All Products

Part Number: 10L-353

600-0062-000 Nitrogen, 100%, 34L Steel Cylinder by RAE Systems

Standard single-gas and multi-gas mixtures for monitor calibration

• Sizes range from 11 liters to 103 liters
• Convenient multi-gas mixtures
• Choose between demand-flow and constant-flow regulators

2811-707-001 EC 28 Gas Transmitter with Sensor, Carbon Monoxide (CO), No Display by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG s proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

*Please note we can only ship RKI products to customers within the United States

LabSen 331 POM-body pH Electrode for Wastewater Treatment by Apera

Backed by proprietary Swiss sensor technology and materials, the LabSen® 331 POM Combination pH Electrode is designed for testing wastewater, emulsion, suspension, and samples containing protein and sulfide.

LabSen unique blue hemispherical glass membrane - faster response time, better repeatability, and built tough, highly resistant to general impact (totally differentiates from the traditional fragile glass bulb membrane).

Polymer Electrolyte - The solid polymer electrolyte is in direct contact with test samples. The anti-pressure capacity can reach up to 6 bars, making it ideal for testing suspension and wastewater. No more frustrating clogged junctions.

Long-Life Reference System - The LabSen 331 pH electrode adopts a long-life reference system, which is composed of a glass tube, AgCl, and a reference silver wire. The top end of the slim glass tube is stuffed with cotton, which prevents the reaction between AgCl and electrolyte when the temperature changes. It improves the stability of reference electrode and extends the service life of the electrode.

The electrode uses a BNC connector, compatible with any pH meters that use BNC connectors, such as Apera Instruments MP511, PH850, PH8500, PH700, PH910, PH950, PH820 and PC820. The temperature sensor is not built-in. Users need to have a separate temperature probe (ex: Apera Instruments MP500) to enable ATC or manually input temperature to realize temperature compensation.

The electrode is backed up with a 6-month warranty by Apera Instruments.

• Proprietary pH sensor technology and materials from Switzerland
• Unique LabSen® blue glass membrane, faster response rate, better repeatability, and impact-resistant
• Polymer Electrolyte, ideal for testing wastewater and suspension. No more clogged junction
• Long-Life Reference System, improving the stability of reference electrode and prolong the service life of the electrode
• POM housing, highly resistant to corrosions

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

223101 Chlorine Test Kit (Hach): Free & Total Chlorine Color Disc Test Kit by AquaPhoenix

0 - 0.68 mg/L Cl2
0 - 3.4 mg/L Cl2 Cl2
0 - 3.4 mg/L Cl2
1 - 10 mg/L Cl2

This color disc test kit uses powder DPD reagent that reacts with chlorine more quickly than tablet-form DPD, giving more accurate results. Powder DPD also has a considerable advantage over orthotolidine, a hazardous substance sometimes used as a free and total chlorine test reagent. Hach Chlorine Test Kits are manufactured by Hach to ensure compliance with stringent quality control standards. Kit contains 100 tests (50 free, 50 total).

Quickly and accurately measures free and total chlorine levels in the field or in the lab
Simple and fast color disc method

Includes two reagents, color disc, color comparator box, tube, instruction sheet, and carrying case.

CES-EX-LN-02N-30A CES-EX-LN-02N-30A LED Explosion Proof Light, 30W by Global Green

CES-EX-LN-02N series shell is strong, shock-resistant, anti-vibration, and easy to operate. The 50W power explosion-proof linear lamp can provide 5000-6000lm light efficiency, suitable for use in Class I, Division 2, Groups A,B,C and D hazardous location. The luminaire housing is made of ADC12 and 6063 aluminum alloy, the independent LED and the driver chamber with external airflow radiator provide excellent heat dissipation effect. The slender streamlined lighting design in hazardous areas allows access to limited space. IP66 protection grade, more than 50000hrs life span, excellent marine anti-corrosion performance, suitable for wet places and Marine environment. It has over-voltage, over-current and surge current protection. It has 2FT and 4FT in length.

Features

• Patent designed to be Curved Fin Shape, maximize the best heat transmit.
• Housing - Aluminum alloy (ADC12).
• Lens -tempered glass (8mm) shock & vibration resistant, super clear, >90% light transmit.
• LED: LM80 certified, high efficacy, low decay, long lifespan.130Im/W ±5, up to 6500Im.
• Protection: IP66, high protection grade for waterproof and dust-proof.

Application

• Oil & Gas Exploration
• Loading Docks Platforms
• Oil Refinery
• Petrochemical Plant
• Power Plant
• Pharmaceutical Plant
• Heavy Industrial Storage Facility
• Paper mills
• Wastewater Treatment Plants
• Shipyards

H-10-108-09 Hydrogen Chloride Colorimetric Gas Detection Tube, 1 - 20 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

*Please note we can only ship RKI products to customers within the United States

Sperian Biosystems PhD6 Multigas Detector

The Biosystems PhD6 Multigas Detector is the latest development in compact multigas detection systems. The detector is proven to be compact, efficient, and cost effective. With dual alarm systems featuring ultra-loud audible indicators and ultra-bright LED visual indicators, users and those nearby are always notified when potential hazards may be present. When developing this detector, the engineers at SperianProtection Instrumentation also developed an express docking station that would reduce calibration time and labor costs. The detection and docking station help users meet record keeping requirements and reduce the risks of human error. With the SperianBiosystems PhD6 Multigas Detector, users can rest assured that they are receiving the very best in gas detection technology.

Key Features

The Biosystems PhD6 Multigas Detector is compatible with over 19 sensor choices including:

• PID
• IR-CO2
• IR-CH4
• Conventional LEL
• Oxygen
• 15 different toxic gas sensors

The gas detector is encased in a durable solid polycarbonate case with a rubber over mold for easy handling. It has an interchangeable battery pack with both Alkaline and Li-Ion rechargeable batteries. Both battery types offer up to 24 hour run times. The unit features dual audible alarms at 92 decibels and front and side ultra-bright LED visual alarms to ensure that the user and those nearby are always notified of possible hazardous conditions. For easy interpretation, the detector has an easy to read status bar and large LCD display that notifies users of the device s functionality and calibration due date. Using the menu options, users can easily adjust a variety of the instrument s settings.

Automatic Docking Station

When developing the PhD6 Multigas Detector, product developers also created an automatic docking station (Biosystems IQ6 Express Dock) to be fully compatible with the detector. The docking station aims to reduce labor time and costs by fully automating certain aspects of instrument maintenance including calibration, functionality testing, and record keeping. Using the Express Dock, users can maintain compliance with recordkeeping requirements by simply docking the detector in the station. The station will automatically perform a variety of operations without user intervention.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation is a global leader in personal safety equipment. The company was recently acquired by Honeywell, another global leader in technology and innovation. As a Fortune 100 company, Honeywell has a vested interest in maintaining its reputation as a developer of efficient and reliable safety equipment. Sperian Protection Instrumentation helps to expand Honeywell s personal safety offerings while advancing their position in the American market. By purchasing a product by Sperian and Honeywell, customers can be assured they are receiving the very best in safety technology and equipment.

GS-CI-A-008-G Gasman Single Gas Monitor, 0-10ppm Ethylene Oxide, Rechargable Battery, Italian ATEX by Crowcon

For over 40 years, Crowcon Detection Instruments has produced state of the art gas detection devices for personal and industrial use. Building upon their reputation for reliable and innovative gas monitoring products, Crowcon introduces the Gasman personal gas monitor. Its lightweight and compact design is convenient for jobsites where workers need not be weighed down by excessive bulk and equipment. The unit conveniently clips to a pocket or helmet and operates continuously.

The Gasman personal gas monitor has numerous convenient features such as:

• One button technology
• Backlit LCD display
• Durable polycarbonate casing
• Quick response triple alert system
• Compact and lightweight design

Easy to Use

The Gasman s true one button technology is an ideal and simple design. The large glove friendly button is mounted on the front of the unit for easy access and controls all of the unit s programmable features. Also on the front, the Gasman s easy to read backlit LCD screen indicates gas readings and the battery status. The simple screen provides a clear indication of the unit s operation status. It will also alert the user 30 days in advance of when a calibration test is due. With a simple and intuitive design, Crowcon has produced a gas detector that reduces the complexities of workplace safety, and ensures workers in a straightforward manner that their equipment is on and operational.

Triple Alarm System

This portable single gas detection system features a triple alarm system that is sure to alert the user and anyone in the vicinity. The visible alarm utilizes a dual red and blue flashing LED light, and the unit houses an internal vibrating alert system. These two indicators allow for visual recognition in loud environments and working conditions. The alarm system also features a programmable audible alarm at 95 decibels. The unit is capable of a variety of alarm tones, and users can select which tone may be best for the individual workplace setting. The triple alarm system with multiple sensory indicators is sure to be noticed in almost any work environment.

Specifications

The Gasman single gas monitor is lightweight and compact, weighing less than 135 grams and with dimensions of 90 x 48 x 24 mm. The unit is available with a wide variety of gas sensors which feature various detection and alarm levels. The unit also features a quick response time of 20 seconds for flammable and toxic gases or 10 seconds for oxygen. Its datalogging feature has approximately 900 hours of storage and all events are time stamped. The battery life for this unit is incredible with 12 hours of runtime on a Rechargeable battery battery or up to 2 years on a non-Rechargeable battery.

MMT-01 Midas-M 4-20mA Transmitter by Honeywell Analytics

Bringing new visibility, reliability, and easeof-use to gas detection in semiconductor processing and industrial manufacturing.

An easy-to-use, cost-effective addition to the Honeywell gas detection portfolio, the Honeywell Midas®-M Gas Detector uses reliable sensor technology to detect more than 35 key toxic, ambient, and flammable gases - easily, quickly, and error-free.

The device monitors points up to 30 meters (100 feet) away while using patented technology to regulate flow rates and ensure error-free gas detection.

The standard power supply and communications capabilities include three onboard relays (Form C), 0 mA to 21 mA analog output, and Modbus®/TCP Ethernet digital outputs for easy connectivity to control and alarm systems' ports for optimal connectivity and service interaction.

With flexible features and options, the Midas-M Gas Detector works right out of the box and configures easily to meet your needs. Each plug-and-play sensor cartridge is pre-calibrated, so it's ready when you are. That means longer sensor life, quick-and-easy replacement, and no operator error due to incorrect or depleted sensors. With the Midas-M Gas Detector, customers can get extended sensor calibration periods, patented diagnostics, and lower cost of ownership.

FEATURES AND BENEFITS

• CLEAR VISIBILITY: The Midas-M Gas Detector is equipped with bright LEDs and an intuitive interface that provides instant alerts to gas readings or alarm levels.
• CALIBRATION COMPLETED: Factory-calibrated sensors reduce need for frequent gas testing.
• EASY INSTALLATION: Compact in size making it suitable for crowded, complex process environments where space is at a premium, the Midas-M Gas Detector is simple to install with its plugand-play capability.
• POE PROTOCOL: The detector includes the innovative Power over Ethernet (PoE) protocol - a single Ethernet connection for all power, control and communication requirements.
• INTEGRATED SECURITY: The Midas-M Gas Detector's interface includes passwordprotected menus to maintain system integrity.

APPLICATIONS

• Semiconductor processing
• Light industrial manufacturing
• University laboratories
• Aerospace
• Wastewater

Part Number: 103L-307

Part Number: P19621.15VA