All Products

2813-719-001 EC 28i Intrinsically Safe Transmitter with Sensor, Hydrogen Cyanide (HCN), No Display by GfG

Features

• Full-featured smart transmitter for oxygen or a wide range of toxic gas measurement
• Non-intrusive AutoCal calibration adjustment
• Increased safety design to reduce installation cost in potentially hazardous locations
• Intrinsically safe (i) EX-Proof version
• BVS 04 ATEX E 132 X (electrical ex-protection) II 1G EEx ia IIC T4 C 0158
• Available in two configurations: Blind (no display), Display
• Barriers are required
• EX- conduit is not required
• Reduced installation costs

10-107-30 Sulfur Dioxide Colorimetric Gas Detection Tube, 200 - 4,000 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

MPA1-81A3A6-010L0 POLI Pump usCSAc NDIR CO2/LEL/O2/H2S + CO by mPower Electronics

The POLI multi-gas meters offer 4-gas monitoring of toxic gases, oxygen (O₂), combustibles (LEL), carbon dioxide (CO₂) and volatile organic compounds (VOCs). The POLI MP400P is an advanced model with built-in pump that allows a full selection of sensors for a wide range of applications, including Confined Space Entry, while the POLI MP400 is a basic, 4-gas diffusion detector for worker safety at hazardous locations. Smart sensors carry calibration and ID information with them for quick exchange in the field during Hazmat response. Specific sensors include electrochemical (EC) for carbon monoxide (CO), hydrogen sulfide (H₂S), ammonia (NH₃), hydrogen cyanide (HCN), hydrogen chloride (HCl), chlorine (Cl₂), chlorine dioxide (ClO₂), nitric oxide (NO), nitrogen dioxide (NO₂), sulfur dioxide (SO₂), ethylene oxide, methyl mercaptan, and others. Also available are pellistor for LEL level combustibles, non-dispersive infrared (NDIR) for Vol% level CO₂ or methane, and photo-ionization detector (PID) for ppm level VOCs. Use of combination CO/H₂S or SO₂/H₂S and CH₄/CO₂ sensors allows up to 6 gas measurements in a single instrument. The MP400/400P has rugged construction and easy-to-learn 2-button operation. The unique Man-Down alarm feature notifies team workers wirelessly if a user becomes incapacitated.

Features, Functions and Benefits

• Wide selection of "plug-and-play" Smart Sensors (carry calibration data)
• 4 Sensor slots for up to 6 gas measurements using combination sensor
• 16-Hour rechargeable Li-ion battery
• Pump-off switch and low-power sensor options save battery for longer operation
• 360-Degree LED alarm bar and Man-Down alarm; Flip screen
• USB Micro charger & communications cable
• Optional POLI MonoDock station for automated bump test and calibration
• 6 Months continuous datalogging
• Durable double shot outer case
• Wireless remote team communication available (see mSquad & mPlatoon datasheets)
• Mobile App for POLI simulation and training in smartphone or tablet

NOVO LIGHT 2-Gas Novo Economical Kit: Long-Life O2, CO, CO2, no Printer, CO-Dilution, Combustion Efficiency, Excess Air, Draft, Pressure, Temperature, 7" Probe with 6' Hose, No Carrying Case, Mobile Apps (iOS and Android), No PRO Mode, No Heat Exchanger Test by Seitron Americas

• 7" Touch Screen for easy menu navigation
• Simultaneous Gas Pressure + Combustion Measurements
• Optional Built-in Printer
• Long Life O2 Sensor (4 Years)
• New Dual Range (Low/High) Sensor Technology
• Low NOx and SOx sensors
• 15 Preprogrammed Fuels
• Including Natural Gas, Oil, Propane, & Biofuels
• CO Protection Dilution Pump
• Rechargeable Li-Ion Batteries
• Integrated water trap with LED backlight for easy maintenance
• Differential Pressure Manometer
• Draft Measurement
• Mobile App for iOS and Android

Every Kit Includes

• Combustion Analyzer
• Gas probe with 12" (300 mm) interchangeable tip
• 10 ft (3m) Single Connection Hose
• Integrated water trap
• Manometer Hoses
• Outdoor Combustion Air Temp Probe
• AC Power Adapter & Cable
• Hard plastic kit case
• Quick Guide
• Calibration Certificate

Main Features

• Precalibrated Gas Sensors
• Field Replaceable
• Altitude Adjustment
• Integrated magnets
• Automatic autozero (with gas sampling probe inserted in the chimney)
• Self-diagnosis with verification of the functions and status of the sensors
• Language selectable by User
• 100,000 test memory
• Dimensions: Analyzer 10.6x3.6x2.7in (270x93x68mm), weight 2 lbs (0.9Kg) - Kit 5x18x13in (125x465x335mm), weight 11 lbs (5Kg)

Measured Values

• Differential Flue Gas and Ambient Air Temperatures
• Incoming Air Temperature and Ambient Air Temperature
• Draft and Differential Pressure
• Ambient CO
• O2 and CO in flue gas

Calculated Values

• Combustion Efficiency, including condensing units
• Stack losses and excess air
• Flow velocity with optional Pitot tube
• CO Air Free

72-5201RKT Eagle Portable Monitor for LEL & PPM/O2 with Teflon Hose for Heavy Hydrocarbons by RKI Instruments

The Eagle Portable Monitor can simultaneously detect up to 6 different gases. With over 400 gas monitoring configurations, the unit can detect a wide range of toxic gases. RKI Industries offers long life protection for workplace safety and hazardous jobsites. With a reputation for advanced engineering and state of the art technology, the RKI Industries' Eagle One to Six Gas Portable Monitor is an industry leader in accuracy and affordability.

Features

The Eagle One to Six Gas Portable Monitor is available with a wide variety of exclusive features. The unit is capable of PPM/LEL hydrocarbon detection and for environmental use, has a methane elimination switch. The dual hydrophobic filters (available on some models) ensure quality control. To preserve the integrity and safety of the device, the portable monitor also has an adjustment lockout switch to prevent tampering. For quick and easy testing, the monitor offers autocalibration and single gas calibration.

The Eagle is housed in an ergonomic RFI, EMI, chemical, and weather resistant polycarbonate and polyester enclosure. It can operate in the rain or in 2 inches of water without damage. It features an ergonomically designed top handle to ensure durability.

Accessories and Options

IR Sensors are available for CO2, % LEL CH4 or HC, and % volume CH4 or HC. Each unit also has datalogging capabilities for research, evaluation, and analysis of worksite atmospheres. The unit comes standard with several accessories including a shoulder strap, alkaline batteries, a hydrophobic probe, a 5 foot hose, and an internal hydrophobic filter with most models. Optional accessories can be purchased to fully customize the portable monitor to meet specific needs including a datalogging kit, remote alarms, dilution fitting, Ni-Cad batteries, battery chargers, continuous operation adapter, extra loud buzzer, extension probes, and large internal hydrophobic filter.

Specifications

The Eagle has a battery life of up to 30 hours of continuous operation with alkaline or Ni-cad capability and a sensor life of approximately 2 years. Its standard weight is approximately 5 pounds with dimensions of 10.5 L x 5.9 W x 7 H. The formidable long life pump (with a life of approximately 6,000 hours) reaches up to 125 feet in range with filters and has a low flow pump shut off and alarm. The unit has a response time of up to 30 seconds for most gases, and features a double alarm of audible alerts at 85 dB and visual alerts of dual high intensity LEDs and a flashing display screen.

The display screen is an easy to read 4 x 20 LCD readout. The backlit display sits at the top of the unit for full visibility, and displays the readings and statuses of 4 channels simultaneously.

The portable monitor is rated as intrinsically safe and has a standard 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

BK-1000-P Beaker, Plastic 1000mL by AquaPhoenix

Continuously use Nalgene™ PMP Griffin Low-Form Beakers at temperatures of 150°C with intermittent service to 175°C. These polymethylpentene beakers have the transparency of glass, excellent chemical resistance and heat tolerance. All sizes of beakers have easy to read, silk-screened graduations.

10-109-20 Nitrogen Oxides Colorimetric Gas Detection Tube, 1 - 50 ppmv (5 Colorimetric Tubes and 5 Pre-Tubes) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

PM4ZLHX001SE Be Safe 3-Gas Portable Gas Detector Kit, Device configured with O2, H2S, LEL (CH4), Designed for ATEX Zone 0, Kit includes Calibration cap, Quick Guide, Test report, Declaration of conformity ATEX and IECEx by Seitron Americas

Be Safe SG is the new portable single gas detector, designed to be compact, robust and easy to use. Configurable for 1 gas including O2, CO, H2S or SO2, it can be used in hazardous areas with explosion risk.

Portable Gas Detector

• 24 months of continuous operation
• Reliable detection of low concentrations of toxic and flammable gases
• Durable and easy to operate
• Integrated alligator clip
• Intrinsically safe
• Self-test function
• Event log storage
• Approved for ATEX Zone 0

Be Safe SG Kit includes:

• Portable gas detector
• Calibration cap
• Quick Guide
• Test report
• Declaration of conformity ATEX and IECEx

• INCREASED SAFETY: Built-in audible, vibration and visual alarms for an immediate danger warning.
• SOLID AND RELIABLE: The rugged and solid housing ensures precise and safe detection in all environments.
• CONTINUOUS PROTECTION: Designed to guarantee continuous operation for 24 months without any need to replace sensors or battery.
• EASY TO USE: Designed from the ground up to ensure the greatest ease of use and intuitiveness possible.

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

6202-5124 IAM-100 Gas Detector, Remote Sensor/Faceplate, R11 0-1000ppm, 220 VAC by Bacharach

The IAM-100 Gas Monitor from Bacharach offers exceptional continuos monitoring performance and flexibility at an economical price. By itself, or integrated into a comprehensive detection system, the IAM-100 is a scalable solution for detecting a variety of refrigerants, combustible gases and VOC gas leaks at the lowest possible cost.

Onboard LEDs illuminate when the sensor is in an alarm state while the unit's audible alarm alerts personnel in the area that levels have exceeded the desired limit. The audible alarm can be muted with the onboard silence switch. Integrated dual relays enable the IAM-100 to shut-off refrigerant or propane supply lines while the second relay can be used as a connection to a building BMS or BAS system.

The IAM-100 is an alarm threshold device. When the range of the sensor is exceeded, the detector will go into alarm. For example, a unit with a 1,000 ppm R-410a sensor will activate its alarm when the detected refrigerant meets or exceeds 1,000 ppm.

Features & Benefits:

• Real-time continuous gas detection that's scalable, reliable and affordable
• Ideal for commercial applications such as hotel rooms, apartments, dorms, hospitals, restaurant kitchens or battery charging rooms
• Detects refrigerants (at ?1,000 or ?10,000 ppm), TVOCs (at ?1,000 ppm), combustible gases and hydrocarbons (at ?5,000 ppm)
• Fast-responding, long-life sensors
• Integrated visual LED and audible alarms
• Two onboard relays to activate shut-off valves, exhaust fans, or connect to a BMS or fire panel
• Remote sensor with aesthetic faceplate available for discreet monitoring in decorative interiors

CONTPH pH Controller by Bluelab

Fine-tunes the reservoir pH levels for you. Confidence - your pH is taken care of.

Automatic measuring and adjusting to pre-set pH levels with optional alarms. Provides consistent control of pH in growing sytems.

Intuitive "on time" and "off time" allows the solution to dose and mix before the controller measures and doses again.

Reassurance with safety lockouts to prevent over delivery of pH.

Probe cable length: 2 meters / 6.5 feet

Features

• Automatic control of pH level in systems with reservoirs up to 200 gallons / 760 litres
• Dose either pH up or pH down adjusters
• Replaceable double junction pH probe & peristaltic pump
• Plant-safe green backlit LCD with adjustable brightness
• Large, easy to read display
• Easy to navigate menu to adjust settings
• Simple push button pH calibration with on screen instructions
• Flashing high and low alarms with control lockouts
• Water resistant, wall mount design
• Separate Bluelab® Temperature Probe (for pH ATC)

Sperian Biosystems PhD6 Multigas Detector

The Biosystems PhD6 Multigas Detector is the latest development in compact multigas detection systems. The detector is proven to be compact, efficient, and cost effective. With dual alarm systems featuring ultra-loud audible indicators and ultra-bright LED visual indicators, users and those nearby are always notified when potential hazards may be present. When developing this detector, the engineers at SperianProtection Instrumentation also developed an express docking station that would reduce calibration time and labor costs. The detection and docking station help users meet record keeping requirements and reduce the risks of human error. With the SperianBiosystems PhD6 Multigas Detector, users can rest assured that they are receiving the very best in gas detection technology.

Key Features

The Biosystems PhD6 Multigas Detector is compatible with over 19 sensor choices including:

• PID
• IR-CO2
• IR-CH4
• Conventional LEL
• Oxygen
• 15 different toxic gas sensors

The gas detector is encased in a durable solid polycarbonate case with a rubber over mold for easy handling. It has an interchangeable battery pack with both Alkaline and Li-Ion rechargeable batteries. Both battery types offer up to 24 hour run times. The unit features dual audible alarms at 92 decibels and front and side ultra-bright LED visual alarms to ensure that the user and those nearby are always notified of possible hazardous conditions. For easy interpretation, the detector has an easy to read status bar and large LCD display that notifies users of the device s functionality and calibration due date. Using the menu options, users can easily adjust a variety of the instrument s settings.

Automatic Docking Station

When developing the PhD6 Multigas Detector, product developers also created an automatic docking station (Biosystems IQ6 Express Dock) to be fully compatible with the detector. The docking station aims to reduce labor time and costs by fully automating certain aspects of instrument maintenance including calibration, functionality testing, and record keeping. Using the Express Dock, users can maintain compliance with recordkeeping requirements by simply docking the detector in the station. The station will automatically perform a variety of operations without user intervention.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation is a global leader in personal safety equipment. The company was recently acquired by Honeywell, another global leader in technology and innovation. As a Fortune 100 company, Honeywell has a vested interest in maintaining its reputation as a developer of efficient and reliable safety equipment. Sperian Protection Instrumentation helps to expand Honeywell s personal safety offerings while advancing their position in the American market. By purchasing a product by Sperian and Honeywell, customers can be assured they are receiving the very best in safety technology and equipment.

2811-736-001M EC 28 Gas Transmitter with MODBUS, Hydrogen Chloride (HCl), No Display by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG s proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

M020-21211-111 QRAE 3 LEL / H2S / CO / O2 Multigas Monitor - Diffusion, Wireless, Accessories Kit by RAE Systems

The QRAE 3 is a full featured compact 4-gas monitor that provides detection and monitoring of Oxygen (O2), Combustibles and toxic gases that include Carbon Monoxide (CO), Hydrogen Sulfide (H2S), Sulfure Dioxide (SO2) and Hydrogen Cyanide (HCN) and others.

QRAE 3 can deliver wireless real-time instrument readings and alarm status 24/7. This provides better incident visibility and can improve response time.

Monitor-only configuration includes

• Monitor as specified
• Sensors as specified
• Sampling option as specified
• Calibration adapter (diffusion model only)
• T Calibration tube (pumped model only)
• Internal filters (mounted - diffusion model only)
• External filters (one mounted plus pack of 3 - pumped model only)
• Travel charger cradle with computer cable
• Lithium-ion battery pack
• Universal wall adapter
• CD ROM with ProRAE Studio II
• CD ROM with product content
• Quick Reference Guide

Key Features

• Available in Diffusion or Pumped version
• IP-65/67 water and dust resistant case
• Strong, protective, concussion-proof design
• Real-time gas concentration readings and alarm status enabled by state-of-the-art wireless technology
• Unmistakable five-way local and remote wireless notification of alarm conditions
• Large graphical display icon-driven user interface through intuitive, simple-to-operate two-button user interface
• Multi-language support: 18 languages encoded
• Easy access to pump, sensors, filter and battery compartment

Applications

• Industrial safety
• Oil and gas
• Fireground "Toxic Twins" detection
• Environmental
• Fire and Emergency response
• Chemical
• Pharmaceutical
• Telecommunications