader in performance and flexibility at an economical price. There are two versions available - a cost-effective broadband sensor used for gross leak detection or gas-particular versions that are even more distinct, pre-calibrated and characterized for response to specific refrigerants. Its simple-to-use interface gives the user the ability to set all parameters and outputs without opening the unit, moving jumpers, using mulitmeters or adjusting potentiometers.

The MGS-250 family is a cost effective solution for detecting a variety of refrigerants without the limitations posed by solid-state sensor technologies. The long-life, proprietary NDIR infrared sensor allows for accurate low-level leak detection (0-3,500 ppm), delivering up to 5-7 years of maintenance-free operation without the need for costly annual gas calibrations. Infrared sensing technology makes the MGS-250 immune to cross sensitivities to combustible and toxic gas as well as changes in temperature and humidity. The unit has an alpha-numeric LED display to show constant real-time readings, an on-board LED indicator for when the sensor is in an alarm state, and an audible alarm to alert personnel in the area that levels have exceeded the desired limit. An optional protective splash guard is available for use in areas with high water spray such as food and beverage facilities or chiller rooms.

Features & Benefits:

• Long-life, Non-Dispersive Infrared (NDIR) sensor allows for accurate low-level leak detection
• Detects all refrigerants (CFC, HFCs, HCFC, HFO's), including HFO1234YF, HFO1234ZE, R410a & R22
• Fast-responding, refrigerant-specific sensor with no cross interferences to other gases
• No field calibrations required
• Modbus RTU interface to connect to BAS/BMS systems and on-board alarm relay
• User selectable analog output: 4-20 mA, 0-5V, 1-5V, 0-10V, 2-10V
• Bright, alpha-numeric LED real-time display with on-board audible and visual alarms

*Please note we can only ship RKI products to customers within the United States

35-3000RKA-IR03 IR Methane 100% Vol, Sample Draw Assembly in NEMA 4X Enclosure with Transmitter by RKI Instruments

The 35-3000RK series is a compact sample draw detector assembly with a built-in pump that accepts a 24VDC input. This unit features a NEMA 4X enclosure making it dust, water and corrosion resistant. It also features a flowmeter with adjustable flow and a low flow alarm which warns of any obstructions or restrictions in the flow system. Combustibles, oxygen, hydrogen sulfide and carbon monoxide versions are available with or without a 4-20 mA transmitter. The 35-3000RK is also available with both LEL and oxygen sensors in one unit.

The 35-3000RK is capable of single person calibrations and remote sampling at up to 5,000 ft. from a controller, and interfacing to any RKI or third party control system (utilizing a 4-20 mA feedback signal). Multigas versions of this efficient sample draw system are available with up to four sensors, LEL, O2, H2S and CO all in one enclosure. This is a very cost effective way of monitoring for several gases that may be in the same place.

Features

• NEMA 4X enclosure
• Long life pump
• Flowmeter and LED's for operational status
• Low flow indication
• Operates on 24VDC input
• Multigas versions available with up to 4 sensor in one enclosure
• Available in LEL, O2, H2S, CO, H2, HC (ppm)
• LEL and O2 available with or without transmittter
• LEL and O2 available together in one standard compact enclosure

Industry Applications

• Petrochemical plants
• Refineries
• Water & wastewater treatment plants
• Pulp & paper mills
• Gas, telephone, & electric utilities
• Parking garages
• Manufacturing facilities
• Steel
• Automotive
• HVAC

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

3400S-4 4-Outlet "No-Air" 12V Abrasive Blast Light System with Power Box by Western Technology

The 3400 INCANDESCENT NO-AIR POLYURETHANE BLAST LIGHT is the perfect light for small areas where you need maximum maneuverability in small spaces, with battery clamp options you can guarantee this light will help you get the job done with ease. An all polyurethane construction with additional options available, this is a perfect choice for your blast lighting needs.

Features

• All polyurethane construction
• 120V AC/12V DC system includes power pack
• Also available in 220V
• Multi-outlet systems available
• Model 3400B may be connected directly to 12VDC battery; comes with battery clamps
• Additional options available

Sperian Biosystems PhD6 Multigas Detector

The Biosystems PhD6 Multigas Detector is the latest development in compact multigas detection systems. The detector is proven to be compact, efficient, and cost effective. With dual alarm systems featuring ultra-loud audible indicators and ultra-bright LED visual indicators, users and those nearby are always notified when potential hazards may be present. When developing this detector, the engineers at SperianProtection Instrumentation also developed an express docking station that would reduce calibration time and labor costs. The detection and docking station help users meet record keeping requirements and reduce the risks of human error. With the SperianBiosystems PhD6 Multigas Detector, users can rest assured that they are receiving the very best in gas detection technology.

Key Features

The Biosystems PhD6 Multigas Detector is compatible with over 19 sensor choices including:

• PID
• IR-CO2
• IR-CH4
• Conventional LEL
• Oxygen
• 15 different toxic gas sensors

The gas detector is encased in a durable solid polycarbonate case with a rubber over mold for easy handling. It has an interchangeable battery pack with both Alkaline and Li-Ion rechargeable batteries. Both battery types offer up to 24 hour run times. The unit features dual audible alarms at 92 decibels and front and side ultra-bright LED visual alarms to ensure that the user and those nearby are always notified of possible hazardous conditions. For easy interpretation, the detector has an easy to read status bar and large LCD display that notifies users of the device s functionality and calibration due date. Using the menu options, users can easily adjust a variety of the instrument s settings.

Automatic Docking Station

When developing the PhD6 Multigas Detector, product developers also created an automatic docking station (Biosystems IQ6 Express Dock) to be fully compatible with the detector. The docking station aims to reduce labor time and costs by fully automating certain aspects of instrument maintenance including calibration, functionality testing, and record keeping. Using the Express Dock, users can maintain compliance with recordkeeping requirements by simply docking the detector in the station. The station will automatically perform a variety of operations without user intervention.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation is a global leader in personal safety equipment. The company was recently acquired by Honeywell, another global leader in technology and innovation. As a Fortune 100 company, Honeywell has a vested interest in maintaining its reputation as a developer of efficient and reliable safety equipment. Sperian Protection Instrumentation helps to expand Honeywell s personal safety offerings while advancing their position in the American market. By purchasing a product by Sperian and Honeywell, customers can be assured they are receiving the very best in safety technology and equipment.

CC22-779-M CC 22 Series Fixed Transmitter with Aceton (C3H6O) Sensor, 0 - 100% LEL Range, No Display / Modbus by GfG

Are you looking for an innovative and cost-effective transmitter for combustible gases, but without the need for explosion protection? Then a GfG 22 series transmitter is the right choice.

Time-proven and innovative

The CC 22 works according to the heat of reaction principle, a proven method for measuring combustible gases. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow-up costs are minimized thanks to the long lifespan of the sensors.

Universal signal transmission

Either an analog or digital output signal can be transmitted by the CC 22 by means of a Modbus interface. Due to the different types of signal transmission, a 22 series transmitter can be connected to almost any gas detection system, also as an extra measuring point or as a replacement transmitter on existing systems.

Signal processing

The embedded software of the CC 22 linearises the measuring signal and compensates for the effects of temperature. As a result, correct readings are transmitted even with weather related fluctuations in temperature. The software allows problems to be detected, and the Modbus version also indicates any required service or maintenance work.

Weather protection

A weatherproof housing not only protects transmitters against exposure to wind and weather, but also against contamination and excessive temperatures caused by direct sunlight.

Optional colored graphic display

The clear graphic display of the CC 22 is self explanatory and allows you to read off the current status and other important information with ease. The display enables you to navigate effortlessly through the unit's concise menu and to change settings or even calibrate, depending on your user authorization. In the event of an alarm, the display will turn red.

Operation buttons

The buttons on the transmitter allow the unit to be calibrated and settings to be adjusted through the menu as needed.

The application areas of the dust and water-protected structure range from production and storage areas to disposal sites, biogas plants, mines and oil rigs.

Calibration adapter

In order to perform regular bump tests, a calibration adapter is used on the transmitter, which ensures a uniform and secure supply of gas.

Easy and convenient service

GfG offers full after-the-sale commissioning and field service support.

Features

• Uses the catalytic combustion principle
• Long service life of the sensors
• High efficiency and low follow-up costs
• Sturdy plastic housing (IP 54)
• Cost effective single-man adjustment
• Affordable solution for many measuring tasks