All Products

72-5265RK-04 Eagle Portable Monitor for H2S/CO2 (20% Volume) by RKI Instruments

The Eagle Portable Monitor can simultaneously detect up to 6 different gases. With over 400 gas monitoring configurations, the unit can detect a wide range of toxic gases. RKI Industries offers long life protection for workplace safety and hazardous jobsites. With a reputation for advanced engineering and state of the art technology, the RKI Industries' Eagle One to Six Gas Portable Monitor is an industry leader in accuracy and affordability.

Features

The Eagle One to Six Gas Portable Monitor is available with a wide variety of exclusive features. The unit is capable of PPM/LEL hydrocarbon detection and for environmental use, has a methane elimination switch. The dual hydrophobic filters (available on some models) ensure quality control. To preserve the integrity and safety of the device, the portable monitor also has an adjustment lockout switch to prevent tampering. For quick and easy testing, the monitor offers autocalibration and single gas calibration.

The Eagle is housed in an ergonomic RFI, EMI, chemical, and weather resistant polycarbonate and polyester enclosure. It can operate in the rain or in 2 inches of water without damage. It features an ergonomically designed top handle to ensure durability.

Accessories and Options

IR Sensors are available for CO2, % LEL CH4 or HC, and % volume CH4 or HC. Each unit also has datalogging capabilities for research, evaluation, and analysis of worksite atmospheres. The unit comes standard with several accessories including a shoulder strap, alkaline batteries, a hydrophobic probe, a 5 foot hose, and an internal hydrophobic filter with most models. Optional accessories can be purchased to fully customize the portable monitor to meet specific needs including a datalogging kit, remote alarms, dilution fitting, Ni-Cad batteries, battery chargers, continuous operation adapter, extra loud buzzer, extension probes, and large internal hydrophobic filter.

Specifications

The Eagle has a battery life of up to 30 hours of continuous operation with alkaline or Ni-cad capability and a sensor life of approximately 2 years. Its standard weight is approximately 5 pounds with dimensions of 10.5 L x 5.9 W x 7 H. The formidable long life pump (with a life of approximately 6,000 hours) reaches up to 125 feet in range with filters and has a low flow pump shut off and alarm. The unit has a response time of up to 30 seconds for most gases, and features a double alarm of audible alerts at 85 dB and visual alerts of dual high intensity LEDs and a flashing display screen.

The display screen is an easy to read 4 x 20 LCD readout. The backlit display sits at the top of the unit for full visibility, and displays the readings and statuses of 4 channels simultaneously.

The portable monitor is rated as intrinsically safe and has a standard 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

Part Number: 116L-112-100

SX811-SS Portable pH Meter for Food and Dairy Products, Equipped with LanSen Food-Grade Stainless Steel Anti-Contamination Spear Probe by Apera

The Apera Instruments SX811-SS portable food pH meter is a perfect combination of the most advanced digital processing technology, software design, and electrochemical sensor technology, specially designed for the pH measurement of food (meat, cheese, dairy products, fruit, etc.) and other semi-solids (such as soil). Its LabSen spear electrode adopts durable food grade stainless steel sheath, solid electrolyte, and long-life reference electrode, making the probe hard to be contaminated and maintenance-free. The meter has a ±0.01 pH accuracy in a range of -2.00-19.99 pH., with 0-100°C Automatic Temperature Compensation (ATC), Auto Calibration with auto recognition of up to 12 kinds of buffer solutions, and supports stable reading/auto-hold display mode. The meter's digital filter technology improves response time and accuracy. Intelligent Functions: Smart Self Diagnosis of out-of-range measurement, incorrect calibration, and electrode invalidation warning. Other functions include calibration reminders, calibration date checking, easy parameter setting. Data Processing: GLP standard data management, 500 data sets of storage, manual/auto timing storage, USB charging and data output, data protection in case of power outage. Reliable Structure Design: White backlit large LCD, foldable stand allows use as a benchtop meter, soft silicon case gives you a good grip, connector protection cap, IP57 waterproof, battery and/or USB power supply. The meter meets ISO 9001:2008 standards and comes with a 2-year warranty.

• Equipped with LabSen spear electrode (Swiss technology), designed for professional food/semi-solids pH measurement, hard to be contaminated and maintenance-free
• Accurate Measurement: Accuracy: ±0.01 pH, Range: -2.00-19.99 pH, ATC, Auto Calibration, Advanced digital processing technology, supports stable reading/auto-hold display mode
• Intelligent Functions: Self-Diagnosis of out-of-range value and electrode invalidation, calibration reminders, calibration date checking, easy parameter setting
• Data Processing: GLP standard data management, 500 data sets of storage, manual/auto timing storage, USB charging and data output, data protection in case of power outage
• Reliable Structure Design: White backlit large LCD, foldable stand allows use as a benchtop, soft silicon case gives you a nice grip, IP57 waterproof, battery and/or USB power supply

81-SDM6000-06 SDM-6000 Calibration Station for GX-6000, includes Particle Filter, Connection Brackets, Exhaust Tubing, USB Cable for PC, SD Card, USB SD Card Reader, Ethernet Cable, Single Unit AC Adapter, Demand Flow Regulator, Calibration Gas Tubing, 34AL Cylinder Isobutylene / Air, and Cylinder Holder by RKI Instruments

Stand Alone Station

Modular Design

Up to 10 calibration stations can also be connected to one PC for automated charging, calibration, bump testing and archiving of data. Even if instruments are turned off, automated routines will power up the instruments and run as scheduled. All data collected from the PC Controlled software can also be centralized in one network location accessible by anyone with the PC Controlled software with access to the network location.

Stand Alone Station Features

• Stand-alone station (no PC Required)
• Charge, calibrate, bump test, and alarm test
• Included software collects calibration, bump test, alarm history, and exposure date from instruments
• Automatically power instruments on / off for scheduled calibration
• Accepts GX-6000 with or without rubber boot

Modular Design

• Simultaneously bump / calibrate, charge, and collect data up to 10 instruments
• No tubing, adaptors or wires needed to connect
• One power source for all stations
• Configure GX-6000 parameters
• Centralize instrument data from multiple stations and locations to one network location
• Ethernet port for LAN connectivity
• Schedule automatic calibration / bump test
• Optional valve expansion module for up to six gas cylinders
• Optional battery operated printer

*Please note we can only ship RKI products to customers within the United States

SXL-1X Optical Liquid Sensor, WET-ON (Latching) by Agrowtek

Electronic optical liquid sensors are durable, have no moving parts and are easy to maintain. SXL sensors can detect fluid levels in tanks, flow in pipes, or leaks in drip pans when liquid touches the sensor tip. Wide voltage range and high current capacity makes the SXL sensor practical for TTL logic, industrial PLC or direct relay control applications. 1/4" NPT threading and removable wiring terminal block with pin-out cast into the hex head makes installation or replacement fast and simple. When the output is energized a red LED illuminates the sensor body giving a visual status indication. Available in 'wet-on' and 'dry-on' configurations, or PWM output for applications requiring error indication and failure monitoring. Other intelligent functions include "stable state" switching to detect splashing, one-second output debounce and error indication from infrared flooding.

Applications

• Water Tanks
• Coolant Reservoirs
• Hydraulic Fluid Reservoirs
• Warewash Equipment
• Irrigation Systems
• High & Low Level Detection
• Leak & Overflow Detection
• Flow Detection in Pipes
• Automatic Fill/Drain Level Control

8322750 X-am 5100 Single-Gas Detector without Sensors or Battery by Draeger

For manufacturing petrochemical products, aseptic packing, or handling of rocket fuel: the Draeger X-am 5100 portable single-gas detector ensures safe handling of HF, HCl, H₂O₂ or hydrazine – thanks to proven Draeger sensor technology and a device design which is perfectly customized to reactive gases.

YOUR ADVANTAGES AT A GLANCE

• Continuous, precise and reliable measurement
• A special device design with direct gas entry provides fast sensor response and precise measurement data by preventing gas adsorption on the device housing
• Lightweight and robust
• Slip-proof and compact design
• Triple alarm: visual (360°), audible (multi-tone), vibration
• Easy to use: two-button operation and user-friendly menus
• Highly resistant to impacts, vibrations and electromagnetic radiation
• Can be operated using replaceable alkaline batteries or a T4 NiMH rechargeable battery, which can be charged right in the device

Part Number: 103L-135A-1.5

Part Number: X1005200PN

T4-ZOCZ-FR T4 Personal Gas Monitor, 2 Gas - O2, CO, Alternate Alarm Levels / Certifications by Crowcon

T4 integrates innovative safety features and an intuitive, rugged design to provide advanced protection for those working in harsh environments. This portable multigas detector, which is exceptionally easy to use and service, protects against the four most prevalent gas hazards: carbon monoxide (CO), hydrogen sulphide (H₂S), flammable gases and oxygen (O₂) depletion.

Features

• TWA resume function - unique to T4, this innovative feature ensures toxic gas exposure is calculated accurately over an entire shift, even if T4 is switched off for a break or during travel to another site.
• 18 hour battery life - safely work multiple or longer shifts between charges, covered by the 18 hour battery life.
• Backlit display - large, clear display with backlight and option to flip the screen 180° for easy viewing while worn.
• Rugged design - with a thick anti-shock rubber casing and drop-tested to 13.1 feet on concrete, T4 provides dependable operation under the most demanding use.
• Water & dust-resistant to IP65 & IP67 - provides protection in the harshest environments.
• Dedicated sensors - one sensor for every gas ensures effective, fast and reliable detection.
• Positive safety indicator - a simple 'traffic light' status indicator which, at a glance, provides visual assurance of operational and compliance status to both users and supervisors. Green light - Working safely. Red light - Attention required
• Intrinsically safe - ATEX approved and UL Class 1 Div 1 for safe operation in a wide range of hazardous environments.
• Multiple alarms - audible 95dB alarm, bright red/blue LED's and vibrating alerts provide effective warning to gas hazards.
• Easy operation - large single button and intuitive menu system minimize training and allow easy operation while wearing gloves.

SPLIN1BMXYMAZZ Sensepoint XRL Fixed Point Gas Leak Detector, Bluetooth, ATEX, NO2 20.0ppm, Modbus, Yellow by Honeywell Analytics

Sensepoint XRL is a fixed point gas leak detector that is designed to meet the needs of industrial applications. With over 50 years experience in gas leak detection, Honeywell offers a flexible range of highly-reliable sensing devices to meet those needs.

• Quick installation
• Rapid configuration
• Simple to operate
• Straightforward to maintain

Honeywell innovation enables customers to pair the gas detector with their mobile phone, and then use an app to perform many tasks related to installation, commissioning and maintenance.

Flexible Output Options

Sensepoint XRL is available with either mA loop analog output or Modbus RTU. The result is a flexible solution that can easily be incorporated into legacy systems as well as new installations.

Easy Control and Maintenance

Sensepoint XRL's smartphone interface makes for much faster calibration, configuration and bump tests. Inspecting the status and settings of individual Sensepoint XRL detectors is simple. Use the mobile app to:

• Read gas concentrations in real-time
• Reconfigure settings
• Check unit histories

Automated Reporting

Increase the efficiency of your operations and reduce administration time. The app and Sensepoint XRL provides easy access to diagnostic information and generates calibration reports at the touch of a screen.

Compatible System Controller

Touchpoint Plus is the perfect complement to Sensepoint XRL, providing an intuitive, easy to operate gas detection solution to meet the needs of your business.

Visual Integration

Clean aesthetics and a choice of colors mean that the detector appearance can be selected to compare or contrast with the environment in which it is being used.

Typical Applications

• Manufacturing facilities and factories
• Water treatment plants
• Battery charging facilities
• Vehicle test facilities
• Petrochemical plants
• Fuelling depots

Accessories

• Calibration cap
• Collecting cone
• Pole Mount Bracket Kit
• Duct Mount Kit
• Weather Protection
• Flow Housing

FEATURES & BENEFITS

• Choose from a range of mA or Modbus output versions for flexible system design to meet the customers requirements.
• Selectable source or sink current for analog output enables one detector to be suitable for both system configurations.
• The ingress protection of NEMA 4X/IP66 allows units to be installed in outdoor environemtns.
• Simplified maintenance with familiar smartphone technology saves money and time.
• Multi-color visual indicator to show status makes it easier to know the detector status immediately and identify detectors that require attention or are warning of danger.
• Manage the detector without making a physical connection. Remove the need for physical access to hard-to-reach devices.
• One person calibration without the need to open the detector. Saves time and removes need for hot work permit.

SCT-108.002.71 SCT WIND Infrared Thermometer (High Temperature 999°C) by ScichemTech

Includes:

• 9V DC Battery
• Instruction Manual
• Carrying Case

Features:

• A complete portable SCT meter for non contact temperature measurements.
• Temperature range: -50°C to 999°C
• Fixed emissivity @ 0.95
• Ultra low power consumption in shutdown mode.
• Extended long time measuring reliability.
• Laser sighting on/off is switchable.
• High DS ratio.
• Backlight LCD display.
• Electronic trigger lock.
• Option to select °C/°F
• Battery operated.

G450M-11020K G450 Multi-Gas Detector, CH4, O2 - Value Kit (MSHA approved version), Rechargeable with single charger by GfG

GfG is one of the industry's leading producers of workplace safety products. Their products are safe, reliable, and customizable. Their state of the art research and development facility produces the most advanced products on the market. Additionally, their dedicated team of safety professionals works to ensure that each product can be equipped with customization tools and modifications to ensure that each product can be optimized to meet the most rigorous workplace safety standards. Introducing the G450 Multi-gas Detector, GfG is continuing its legacy as a safety leader.

G450 Multi-gas Detector

The G450 Multi-gas Detector continually measures up to four separate atmospheric gases. In confined spaces, the detector will monitor LEL combustible gas, oxygen, H2S, and CO. The easy to use G450 series of detectors is designed with user friendliness in mind. Many of its most common functions are operated with a single button, and the unit features a fully automatic calibration system. Users need only to attach the adaptor and flow gas to the sensors. The unit's GfG AutoCal system will automatically initiate the calibration sequence and will update the necessary information on the G450 Multi-gas Detector.

Long Battery Life

The G450 Multi-gas Detector also features a long life battery operation that is most efficient for workplace safety. The device has a batter life of up to 25 hours of continuous operation. With alkaline packs, the units are powered by 2 AA batteries, and when placed in the drop in cradle, the rechargeable battery packs can be fully recharged in less than 4 hours. The rechargeable packs have optional flash light LEDs to indicate charge level.

Triple Alarm System

This unit features an elaborate alarm system that is not to be missed. The triple alarm system features a loud audible alarm of 103dB, a vibrating alarm, and bright 360 wrap around LEDs with a colored backlit display for visual alarms. The alarm system ensures that users and those nearby are fully aware of possible environmental hazards. Additionally, the easy to read backlit display will light varying colors from green, orange, and red to intuitively notify users of the severity of the conditions.

Features

The G450 Multi-gas Detector is encased in a dust proof and highly water resistant housing. The housing even contains a built in rubber boot to help protect from regular wear and tear. Each unit is equipped with datalogging capabilities. The datalogger records and internally stores all activity and environmental conditions. Users can download this information to their computers and use it to research, analyze, and evaluate the jobsite environment.

The multi-gas detection system comes standard with a few accessories including a calibration adaptor, a training manual, and a training DVD. The rechargeable devices include the previous accessories and additional drop in cradle chargers and a wall power adaptor. Optional accessories include a datalogging kit, self powered attachable motorized sample pump, spare battery packs, and rechargeable battery packs. The breadth of available accessories helps to ensure that the G450 Multi-gas Detector can be customized to meet the needs of individual work spaces.

1003 "Pistol Grip" Electric Deadman Remote Control Switch by Western Technology

The most advanced 2-WIRE SEALED ELECTRIC DEADMAN CONTROL on the market. Suitable for any electric remote control system, the 1003 Pistol Grip is designed specifically for fueling with ergonomic, trigger-activated pistol grip design for operator comfort and improved safety.

Features

• All polyurethane construction (rubber-like material)
• Sealed body
• Two-wire system
• Suitable for any electric deadman remote control system
• Advanced ergonomic, trigger-activated pistol grip design for operator comfort and improved safety
• Preferred by contractors worldwide for maximum safety and reliability in extremely harsh conditions
• Designed specifically for fueling
• NEMA 4 rated for wet or dry locations
• Built to order
• UL Listed switch
• Ideal for indoor or outdoor use
• Additional options include: coiled cord, Extreme Cable, sparkproof cable reels, made to order cable length, wireless configuration

81-SDM03-01 SDM-03 Single Point Calibration Station for 03 Series, with AC Adaptor, Flash Drive, USB Cable, Tubing & Installation CD by RKI Instruments

Stand Alone Station

Multi Module System

Stand Alone Station Features:

• Stand-alone station (no PC Required)
• Calibration
• Bump Test
• Save Bump Test and Calibration records
• Bump test and calibration records copy to USB jump drive
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Calibration
• Bump Test
• Automatic calibration/bump test option
• Configure 03 Series parameters
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

Part Number: W03-3006-000

Part Number: CP-AF-K2

94021 Aluminum Dew Shield with Cover Cap - 8" by Celestron

The Celestron Aluminum Dew Shield with Cover Cap is an essential accessory that protects your telescope tube in the field. The dew shield reduces radiative cooling of the Schmidt corrector lens to the night sky, thus keeping the lens below the dew point longer preventing dew formation on the lens. Additionally, the Aluminum Dew Shield increases image contrast by blocking stray light from entering the telescope for better viewing and astroimaging. Use the Aluminum Dew Shield on your 8 EdgeHD, RASA, or Schmidt Cassegrain (made after 2006) telescope tube confidently, knowing it was created for your exact instrument.

Construction

The Aluminum Dew Shield provides a perfect, custom fit for 8" Celestron telescope tubes. The exterior of the dew shield is a rigid, aluminum cylinder that will not fold, flex, or deform. Inside, a velvet-lined interior absorbs any additional stray light and excess moisture, creating optimal contrast when viewing and imaging. Attach the dew shield to your telescope tube with the two adjustable clips to ensure a snug fit.

We've also constructed the cover cap from durable yet lightweight aluminum. When your telescope is not in use, place the cover cap on your dew shield to protect your Schmidt corrector from stray dust particles. The cover cap also offers you the ability to quickly and easily acquire dark frames for imaging.

If you're an astroimager who enjoys using your Schmidt-Cassegrain or EdgeHD in the Fastar/Hyperstar configuration or the RASA, you're probably used to running cables out the front of the dew shield. Simplify and streamline your setup with the Aluminum Dew Shield's integrated cable management slot at the base. This slot gives you an easy way to corral essential cables (like the ones for our Dew Heater rings) without potentially allowing light pollution to leak in. Also, there are cutouts to accommodate dovetail rails on the top and bottom of the telescope tube, ensuring a good fit regardless of the configuration.

Enhance your setup

When purchasing this item, you will receive 2x adhesive Celestron logo labels. Use them on your dew shield or anywhere else you like!

Check out the 8" Dew Heater ring and the Smart DewHeater and Power Controllers to optimize your setup for the ideal dew-free night of observing and imaging.

• Fits 8" Schmidt-Cassegrain, EdgeHD, and RASA telescope tubes
• Helps prevent dew formation on the Schmidt corrector lens
• Prevents off-axis glare from entering the optical system
• Rigid body with a velvet-lined interior surface to reduce stray light
• Two adjustable clips for easy installation and disassembly
• Cable management at the base of the shield–perfect for using the Fastar/Hyperstar configuration or using in conjunction with the Celestron Dew Heater Rings
• An included cover cap keeps your telescope free from dust when not in use